sungmg/mutter-performance-source
1
0
Fork 0
Code Activity
mutter-performance-source/cogl/cogl-path.c

1267 lines
32 KiB
C
Raw Normal View History

cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
/*
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
*
* Copyright (C) 2007,2008,2009,2010 Intel Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
Remove mentions of the FSF address Since using addresses that might change is something that finally the FSF acknowledge as a plausible scenario (after changing address twice), the license blurb in the source files should use the URI for getting the license in case the library did not come with it. Not that URIs cannot possibly change, but at least it's easier to set up a redirection at the same place. As a side note: this commit closes the oldes bug in Clutter's bug report tool. http://bugzilla.openedhand.com/show_bug.cgi?id=521
2010-03-01 12:56:10 +00:00
* License along with this library. If not, see <http://www.gnu.org/licenses/>.
*
*
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "cogl.h"
#include "cogl-internal.h"
#include "cogl-context.h"
#include "cogl-journal-private.h"
#include "cogl-material-private.h"
#include "cogl-framebuffer-private.h"
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
#include "cogl-path-private.h"
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
#include <string.h>
#include <math.h>
#define _COGL_MAX_BEZ_RECURSE_DEPTH 16
#ifdef HAVE_COGL_GL
#define glClientActiveTexture ctx->drv.pf_glClientActiveTexture
#endif
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
static void _cogl_path_free (CoglPath *path);
COGL_HANDLE_DEFINE (Path, path);
static void
_cogl_path_modify (CoglPath *path)
{
/* This needs to be called whenever the path is about to be modified
to implement copy-on-write semantics. Note that the current
mechanism assumes that a path will only ever be appended to (ie,
the path won't be cleared or have nodes in the middle
changed). This means that we don't need to keep track of how many
copies a node has because the copies can just keep track of the
number of nodes they should draw */
/* If this path is a copy then we need to actually copy the data so
we can modify it */
if (path->parent_path)
{
CoglPath *old_path = COGL_PATH (path->parent_path);
CoglPathNode *old_nodes = &g_array_index (old_path->path_nodes,
CoglPathNode, 0);
CoglPathNode *new_nodes;
int i;
path->path_nodes = g_array_new (FALSE, FALSE, sizeof (CoglPathNode));
/* The parent path may have extra nodes added after the copy was
made so we need to truncate it */
g_array_set_size (path->path_nodes, path->path_size);
memcpy (path->path_nodes->data, old_nodes,
sizeof (CoglPathNode) * path->path_size);
/* We need to make sure the last path size doesn't extend past
the total path size */
new_nodes = &g_array_index (path->path_nodes, CoglPathNode, 0);
for (i = 0; i < path->path_size; i += new_nodes[i].path_size)
cogl-path: Fix the truncation when adding to a copied path If a path is copied and then appended to, the copy needs to have the last sub path truncated so that it fits in the total path size in case the original path was modified. However the path size check was broken so if the copied path had more than one sub path it would fail.
2010-04-21 21:36:43 +00:00
if (i + new_nodes[i].path_size >= path->path_size)
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
new_nodes[i].path_size = path->path_size - i;
cogl_handle_unref (path->parent_path);
path->parent_path = COGL_INVALID_HANDLE;
}
}
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
static void
_cogl_path_add_node (gboolean new_sub_path,
float x,
float y)
{
CoglPathNode new_node;
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
_cogl_path_modify (path);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
new_node.x = x;
new_node.y = y;
new_node.path_size = 0;
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
if (new_sub_path || path->path_size == 0)
path->last_path = path->path_size;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
g_array_append_val (path->path_nodes, new_node);
path->path_size++;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
g_array_index (path->path_nodes, CoglPathNode, path->last_path).path_size++;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
if (path->path_size == 1)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path->path_nodes_min.x = path->path_nodes_max.x = x;
path->path_nodes_min.y = path->path_nodes_max.y = y;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
else
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
if (x < path->path_nodes_min.x) path->path_nodes_min.x = x;
if (x > path->path_nodes_max.x) path->path_nodes_max.x = x;
if (y < path->path_nodes_min.y) path->path_nodes_min.y = y;
if (y > path->path_nodes_max.y) path->path_nodes_max.y = y;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
}
static void
_cogl_path_stroke_nodes (void)
{
unsigned int path_start = 0;
unsigned long enable_flags = COGL_ENABLE_VERTEX_ARRAY;
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
CoglMaterialFlushOptions options;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_cogl_journal_flush ();
/* NB: _cogl_framebuffer_flush_state may disrupt various state (such
* as the material state) when flushing the clip stack, so should
* always be done first when preparing to draw. */
_cogl_framebuffer_flush_state (_cogl_get_framebuffer (), 0);
enable_flags |= _cogl_material_get_cogl_enable_flags (ctx->source_material);
cogl: rename cogl_enable to _cogl_enable Every now and then someone sees the cogl_enable API and gets confused, thinking its public API so this renames the symbol to be clear that it's is an internal only API.
