Pass the backend to a new factory function, and keep a pointer to the
monitor manager, which is accessed elsewhere in the same file instead of
fetching the singleton. The HW cursor initialization part is also made
more obvious, without depending on seemingly irrelevant clutter
features.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move finding, opening and managment of the KMS file descriptor to
MetaMonitorManagerKms. This means that the monitor manager creation can
now fail, both if more than one GPU with connectors is discovered, or
if finding or opening the primary GPU fails.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The monitor manager instance was created and setup in one step; at
construction. This is problematic if, in the future, the monitor manager
creation can fail, as the monitor manager is created quite late.
To make it possible to in the future fail creating a monitor manager,
create the instance very early when initiating the backend, then on
post init backend setup, "setup" the monitor manager state, i.e. read
the current state and setup the stage.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The error was printed, then dropped, eventually resulting in another
generic error being printed. Lets just propogate the error all the way
up instead.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with Xrandr MetaCrtcs and related functionality to its
own file. Eventually, MetaCrtcCrtc should be introduced, based on
MetaCrtc, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with X11 MetaOutputs and related functionality to its
own file. Eventually, a MetaOutputXrandr should be introduced, based on
MetaOutput, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with MetaCrtcKms and related functionality to its
own file. Eventually, MetaCrtcKms should become a GObject based on
MetaCrtc, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Instead of passing it around or fetching the singleton, keep a pointer
to the monitor manager that owns the CRTC. This will eventually be
replaced with a per GPU/graphics card object.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with MetaOutputKms and related functionality to its
own file. Eventually, MetaOutputKms should become a GObject based on
MetaOutput, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Instead of passing it around or fetching the singleton, keep a pointer
to the monitor manager that owns the output. This will eventually be
replaced with a per GPU/graphics card object.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Convert MetaCrtcMode from a plain struct to a GObject. This changes the
storage format, and also the API, as the API was dependent on the
storage format.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Turn MetaCrtc into a GObject and move it to a separate file. This
changes the storage format, resulting in changing the API for accessing
MetaCrtcs from using an array, to using a GList.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Add meta_logical_monitor_foreach_crtc() helper to iterate over all the
active CRTCs driving the monitors associated with the specified logical
monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Turn MetaOutput into a GObject and move it to a separate file. This
changes the storage format, resulting in changing the API for accessing
MetaOutputs from using an array, to using a GList.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
If a configuration key matched a current system state, but no monitor
mode was found (for example because of an incorrect refresh rate),
discard it while logging a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=787668
People that relied on xsetwacom to configure their tablets used to get
away with this by disabling the wacom g-s-d plugin prior to running
their scripts. This is not possible anymore with mutter managing device
configuration.
Given that X11 shall not go away soon and there's a core of stubbornly
accustomed users, provide a MUTTER_DISABLE_WACOM_CONFIGURATION envvar
to provide *some* way to do this.
When saving and restoring monitor configurations, we must take disabled
monitors into account, as otherwise one cannot store/restore a
configuration where one or more monitors are explicitly disabled. Make
this possible by adding a <disabled> element to the <configure> element
which lists the monitors that are explicitly disabled. These ones are
included when generating the configuration key, meaning they'll be
picked up correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=787629
The XIQueryDevice function used by device_query_area can return a NULL
pointer and set n_devices to a negative number in some cases. We add
additional checks to prevent a segfault.
https://bugzilla.gnome.org/show_bug.cgi?id=787649
When rotating 90/270 degrees we need to swap width and height. This fixes
the screen going black and the following errors showing in the journal:
gnome-shell[1097]: Failed to set CRTC mode 800x1280: No space left on device
gnome-shell[1097]: Failed to flip: Device or resource busy
gnome-shell[1097]: Failed to set CRTC mode 800x1280: No space left on device
gnome-shell[1097]: Failed to set CRTC mode 800x1280: No space left on device
When rotating a tablet with accelerometer 90/270 degrees.
https://bugzilla.gnome.org/show_bug.cgi?id=787836
We currently have a hard coded limit on logical monitor sizes, meant
for filtering out monitor scales that would result in awkward desktop
sizes. This has the side effect of also disqualifying scale 1 for
resolutions that themself are lower than the mentioned limit. To avoid
listing no supported scales, always add the fallback scale 1 if no
other was added.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
When we update state, we might not have set the current config yet (for
example if the Xrandr assignment didn't change), so pass the monitors
config we should derive from instead of fetching it from the monitor
config manager.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
We currently only save synchronously when running the test suite, but
should still not leak the generated config buffer. We also created the
cancellable but never used it if we saved synchronously, so lets stop
doing that too.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
The cancellable should only be cleared if we weren't cancelled, as if
we were cancelled, the path cancelling have already cleared the
cancellable.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
We cleaned up an unused monitor config list, but what we should do is
clear up the logical monitor config list. This commit does that, as
well as removes the unused monitor config list.
We have not enough control over the sources of the refresh rate
float variable to make == comparisons reliable, add some room
when comparing these.
https://bugzilla.gnome.org/show_bug.cgi?id=787668
The reverted commit seems to cause
https://bugzilla.gnome.org/show_bug.cgi?id=787240 for some reason. Lets
be safe and revert it for now, as the code freeze is just around the
corner.
This partly (it doesn't reintroduce a whitespace issue) reverts commit
dbc63430d8.
The foreach CRTC monitor mode helper incorrectly iterated over outputs
without CRTC when non-tiled modes were set on tiled monitors. This was
not expected by callers, so fix the helper to only iterate over active
outputs (that has or should have a CRTC).
The test cases uses the incorrect behaviour of the foreach CRTC helper
to check that the disabled outputs mode are set to NULL, so add a
foreach output helper and change the tests to use that instead.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
When headless, we don't have any logical monitors to derive a screen
size from, but we can't set it to empty as that will cause issues with
the clutter stage, UI widget layout and other things. To avoid such
issues, just fall back to a 640 x 480 screen size when headless.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
Due to rounding issues, we can't assume a floating point calculation
will end up on an integer, even if we got the factor from the reverse
calculation. Thus, to avoid casting away values like N.999... to N,
when they should really be N+1, round the resulting floating point
calculation before casting it to int.
This fixes an issue where using the scale ~1.739 on a 1920x1080 mode
resulted in error when setting the mode, as the calculated size of the
framebuffer was only 1919x1080.
https://bugzilla.gnome.org/show_bug.cgi?id=786918
When a screen cast session is stand-alone, i.e. not created given a
remote desktop session managing it, allow calling the Start/Stop
methods to start and stop it.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
As of commit 5f5ef3de2cdc816dab82cb7eb5d7171bee0ad2c5 in pipewire the
stream creator can find out the node ID of the stream it created.
So instead of using a special purpose entry to the info property box to
let the application discover stream by monitoring added nodes searching
for the given special purpose entry, just pass the node directly.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
When the PipeWire context or stream ends up in an error state, signal
that the source has closed. This then triggers the stream and finally
the session to be closed too.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
This commit adds basic screen casting and remote desktoping
functionalty. This works by exposing two D-Bus API services:
org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop.
The remote desktop API is used to create remote desktop sessions. For
each session, a D-Bus object is created, and an application can manage
the session by sending messages to the session object. A remote desktop
session the user to emit input events using the D-Bus methods on the
session object. To get framebuffer content, the application should
create an associated screen cast session.
The screen cast API is used to create screen cast sessions. One can so
far either create stand-alone screen cast sessions, or a screen cast
session associated with a remote desktop session. A remote desktop
associated screen cast session is managed by the remote desktop session.
So far only remote desktop managed screen cast sessions are implemented.
Each screen cast session may have one or more streams. A screen cast
stream is a stream of buffers of some part of the compositor content.
So far API exists for creating streams of monitors and windows, but
only monitor streams are implemented.
When a screen cast session is started, the one PipeWire stream is
created for each screen cast stream created for the session. When this
has happened, a PipeWireStreamAdded signal is emitted on the stream
object, passing a unique identifier. The application may use this
identifier to find the associated stream being advertised by the
PipeWire daemon.
