As we only had one string-array preference so far, we didn't bother
with adding a generic way to handle string-array preferences, and
just handled the preference in question explicitly. However we are
going to parse another string-array setting, so generalize the
existing code to make it reusable for that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700223
This essentially just moves install_corners() from the compositor, through
the core, into the UI layer where it arguably should have been anyway,
leaving behind stub functions which call through the various layers. This
removes the compositor's special knowledge of how rounded corners work,
replacing it with "ask the UI for an alpha mask".
The computation of border widths and heights changes a bit, because the
width and height used in install_corners() are the
meta_window_get_outer_rect() (which includes the visible borders but not
the invisible ones), whereas the more readily-available rectangle is the
MetaFrame.rect (which includes both). Computing the same width and height
as meta_window_get_outer_rect() involves compensating for the invisible
borders, but the UI layer is the authority on those anyway, so it seems
clearer to have it do the calculations from scratch.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=697758
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
XUngrabKey() doesn't work for XI2 grabs and XI2 doesn't provide API
with similar functionality. As such, we have to refactor the code a
bit to be able to call XIUngrabKeycode() for each key binding, then
reload keybindings and finally grab the new ones.
https://bugzilla.gnome.org/show_bug.cgi?id=697003
In 97a4cc8c, we accidentally lost the check that kept us from
sending multiple configures to a window before it responds to
_NET_WM_SYNC_REQUEST. So _NET_WM_SYNC_REQUEST stopped working
properly. Add a check back with the same effect.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
During a resize, if we don't have a configure pending, then a counter
change shouldn't trigger anything other than the normal drawing:
it's just a spontaneous frame from the application. So don't try
to update the position or remove our timeout ID.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
Trying to track the fullscreen status outside of Mutter, as GNOME Shell
was doing previously, was very prone to errors, because Mutter has a
very tricky definition of when a window is set to be fullscreen and
*actually* acting like a fullscreen window.
* Add meta_screen_get_monitor_in_fullscreen() and an
::in-fullscreen-changed signal. This allows an application to
track when there are fullscreen windows on a monitor.
* Do the computation of fullscreen status in a "later" function that
runs after showing, so we properly take focus into account.
* To get ordering of different phases right, add more values
to MetaLaterType.
* Add auto-minimization, similar to what was added to GNOME Shell
earlier in this cycle - if a window is set to be fullscreen, but
not actually fullscreen, minimize.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Since the tile mode is now always reset on maximize(), this code
no longer does anything (not to mention that side-by-side tiled
windows haven't snapped back for a while now).
https://bugzilla.gnome.org/show_bug.cgi?id=682779
We used to restore side-by-side tiling when unmaximizing, so we
kept the tile-mode during maximization. Since commit 10d53fc7d
there's no longer a good reason to do so, and it can result in
tile previews being shown erroneously on window drag operations
without motion (double-click on titlebar), so reset the tile
mode in maximize().
https://bugzilla.gnome.org/show_bug.cgi?id=682779
The tile preview is expected to be shown underneath the focus window.
However the code that restacks the preview broke when override-redirect
windows were moved to a separate window group.
To fix, special-case tile previews to put them in the NORMAL layer.
https://bugzilla.gnome.org/show_bug.cgi?id=696053
Previously, we were handling failure to respond to _NET_WM_SYNC_REQUEST
in the code path for throttling motion events. But this meant that
if a window didn't respond to _NET_WM_SYNC_REQUEST and there were no
motion events - for a keyboard resize, or after the end of the grab
operation - it would end up in a stuck state.
Use a separate per-window timeout to reliably catch the failure to respond
to _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
During resizing we froze window updates when configuring the
window, and unfroze the window updates when processing the
next resize. This wasn't absolutely reliable, because we might
not have a next resize. Instead tie window freezing more
directly to the current sync request value - a window is
frozen until it catches up with the last value we sent it
in _NET_WM_SYNC_REQUEST.