2010-03-19 09:16:08 +00:00
_cogl_enable (enable_flags);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
options.flags = COGL_MATERIAL_FLUSH_DISABLE_MASK;
/* disable all texture layers */
options.disable_layers = (guint32)~0;
_cogl_material_flush_gl_state (ctx->source_material, &options);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
while (path_start < path->path_size)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPathNode *node = &g_array_index (path->path_nodes, CoglPathNode,
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
path_start);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
GE( glVertexPointer (2, GL_FLOAT, sizeof (CoglPathNode), &node->x) );
/* We need to limit the size of the sub path to the size of our
path in case this path is a copy and the parent path has
grown */
GE( glDrawArrays (GL_LINE_STRIP, 0,
MIN (node->path_size, path->path_size - path_start)) );
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path_start += node->path_size;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
}
static void
_cogl_path_get_bounds (floatVec2 nodes_min,
floatVec2 nodes_max,
float *bounds_x,
float *bounds_y,
float *bounds_w,
float *bounds_h)
{
*bounds_x = nodes_min.x;
*bounds_y = nodes_min.y;
*bounds_w = nodes_max.x - *bounds_x;
*bounds_h = nodes_max.y - *bounds_y;
}
void
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
_cogl_add_path_to_stencil_buffer (CoglHandle path_handle,
gboolean merge,
gboolean need_clear)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
{
unsigned int path_start = 0;
float bounds_x;
float bounds_y;
float bounds_w;
float bounds_h;
unsigned long enable_flags = COGL_ENABLE_VERTEX_ARRAY;
CoglHandle prev_source;
int i;
CoglHandle framebuffer = _cogl_get_framebuffer ();
CoglMatrixStack *modelview_stack =
_cogl_framebuffer_get_modelview_stack (framebuffer);
CoglMatrixStack *projection_stack =
_cogl_framebuffer_get_projection_stack (framebuffer);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (path_handle);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
/* We don't track changes to the stencil buffer in the journal
* so we need to flush any batched geometry first */
_cogl_journal_flush ();
/* NB: _cogl_framebuffer_flush_state may disrupt various state (such
* as the material state) when flushing the clip stack, so should
* always be done first when preparing to draw. */
_cogl_framebuffer_flush_state (framebuffer, 0);
/* Just setup a simple material that doesn't use texturing... */
prev_source = cogl_handle_ref (ctx->source_material);
cogl_set_source (ctx->stencil_material);
_cogl_material_flush_gl_state (ctx->source_material, NULL);
enable_flags |=
_cogl_material_get_cogl_enable_flags (ctx->source_material);
cogl: rename cogl_enable to _cogl_enable Every now and then someone sees the cogl_enable API and gets confused, thinking its public API so this renames the symbol to be clear that it's is an internal only API.
2010-03-19 09:16:08 +00:00
_cogl_enable (enable_flags);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
_cogl_path_get_bounds (path->path_nodes_min, path->path_nodes_max,
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
&bounds_x, &bounds_y, &bounds_w, &bounds_h);
GE( glEnable (GL_STENCIL_TEST) );
GE( glColorMask (FALSE, FALSE, FALSE, FALSE) );
GE( glDepthMask (FALSE) );
if (merge)
{
GE (glStencilMask (2));
GE (glStencilFunc (GL_LEQUAL, 0x2, 0x6));
}
else
{
/* If we're not using the stencil buffer for clipping then we
don't need to clear the whole stencil buffer, just the area
that will be drawn */
if (need_clear)
cogl_clear (NULL, COGL_BUFFER_BIT_STENCIL);
else
{
/* Just clear the bounding box */
GE( glStencilMask (~(GLuint) 0) );
GE( glStencilOp (GL_ZERO, GL_ZERO, GL_ZERO) );
cogl_rectangle (bounds_x, bounds_y,
bounds_x + bounds_w, bounds_y + bounds_h);
/* Make sure the rectangle hits the stencil buffer before
* directly changing other GL state. */
_cogl_journal_flush ();
/* NB: The journal flushing may trash the modelview state and
* enable flags */
_cogl_matrix_stack_flush_to_gl (modelview_stack,
COGL_MATRIX_MODELVIEW);
cogl: rename cogl_enable to _cogl_enable Every now and then someone sees the cogl_enable API and gets confused, thinking its public API so this renames the symbol to be clear that it's is an internal only API.