The remote desktop and screen cast functionality must be explicitly be
enabled at ./configure time by passing --enable-remote-desktop to
./configure. Doing this will build both screen cast and remote desktop
support.
To actually enable the screen casting and remote desktop, the user must
enable the experimental feature. See
org.gnome.mutter.experimental-features.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
When monitors changed, previous monitor instances are defunct, and any
reference holder should drop its reference. Sometimes they will want to
continue having a reference to the same monitor, so add this function
to make it possible to find it.
Currently the output and crtc references are invalid, as they are not
yet reference counted, so this can only look at cached fields.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
Trying to unilaterally require eglGetPlatformDisplayEXT causes problems in
scenarios where this method is not available. Besides, this should only be
required on Wayland, so we can stop requiring it always and simply let the
eglGetPlatformDisplay() function error accordingly when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=786619
The HW cursor plane can't do any transformations, and as we still don't
pre-transform any buffer before uploading to the cursor plane, we must
disable the HW cursor when a logical monitor is transformed.
This worked previously because the transform of a MetaCrtc did not
correspond to the transform of a CRTC, but the transform of the logical
monitor the CRTC was assigned to.
https://bugzilla.gnome.org/show_bug.cgi?id=786023
When another D-Bus call that just tries to verify a configuration is
made, don't cancel any active monitor configuration dialog, as doing so
would effectively confirm queried configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=786023
Add API to get the layout group (layout index) currently active. In the
native backend this is done by fetching the state directly from the
evdev backend; on X11 this works by listening for XkbStateNotify
events, caching the layout group value.
https://bugzilla.gnome.org/show_bug.cgi?id=786408
Don't wait for clutter to initialize for connecting to X11; do it when
constructing the backend instance. This way we can later depend on
having an X11 connection earlier during initialization.
https://bugzilla.gnome.org/show_bug.cgi?id=786408
When opening a laptop lid, one will likely want to restore the
configuration one had prior to closing it, so when ensuring monitor
configuration, first try to see if the previously set configuration is
both complete (all connected monitors are configured) and applicable
(it is a valid configuration) and only try to generate a new from
scratch if that failed.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In order to go back in monitor configurations, save them to a history.
The history is implemented as a max 3 element long queue, where newly
set configurations are pushed to the head, and old are popped from the
tail.
The difference between using a single previous config reference and a
queue is that we can now remember the configuration used prior to a
D-Bus triggered configuration when the user discarded the configuration.
This will later be used to restore a previous configuration when a
laptop lid is opened.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This commit changes the new configuration system to use monitors.xml
instead of monitors-experimental.xml. When starting up and the
monitors.xml file is loaded, if a legacy monitors.xml file is
discovered (it has the version number 1), an attempt is made to migrate
the stored configuration onto the new system.
This is done in two steps:
1) Parsing and translation of the old configuration. This works by
parsing file using the mostly the old parser, but then translating the
resulting configuration structs into the new configuration system. As
the legacy configuration system doesn't carry over some state (such as
tiling and scale used), some things are not available. For tiling, the
migration paths makes an attempt to discover tiled monitors by
comparing EDID data, and guessing what the main tile is. Determination
of the scale of a migrated configuration is postponed until the
configuration is actually applied. This works by flagging the
configuration as 'migrated'.
2) Finishing the migration when applying. When a configuration with the
'migrated' flag is retrieved from the configuration store, the final
step of the migration is taken place. This involves calculating the
preferred scale given the mode configured, while making sure this
doesn't result in any overlapping logical monitor regions etc.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The zero-initialized winsys id was incorrectly used as the key to find
the old output to base active/primary state from, which would never
succeed unless the winsys id happened to be 0. Fix this by using the
winsys id that will be used, i.e. the connector id.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The 'normal' transform has the value 0, so the g_warn_if_fail()
expression failed. Correct it so that it doesn't complain when no
transform is checked.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The problem is that libinput offers the possibility to not enabled
dragging when tap-to-click is enabled but mutter doesn't. For people who
have a sensitive touchpad and who like tap-to-click option, dragging is
launched even when you don't want it : for example, when you select a
folder, most of the time the folder is dragging whereas just selected or
when you want to select some lines of a text file, several lines are
moved as a cut-paste which is not expected and erase datas.
To fix it, you need to have the possibility to desactivate the drag
option when you use tap-to-click in mutter. Because it's already a
specification of libinput, it remains to add it to mutter.
Implementation with X11 is added too.
https://bugzilla.gnome.org/show_bug.cgi?id=775755
When suspending (i.e. VT switching away, the GDM gnome-shell instance
gets hidden, or changing user), destroy the onscreen and offscreen
monitor framebuffers. When resuming, the stage views and framebuffers
will be recreated anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=786299
This will allows us to support the XF86Display key present on some
laptops, directly in mutter. This is also known, in evdev, as
KEY_SWITCHVIDEOMODE.
The common usage for this key is to alternate between a few well known
multi-monitor configurations though these aren't officially
standardized. As an example, Lenovo documents it as:
"Switches the display output location between the computer display
and an external monitor."
On this patch, we're just introducing the configurations that have been
implemented in g-s-d until now, which go a bit beyond the above
description.
https://bugzilla.gnome.org/show_bug.cgi?id=781906
Instead of letting MetaMonitor derive the logical monitor size, then
using the main monitor for the position, just let MetaMonitor derive
the whole layout including the position. This means it can deal with
tiled monitors better, for example when the main output (the output
always active when the monitor is active) is not the origin output (the
output with tile position (0, 0)).
https://bugzilla.gnome.org/show_bug.cgi?id=781723
Just like we do for buttons, with a few twists. These have 2 directions
mappable to different keycombos, and are affected by the current mode
in their group.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
This basically moves g-s-d's orientation plugin into mutter so that
eventually g-s-d doesn't need to build monitor configurations by
itself anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=781906
When verifying if a configuration is applicable, don't set it as
current when applying succeeded, or else reverting to a previous
configuration doesn't work after having verified.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
Differentiate between non-interlaced and interlaced modes. This is done
by appending an "i" after the resolution part of the mode ID, and
adding a 'is-interlaced' (b) property to the mode properties.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To be more flexible without having to change any D-Bus type signatures
in the future, replace the 'uint' flags value (currently determining
whether a mode is current and/or preferred) with a variant lookup table.
The keys 'is-current' (b) and 'is-preferred' (b) replace the existing
flags.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To be able to add more modes types that happen to have the same
resolution and refresh rate, change the API to specify modes using an
ID string. The ID string is temporary, and only works for associating a
mode for the monitor instance that it was part of.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When calculating sizes given some size and a fractional logical monitor
scale with precision loss, round the result of the floating point
calculation to the closest integer, as otherwise we might end up with
result smaller by 1 if there was a loss of precision when calculating
the scale.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To be able to render the pointer cursor sprite at sub-(logical)-pixel
positions, track the pointer position using floats instead of ints.
This also requires users of the cursor sprite rect to deal with
floating points, when e.g. finding the logical monitor etc.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When passing scales over D-Bus, we'll loose some precision. To set the
correct scale, use the configured scale and look up the one actually
supported by the monitor mode, and use that. To match the supported one
with the configured one, the difference must be within rounding error
range.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
We manually scaled pointer motions when they travel over a scaled
monitor. When a stage view of a monitor is also scaled, in practice this
meant we scaled twice. Avoid this by only manually scaling the pointer
motion when stage views are not scaled.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When using logical sized monitors we are allowed to use fractional scaling
but only if the resulting scaled logical monitor size is in integer form.
So, in order to get this, we allow to scale the monitor to up to
8 fractional values per integer, doing some computation in order to
fetch the nearest values which are closer to the scaling factors we can
permit.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
This changes the API to pass supported scales per mode instead of
providing a global list. This allows for more flexible scaling
scenarious, where a scale compatible with one mode can still be made
available even though another mode is incompatible.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When the logical layout mode is used, allow configuring the scaling to
be non-integer. Supported scales are so far hard coded to include at
most 1, 1.5 and 2, and scales that doesn't result in non-fractional
logical monitor sizes are discarded.