Testing with unresponsive clients showed that there was a bug
where window->disable_sync once set, would not actually disable
sync, but it *would* disable noticing that the client was
unresponsive for the next resize. Fix that by checking for
->disable_sync before sending _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
Send a _NET_WM_FRAME_DRAWN for each newly created window, as required
by the specification. This avoids a race where a window might be created
frozen but already unfrozen by the time we first see fetch the
counter value.
Remove a duplicate call to meta_compositor_set_updates_frozen() which
was called before the MetaWindowActor is created and hence did nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=694771
mutter currently only filters the overlay key through the shell
when there is a grab operation and that grab operation belongs to the
shell (because the shell is pushModal'd). This means the shell can't
filter out overlay key press events events at startup (since the shell
isn't normally modal).
This commit changes the code to always run the shell filtering code,
even when the shell is not modal.
https://bugzilla.gnome.org/show_bug.cgi?id=694837
gnome-shell shouldn't announce to the session manager it's
"ready" until it's fully initialized. It currently tells
the session manager it's ready as soon as it hits the main
loop. This causes nautilus in classic mode to start before
we have workspaces initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=694876
During compositor grabs, all global keybindings that don't go
through mutter's keybinding system are blocked. To allow other
processes to make use of it, gnome-shell will expose a simple
grab API on DBus; for this, add API to grab key combos directly
instead of parsing accelerators stored in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=643111
meta_screen_get_monitor_for_rect will return the monitor that
a given rect belongs in (choosing the "best" monitor based on
overlap, if there are overlapping monitors).
It doesn't work with 0x0 rects, though.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=694725
meta_window_is_remote compares a cached copy of the system hostname
with the hostname of the client window
(as presented by the WM_CLIENT_MACHINE property).
Of course, the system hostname can change at any time, so caching
it is wrong. Also, the WM_CLIENT_MACHINE property won't necessarily
change when the system hostname changes, so comparing it with the
new system hostname is wrong, too.
This commit makes the code call gethostname() at the time
WM_CLIENT_MACHINE is set, check whether it's remote then, and cache
that value, rather than comparing potentially out of sync hostnames
later.
https://bugzilla.gnome.org/show_bug.cgi?id=688716
Window menus use the first key combination for a binding to show the
acceleration, so the list must be in the right configured order, which
is the opposite of what's built by g_slist_prepend()
https://bugzilla.gnome.org/show_bug.cgi?id=694045
The guard window is effectively the background window, as it sits
in between live windows and minimized windows. This gives us a nice
easy place to allow users to allow users to right-click or long-press
on the wallpaper.
https://bugzilla.gnome.org/show_bug.cgi?id=681540
We do, in fact, need freezing to affect window geometry, so that
move-resize operations (such as an interactive resize from the
left, or a resize of a popup centered by the application) occur
atomically.
So to make map effects work properly, only exclude the initial
placement of a window from freezing. (In the future, we may want
to consider whether pure moves of a window being done in response
to a user drag should also be excluded from freezing.)
Rename meta_window_sync_actor_position() to
meta_window_sync_actor_geometry() for clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=693922
The WM spec requires _NET_WM_FRAME_DRAWN to *always* be sent when
there is an appropriate update to the sync counter value. We were
potentially missing _NET_WM_FRAME_DRAWN when an application did a
spontaneous update during an interactive resize and during effects.
Refactor the code to always send _NET_WM_FRAME_DRAWN, even when
a window is frozen.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
During resizing, An odd counter value (indicating the beginning of a frame)
shouldn't cause us to redraw and start a new frame, only an even counter
value. This was causing the frozen state for the window frame counter to
overlap the frozen state for the resize, causing the window not to be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
In different places we checked the grab op differently when determing
whether we are using _NET_WM_SYNC_REQUEST. This was somewhat covered
up previously by the fact that we only had a sync alarm when using
_NET_WM_SYNC_REQUEST, but that is no longer the case, so consistently
use meta_grab_op_is_resizing() everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When a client is drawing as hard as possible (without sleeping
between frames) we need to draw as soon possible, since sleeping
will decrease the effective frame rate shown to the user, and
can also result in the system never kicking out of power-saving
mode because it doesn't look fully utilized.