2010-03-19 09:16:08 +00:00
_cogl_enable (enable_flags);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
GE (glStencilMask (1));
GE (glStencilFunc (GL_LEQUAL, 0x1, 0x3));
}
GE (glStencilOp (GL_INVERT, GL_INVERT, GL_INVERT));
for (i = 0; i < ctx->n_texcoord_arrays_enabled; i++)
{
GE (glClientActiveTexture (GL_TEXTURE0 + i));
GE (glDisableClientState (GL_TEXTURE_COORD_ARRAY));
}
ctx->n_texcoord_arrays_enabled = 0;
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
while (path_start < path->path_size)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPathNode *node =
&g_array_index (path->path_nodes, CoglPathNode, path_start);
GE (glVertexPointer (2, GL_FLOAT, sizeof (CoglPathNode), &node->x));
/* We need to limit the size of the sub path to the size of our
path in case this path is a copy and the parent path has
grown */
GE (glDrawArrays (GL_TRIANGLE_FAN, 0,
MIN (node->path_size, path->path_size - path_start)));
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path_start += node->path_size;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
if (merge)
{
/* Now we have the new stencil buffer in bit 1 and the old
stencil buffer in bit 0 so we need to intersect them */
GE (glStencilMask (3));
GE (glStencilFunc (GL_NEVER, 0x2, 0x3));
GE (glStencilOp (GL_DECR, GL_DECR, GL_DECR));
/* Decrement all of the bits twice so that only pixels where the
value is 3 will remain */
_cogl_matrix_stack_push (projection_stack);
_cogl_matrix_stack_load_identity (projection_stack);
_cogl_matrix_stack_flush_to_gl (projection_stack,
COGL_MATRIX_PROJECTION);
_cogl_matrix_stack_push (modelview_stack);
_cogl_matrix_stack_load_identity (modelview_stack);
_cogl_matrix_stack_flush_to_gl (modelview_stack,
COGL_MATRIX_MODELVIEW);
cogl_rectangle (-1.0, -1.0, 1.0, 1.0);
cogl_rectangle (-1.0, -1.0, 1.0, 1.0);
/* Make sure these rectangles hit the stencil buffer before we
* restore the stencil op/func. */
_cogl_journal_flush ();
_cogl_matrix_stack_pop (modelview_stack);
_cogl_matrix_stack_pop (projection_stack);
}
GE (glStencilMask (~(GLuint) 0));
GE (glDepthMask (TRUE));
GE (glColorMask (TRUE, TRUE, TRUE, TRUE));
GE (glStencilFunc (GL_EQUAL, 0x1, 0x1));
GE (glStencilOp (GL_KEEP, GL_KEEP, GL_KEEP));
/* restore the original material */
cogl_set_source (prev_source);
cogl_handle_unref (prev_source);
}
static int
compare_ints (gconstpointer a,
gconstpointer b)
{
return GPOINTER_TO_INT(a)-GPOINTER_TO_INT(b);
}
static void
_cogl_path_fill_nodes_scanlines (CoglPathNode *path,
unsigned int path_size,
int bounds_x,
int bounds_y,
unsigned int bounds_w,
unsigned int bounds_h)
{
/* This is our edge list it stores intersections between our
* curve and scanlines, it should probably be implemented with a
* data structure that has smaller overhead for inserting the
* curve/scanline intersections.
*/
GSList **scanlines = g_alloca (bounds_h * sizeof (GSList *));
int i;
int prev_x;
int prev_y;
int first_x;
int first_y;
int lastdir = -2; /* last direction we vere moving */
int lastline = -1; /* the previous scanline we added to */
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* We are going to use GL to draw directly so make sure any
* previously batched geometry gets to GL before we start...