Wayland outputs are set to have scale ceil(actual_scale) meaning well
behaving Wayland clients will provide buffers with buffer scale 2, thus
being scaled down to the fractional scale.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To support fractional scaling, change the stage view scale to be a
float instead of an int. Also change the places where it is retrieved
and used when scaling things.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
Previously gnome-shell listened on the Xft Xsettings via GTK+s
GtkSettings to get the font DPI setting. The Xsetting might not
be what we want, and we should not rely on Xsettings when we don't need
to, so lets manage it ourself.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
The caller in clutter really expects an error if fd==-1, so make
sure we set one here. Otherwise we get a nice crash in addition to
the failure to open the /sys file. Also, retry on EINTR.
https://bugzilla.gnome.org/show_bug.cgi?id=784881
With GLVND, whenever we have both Mesa's and NVIDIA's drives installed
in the system, initializing the GBM backend will always succeed,
regardless of what GPU you have on your system.
This is due to GBM's software rendering fallback.
It seems better to initialize the EGLDevice backend first, which will
fail to find a device match when given a non-NVIDIA GPU.
https://bugzilla.gnome.org/show_bug.cgi?id=784272
Wacom's display tablets typically do not have (0,0) coincident with the top
left corner of the screen. This "outbound" area must be taken into account
when setting the area or else an unexpected offset of the pointer will
occur.
https://bugzilla.gnome.org/show_bug.cgi?id=784009
It is possible to interpret the ammount of padding provided to the
*_set_tablet_area functions in two different and incompatible ways. The X11
backend effectively treats them as being input-centric (i.e., the padding
defines the size of the "dead zone" on the tablet) while the native backend
has an output-centric viewpoint (i.e., the padding defines the size of the
"dead zone" on the display) viewpoint. This difference in opinion causes the
cursor offset to change when switching between Xorg and a Wayland sessions.
The calibration utility within g-c-c does its calculations with an input-
centric viewpoint, so this patch modifies the native backend to work
correctly with these values. To change viewpoints, we can simply invert
the scale and negate the offset. It should be noted that this function
also forgot to apply scaling to the offsets (as required by the matrix
transform done by libinput) which would have further compounded the
cursor offset issue under Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=784009
It would only allow to alternate between the logical monitors, we actually
want to return NULL here so it can cycle to the whole span of monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=782032
Instead of checking all MetaMonitors in the monitor manager, we want to
look (as the function name says) in the MetaMonitors contained in the
given logical monitor.
Otherwise, it will return TRUE for every logical monitor, given we are
querying for an existing EDID.
https://bugzilla.gnome.org/show_bug.cgi?id=782032
Due to the pen/eraser device separation in X11, CLUTTER_TABLET_DEVICE does
not apply there, this device type is only used in native/evdev. Checking
for CLUTTER_PEN/ERASER_DEVICE makes the left-handed mode correctly applied
on tablets.
https://bugzilla.gnome.org/show_bug.cgi?id=782027
For devices connected via HDMI (supposedly TVs) we want have a
scale factor of 1 if we are *below* the smallest 4k resolution
width (not equal or above) and do the scaling factor computation
if we are above the limit. This check was apparently wrongly
ported from gnome-settings-daemon.
Based of a patch by Caolan McNamara <caolanm@redhat.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=777347
We will both create and destroy monitors during initialization (when
using the X11 backend), so don't try to access the monitor manager from
the backend, but store a pointer to it instead.
It's stored in MetaMonitor even though only MetaMonitorTiled uses it,
mostly because it makes more sense to store such a pointer there.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
In some circumstances, the origin tile (0, 0) is not the one that
should be used to drive the monitor when using a non-tiled mode. Update
MetaMonitorTiled to support this case. It also seems to be so that the
preferred mode might be some low resolution or bogus mode on these
monitors, so also adapt MetaMonitorTiled to manage to ignore the
preferred mode of a tiled monitor if the preferred mode doesn't use
both tiles.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
Only support suggested monitor positioning if the monitor is non-tiled.
Normally this functionality is used by virtual machines to provide a
hint of how to place the virtual monitors, and they don't tend to use
tiled monitors anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
This commit makes it possible to configure logical monitor scale also
when running on top of an X11 server using Xrandr. An extra property
'requires-globla-scale' is added to the D-Bus API is added to instruct
a configuration application to only allow setting a global logical
monitor scale.
This is needed to let gsd-xsettings use the configured state to set a
XSettings state that respects the explicit monitor configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The scale calculation doesn't really have anything to do with KMS, and
eventually we'll want to have mutter calculate the monitor scale for
non-KMS backends too, so move the scale calculation to MetaMonitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Introduce MetaSettings and add the settings managed by MetaBackend into
the new object. These settings include: experimental-features and UI
scaling factor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
hotplug_mode_update is used (mostly by VMs nowadays, and
VMware has implemented it) to inform that modes list (including
the preferred one) might change after an uevent.
However, when using MetaMonitorConfigManager we should
ignore this value at initialization level, or mutter
won't restore the configured values at startup.
https://bugzilla.gnome.org/show_bug.cgi?id=783073
Disable-while-typing disables the touchpad while the user is typing.
This patch introduces the necessary backend code to implement the
org.gnome.desktop.peripherals.touchpad.disable-while-typing setting of
gsettings-desktop-schemas which was implemented in commit
4c5b1c1df399d6afaaccb237e299ccd1d5d29ddd and released as part of 3.24.
This is known as dwt in libinput.
This patch has been tested on X11 and Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=764852
Let the backend implementations create their own input settings
backend, as is done with other backend specific special purpose
backends. Also use the macro for declaring the GType.
https://bugzilla.gnome.org/show_bug.cgi?id=782152
meta_backend_real_post_init() had some open coded initialization with
some unexpected interdependencies. Split these up and move them to their
own functions in order to make meta_backend_real_post_init() a bit more
readable.
https://bugzilla.gnome.org/show_bug.cgi?id=782152
g_hash_table_insert() doesn't replace the key. This was a problem
because the key was owned by the value inserted into the hash table, so
when a value was removed, the key was freed, meaning that the key in
the hash table was no pointing to freed memory. Fix this by using
g_hash_table_replace() instead, which work the same except that it
replaces the key with the one passed. This means that the key of a
value in the hash table is always the key owned by the value.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The guard for handling size differences between keys were broken, it
only checked if the key passed by the second argument ended up being
shorter.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
An inactive monitor will not be assigned to a logical monitor, so don't
try to match against those. This avoids a dereferencing a NULL when the
main output of an inactive monitor doesn't have an assigned CRTC.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of looking at the GTK+ settings, check the logical monitor
state and determine the UI scaling factor given the maximum logical
monitor scale. This is only enabled when the monitor config manager
feature is enabled, as only then can a scale be explicitly configured.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This adds a function to be used by gnome-shell to get the logical
monitor given a connector name. For now, use the same index integer
method to reference a logical monitor, but this should be revisited by
providing a better API later.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The connector returned is the one of the main output. In other words,
for tiled monitors, it is the connector of the (0, 0) tile, and for
non-tiled, it is simply the connector of the output.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The UI scaling depends on whether the framebuffers are scaled. Enable
the caller to determine the what scale its UI should be drawn in, in
relation to the stage coordinate space by calling this function. A new
singal "ui-scaling-factor-changed" is added in order to liston for for
changes.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Window scaling is a clutter feature used to enable automatic scaling of
stage windows when running under as an application in windowing system.
Clutter in mutter does not support running as a stand-alone application
toolkit, so lets remove this unused feature.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
When told to, MetaMonitorConfigStore will save the current
configuration state by replacing the monitors-experimental.xml file
(while backing a backup).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Derive the logical monitor position not by looking at the main output
(the (0, 0) tile), but the one that is placed on the top-left corner.
