1
0
Fork 0
mutter-performance-source/src/backends/native/meta-crtc-kms.c

387 lines
12 KiB
C
Raw Normal View History

/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */
/*
* Copyright (C) 2013-2017 Red Hat
* Copyright (C) 2018 DisplayLink (UK) Ltd.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*/
#include "config.h"
#include "backends/native/meta-crtc-kms.h"
#include "backends/meta-backend-private.h"
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
#include "backends/meta-logical-monitor.h"
#include "backends/native/meta-crtc-mode-kms.h"
#include "backends/native/meta-gpu-kms.h"
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
#include "backends/native/meta-output-kms.h"
#include "backends/native/meta-kms-device.h"
#include "backends/native/meta-kms-mode.h"
#include "backends/native/meta-kms-plane.h"
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
#include "backends/native/meta-kms-update.h"
#include "backends/native/meta-kms.h"
#include "backends/native/meta-monitor-manager-native.h"
#define ALL_TRANSFORMS_MASK ((1 << META_MONITOR_N_TRANSFORMS) - 1)
struct _MetaCrtcKms
{
MetaCrtcNative parent;
MetaKmsCrtc *kms_crtc;
MetaKmsPlane *primary_plane;
gpointer cursor_renderer_private;
GDestroyNotify cursor_renderer_private_destroy_notify;
gboolean is_gamma_valid;
};
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
static GQuark kms_crtc_crtc_kms_quark;
G_DEFINE_TYPE (MetaCrtcKms, meta_crtc_kms, META_TYPE_CRTC_NATIVE)
gpointer
meta_crtc_kms_get_cursor_renderer_private (MetaCrtcKms *crtc_kms)
{
return crtc_kms->cursor_renderer_private;
}
void
meta_crtc_kms_set_cursor_renderer_private (MetaCrtcKms *crtc_kms,
gpointer cursor_renderer_private,
GDestroyNotify destroy_notify)
{
g_clear_pointer (&crtc_kms->cursor_renderer_private,
crtc_kms->cursor_renderer_private_destroy_notify);
crtc_kms->cursor_renderer_private = cursor_renderer_private;
crtc_kms->cursor_renderer_private_destroy_notify = destroy_notify;
}
static gboolean
is_transform_handled (MetaCrtcKms *crtc_kms,
MetaMonitorTransform transform)
{
if (!crtc_kms->primary_plane)
return FALSE;
return meta_kms_plane_is_transform_handled (crtc_kms->primary_plane,
transform);
}
static gboolean
meta_crtc_kms_is_transform_handled (MetaCrtcNative *crtc_native,
MetaMonitorTransform transform)
{
MetaCrtcKms *crtc_kms = META_CRTC_KMS (crtc_native);
return is_transform_handled (crtc_kms, transform);
}
void
meta_crtc_kms_apply_transform (MetaCrtcKms *crtc_kms,
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaKmsPlaneAssignment *kms_plane_assignment)
{
MetaCrtc *crtc = META_CRTC (crtc_kms);
const MetaCrtcConfig *crtc_config;
MetaMonitorTransform hw_transform;
crtc_config = meta_crtc_get_config (crtc);
hw_transform = crtc_config->transform;
if (!is_transform_handled (crtc_kms, hw_transform))
hw_transform = META_MONITOR_TRANSFORM_NORMAL;
if (!is_transform_handled (crtc_kms, hw_transform))
return;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
meta_kms_plane_update_set_rotation (crtc_kms->primary_plane,
kms_plane_assignment,
hw_transform);
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
void
meta_crtc_kms_assign_primary_plane (MetaCrtcKms *crtc_kms,
MetaDrmBuffer *buffer,
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaKmsUpdate *kms_update)
{
MetaCrtc *crtc = META_CRTC (crtc_kms);
const MetaCrtcConfig *crtc_config;
const MetaCrtcModeInfo *crtc_mode_info;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaFixed16Rectangle src_rect;
MetaRectangle dst_rect;
MetaKmsAssignPlaneFlag flags;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaKmsCrtc *kms_crtc;
MetaKmsDevice *kms_device;
MetaKmsPlane *primary_kms_plane;
MetaKmsPlaneAssignment *plane_assignment;
crtc_config = meta_crtc_get_config (crtc);
crtc_mode_info = meta_crtc_mode_get_info (crtc_config->mode);
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
src_rect = (MetaFixed16Rectangle) {
.x = meta_fixed_16_from_int (0),
.y = meta_fixed_16_from_int (0),
.width = meta_fixed_16_from_int (crtc_mode_info->width),
.height = meta_fixed_16_from_int (crtc_mode_info->height),
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