*/
_cogl_journal_flush ();
/* NB: _cogl_framebuffer_flush_state may disrupt various state (such
* as the material state) when flushing the clip stack, so should
* always be done first when preparing to draw. */
_cogl_framebuffer_flush_state (_cogl_get_framebuffer (), 0);
_cogl_material_flush_gl_state (ctx->source_material, NULL);
cogl: rename cogl_enable to _cogl_enable Every now and then someone sees the cogl_enable API and gets confused, thinking its public API so this renames the symbol to be clear that it's is an internal only API.
2010-03-19 09:16:08 +00:00
_cogl_enable (COGL_ENABLE_VERTEX_ARRAY
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
| (ctx->color_alpha < 255 ? COGL_ENABLE_BLEND : 0));
/* clear scanline intersection lists */
for (i = 0; i < bounds_h; i++)
scanlines[i]=NULL;
first_x = prev_x = path->x;
first_y = prev_y = path->y;
/* create scanline intersection list */
for (i=1; i < path_size; i++)
{
int dest_x = path[i].x;
int dest_y = path[i].y;
int ydir;
int dx;
int dy;
int y;
fill_close:
dx = dest_x - prev_x;
dy = dest_y - prev_y;
if (dy < 0)
ydir = -1;
else if (dy > 0)
ydir = 1;
else
ydir = 0;
/* do linear interpolation between vertices */
for (y = prev_y; y != dest_y; y += ydir)
{
/* only add a point if the scanline has changed and we're
* within bounds.
*/
if (y - bounds_y >= 0 &&
y - bounds_y < bounds_h &&
lastline != y)
{
int x = prev_x + (dx * (y-prev_y)) / dy;
scanlines[ y - bounds_y ]=
g_slist_insert_sorted (scanlines[ y - bounds_y],
GINT_TO_POINTER(x),
compare_ints);
if (ydir != lastdir && /* add a double entry when changing */
lastdir != -2) /* vertical direction */
scanlines[ y - bounds_y ]=
g_slist_insert_sorted (scanlines[ y - bounds_y],
GINT_TO_POINTER(x),
compare_ints);
lastdir = ydir;
lastline = y;
}
}
prev_x = dest_x;
prev_y = dest_y;
/* if we're on the last knot, fake the first vertex being a
next one */
if (path_size == i+1)
{
dest_x = first_x;
dest_y = first_y;
i++; /* to make the loop finally end */
goto fill_close;
}
}
{
int spans = 0;
int span_no;
GLfloat *coords;
/* count number of spans */
for (i = 0; i < bounds_h; i++)
{
GSList *iter = scanlines[i];
while (iter)
{
GSList *next = iter->next;
if (!next)
{
break;
}
/* draw the segments that should be visible */
spans ++;
iter = next->next;
}
}
coords = g_malloc0 (spans * sizeof (GLfloat) * 3 * 2 * 2);
span_no = 0;
/* build list of triangles */
for (i = 0; i < bounds_h; i++)
{
GSList *iter = scanlines[i];
while (iter)
{
GSList *next = iter->next;
GLfloat x_0, x_1;
GLfloat y_0, y_1;
if (!next)
break;
x_0 = GPOINTER_TO_INT (iter->data);
x_1 = GPOINTER_TO_INT (next->data);
y_0 = bounds_y + i;
y_1 = bounds_y + i + 1.0625f;
/* render scanlines 1.0625 high to avoid gaps when
transformed */
coords[span_no * 12 + 0] = x_0;
coords[span_no * 12 + 1] = y_0;
coords[span_no * 12 + 2] = x_1;
coords[span_no * 12 + 3] = y_0;
coords[span_no * 12 + 4] = x_1;
coords[span_no * 12 + 5] = y_1;
coords[span_no * 12 + 6] = x_0;
coords[span_no * 12 + 7] = y_0;
coords[span_no * 12 + 8] = x_0;
coords[span_no * 12 + 9] = y_1;
coords[span_no * 12 + 10] = x_1;
coords[span_no * 12 + 11] = y_1;
span_no ++;
iter = next->next;
}
}
for (i = 0; i < bounds_h; i++)
g_slist_free (scanlines[i]);
/* render triangles */
GE (glVertexPointer (2, GL_FLOAT, 0, coords ));
GE (glDrawArrays (GL_TRIANGLES, 0, spans * 2 * 3));
g_free (coords);
}
}
static void
_cogl_path_fill_nodes (void)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
float bounds_x;
float bounds_y;
float bounds_w;
float bounds_h;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
_cogl_path_get_bounds (path->path_nodes_min, path->path_nodes_max,
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
&bounds_x, &bounds_y, &bounds_w, &bounds_h);
if (G_LIKELY (!(cogl_debug_flags & COGL_DEBUG_FORCE_SCANLINE_PATHS)) &&
cogl_features_available (COGL_FEATURE_STENCIL_BUFFER))
{
CoglHandle framebuffer;
Separate out CoglClipStackState from cogl-clip-stack.c CoglClipStackState has now been renamed to CoglClipState and is moved to a separate file. CoglClipStack now just maintains a stack and doesn't worry about the rest of the state. CoglClipStack sill contains the code to flush the stack to GL.