This might be the non-main output on certain transformations.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Only the first output of the first monitor of the primary logical
monitor should be made primary. This fixes an issue where the wrong
logical monitor ended up as primary when the logical state was derived.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Make the nested backend emulate how the real backends actually draw,
i.e. by drawing each CRTC separately. This makes it possible to test
different configuration paths that can take place on different
hardware, without having said hardware.
For example, by setting MUTTER_DEBUG_TILED_DUMMY_MONITORS and
MUTTER_DEBUG_NESTED_OFFSCREEN_TRANSFORM to "1", one can test a system
with MST (tiled) monitors where the GPU doesn't support some transform.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add the transform as a logical monitor parameter, both when getting the
current state and applying a new configuration. The transform is defined
to be identical to MetaMonitorTransform.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Adds a <transform> element to <logicalmonitor>. It has two possible sub
elemenst: <rotation> which can be normal, right, left or upside_down,
and <flipped> which can either be true or false.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add support for rotated monitors. This is done per logical monitor, as
every monitor assigned to a logical monitor must be transformed in the
same way. This includes being transformed on the same level; e.g. if
the backend does not support transforming any monitor of a logical
monitor natively, then all monitors will be transformed using the
offscreen intermediate framebuffer.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Always draw the stage to an offscreen framebuffer when using the nested
backend, so that we more emulate things more similarly to how it works
real-world, i.e. it'll work the way whether stage views are enabled or
not.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The CRTC position depends on the transform and how the transform is
implemented. The function calculating the positions still doesn't
support anything but the non-transformed case; this commit is in
preparation of adding support for transforms.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Keep track of the logical monitor transform. When a logical monitor is
transformed, all of its monitors are also transformed in the same way.
A logical monitor can either be transformed on the CRTC level, or using
an offscreen intermediate buffer. In both cases will the logical
monitor be transformed, but only in the latter will the view be
transformed.
MetaCrtcs::transform currently does not represent whether the CRTC is
configured to be transformed or not; only when the backend can handle
it does it correctly correspond to the actual CRTC configuration. This
is intended to change with MetaMonitorConfigManager.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Split up the MetaRendererX11 class into one for when running as a
X11 compositing manager, and one for when running as a nested Wayland
compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of using a environment variable, add a new 'experimental
feature' gsetting keyword "monitor-config-manager" that enables the use
of the new MetaMonitorConfigManager. This commit also makes it possible
to switch between the two systems without restarting mutter.
The D-Bus API is disabled when the experimental feature is not enabled,
and clients trying to access it will get a access-denied error in
response. A new property 'IsExperimentalApiEnabled' is added to let the
D-Bus client know whether it is possible to use the experimental API or
not.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The logical monitor config array ownership was transferred to the
config object when it was created, but was not unset when the config
verification failed, causing the clean up path for invalid configs to
try to clean up the same list again.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This commit adds support for rendering onto enlarged per logical
monitor framebuffers, using the scaled clutter stage views, for HiDPI
enabled logical monitors.
This works by scaling the mode of the monitors in a logical monitors by
the scale, no longer relying on scaling the window actors and window
geometry for making windows have the correct size on HiDPI monitors.
It is disabled by default, as in automatically created configurations
will still use the old mode. This is partly because Xwayland clients
will not yet work good enough to make it feasible.
To enable, add the 'scale-monitor-framebuffer' keyword to the
org.gnome.mutter.experimental-features gsettings array.
It is still possible to specify the mode via the new D-Bus API, which
has been adapted.
The adaptations to the D-Bus API means the caller need to be aware of
how to position logical monitors on the stage grid. This depends on the
'layout-mode' property that is used (see the DisplayConfig D-Bus
documentation).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This gsetting will allow the adding of keywords to a array, where each
keyword may enable an experimental feauter, if the given mutter version
supports that particular experimental feature. Emphasis is put on the
lack of guarantee that any such keyword has any effect. Currently no
keywords are defined.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Make the concept of maximum screen size optional, as it is not
necessarily a thing on all systems (e.g. when using the native backend
and stage views).
The meta_monitor_monitor_get_limits() function is replaced by a
meta_monitor_manager_get_max_screen_size() which fails when no screen
limit is available. Callers and other users of the previous max screen
size fields are updated to deal with the fact that the limit is
optional.
The new D-Bus API is changed to move it to the properties bag, where
its absence means there is no applicable limit.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a new D-Bus API that uses the state from GetCurrentState to
configure high level monitors, instead of low level CRTCs and
connectors. So far persistent configuration is not implemented, as
writing to the configuration store is still not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Logical monitors in a configuration must be adjecent to each other,
meaning there will be at least one pixel long side touching some other
logical monitor.
The exception to this is when there is only one logical monitor, which
cannot be adjecent to any other.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
We don't want to limit ourself to whole integers for configuration, as
that'd mean it wouldn't be able to provide configurations for
fractional scalings. Thus, change scales to be referred to as floats
instead of ints.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a 'is_underscanning' entry to the properties map, if the monitor
supports underscanning. The client should assume a monitor does not
support underscanning if no property was added.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a D-Bus method for getting the current monitor and logical monitor
state. Currently does not contain information about transforms or any
limitations (such as limited CRTCs and cloning).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Let the backends decide whether to just rebuild a derived state, or use
the NULL config to rebuild an empty logical state.
This also changes the expected screen size values of the no-outputs
test; as this case is actually handled now.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add support to configure the logical monitor scale. With this, it
becomes possible to override the automatically calculated scaling
number per logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Replace the 'scale' of an output with a vfunc on the MetaMonitorManager
class that takes a monitor and a monitor mode which calculates the
scale. On X11 this always returns 1, on KMS, the old formula is used.
On the dummy and test backends, the already configured values are
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The default (calculated) scale is derived from the output, but
ultimately set via the monitor scale. This will enable config files to
override the scale. Yet to be done is handling when a scale is not
supported by a backend (i.e. the X11 backend).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In some cases the hardware cursor is invisible when Mutter is launched from the
TTY, due to drmModeSetCursor2 failing without a fallback being set.
This patch captures the return value of drmModeSetCursor2 and in case of an
error, enables the texture based fallback. It adds a `broken` state, that is
checked in should_have_hw_cursor() and
meta_cursor_renderer_native_realize_cursor_from_*() to avoid copying every
cursor into a gbm buffer when we know it will fail every single time.
https://bugzilla.gnome.org/show_bug.cgi?id=770020
Quick motions can come across as too fast (or slow) if it crosses outputs
with different scales. If this happens, rebuild the motion delta applying
the scale that applies to each logical monitor the pointer is crossing.
https://bugzilla.gnome.org/show_bug.cgi?id=778119
To allow for more natural pointer movements from relative pointer
devices (e.g. mouse, touchpad, tablet tool in relative mode, etc), scale
the relative motion from libinput with the scale of the monitor. In
effect, this means that the pointer movement is twice as fast (physical
movement vs numbers of pixels passed) as before, but it also means that
the same physical movement crosses the distance in a GUI no matter if
it is on a HiDPI monitor or not.
https://bugzilla.gnome.org/show_bug.cgi?id=778119
Clutter's evdev input backend has no support for setting double
click timeout set by gnome-settings-daemon. This results in
touchpad click events timing out on wayland, because the
default timeout value wasn't enough.
This patch moves timeout setting to mutter and removes X11
backend specific setting from clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=771576
The code calculating the output scale involves calculations around pixel
and mm sizes, however we do compare post-transformation pixel sizes to
untransformed mm sizes, which breaks the DPI calculations. Fix this by
transforming back pixel sizes back to untransformed.
While we're at it, actually compare the output height to HIDPI_MIN_HEIGHT
instead of its width, it seems right according to the #define name and
comment.
https://bugzilla.gnome.org/show_bug.cgi?id=777687
The mitigation to avoid missing EDID blob was incorrect; the reason it
sometimes failed to read was a race between different applications all
trying to read the EDID at the same time. E.g. gnome-shell as GDM would
at the same time as the session gnome-shell try to read the EDID of the
same connector at the same time, triggering a race in the kernel,
making the blob reading ioctl occationally fail with ENOENT.
