sungmg/mutter-performance-source
1
0
Fork 0
Code Activity
mutter-performance-source/cogl/Makefile.am

38 lines
609 B
Makefile
Raw Normal View History

move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
SUBDIRS = test-fixtures
build: Start moving to a non-recursive layout *** WARNING: THIS COMMIT CHANGES THE BUILD *** Do not recurse into the backend directories to build private, internal libraries. We only recurse from clutter/ into the cogl sub-directory; from there, we don't recurse any further. All the backend-specific code in Cogl and Clutter is compiled conditionally depending on the macros defined by the configure script. We still recurse from the top-level directory into doc, clutter and tests, because gtk-doc and tests do not deal nicely with non-recursive layouts. This change makes Clutter compile slightly faster, and cleans up the build system, especially when dealing with introspection data. Ideally, we also want to make Cogl part of the top-level build, so that we can finally drop the sed trick to change the shared library from the GIR before compiling it. Currently disabled: ‣ OSX backend ‣ Fruity backend Currently enabled but untested: ‣ EGL backend ‣ Windows backend
2010-09-13 10:30:30 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
SUBDIRS += cogl
Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys As part of an incremental process to have Cogl be a standalone project we want to re-consider how we organise the Cogl source code. Currently this is the structure I'm aiming for: cogl/ cogl/ <put common source here> winsys/ cogl-glx.c cogl-wgl.c driver/ gl/ gles/ os/ ? utils/ cogl-fixed cogl-matrix-stack? cogl-journal? cogl-primitives? pango/ The new winsys component is a starting point for migrating window system code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl. The utils/ and pango/ directories aren't added by this commit, but they are noted because I plan to add them soon. Overview of the planned structure: * The winsys/ API is the API that binds OpenGL to a specific window system, be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic under clutter/{glx,osx,win32 etc} should migrate here. * Note there is also the idea of a winsys-base that may represent a window system for which there are multiple winsys APIs. An example of this is x11, since glx and egl may both be used with x11. (currently only Clutter has the idea of a winsys-base) * The driver/ represents a specific varient of OpenGL. Currently we have "gl" representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing GLES 1.1 (fixed funciton) and 2.0 (fully shader based) * Everything under cogl/ should fundamentally be supporting access to the GPU. Essentially Cogl's most basic requirement is to provide a nice GPU Graphics API and drawing a line between this and the utility functionality we add to support Clutter should help keep this lean and maintainable. * Code under utils/ as suggested builds on cogl/ adding more convenient APIs or mechanism to optimize special cases. Broadly speaking you can compare cogl/ to OpenGL and utils/ to GLU. * clutter/pango will be moved to clutter/cogl/pango How some of the internal configure.ac/pkg-config terminology has changed: backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11" backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la" clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx" CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS clutterbackendlib -> CLUTTER_WINSYS_LIB CLUTTER_COGL -> COGL_DRIVER # e.g. "gl" Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps As the first thing to take advantage of the new winsys component in Cogl; cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into cogl/common/cogl.c and this common implementation first trys _cogl_winsys_get_proc_address() but if that fails then it falls back to gmodule.
2009-07-28 01:02:02 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
if BUILD_COGL_PATH
SUBDIRS += cogl-path
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 12:22:22 +00:00
endif
VS 2008/2010 project files to build Cogl These are the VS 2008/2010 project files to build Cogl, with a README.txt to explain the process involved. Note that the Cogl and Cogl-Pango projects (and filters for VS2010) are expanded with the correct source file listings during "make dist", which is done to simplify maintenance of these project files. -added preconfigured config.h(.win32.in), which is expanded with the correct versioining info during autogen -added preconfigued cogl/cogl-defines.h.win32 -added symbols files for cogl and cogl-pango -Have configure.ac expand the config.h.win32.in into config.h.win32 with the correct versioning info, etc, and to include the Visual C++ project files for distribution -Added rules in cogl/Makefile.am to expand the cogl VS 2008/2010 projects and filters from the templates with up-to-date source file listings, to distribute cogl-enum-types.c, cogl-enum-types.h to ease compilation and to avoid depending on PERL on Windows installations. -Added rules in cogl-pango/Makefile.am to expand the cogl-pango VS2008/ 2010 projects and filters from the templates with up-to-date source file listings. -Added/edited various Makefile.am's in build to distribute the VS2008/2010 project files and associated items required for the build. -Update .gitignore. There needs to be a pre-configured config.h(.win32) and its template, config.h.win32.in for Visual C++ builds https://bugzilla.gnome.org/show_bug.cgi?id=650020 Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-05-12 09:06:32 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
if BUILD_COGL_PANGO
SUBDIRS += cogl-pango
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 12:22:22 +00:00
endif
Registers gtypes for all public objects and structs This adds much more comprehensive support for gobject-introspection based bindings by registering all objects as fundamental types that inherit from CoglObject, and all structs as boxed types. Co-Author: Robert Bragg <robert@linux.intel.com> Reviewed-by: Neil Roberts <neil@linux.intel.com>
2013-09-02 15:02:42 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
if BUILD_COGL_GLES2
SUBDIRS += cogl-gles2
Registers gtypes for all public objects and structs This adds much more comprehensive support for gobject-introspection based bindings by registering all objects as fundamental types that inherit from CoglObject, and all structs as boxed types. Co-Author: Robert Bragg <robert@linux.intel.com> Reviewed-by: Neil Roberts <neil@linux.intel.com>