2010-04-14 18:41:08 +00:00
CoglClipState *clip_state;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_cogl_journal_flush ();
framebuffer = _cogl_get_framebuffer ();
clip_state = _cogl_framebuffer_get_clip_state (framebuffer);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
_cogl_add_path_to_stencil_buffer (ctx->current_path,
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
clip_state->stencil_used,
FALSE);
cogl_rectangle (bounds_x, bounds_y,
bounds_x + bounds_w, bounds_y + bounds_h);
/* The stencil buffer now contains garbage so the clip area needs to
* be rebuilt.
*
* NB: We only ever try and update the clip state during
* _cogl_journal_init (when we flush the framebuffer state) which is
* only called when the journal first gets something logged in it; so
* we call cogl_flush() to emtpy the journal.
*/
cogl_flush ();
Separate out CoglClipStackState from cogl-clip-stack.c CoglClipStackState has now been renamed to CoglClipState and is moved to a separate file. CoglClipStack now just maintains a stack and doesn't worry about the rest of the state. CoglClipStack sill contains the code to flush the stack to GL.
2010-04-14 18:41:08 +00:00
_cogl_clip_state_dirty (clip_state);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
else
{
unsigned int path_start = 0;
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
while (path_start < path->path_size)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPathNode *node = &g_array_index (path->path_nodes, CoglPathNode,
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
path_start);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
/* We need to limit the size of the sub path to the size of
our path in case this path is a copy and the parent path
has grown */
_cogl_path_fill_nodes_scanlines (node,
MIN (node->path_size,
path->path_size - path_start),
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
bounds_x, bounds_y,
bounds_w, bounds_h);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path_start += node->path_size;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
}
}
void
cogl_path_fill (void)
{
cogl_path_fill_preserve ();
cogl_path_new ();
}
void
cogl_path_fill_preserve (void)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
if (COGL_PATH (ctx->current_path)->path_size == 0)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
return;
_cogl_path_fill_nodes ();
}
void
cogl_path_stroke (void)
{
cogl_path_stroke_preserve ();
cogl_path_new ();
}
void
cogl_path_stroke_preserve (void)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
if (COGL_PATH (ctx->current_path)->path_size == 0)
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
return;
_cogl_path_stroke_nodes ();
}
void
cogl_path_move_to (float x,
float y)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_cogl_path_add_node (TRUE, x, y);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
path->path_start.x = x;
path->path_start.y = y;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path->path_pen = path->path_start;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_rel_move_to (float x,
float y)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl_path_move_to (path->path_pen.x + x,
path->path_pen.y + y);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_line_to (float x,
float y)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
_cogl_path_add_node (FALSE, x, y);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
path->path_pen.x = x;
path->path_pen.y = y;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_rel_line_to (float x,
float y)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl_path_line_to (path->path_pen.x + x,
path->path_pen.y + y);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_close (void)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
_cogl_path_add_node (FALSE, path->path_start.x,
path->path_start.y);
path->path_pen = path->path_start;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_new (void)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
cogl_handle_unref (ctx->current_path);