Remove this mitigation, as it didn't really mitigate anything; the race
could just as well happen when doing the actual read later.
https://bugzilla.gnome.org/show_bug.cgi?id=779837
When mutter is paused (i.e. not the DRM master), stop listening on
hotplug events. Instead read the current state and set modes when
resumed.
This avoids a race condition in the drm API which currently only
manages to properly deal with one application querying the EDID state
at the same time when there are multiple mutter instances running at
the same time (e.g. gnome-shell driving gdm at the same time as
gnome-shell as the session instance).
https://bugzilla.gnome.org/show_bug.cgi?id=779837
A MetaOutput is a connector, not exactly a monitor or a region on the
stage; for example tiled monitors are split up into multiple outputs,
and for what is used in input settings, that makes no sense. Change
this to use logical monitors instead of outputs.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
When no output was specified, the screen limit was used to calculate the
aspect ratio. The screen limit, however, is either just an arbitrary
number if no screen limit is applicable, or a hardware graphics buffer
limit, which has nothing to do with anything actually displayed. Change
it to use the screen size instead, to get something that makes more
sense when no output is found.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Expose via a new API whether the transform on a logical monitor is
handled by the backend. This was previously only exposed only in the
native backend. This will be used to emulate not supporting transforms
in the backend in the nested backend.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Previously, the size of the logical monitor was derived directly from
the tiling information. This works fine until we add transformations,
or set modes with a dimension different from the resulting resolution
when tiled. Fix this by traversing the assigned CRTC rects, as these
are already transformed by the configuration system.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
By setting the environment variable MUTTER_DEBUG_TILED_DUMMY_MONITORS
to "1", the dummy MetaMonitorManager backend used when running mutter
nested will create tiled monitors instead of single-output/CRTC
monitors. This makes it possible to test tiled monitor configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Refactor monitor generation by splitting the generation of modes, CRTCs
and outputs into a separate function. A side effect is that each output
will have its own set of possible modes.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Split up logical monitor cration into derived (when derived from
current underlying configuration) and non-derived (when creating from a
logical monitor configuration). This avoids that type of logic in the
logical monitor creation function.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Add support for non-tiled monitor modes on tiled monitors. This is done
by adding all the other supported modes, except the modes with the
same resolution as the tile dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
When adding a monitor and all its outputs, don't try to set the logical
monitor of the outputs CRTC if none was assigned. This might happen if
a tiled monitor only uses a subset of the connectors it are connected
via.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Don't set the CRTC rect and screen size at in read_current(), as those
depends on how the configuration is done. Instead, don't set the CRTC
rect at all, and update the screen dimensions when being configured.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
No XDnD events which notify DnD status change comes in Wayland. To emulate XDnD
behavior, MetaDnd checks whether there is a grab or not when the modal window
starts showing. When there is a grab, it processes the raw events from
compositor, and emits DnD signals for plugin.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
Implement MetaDnd for emitting DnD signals to plugins such as gnome-shell. The
xdnd handling code comes from gnome-shell, and it is hidden behind MetaDnd now.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
When running nested, the pointer can be outside of the stage, meaning
outside of any logical monitor. Handle this when getting the current
logical monitor by falling back to the first logical monitor when the
pointer coordinate is outside of any logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=779001
Whenever an EGLOutput consumer is temporary unable to handle
eglStreamConsumerAcquire() operations (e.g. during a VT-switch),
an EGL_RESOURCE_BUSY_EXT error is generated.
This change adds the appropriate error handling to flip_egl_stream() in
order to recover from such errors.
https://bugzilla.gnome.org/show_bug.cgi?id=779112
This change adds descriptions for the following errors to
get_egl_error_str():
- EGL_BAD_STREAM_KHR
- EGL_BAD_STATE_KHR
- EGL_BAD_DEVICE_EXT
- EGL_BAD_OUTPUT_LAYER_EXT
https://bugzilla.gnome.org/show_bug.cgi?id=779112
Set up things so that if the INTEL_swap_event extension is not present,
but the driver is known to have good thread support, we use an extra
thread and call glXWaitVideoSync() in the thread. This allows idles
to work properly, even when Mutter is constantly redrawing new frames;
otherwise, without INTEL_swap_event, we'll just block in glXSwapBuffers().
https://bugzilla.gnome.org/show_bug.cgi?id=779039
Split up the X11 backend into two parts, one for running as a
Compositing Manager, and one for running as a nested Wayland
compositor.
This commit also cleans up the compositor configuration calculation,
attempting to make it more approachable.
https://bugzilla.gnome.org/show_bug.cgi?id=777800
As all the relevant backends are expected to provide
ClutterPadButtonEvents, it makes no sense to split the information,
plus all other event fields are now available and might be needed
in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=771098
Using ClutterInputDeviceEvdev::output-aspect-ratio. This only applies
to devices which are not calibratable, so again we need to implement
this at the toolkit level.
https://bugzilla.gnome.org/show_bug.cgi?id=774115
We couldn't properly merge output-mapping matrix and calibration into
one. Now that libinput calibration matrix is free to use, we can
actually implement tablet calibration with it.
https://bugzilla.gnome.org/show_bug.cgi?id=774115
The initial state of the hardware cursor is not known, so always force
update it the first time we update the cursor. Do this by changing the
'force' flag of update_hw_cursor() to an 'invalidated' hw cursor state.
https://bugzilla.gnome.org/show_bug.cgi?id=771056
Clutter assumed seat0 which is most usually, but not always correct.
Add an evdev-backend specific function to allow passing the seat
that will be used for ClutterDeviceManager construction, which we
already obtain in MetaLauncher.
https://bugzilla.gnome.org/show_bug.cgi?id=778092
The MetaOutput::is_primary state was not correctly managed in two cases:
* for tiled monitors, the primary state got overridden when setting
the preferred resolution
* for laptop lid, it was not set if the laptop panel happened to be
the first output
https://bugzilla.gnome.org/show_bug.cgi?id=777732
MetaMonitorConfigStore provides an XML storage mechanism for
MetaMonitorConfigManager. It stores configuration files defined in the
same level as the MetaMonitorsConfig format, i.e. refers to high level
"monitors" and "monitor modes" instead of connectors and CRTCs.
Only reading custom files are implemented and so far unused.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Handle headless setup gracefully by having no logical monitors. This
commit only makes the monitor management code deal with it; other areas
may still not be able to handle it.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a meta_monitors_config_new() helper. It's exposed outside of
meta-monitor-config-manager.c already, as it'll be used externally in a
later commit.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Handle configuring when the laptop lid is closed. This is so far
handled by creating a linear configuration while ignoring the laptop
panel. Changing the current configuration will come later.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Move the UpClients notify::lid-is-closed signal handling into
MetaMonitorManager, and put the getter behind a vfunc. This means
Placing it behind a vfunc allows custom backends to implement it
differently; for example the test backend can mock the state.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Adds an API to get the position suggested by the backend. This
translates to position advertised by some VM:s, used to hint at a
position making the position more natural (i.e. placed similarly to how
it may be placed on the host desktop).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The new monitor configuration system (MetaMonitorConfigManager) aims to
replace the current MetaMonitorConfig. The main difference between the
two is that MetaMonitorConfigManager works with higher level input
(MetaMonitor, MetaMonitorMode) instead of directly looking at the CRTC
and connector state. It still produces CRTC and connector configuration
later applied by the respective backends.
Other difference the new system aims to introduce is that the
configuration system doesn't manipulate the monitor manager state; that
responsibility is left for the monitor manager to handle (it only
manages configuration and creates CRTC/connector assignments, it
doesn't apply anything).
The new configuration system allows backends to not rely on deriving the
current configuration from the CRTC/connector state, as this may no longer be
possible (i.e. when using KMS and multiple framebuffers).