Use the amount the client increments the counter value by when
ending the frame to distinguish these cases:
- Increment by 1: a no-delay frame
- Increment by more than 1: a non-urgent frame, handle normally
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Use XSyncSetPriority() to prioritize the compositor above applications
for X server priority. In practice, this makes little difference because
the Xorg "smart scheduler" will schedule in a single application for
time slices that exceed the frame drawing time, but it's theoretically
right and might make a difference if the X server scheduler is improved.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Resizing the frame triggers creation of a new backing pixmap for the
window, so we should do that first before we resize the client window
and mess up the contents of the old backing pixmap.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When the application provides the extended second counter for
_NET_WM_SYNC_REQUEST, send a client message with completion
information after the next redraw after each counter update
by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
If an application provides two values in _NET_WM_SYNC_REQUEST_COUNTER,
use that as a signal that the applications wants an extended behavior
where it can update the counter as well as the window manager. If the
application updates the counter to an odd value, updates of the
window are frozen until the counter is updated again to an even value.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of creating a new alarm each time we resize a window
interactively, create an alarm the first time we resize a window
and keep it around permanently until we unmanage the window.
Doing it this way will be useful when we allow the application to
spontaneously generate sync request updates to indicate
frames it is drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Replace the unused meta_compositor_set_updates() with
a reversed-meaning meta_compositor_set_updates_frozen(), and use
it to implement freezing application window updates during
interactive resizing. This avoids drawing new areas of the window
with blank content before the application has a chance to repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
meta_screen_resize calls meta_window_update_for_monitors_changed for all
windows including OR windows when the monitors change (or screen size).
This calls meta_window_move_between_rects for the window which attempts to
move the OR window by calling meta_window_move_resize.
meta_window_move_resize refuses to do anything on OR windows (just returns
for OR windows).
This causes a storm of assert messages when the screen
resolution changes while an OR window is visible.
(like the one gnome-control-center displays with the monitor name).
Fix that by not calling meta_window_update_for_monitors_changed for OR windows
and let the applications handle them by themselves.
https://bugzilla.gnome.org/show_bug.cgi?id=693540
As the hash table no longer stores only window IDs, we should rename it so
that we make sure to check if something is actually a window before using it
as a window.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
XInput 2.3 adds support for "barrier events", which let us know when
a pointer barrier has been hit, and when the pointer has stopped
hitting the barrier, and lets us "release" the barrier, temporarily
letting the pointer pass through the barrier. These features can be
combined to allow for certain pointer gestures, such as "pushing"
against the bottom of the screen, or stopping the pointer on monitor
edges while dragging slowly for increased edge precision.
This commit should allow graceful fallback if servers with
XInput 2.3 aren't supported.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Currently, we have a few function wrappers in the shell for pointer
barriers. If we want to implement interactive features on barriers,
we need some sort of signal to be notified of the interactivity.
In that case, we need to make a more sophisticated object-based wrapper
for a pointer barrier. Add one, and stick it in mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Some windows may already have event masks on them that we've selected
for, especially if we're using GTK+ windows. In particular, this fixes
window menus in the XI2 port.
https://bugzilla.gnome.org/show_bug.cgi?id=690581
This new hint allows compositors to know what portions of a window
will be obscured, as a region above them is opaque. For an RGB window,
possible to glean this information from the bounding shape region of
a client window, but not for an ARGB32 window. This new hint allows
clients that use ARGB32 windows to say which part of the window is
opaque, allowing this sort of optimization.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
We want to put barrier wrappers in mutter, which requre XFixes 5.0.
XFixes 5.0 was released in March, 2011, which should be old enough
to mandate support for.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Using a public method for setting the (cached) icon geometry rather
than accessing the struct members directly allows setting the icon
geometry from extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=692997
We have some code in gnome-shell that does the equivalent of:
window.get_workspace() == workspace || window.is_on_all_workspaces();
which is a bit unwieldy. We already have a method in mutter,
so use that and document it.
https://bugzilla.gnome.org/show_bug.cgi?id=691744
MetaButtonLayout is extremely unfriendly for introspection: its fields
are arrays of a fixed length, but the actual length is determined by
a custom stop value (e.g. not NULL / 0).