ctx->current_path = _cogl_path_new ();
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_line (float x_1,
float y_1,
float x_2,
float y_2)
{
cogl_path_move_to (x_1, y_1);
cogl_path_line_to (x_2, y_2);
}
void
cogl_path_polyline (float *coords,
int num_points)
{
int c = 0;
cogl_path_move_to (coords[0], coords[1]);
for (c = 1; c < num_points; ++c)
cogl_path_line_to (coords[2*c], coords[2*c+1]);
}
void
cogl_path_polygon (float *coords,
int num_points)
{
cogl_path_polyline (coords, num_points);
cogl_path_close ();
}
void
cogl_path_rectangle (float x_1,
float y_1,
float x_2,
float y_2)
{
cogl_path_move_to (x_1, y_1);
cogl_path_line_to (x_2, y_1);
cogl_path_line_to (x_2, y_2);
cogl_path_line_to (x_1, y_2);
cogl_path_close ();
}
static void
_cogl_path_arc (float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2,
float angle_step,
unsigned int move_first)
{
float a = 0x0;
float cosa = 0x0;
float sina = 0x0;
float px = 0x0;
float py = 0x0;
/* Fix invalid angles */
if (angle_1 == angle_2 || angle_step == 0x0)
return;
if (angle_step < 0x0)
angle_step = -angle_step;
/* Walk the arc by given step */
a = angle_1;
while (a != angle_2)
{
cosa = cosf (a * (G_PI/180.0));
sina = sinf (a * (G_PI/180.0));
px = center_x + (cosa * radius_x);
py = center_y + (sina * radius_y);
if (a == angle_1 && move_first)
cogl_path_move_to (px, py);
else
cogl_path_line_to (px, py);
if (G_LIKELY (angle_2 > angle_1))
{
a += angle_step;
if (a > angle_2)
a = angle_2;
}
else
{
a -= angle_step;
if (a < angle_2)
a = angle_2;
}
}
/* Make sure the final point is drawn */
cosa = cosf (angle_2 * (G_PI/180.0));
sina = sinf (angle_2 * (G_PI/180.0));
px = center_x + (cosa * radius_x);
py = center_y + (sina * radius_y);
cogl_path_line_to (px, py);
}
void
cogl_path_arc (float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2)
{
float angle_step = 10;
/* it is documented that a move to is needed to create a freestanding
* arc
*/
_cogl_path_arc (center_x, center_y,
radius_x, radius_y,
angle_1, angle_2,
angle_step, 0 /* no move */);
}
void
cogl_path_arc_rel (float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2,
float angle_step)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
_cogl_path_arc (path->path_pen.x + center_x,
path->path_pen.y + center_y,
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
radius_x, radius_y,
angle_1, angle_2,
angle_step, 0 /* no move */);
}
void
cogl_path_ellipse (float center_x,
float center_y,
float radius_x,
float radius_y)
{
float angle_step = 10;
/* FIXME: if shows to be slow might be optimized
* by mirroring just a quarter of it */
_cogl_path_arc (center_x, center_y,
radius_x, radius_y,
0, 360,
angle_step, 1 /* move first */);
cogl_path_close();
}
void
cogl_path_round_rectangle (float x_1,
float y_1,
float x_2,
float y_2,
float radius,
float arc_step)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
float inner_width = x_2 - x_1 - radius * 2;
float inner_height = y_2 - y_1 - radius * 2;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl_path_move_to (x_1, y_1 + radius);
cogl_path_arc_rel (radius, 0,
radius, radius,
180,
270,
arc_step);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
cogl_path_line_to (path->path_pen.x + inner_width,
path->path_pen.y);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl_path_arc_rel (0, radius,
radius, radius,
-90,
0,
arc_step);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
cogl_path_line_to (path->path_pen.x,
path->path_pen.y + inner_height);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl_path_arc_rel (-radius, 0,
radius, radius,
0,
90,
arc_step);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
cogl_path_line_to (path->path_pen.x - inner_width,
path->path_pen.y);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cogl_path_arc_rel (0, -radius,
radius, radius,
90,
180,
arc_step);
cogl_path_close ();
}
static void
_cogl_path_bezier3_sub (CoglBezCubic *cubic)
{
CoglBezCubic cubics[_COGL_MAX_BEZ_RECURSE_DEPTH];
CoglBezCubic *cleft;
CoglBezCubic *cright;
CoglBezCubic *c;
floatVec2 dif1;