The MetaMonitorConfigManager system is so far disabled by default, as
it does not yet have all the features of the old system, but eventually
it will replace MetaMonitorConfig which will at that point be removed.
This will make it possible to remove old hacks introduced due to
limitations in the old system.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Operate on MetaMonitor's instead of MetaOutput's, as the latter may be
only a subset of an actual "monitor" when referring to the physical
computer equipment.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
When a logical monitor constains monitors with different subpixel
ordering, make the wl_output have the subpixel order 'unknown' so that
clients don't make assumptions given only a subset of the monitors of
the given region.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Sometimes we hit a race on hot-plug where we try to read the KMS
resources and the EDID blob is not yet ready. This would normally
result in a ENOENT when retrieving the blob. Handle this by retrying
after 50 milliseconds after a hot-plug event. Do this up to 10 times,
and after that give up trying to get the EDID blob and continue with
best effort.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The function meta_monitor_manager_read_current_config() was renamed to
meta_monitor_manager_read_current_state() as it does not read any
configuration, but reads the current state as described by the backend.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In preparation of replacing the configuration system with one working
with high level monitors instead of low level outputs etc, move
configuarion handling code into obviously named function (containing
the word 'legacy'.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
A monitor spec object is meant to be used to identify a certain monitor
on a certain output. The spec is unique per actual monitor and connector,
meaning that a monitor that changes from one connector from another
(e.g. HDMI1 to HDMI2) will not be identified as the same. It is meant
to associate for example a configuration entry with an actual monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a "mode spec" concept, meaning to be used as a identifier for an
actual monitor mode. It consists of details making a mode unique, i.e.
the total resolution and refresh rate. This will later be used to get
the actual monitor mode (set of one or more CRTC modes).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add "monitor modes" abstracting the modes set on a monitor. On normal
monitors, this directly maps to the CRTC modes, but on tiled monitors,
a monitor mode can consist modes per tiled output.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Don't try to mirror the physical dimension, since that's a property of
one of the monitors, not of the logical monitor. Callers are changed to
deal with choosing the monitor to represent the logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Don't deal with adding/removing tiled Xrandr monitors in the generic
backend, but leave it to the Xrandr backend. The tiled monitor will
itself notify the backend when such a monitor is added and removed.
Tiled Xrandr monitors are now based no MetaMonitor instead of
MetaLogicalMonitor. This means that mirrored tiled monitors will now be
represented correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of using crtcs and outputs to generate logical monitors, use
the ready made monitor abstraction that hides irrelevant things such as
monitor tiling etc.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Generate a set of "monitors" abstracting the physical concepts. Each
monitor is built up of one or more outputs; multiple outputs being
tiled monitors. Logical monitors will later be built from these.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The MetaMonitorMode referred to the mode of a CRTC, and with the future
introduction of a MetaMonitor, theh old name would be confusing.
Instead call it what it is.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add private API for overriding the compositor configuration, i.e. the
compositor type (X11 WM or Wayland compositor) and backend type. This
will make it possible to add a special test backend used by src/tests/.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Put the monitor xinerama index in a separate struct that is attached to
the logical monitor using g_object_set/get_qdata(). Eventually this
should be moved to some "X11 window manager" object, but lets keep it
in MetaScreen until we have such a thing.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of storing the logical monitors in an array and having users
either look up them in the array given an index or iterate using
indices, put it in a GList, and use GList iterators when iterating and
alternative API where array indices were previously used.
This allows for more liberty regarding the type of the logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Refactor the tiled monitor assembly code (that constructs a logical
monitor out of tiling information. Part of the reason is to move away
from array based storage, part is to make the code easier to follow,
and part is to separate logical monitor construction from list
manipulation.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Change meta_monitor_manager_get_logical_monitor_at() to use floats,
replace users of meta_monitor_manager_get_monitor_at_point() to use the
API that returns a logical monitor and remove the now unused function.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Move the last piece of monitor grid getter API to the monitor manager
away from MetaScreen. The public facing API are still there, but are
thin wrappers around the MetaMonitorManager API.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The method used for getting the current logical monitor (the monitor
where the pointer cursor is currently at) depends on the backend type,
so move that logic to the corresponding backends.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Turning a rectangle into a logical monitor also has nothing to do with
the screen (MetaScreen) so move it to MetaMonitorManager which has that
information.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Let the backend initialize the cursor tracker, and change all call
sites to get the cursor tracker from the backend instead of from the
screen. It wasn't associated with the screen anyway, so the API was
missleading.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This is the current equivalent of looking up the logical monitor in the
logical monitor array using the number, but eventually that will be
deprecated, and before that done differently, so add a temporary helper
for the places that has not been ported yet.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
It was just pointer to the actual list; having to synchronize a list of
logical monitors with the actual monitors managed by the backend is
unnecessary.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In preparation for further refactorizations, rename the MetaMonitorInfo
struct to MetaLogicalMonitor. Eventually, part of MetaLogicalMonitor
will be split into a MetaMonitor type.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
src/backends/meta-egl.c: In function ‘set_egl_error’:
src/backends/meta-egl.c:144:16: error: format not a string literal and no format arguments [-Werror=format-security]
error_str);
^~~~~~~~~
https://bugzilla.gnome.org/show_bug.cgi?id=777389
Use the proposed EGL_WL_wayland_eglstream EGL extension instead of the
file descriptor hack that was used as a temporary solution.
Note that this results in EGL clients will no longer work if they are
running on a Nvidia driver with a version older than 370.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
We need to do swap notifications asynchronously from flip events since
these might be processed during swap buffers if we are waiting for the
previous frame's flip to continue with the current.
This means that we might have more than one swap notification queued
to be delivered when the idle handler runs. In that case we must
deliver all notifications for which we've already seen a flip event.
Failing to do so means that if a new frame, that only swaps buffers on
such a swap notification backlogged Onscreen, is started, when later
we get its flip event, we'd notify only an old frame which would hit
this MetaStageNative's frame_cb() early exit:
if (global_frame_counter <= presented_frame_counter)
return;
and we'd never finish the new frame and thus clutter's master clock
would be waiting forever stuck.
https://bugzilla.gnome.org/show_bug.cgi?id=774557
When flush-swap-notify is already queued, we might end up trying to
requeue it, for example when handling flip callbacks inside
swap-buffers. Actually queuing it there is harmless, since old frames
will be discarded anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=774923
We might still end up in swap-buffer without the previous flip callback
having been invoked. This can happen if there are two monitors, and we
manage to draw before having all monitor flip callbacks invoked.
https://bugzilla.gnome.org/show_bug.cgi?id=774923
This commit adds for a new type of buffer being attached to a Wayland
surface: buffers from an EGLStream. These buffers behave very
differently from regular Wayland buffers; instead of each buffer
reperesenting an actual frame, the same buffer is attached over and
over again, and EGL API is used to switch the content of the OpenGL
texture associated with the buffer attached. It more or less
side-tracks the Wayland buffer handling.
It is implemented by creating a MetaWaylandEglStream object, dealing
with the EGLStream state. The lifetime of the MetaWaylandEglStream is
tied to the texture object (CoglTexture), which is referenced-counted
and owned by both the actors and the MetaWaylandBuffer.
When the buffer is reattached and committed, the EGLStream is triggered
to switch the content of the associated texture to the new content.
This means that one cannot keep old texture content around without
copying, so any feature relying on that will effectively be broken.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
This commit adds support for using a EGLDevice and EGLStreams for
rendering on top of KMS instead of gbm. It is disabled by default; to
enable it pass --enable-egl-device to configure.
By default gbm is first tried, and if it fails, the EGLDevice path is
tried. If both fails, mutter will terminate just as before.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
There is no way to pass any backend specific parameters to a
CoglFramebuffer until after it has been allocated by
cogl_framebuffer_allocate() (since this is where the winsys/platform
fields are initialized). This can make it hard to actually allocate
anything, if the platform depends on some backend specific data.