Without API changes this will never work nicely in introspection, but
we can at least make it work; start by filling up unused fields with
the stop value rather than leaving it at random values.
https://bugzilla.gnome.org/show_bug.cgi?id=689263
Currently, we ping windows only when attempting to delete them, but
if the application is not responding, we want to show the dialog
as soon as possible. Given that we cannot be passively notified that
the window stopped responding with the current X11 protocol, a good
workaround is to ping the window when activating it.
If the window stops responding while active, it is expected the user
will try to switch window or open the overview, and when coming back
he'll get the failure dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
Add meta_window_check_alive(), which is a simple wrapper over
meta_display_ping_window(), and takes care of showing the "Application
is not responding dialog" if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
We want to maintain the invariant that an attached modal dialog is always
of type MODAL_DIALOG, so recompute is_attached_dialog() when the window
type changes.
https://bugzilla.gnome.org/show_bug.cgi?id=690454
In random places that are not grabs, we selected for events on
things like the root window, stage window, COW and more. Switch
these over to using the proper XI2 APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
As calling XIGrabDevice multiple times will change it, just
drop the XChangeActivePointerGrab path and just go down the
XIGrabPointer path always.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
It's unlikely that we'll ever want to support multiple pointer
devices. Multiple keyboard devices may become useful in the future,
but for now, only care about the core keyboard.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Mechanically transform the event processing of mutter to care
about XI2 events instead of Core Events. Core Events will be left
in the dust soon, and removed entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
This removes some duplicate event type checks, and will make
the code cleaner in the future when we want to make the grab_op_event
handler take an XIDeviceEvent directly.
Based on a patch by Owen Taylor <otaylor@fishsoup.net>
https://bugzilla.gnome.org/show_bug.cgi?id=688779
In order to make the XI2 handling easier on us in the future, we now
split input events from non-input events. This will allow one code path
to use XIEvent, and the other to use XEvent in the future. This commit
has involved plenty of indenting changes, so it's better seen with
git diff -b or &ignorews=1
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Since we want nice alt-tab applications for gnome-shell, we should up the
limit to 96. In the future, we probably want to get rid of the icon-cache,
and allow looking up a correctly sized icon directly from the window.
To prevent app breakage, set the legacy WM_HINTS pixmap size directly to
32x32.
https://bugzilla.gnome.org/show_bug.cgi?id=689651
Add an additional "switcher" keybinding for switching between
applications rather than windows (like the existing 'switch-windows'
and 'switch-group' bindings).
The purpose of the new keybinding is to be taken over by gnome-shell's
application-based alt-tab popup, so rather than actually implementing
an application switcher in mutter, let it duplicate the normal window
switcher when run standalone.
https://bugzilla.gnome.org/show_bug.cgi?id=688913
Currently meta_display_get_tab_list() will only return windows on
a single workspace. Make the workspace parameter optional to allow
requesting windows from all workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=688913
The window positioning is delayed in idle_move_resize() in case the application
resizes/maximizes its window quickly after its creation. The delayed
positioning uses window->user_rect because of bug 426519 comment 3 (see
meta_window_move_resize_now()).
user_rect was not set in the initial positioning, causing the delayed
positioning unable to know which monitor we use for this window. As a
consequence, the window could jump spontaneously from one monitor to another.
With this patch, the window does not jump anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=556696
As the overlay key works differently from normal keybindings, it
requires special treatment. However, by adding a rudimentary
MetaKeyBinding for it, we will be able to confine the special
handling to mutter and treat it like any other keybinding in
the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently keybindings are blocked while the compositor holds a grab; if
we want a keybinding to be available anyway, we use captured ClutterEvents
to determine the KeyBindingAction the event would have triggered and
run our own handlers (ugh).