floatVec2 dif2;
floatVec2 mm;
floatVec2 c1;
floatVec2 c2;
floatVec2 c3;
floatVec2 c4;
floatVec2 c5;
int cindex;
/* Put first curve on stack */
cubics[0] = *cubic;
cindex = 0;
while (cindex >= 0)
{
c = &cubics[cindex];
/* Calculate distance of control points from their
* counterparts on the line between end points */
dif1.x = (c->p2.x * 3) - (c->p1.x * 2) - c->p4.x;
dif1.y = (c->p2.y * 3) - (c->p1.y * 2) - c->p4.y;
dif2.x = (c->p3.x * 3) - (c->p4.x * 2) - c->p1.x;
dif2.y = (c->p3.y * 3) - (c->p4.y * 2) - c->p1.y;
if (dif1.x < 0)
dif1.x = -dif1.x;
if (dif1.y < 0)
dif1.y = -dif1.y;
if (dif2.x < 0)
dif2.x = -dif2.x;
if (dif2.y < 0)
dif2.y = -dif2.y;
/* Pick the greatest of two distances */
if (dif1.x < dif2.x) dif1.x = dif2.x;
if (dif1.y < dif2.y) dif1.y = dif2.y;
/* Cancel if the curve is flat enough */
if (dif1.x + dif1.y <= 1.0 ||
cindex == _COGL_MAX_BEZ_RECURSE_DEPTH-1)
{
/* Add subdivision point (skip last) */
if (cindex == 0)
return;
_cogl_path_add_node (FALSE, c->p4.x, c->p4.y);
--cindex;
continue;
}
/* Left recursion goes on top of stack! */
cright = c; cleft = &cubics[++cindex];
/* Subdivide into 2 sub-curves */
c1.x = ((c->p1.x + c->p2.x) / 2);
c1.y = ((c->p1.y + c->p2.y) / 2);
mm.x = ((c->p2.x + c->p3.x) / 2);
mm.y = ((c->p2.y + c->p3.y) / 2);
c5.x = ((c->p3.x + c->p4.x) / 2);
c5.y = ((c->p3.y + c->p4.y) / 2);
c2.x = ((c1.x + mm.x) / 2);
c2.y = ((c1.y + mm.y) / 2);
c4.x = ((mm.x + c5.x) / 2);
c4.y = ((mm.y + c5.y) / 2);
c3.x = ((c2.x + c4.x) / 2);
c3.y = ((c2.y + c4.y) / 2);
/* Add left recursion to stack */
cleft->p1 = c->p1;
cleft->p2 = c1;
cleft->p3 = c2;
cleft->p4 = c3;
/* Add right recursion to stack */
cright->p1 = c3;
cright->p2 = c4;
cright->p3 = c5;
cright->p4 = c->p4;
}
}
void
cogl_path_curve_to (float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3)
{
CoglBezCubic cubic;
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
/* Prepare cubic curve */
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
cubic.p1 = path->path_pen;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
cubic.p2.x = x_1;
cubic.p2.y = y_1;
cubic.p3.x = x_2;
cubic.p3.y = y_2;
cubic.p4.x = x_3;
cubic.p4.y = y_3;
/* Run subdivision */
_cogl_path_bezier3_sub (&cubic);
/* Add last point */
_cogl_path_add_node (FALSE, cubic.p4.x, cubic.p4.y);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path->path_pen = cubic.p4;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_path_rel_curve_to (float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl_path_curve_to (path->path_pen.x + x_1,
path->path_pen.y + y_1,
path->path_pen.x + x_2,
path->path_pen.y + y_2,
path->path_pen.x + x_3,
path->path_pen.y + y_3);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglHandle
cogl_path_get (void)
{
_COGL_GET_CONTEXT (ctx, FALSE);
return ctx->current_path;
}
void
cogl_path_set (CoglHandle handle)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (!cogl_is_path (handle))
return;
/* Reference the new handle first in case it is the same as the old
handle */
cogl_handle_ref (handle);
cogl_handle_unref (ctx->current_path);
ctx->current_path = handle;
}
CoglHandle
_cogl_path_new (void)
{
CoglPath *path;
path = g_slice_new (CoglPath);
path->path_nodes = g_array_new (FALSE, FALSE, sizeof (CoglPathNode));
path->last_path = 0;
path->parent_path = COGL_INVALID_HANDLE;
path->path_size = 0;
return _cogl_path_handle_new (path);
}
CoglHandle
cogl_path_copy (CoglHandle handle)
{
CoglPath *old_path, *new_path;
_COGL_GET_CONTEXT (ctx, FALSE);
if (!cogl_is_path (handle))
return COGL_INVALID_HANDLE;
old_path = COGL_PATH (handle);
new_path = g_slice_dup (CoglPath, old_path);
new_path->parent_path = cogl_handle_ref (handle);
return _cogl_path_handle_new (new_path);
}
static void
_cogl_path_free (CoglPath *path)
{
if (path->parent_path)
cogl_handle_unref (path->parent_path);
else
g_array_free (path->path_nodes, TRUE);
g_slice_free (CoglPath, path);
}
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
/* If second order beziers were needed the following code could
* be re-enabled:
*/
#if 0
static void