A proper solution would be to refactor the onscreens and framebuffers to
use a GObject based type system instead of the home baked Cogl one, but
that'll be left for another day. For now, allocate in two steps, one to
allocate the backend specific parts (MetaOnscreenNative), and one to
allocate the actual onscreen framebuffer (via
meta_onscreen_native_allocate()).
So far there is nothing that forces this separation, but in the future
there will, for example EGLDevice's need to know about the CRTC in
order to create the EGLSurface.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
A swap-buffers should never be issued when we are waiting for a flipped
callback, so instead of trying to handle a situation that sholud never
happen, warn instead.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
When a swap failed with EACCES (possibly due to VT switching), don't
mark the framebuffer as 'in use', so that it'll be cleaned up properly
and not set as current.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
For when there is no gbm available, for example when using
EGLDevice/EGLStream's, just fall back to the OpenGL texture based
cursor rendering path.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Drivers may be bad at guessing what is passed to eglGetDisplay, ending
up return non-functioning EGLDisplay's. Using eglGetPlatformDisplay
avoids this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Lets use a pbuffer surface as a dummy surface instead of a gbm based
one, so that we don't need to rely on the availability of gbm to create
a dummy surface when there is no need for it.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Separate gbm initialization from general renderer initialization. Do
this even though no other initialization is done for now; later there
will will be other types of rendering mode, initialized in their own
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Add proc symbol loading and helper functions for calling them, dealing
with errors etc. So far no extension symbols are loaded, only the
infrastructure is there.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
In another step getting rid of the duplications introduced by Cogl,
use the equivalent GLib types where Cogl types previously used. While
CoglBool is not a typedef to gboolean, they are both typedefs to int,
and we already use GLib's TRUE/FALSE to set them.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Initialize the GError pointer used when creating the renderer. If an
error occurs, the error is expected to be NULL, otherwise it'll
misinterpreted as already set.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
The Clutter X11 backend can't drop CLUTTER_PEN_DEVICE and
CLUTTER_ERASER_DEVICE in favor of CLUTTER_TABLET_DEVICE without
losing information (as the driver will create one device for each).
So make MetaInputSettings cater for both sets of device types.
https://bugzilla.gnome.org/show_bug.cgi?id=773779
Its only purpose was caching settings applying to an stylus/tool, this
is now handled through ClutterInputDeviceTool evdev specific API, or
X device properties, so is not needed anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=773779
Stylus configuration (stylus buttons, pressure) was handled
at the very high level, doing the button and pressure translations
right before sending these to wayland clients.
However, it makes more sense to store these settings into the
ClutterInputDeviceTool itself, and have clutter apply the config
at the lower level so 1) the settings actually apply desktop-wide,
not just in clients and 2) X11 and wayland may share similar
configuration paths. The settings are now just applied whenever
the tool enters proximity, in reaction to
ClutterDeviceManager::tool-changed.
This commit moves all handling of these two settings to
the clutter level, and removes the wayland-specific paths
https://bugzilla.gnome.org/show_bug.cgi?id=773779
Enabling edge scrolling before disabling two finger would result in
edge scrolling not actually being enabled because two finger is still
enabled at the time and we bail out.
This patch moves this logic to common code for both the native and X
backends and fixes it by ensuring that both settings are never set at
the same time and still re-checking if edge scrolling should be
enabled after two finger scrolling gets disabled.
We also simplify the code by not checking for supported/available
settings since the underlying devices will just reject those values
and there isn't anything we can do about it here. It's the UI's job to
only show supported/available settings to users.
https://bugzilla.gnome.org/show_bug.cgi?id=771744
Checking for supported methods isn't needed since libinput will just
error out and do nothing itself if a requested method isn't supported
and, in fact, this logic was preventing the enum values 0 from being
set.
https://bugzilla.gnome.org/show_bug.cgi?id=771744
commit e2bfaf0751 does this:
g_hash_table_insert (cards,
g_udev_device_get_name (parent_device),
g_steal_pointer (&parent_device));
The problem is the g_steal_pointer call may happen before the
g_udev_device_get_name call leading to a crash.
This commit does the get_name call on an earlier line
https://bugzilla.gnome.org/show_bug.cgi?id=771442
Right now we accept any character device that matches the glob card*.
That's fine, but we can be a little more specific by checking that
the devtype is what we expect.
This commit does that.
https://bugzilla.gnome.org/show_bug.cgi?id=771442
Despite g_udev_client_new taking a list of subsystems, it doesn't
implicitly filter results to those subsystems.
This commit explicitly adds a subsystem match to make sure sound cards
don't end up in the resulting list of video cards.
https://bugzilla.gnome.org/show_bug.cgi?id=771442
Using the view's MetaMonitorInfo to find all the crtcs which should be
configured to display a given onscreen doesn't work unfortunately. The
association runs only the other way around, i.e. we need to go through
each crtc and find the ones corresponding to our monitor info.
https://bugzilla.gnome.org/show_bug.cgi?id=773115
If this isn't initialized and an idle watch gets instanced before
meta_idle_monitor_native_reset_idletime() gets called, that idle watch
would get triggered as soon as we hit the main loop.
This was causing gnome-session to go into idle mode at session start
thus making gnome-shell lock the screen.
In the past this bug was being masked by either logind emiting
session active signals or a stray input event making it through at
startup.
https://bugzilla.gnome.org/show_bug.cgi?id=772839
Going through the global mode pool and then checking if the mode is
available for a given output is pointless work since we can look at
the output's available modes directly.
This implicitly changes how we choose the default mode since, instead
of relying on the sort order of the global modes array, we now rely on
the sort order of the output modes array. Still not ideal, but at
least it makes more sense since the global array is essentially
unsorted.
https://bugzilla.gnome.org/show_bug.cgi?id=772176
This isn't technically needed and, in fact, makes us default to
interlaced modes in some cases which isn't desirable.
Note that X doesn't account for these flags either for its mode
refresh rates.
https://bugzilla.gnome.org/show_bug.cgi?id=772176
As the m format specifier doesn't consume any arguments, the number
of varargs currently doesn't match the number of specifiers; the
failed transform may be relevant, so include it in the message
instead of removing the excess argument.
backends/meta-input-settings.c:1245:27: error: format '%lx' expects
argument of type 'long unsigned int', but argument 3 has type 'guint64
{aka long long unsigned int}' [-Werror=format=]
Those will be unseen by g-s-d/g-c-c, so no settings will be written on
disk for those. Still, look up an ID correctly in this case instead of
crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=771628
This is needed to make the wayland backend react to configuration
changes until gnome-control-center is updated to use the
gsettings-desktop-schemas settings.
https://bugzilla.gnome.org/show_bug.cgi?id=771315
Some output devices only advertise their preferred mode even though
they're able to display others too. This means we can include some
common modes in each output's supported list.
This is particularly important for mirroring, since we can only mirror
outputs which are using the same resolution.
https://bugzilla.gnome.org/show_bug.cgi?id=744544
This signal allows interested parties to be notified of a new cursor
frame being painted regardless of whether it's being painted by the
backend directly or if it's a software rendered cursor frame handled
by clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=749913
Instead of hiding stage views enablement behind MUTTER_STAGE_VIEWS=1,
default to enable it, while making it possible to disable using
MUTTER_STAGE_VIEWS=0 instead.
https://bugzilla.gnome.org/show_bug.cgi?id=770366
Switch to the output naming logic used by the X server's modesetting
driver which, in particular, uses drmModeConnector's connector_type_id
instead of connector_id.
The kernel generates new connector_id's every time there are changes
which means we can't identify the same monitor on the same connector
after an hardware hotplug. Switching to connector_type_id fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=770338
We can only honor this properly in the MUTTER_STAGE_VIEWS=1 case. When using
the legacy view, software implemented transforms are only exposed if there is
only one output, as we can only transform the entire stage there.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The texture is only created if the view is transformed at the software level,
otherwise the texture is NULL, and rendering happens on the onscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The offscreen is given through the ::back-buffer property, the ClutterStageView
will set up the the CoglPipeline used to render it back to the "onscreen"
framebuffer.