2013-09-02 15:02:42 +00:00
endif
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-10 02:32:11 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
SUBDIRS += tests
Registers gtypes for all public objects and structs This adds much more comprehensive support for gobject-introspection based bindings by registering all objects as fundamental types that inherit from CoglObject, and all structs as boxed types. Co-Author: Robert Bragg <robert@linux.intel.com> Reviewed-by: Neil Roberts <neil@linux.intel.com>
2013-09-02 15:02:42 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
ACLOCAL_AMFLAGS = -I build/autotools ${ACLOCAL_FLAGS}
Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys As part of an incremental process to have Cogl be a standalone project we want to re-consider how we organise the Cogl source code. Currently this is the structure I'm aiming for: cogl/ cogl/ <put common source here> winsys/ cogl-glx.c cogl-wgl.c driver/ gl/ gles/ os/ ? utils/ cogl-fixed cogl-matrix-stack? cogl-journal? cogl-primitives? pango/ The new winsys component is a starting point for migrating window system code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl. The utils/ and pango/ directories aren't added by this commit, but they are noted because I plan to add them soon. Overview of the planned structure: * The winsys/ API is the API that binds OpenGL to a specific window system, be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic under clutter/{glx,osx,win32 etc} should migrate here. * Note there is also the idea of a winsys-base that may represent a window system for which there are multiple winsys APIs. An example of this is x11, since glx and egl may both be used with x11. (currently only Clutter has the idea of a winsys-base) * The driver/ represents a specific varient of OpenGL. Currently we have "gl" representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing GLES 1.1 (fixed funciton) and 2.0 (fully shader based) * Everything under cogl/ should fundamentally be supporting access to the GPU. Essentially Cogl's most basic requirement is to provide a nice GPU Graphics API and drawing a line between this and the utility functionality we add to support Clutter should help keep this lean and maintainable. * Code under utils/ as suggested builds on cogl/ adding more convenient APIs or mechanism to optimize special cases. Broadly speaking you can compare cogl/ to OpenGL and utils/ to GLU. * clutter/pango will be moved to clutter/cogl/pango How some of the internal configure.ac/pkg-config terminology has changed: backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11" backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la" clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx" CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS clutterbackendlib -> CLUTTER_WINSYS_LIB CLUTTER_COGL -> COGL_DRIVER # e.g. "gl" Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps As the first thing to take advantage of the new winsys component in Cogl; cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into cogl/common/cogl.c and this common implementation first trys _cogl_winsys_get_proc_address() but if that fails then it falls back to gmodule.
2009-07-28 01:02:02 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
EXTRA_DIST = \
config-custom.h
Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys As part of an incremental process to have Cogl be a standalone project we want to re-consider how we organise the Cogl source code. Currently this is the structure I'm aiming for: cogl/ cogl/ <put common source here> winsys/ cogl-glx.c cogl-wgl.c driver/ gl/ gles/ os/ ? utils/ cogl-fixed cogl-matrix-stack? cogl-journal? cogl-primitives? pango/ The new winsys component is a starting point for migrating window system code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl. The utils/ and pango/ directories aren't added by this commit, but they are noted because I plan to add them soon. Overview of the planned structure: * The winsys/ API is the API that binds OpenGL to a specific window system, be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic under clutter/{glx,osx,win32 etc} should migrate here. * Note there is also the idea of a winsys-base that may represent a window system for which there are multiple winsys APIs. An example of this is x11, since glx and egl may both be used with x11. (currently only Clutter has the idea of a winsys-base) * The driver/ represents a specific varient of OpenGL. Currently we have "gl" representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing GLES 1.1 (fixed funciton) and 2.0 (fully shader based) * Everything under cogl/ should fundamentally be supporting access to the GPU. Essentially Cogl's most basic requirement is to provide a nice GPU Graphics API and drawing a line between this and the utility functionality we add to support Clutter should help keep this lean and maintainable. * Code under utils/ as suggested builds on cogl/ adding more convenient APIs or mechanism to optimize special cases. Broadly speaking you can compare cogl/ to OpenGL and utils/ to GLU. * clutter/pango will be moved to clutter/cogl/pango How some of the internal configure.ac/pkg-config terminology has changed: backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11" backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la" clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx" CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS clutterbackendlib -> CLUTTER_WINSYS_LIB CLUTTER_COGL -> COGL_DRIVER # e.g. "gl" Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps As the first thing to take advantage of the new winsys component in Cogl; cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into cogl/common/cogl.c and this common implementation first trys _cogl_winsys_get_proc_address() but if that fails then it falls back to gmodule.
2009-07-28 01:02:02 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
# .changelog expects these to be initializes
CLEANFILES=
DISTCLEANFILES=
build: Compile the introspection data The compilation step for the introspection data was missing.
2011-05-06 15:53:43 +00:00
move everything into a cogl/ directory
2016-04-22 14:44:31 +00:00
DISTCHECK_CONFIGURE_FLAGS = \
--enable-maintainer-flags \
--enable-profile \
--enable-gles2 \
--enable-gl \
--enable-xlib-egl-platform \
--enable-wayland-egl-platform \
--enable-glx \
--enable-wayland-egl-server \
--enable-cogl-gst
Copy permalink