};
dst_rect = (MetaRectangle) {
.x = 0,
.y = 0,
.width = crtc_mode_info->width,
.height = crtc_mode_info->height,
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
};
flags = META_KMS_ASSIGN_PLANE_FLAG_NONE;
kms_crtc = meta_crtc_kms_get_kms_crtc (crtc_kms);
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
kms_device = meta_kms_crtc_get_device (kms_crtc);
primary_kms_plane = meta_kms_device_get_primary_plane_for (kms_device,
kms_crtc);
plane_assignment = meta_kms_update_assign_plane (kms_update,
kms_crtc,
primary_kms_plane,
buffer,
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
src_rect,
dst_rect,
flags);
meta_crtc_kms_apply_transform (crtc_kms, plane_assignment);
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
static GList *
generate_crtc_connector_list (MetaGpu *gpu,
MetaCrtc *crtc)
{
GList *connectors = NULL;
GList *l;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
for (l = meta_gpu_get_outputs (gpu); l; l = l->next)
{
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaOutput *output = l->data;
MetaCrtc *assigned_crtc;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
assigned_crtc = meta_output_get_assigned_crtc (output);
if (assigned_crtc == crtc)
{
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaKmsConnector *kms_connector =
meta_output_kms_get_kms_connector (META_OUTPUT_KMS (output));
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
connectors = g_list_prepend (connectors, kms_connector);
}
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
return connectors;
}
void
meta_crtc_kms_maybe_set_gamma (MetaCrtcKms *crtc_kms,
MetaKmsDevice *kms_device)
{
MetaGpu *gpu = meta_crtc_get_gpu (META_CRTC (crtc_kms));
MetaBackend *backend = meta_gpu_get_backend (gpu);
MetaMonitorManager *monitor_manager =
meta_backend_get_monitor_manager (backend);
MetaMonitorManagerNative *monitor_manager_native =
META_MONITOR_MANAGER_NATIVE (monitor_manager);
MetaKms *kms = meta_kms_device_get_kms (kms_device);
MetaKmsUpdate *kms_update;
MetaKmsCrtcGamma *gamma;
if (crtc_kms->is_gamma_valid)
return;
gamma = meta_monitor_manager_native_get_cached_crtc_gamma (monitor_manager_native,
crtc_kms);
if (!gamma)
return;
kms_update = meta_kms_ensure_pending_update (kms, kms_device);
meta_kms_update_set_crtc_gamma (kms_update,
meta_crtc_kms_get_kms_crtc (crtc_kms),
gamma->size,
gamma->red,
gamma->green,
gamma->blue);
crtc_kms->is_gamma_valid = TRUE;
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
void
meta_crtc_kms_set_mode (MetaCrtcKms *crtc_kms,
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaKmsUpdate *kms_update)
{
MetaCrtc *crtc = META_CRTC (crtc_kms);
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
MetaGpu *gpu = meta_crtc_get_gpu (crtc);
GList *connectors;
MetaKmsMode *kms_mode;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
connectors = generate_crtc_connector_list (gpu, crtc);
if (connectors)
{
const MetaCrtcConfig *crtc_config = meta_crtc_get_config (crtc);
MetaCrtcModeKms *crtc_mode_kms = META_CRTC_MODE_KMS (crtc_config->mode);
kms_mode = meta_crtc_mode_kms_get_kms_mode (crtc_mode_kms);
meta_topic (META_DEBUG_KMS,
"Setting CRTC (%" G_GUINT64_FORMAT ") mode to %s",
meta_crtc_get_id (crtc), meta_kms_mode_get_name (kms_mode));
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
else
{
kms_mode = NULL;
meta_topic (META_DEBUG_KMS,
"Unsetting CRTC (%" G_GUINT64_FORMAT ") mode",
meta_crtc_get_id (crtc));
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
meta_kms_update_mode_set (kms_update,
meta_crtc_kms_get_kms_crtc (crtc_kms),
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
g_steal_pointer (&connectors),
kms_mode);
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
}
MetaKmsCrtc *
meta_crtc_kms_get_kms_crtc (MetaCrtcKms *crtc_kms)
{
return crtc_kms->kms_crtc;
}
/**
* meta_crtc_kms_get_modifiers:
* @crtc_kms: a #MetaCrtc object that has to be a #MetaCrtcKms
* @format: a DRM pixel format
*
* Returns a pointer to a #GArray containing all the supported
* modifiers for the given DRM pixel format on the CRTC's primary
* plane. The array element type is uint64_t.