_cogl_path_bezier2_sub (CoglBezQuad *quad)
{
CoglBezQuad quads[_COGL_MAX_BEZ_RECURSE_DEPTH];
CoglBezQuad *qleft;
CoglBezQuad *qright;
CoglBezQuad *q;
floatVec2 mid;
floatVec2 dif;
floatVec2 c1;
floatVec2 c2;
floatVec2 c3;
int qindex;
/* Put first curve on stack */
quads[0] = *quad;
qindex = 0;
/* While stack is not empty */
while (qindex >= 0)
{
q = &quads[qindex];
/* Calculate distance of control point from its
* counterpart on the line between end points */
mid.x = ((q->p1.x + q->p3.x) / 2);
mid.y = ((q->p1.y + q->p3.y) / 2);
dif.x = (q->p2.x - mid.x);
dif.y = (q->p2.y - mid.y);
if (dif.x < 0) dif.x = -dif.x;
if (dif.y < 0) dif.y = -dif.y;
/* Cancel if the curve is flat enough */
if (dif.x + dif.y <= 1.0 ||
qindex == _COGL_MAX_BEZ_RECURSE_DEPTH - 1)
{
/* Add subdivision point (skip last) */
if (qindex == 0) return;
_cogl_path_add_node (FALSE, q->p3.x, q->p3.y);
--qindex; continue;
}
/* Left recursion goes on top of stack! */
qright = q; qleft = &quads[++qindex];
/* Subdivide into 2 sub-curves */
c1.x = ((q->p1.x + q->p2.x) / 2);
c1.y = ((q->p1.y + q->p2.y) / 2);
c3.x = ((q->p2.x + q->p3.x) / 2);
c3.y = ((q->p2.y + q->p3.y) / 2);
c2.x = ((c1.x + c3.x) / 2);
c2.y = ((c1.y + c3.y) / 2);
/* Add left recursion onto stack */
qleft->p1 = q->p1;
qleft->p2 = c1;
qleft->p3 = c2;
/* Add right recursion onto stack */
qright->p1 = c2;
qright->p2 = c3;
qright->p3 = q->p3;
}
}
void
cogl_path_curve2_to (float x_1,
float y_1,
float x_2,
float y_2)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
CoglBezQuad quad;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
/* Prepare quadratic curve */
quad.p1 = ctx->path_pen;
quad.p2.x = x_1;
quad.p2.y = y_1;
quad.p3.x = x_2;
quad.p3.y = y_2;
/* Run subdivision */
_cogl_path_bezier2_sub (&quad);
/* Add last point */
_cogl_path_add_node (FALSE, quad.p3.x, quad.p3.y);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path->path_pen = quad.p3;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
void
cogl_rel_curve2_to (float x_1,
float y_1,
float x_2,
float y_2)
{
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
CoglPath *path;
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
path = COGL_PATH (ctx->current_path);
cogl_path_curve2_to (path->path_pen.x + x_1,
path->path_pen.y + y_1,
path->path_pen.x + x_2,
path->path_pen.y + y_2);
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
}
cogl: Support retained paths This adds three new API calls: CoglHandle cogl_path_get() void cogl_path_set(CoglHandle path) CoglHandle cogl_path_copy(CoglHandle path) All of the fields relating to the path have been moved from the Cogl context to a new CoglPath handle type. The cogl context now just contains a CoglPath handle. All of the existing path commands manipulate the data in the current path handle. cogl_path_new now just creates a new path handle and unrefs the old one. The path handle can be stored for later with cogl_path_get. The path can then be copied with cogl_path_copy. Internally it implements copy-on-write semantics with an extra optimisation that it will only copy the data if the new path is modified, but not if the original path is modified. It can do this because the only way to modify a path is by appending to it so the copied path is able to store its own path length and only render the nodes up to that length. For this to work the copied path also needs to keep its own copies of the path extents because the parent path may change these by adding nodes. The clip stack now uses the cogl_path_copy mechanism to store paths in the stack instead of directly copying the data. This should save some memory and processing time.
2010-04-08 16:43:27 +00:00
cogl: cleanly separate primitives + paths code The function prototypes for the primitives API were spread between cogl-path.h and cogl-texture.h and should have been in a cogl-primitives.h. As well as shuffling the prototypes around into more sensible places this commit splits the cogl-path API out from cogl-primitives.c into a cogl-path.c
2010-02-10 22:30:37 +00:00
#endif
Copy permalink