mutter-performance-source/data/dbus-interfaces/org.gnome.Mutter.ScreenCast.xml

<!DOCTYPE node PUBLIC
'-//freedesktop//DTD D-BUS Object Introspection 1.0//EN'
'http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd'>
<node>

  <!--
      org.gnome.Mutter.ScreenCast:
      @short_description: Screen cast interface

      This API is private and not intended to be used outside of the integrated
      system that uses libmutter. No compatibility between versions are
      promised.
  -->
  <interface name="org.gnome.Mutter.ScreenCast">

    <!--
        CreateSession:
        @properties: Properties
        @session_path: Path to the new session object

        * "remote-desktop-session-id" (s): The ID of a remote desktop session.
                                           Remote desktop driven screen casts
                                           are started and stopped by the remote
                                           desktop session.
        * "disable-animations" (b): Set to "true" if the screen cast application
                                    would prefer animations to be globally
                                    disabled, while the session is running.
                                    Default is "false".
                                    Available since version 3.
    -->
    <method name="CreateSession">
      <arg name="properties" type="a{sv}" direction="in" />
      <arg name="session_path" type="o" direction="out" />
    </method>

    <!--
        Version:
        @short_description: API version
    -->
    <property name="Version" type="i" access="read" />

  </interface>

  <!--
       org.gnome.Mutter.ScreenCast.Session:
       @short_description: Screen cast session
  -->
  <interface name="org.gnome.Mutter.ScreenCast.Session">

    <!--
        Start:

        Start the screen cast session
    -->
    <method name="Start" />

    <!--
        Stop:

        Stop the screen cast session
    -->
    <method name="Stop" />

    <!--
        Closed:

        The session has closed.
    -->
    <signal name="Closed" />

    <!--
        RecordMonitor:
        @connector: Connector of the monitor to record
        @properties: Properties
        @stream_path: Path to the new stream object

        Record a single monitor.

        Available @properties include:

        * "cursor-mode" (u): Cursor mode. Default: 'hidden' (see below)
                             Available since API version 2.
        * "is-recording" (b): Whether this is a screen recording. May be
                              be used for choosing appropriate visual feedback.
                              Default: false. Available since API version 4.

        Available cursor mode values:

        0: hidden - cursor is not included in the stream
        1: embedded - cursor is included in the framebuffer
        2: metadata - cursor is included as metadata in the PipeWire stream
    -->
    <method name="RecordMonitor">
      <arg name="connector" type="s" direction="in" />
      <arg name="properties" type="a{sv}" direction="in" />
      <arg name="stream_path" type="o" direction="out" />
    </method>

    <!--
        RecordWindow:
        @properties: Properties used determining what window to select
        @stream_path: Path to the new stream object

        Supported since API version 2.

        Record a single window. The cursor will not be included.

        Available @properties include:

        * "window-id" (t): Id of the window to record.
        * "cursor-mode" (u): Cursor mode. Default: 'hidden' (see RecordMonitor).
        * "is-recording" (b): Whether this is a screen recording. May be
                              be used for choosing panel icon.
                              Default: false. Available since API version 4.

    -->
    <method name="RecordWindow">
      <arg name="properties" type="a{sv}" direction="in" />
      <arg name="stream_path" type="o" direction="out" />
    </method>

    <!--
        RecordArea:
        @x: X position of the recorded area
        @y: Y position of the recorded area
        @width: width of the recorded area
        @height: height of the recorded area
        @properties: Properties
        @stream_path: Path to the new stream object

        Record an area of the stage. The coordinates are in stage coordinates.
        The size of the stream does not necessarily match the size of the
        recorded area, and will depend on DPI scale of the affected monitors.

        Available @properties include:

        * "cursor-mode" (u): Cursor mode. Default: 'hidden' (see below)
                             Available since API version 2.
        * "is-recording" (b): Whether this is a screen recording. May be
                              be used for choosing panel icon.
                              Default: false. Available since API version 4.

        Available cursor mode values:

        0: hidden - cursor is not included in the stream
        1: embedded - cursor is included in the framebuffer
        2: metadata - cursor is included as metadata in the PipeWire stream
    -->
    <method name="RecordArea">
      <arg name="x" type="i" direction="in" />
      <arg name="y" type="i" direction="in" />
      <arg name="width" type="i" direction="in" />
      <arg name="height" type="i" direction="in" />
      <arg name="properties" type="a{sv}" direction="in" />
      <arg name="stream_path" type="o" direction="out" />
    </method>

    <!--
        RecordVirtual:
        @properties: Properties
        @stream_path: Path to the new stream object

        Record a virtual area that will be represented as a virtual monitor. The
        width and height corresponds to the non-scaled intended stream size.

        Available @properties include:

        * "cursor-mode" (u): Cursor mode. Default: 'hidden' (see below)
                             Available since API version 2.
        * "is-platform" (b): Whether this virtual output should be considered
                             part of the platform, meaning it will not be
                             interpreted as if the screen is shared, but more
                             transparently as if it was a real monitor.
                             Available since API version 3. Default: FALSE.

        Available cursor mode values:

        0: hidden - cursor is not included in the stream
        1: embedded - cursor is included in the framebuffer
        2: metadata - cursor is included as metadata in the PipeWire stream
    -->
    <method name="RecordVirtual">
      <arg name="properties" type="a{sv}" direction="in" />
      <arg name="stream_path" type="o" direction="out" />
    </method>
  </interface>

  <!--
       org.gnome.Mutter.ScreenCast.Stream:
       @short_description: Screen cast stream
  -->
  <interface name="org.gnome.Mutter.ScreenCast.Stream">

    <!--
        Start:
        @short_description: Start new stream

        Start a stream of an already started session.
    -->
    <method name="Start"/>

    <!--
        Stop:
        @short_description: Stop the stream

        Stop the started stream.
    -->
    <method name="Stop"/>

    <!--
        PipeWireStreamAdded:
        @short_description: Pipewire stream added

        A signal emitted when PipeWire stream for the screen cast stream has
        been created. The @node_id corresponds to the PipeWire stream node.
    -->
    <signal name="PipeWireStreamAdded">
      <annotation name="org.gtk.GDBus.C.Name" value="pipewire-stream-added"/>
      <arg name="node_id" type="u" direction="out" />
    </signal>

    <!--
        Parameters:
        @short_description: Optional stream parameters

        Available parameters include:

        * "position" (ii): Position of the source of the stream in the
                           compositor coordinate space.
        * "size" (ii): Size of the source of the stream in the compositor
                       coordinate space.
        * "output-name" s: Xrandr name of the output in case of X11 and
                           wl_output.name in case of Wayland. Available only
                           for monitor streams.
    -->
    <property name="Parameters" type="a{sv}" access="read" />

  </interface>

</node>