*
* The caller must not modify or destroy the array or its contents.
*
* Returns NULL if the modifiers are not known or the format is not
* supported.
*/
GArray *
meta_crtc_kms_get_modifiers (MetaCrtcKms *crtc_kms,
uint32_t format)
{
return meta_kms_plane_get_modifiers_for_format (crtc_kms->primary_plane,
format);
}
/**
* meta_crtc_kms_copy_drm_format_list:
* @crtc_kms: a #MetaCrtc object that has to be a #MetaCrtcKms
*
* Returns a new #GArray that the caller must destroy. The array
* contains all the DRM pixel formats the CRTC supports on
* its primary plane. The array element type is uint32_t.
*/
GArray *
meta_crtc_kms_copy_drm_format_list (MetaCrtcKms *crtc_kms)
{
return meta_kms_plane_copy_drm_format_list (crtc_kms->primary_plane);
}
/**
* meta_crtc_kms_supports_format:
* @crtc_kms: a #MetaCrtcKms
* @drm_format: a DRM pixel format
*
* Returns true if the CRTC supports the format on its primary plane.
*/
gboolean
meta_crtc_kms_supports_format (MetaCrtcKms *crtc_kms,
uint32_t drm_format)
{
return meta_kms_plane_is_format_supported (crtc_kms->primary_plane,
drm_format);
}
void
meta_crtc_kms_invalidate_gamma (MetaCrtcKms *crtc_kms)
{
crtc_kms->is_gamma_valid = FALSE;
}
MetaCrtcKms *
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
meta_crtc_kms_from_kms_crtc (MetaKmsCrtc *kms_crtc)
{
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
return g_object_get_qdata (G_OBJECT (kms_crtc), kms_crtc_crtc_kms_quark);
}
MetaCrtcKms *
meta_crtc_kms_new (MetaGpuKms *gpu_kms,
MetaKmsCrtc *kms_crtc)
{
MetaGpu *gpu = META_GPU (gpu_kms);
MetaKmsDevice *kms_device;
MetaCrtcKms *crtc_kms;
MetaKmsPlane *primary_plane;
kms_device = meta_gpu_kms_get_kms_device (gpu_kms);
primary_plane = meta_kms_device_get_primary_plane_for (kms_device,
kms_crtc);
crtc_kms = g_object_new (META_TYPE_CRTC_KMS,
"id", (uint64_t) meta_kms_crtc_get_id (kms_crtc),
"gpu", gpu,
NULL);
crtc_kms->kms_crtc = kms_crtc;
crtc_kms->primary_plane = primary_plane;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 20:36:41 +00:00
if (!kms_crtc_crtc_kms_quark)
{
kms_crtc_crtc_kms_quark =
g_quark_from_static_string ("meta-kms-crtc-crtc-kms-quark");
}
g_object_set_qdata (G_OBJECT (kms_crtc), kms_crtc_crtc_kms_quark, crtc_kms);
return crtc_kms;
}
static void
meta_crtc_kms_dispose (GObject *object)
{
MetaCrtcKms *crtc_kms = META_CRTC_KMS (object);
g_clear_pointer (&crtc_kms->cursor_renderer_private,
crtc_kms->cursor_renderer_private_destroy_notify);
G_OBJECT_CLASS (meta_crtc_kms_parent_class)->dispose (object);
}
static void
meta_crtc_kms_init (MetaCrtcKms *crtc_kms)
{
}
static void
meta_crtc_kms_class_init (MetaCrtcKmsClass *klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
MetaCrtcNativeClass *crtc_native_class = META_CRTC_NATIVE_CLASS (klass);
object_class->dispose = meta_crtc_kms_dispose;
crtc_native_class->is_transform_handled = meta_crtc_kms_is_transform_handled;
}