Instead, provide a hook to allow the compositor to filter out keybindings
before processing them normally, regardless of whether the compositor
holds a grab or not.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
The X server sends a XkbNewKeyboardNotify event for each keyboard
device when a new keyboard description is loaded. These days a typical
computer has several keyboard devices, e.g. xinput on this laptop
lists 8. Since the work we do on these events is relatively expensive
and we are only really interested in changes to the virtual core
keyboard we can skip other devices' events to cut on needless work.
https://bugzilla.gnome.org/show_bug.cgi?id=674859
When using the show-desktop shortcut with no desktop window, unshowing
will focus the second-most-recently-used window. If we find a desktop
window, it will be focused explicitly and everything works as expected;
however without a desktop window, we end up hiding the focus window,
which will use focus_default_window() with the not_this_one parameter
to move focus away. We used to get away with this, as the not_this_one
parameter was ignored until commit e257580b94, now with bug 675982
fixed, we need to explicitly handle the show-desktop case.
https://bugzilla.gnome.org/show_bug.cgi?id=686928
On startup, workspaces are initialized according to the num-workspaces
preference. However when using dynamic workspaces, the actual number
of workspaces in use might be greater than the preference (when
replacing the window manager), forcing windows on those workspaces
to the first workspace.
To fix, ignore the preference completely when using dynamic workspaces
and try to restore the previous number of workspaces (as read from
_NET_NUMBER_OF_DESKTOPS).
https://bugzilla.gnome.org/show_bug.cgi?id=685439
Fixes bug #670396. Without this fix the guard window may not
extend over the whole area of the screen after a XRandR
reconfiguration. The effect being that mouse events are
delivered to invisible windows.
Moving focus immediately on crossing events as we currently do
in focus-follows-mouse mode may trigger a lot of unwanted focus
changes when moving over unrelated windows on the way to a target.
Those accidental focus changes prevent features like GNOME Shell's
application menu from working properly and are visually expensive
since we now use a very distinct style for unfocused windows.
Instead, delay the actual focus change until the pointer has stopped
moving.
https://bugzilla.gnome.org/show_bug.cgi?id=678169
If someone plugs in a new monitor, while all their regular windows
should move in absolute X coordinates to ensure they stay on the
same monitor, the desktop window should stay put.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
Simplify the set of window-property functions to remove the
unused functions:
meta_window_reload_properties_from_xwindow()
meta_window_reload_properties()
And to make:
meta_window_reload_property()
static. The code is considerably simplified by removing the
plural variants.
https://bugzilla.gnome.org/show_bug.cgi?id=587255
Plenty of ugly here, but it works; revert when the zenity version
we depend on stops being bleeding-edge (or we can assume a zenity
version that does not error out on unknown options).
https://bugzilla.gnome.org/show_bug.cgi?id=684306
Quotes should definitively part of the translation, but we are in
string freeze now - revert this when we get a string freeze approval
or after the freeze ends.
https://bugzilla.gnome.org/show_bug.cgi?id=684306
As plugins can now define their own keyboard shortcuts via
meta_display_add_keybinding(), it makes sense for them to
expose those shortcuts to System Settings, so add some API
to set the properties gnome-control-center uses to pick up
wm keybinding settings.
https://bugzilla.gnome.org/show_bug.cgi?id=671010
When changing the overlay-key setting, the change only takes effect
on restart - there are actually two bugs involved:
(1) the test whether the key has changed is located in the
else part of a test for string settings (and overlay-key happens
to be a string settings ...)
(2) with (1) fixed, a change signal is emitted, which triggers a
reload of all keybindings - unfortunately, the actual value
of overlay-key is only read on startup, so the key is reloaded
using the old value
Fix both issues by replacing the custom handling of the overlay-key
with the regular handling of string preferences.
https://bugzilla.gnome.org/show_bug.cgi?id=681906
When we consider tiling a special case of maximization, it makes
more sense to always unmaximize to the normal state rather than
restoring a previous tile state.
https://bugzilla.gnome.org/show_bug.cgi?id=677565