The pipeline can be altered through the setup_pipeline() vfunc, so ClutterStageView
implementations can alter the default behavior of blitting from offscreen to
onscreen with no transformations.
All getters of "the framebuffer" that were expecting to get an onscreen have
been updated to call the right clutter_stage_view_get_onscreen() function.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
The call to _cogl_framebuffer_winsys_update_size() results in no-op here,
as the framebuffer has already the right size when rebuilding the views.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
Those will need a separate treatment from the modes that we eventually
support through "software", so split those into a separate enum so we
can can do the right thing when applying the configuration.
Also, add a helper function that returns the transform that the software
fallbacks should perform, which should be "normal" if the rotation is
already handled via hw.
The function applying the configuration has been modified to always set
a HW rotation mode (even if normal), when we come to support SW rotation
modes, we'll be relying on a normal transformation, so it will be
necessary to have mixed HW/SW managed transforms.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
As whether edge scrolling is enabled depends on whether two-finger
scrolling is disabled, make sure to update two-finger scrolling first.
Note that this only fixes the problem on startup. Changing the
settings in GSettings directly might cause an inconsistent state, but
the main UI for this setting, gnome-control-center, makes sure to
update two-finger scrolling before edge scrolling.
https://bugzilla.gnome.org/show_bug.cgi?id=769276
The scale will have been set to 1 no matter what when initializing the
MetaOutput since it at the time didn't have an CRTC assigned to it.
Now, when we assign the CRTC to the output, we need to update the scale.
https://bugzilla.gnome.org/show_bug.cgi?id=769505
Allocate the offscreen stage view framebuffers up front; otherwise they
may get allocated after the viewport calculated by the stage is set,
which would cause the viewport to be incorrect until recalculated.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Support changing the mouse and trackball acceleration profile. This
makes it possible to for example disable pointer acceleration by
choosing the 'flat' profile.
This adds an optional dependency on gudev. Gudev is used by the X11
backend to detect whether a device is a mouse or not. Without gudev
support, the accel profile settings has have effect for mouse devices.
Trackball still uses the "strstr" approach, since udev doesn't support
tagging devices as trackball devices yet.
https://bugzilla.gnome.org/show_bug.cgi?id=769179
Add support for setting edge-scrolling separately from two-finger
scrolling. We now have 2 separate boolean settings for those, with the
Mouse panel in gnome-control-center allowing to set only one of those at
a time, but nothing precludes both being set in the configuration.
We need to handle:
- two-finger-scrolling-enabled and edge-scrolling-enabled settings both
being set.
- those 2 settings being change out-of-order
- two-finger-scrolling being set on a device that doesn't support it
- edge-scrolling-enabled on a device that doesn't support it
And the combinations of one touchpad supporting just one of edge
scrolling and two-finger scrolling and another vice-versa.
https://bugzilla.gnome.org/show_bug.cgi?id=768245
Instead of continuing eventually crashing with a segmentation fault due
to a missing renderer, make MetaBackend an GInitable, and gracefully
handle the failure to fully create the backend with an EXIT_FAILURE.
https://bugzilla.gnome.org/show_bug.cgi?id=769036
It does nothing at the moment, but can be hooked into MetaWaylandTabletPad
now. For X11, we need to trigger these for the pad events we receive from
the passive pad button grabs.
This function will be useful for the wayland implementation, because buttons
are mapped at the time of sending those through the wire.
As x11/wayland implementations differ here, this function will be useful for
the wayland implementation, as the action is handled lat
Some settings make no sense on external tablets, and others make
no sense in display/system-integrated tablets. Perform those checks
so we don't end up with possibly broken configuration.
Given that information defines largely how such devices are to be
configured, it makes sense to have that information at hand. A getter
has been also added for the places where it could be useful, although
it will require HAVE_LIBWACOM checks in callers too.
They are already effectively interchangeable so this should reduce
pointless casts.
Just like in GDK though, we need to keep the old definition for
instrospection to be able to include the struct's fields.
By creating a pending gbm/EGL surface pair, only setting it on
swap-buffers, we would draw onto a buffer on the old surface, then swap
the buffer from the new surface, causing the first frame after a
hot-plug always having no content.
This was in the past not very noticable since some non-deterministic but
frequent side effect in gnome-shell caused hot-plugging to always render
two new frames, but after "Introduce regional stage rendering", this
side effect did not occur as often, thus making it more visible.
This commit updates the current gbm/EGL surface pair before painting a
frame, so that when the frame is painted, the surface with the correct
size is used and the buffer from correct surface is swapped.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Being a listener to a signal, it is inconvenient to enforce order of
execution between different signal listeners. If there are things in
the backend that should be updated before various other signal
handlers, make sure so is done by emitting the signal after having
explicitly notified the backend.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
CoglFrameInfo is a frame info container associated with a single
onscreen framebuffer. The clutter stage will eventually support drawing
a stage frame with multiple onscreen framebuffers, thus needs its own
frame info container.
This patch introduces a new stage signal 'presented' and a accompaning
ClutterFrameInfo and adapts the stage windows and past onscreen frame
callbacks users to use the signal and new info container.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Call a CoglContext "cogl_context", CoglDisplay "cogl_display" and
CoglRenderer "cogl_renderer" so that they won't be confused with
ClutterContext, MetaDisplay and MetaRenderer etc.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Make the cogl vfunc functions have names that are globally
discoverable. Calling the same function in every backend the same name
causes code navigation tools to not function properly. Rename the
affected functions to closer correspond to the style mutter uses.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Add support for drawing a stage using multiple framebuffers each making
up one part of the stage. This works by the stage backend
(ClutterStageWindow) providing a list of views which will be for
splitting up the stage in different regions.
A view layout, for now, is a set of rectangles. The stage window (i.e.
stage "backend" will use this information when drawing a frame, using
one framebuffer for each view. The scene graph is adapted to explictly
take a view when painting the stage. It will use this view, its
assigned framebuffer and layout to offset and clip the drawing
accordingly.
This effectively removes any notion of "stage framebuffer", since each
stage now may consist of multiple framebuffers. Therefore, API
involving this has been deprecated and made no-ops; namely
clutter_stage_ensure_context(). Callers are now assumed to either
always use a framebuffer reference explicitly, or push/pop the
framebuffer of a given view where the code has not yet changed to use
the explicit-buffer-using cogl API.
Currently only the nested X11 backend supports this mode fully, and the
per view framebuffers are all offscreen. Upon frame completion, it'll
blit each view's framebuffer onto the onscreen framebuffer before
swapping.
Other backends (X11 CM and native/KMS) are adapted to manage a
full-stage view. The X11 CM backend will continue to use this method,
while the native/KMS backend will be adopted to use multiple view
drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
In preperation for having allowing drawing onto multiple onscreen
framebuffers, move the onscreen framebuffer handling to the
corresponding winsys dependent backends.
Currently the onscreen framebuffer is still accessed, but, as can seen
by the usage of "legacy" in the accessor name, it should be considered
the legacy method. Eventually only the X11 Compositing Manager backend
will make use of the legacy single onscreen framebuffer API.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Split the stage window implementations into three separate objects: one
for X11 as a compositing manager, one for X11 running as a nested
Wayland compositor, and one for running with the native backend.
The new stage window implementations are only thin shells; this is in
preparation for making the stage windows behave more differently.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
The stage resizing was placed in the generic backend, which was only
run on certain configurations (when running nested or using the native
backend). This commits makes the resizing more explicit thus more
obvious.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
This commit completes the move of monitor logic to the monitor
mangager. The renderer now only deals with framebuffers, asking the
monitor manager to do the crtc flip tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Let MetaMonitorManagerKms manage KMS modes. This lets us pass less
state to MetaRendererNative. Instead let MetaMonitorManager tell the
monitor manager when it should set the mode and with what framebuffer.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Absorb the CoglRendererKMS struct into MetaRendererNative. The gbm
device initialization is moved earlier so that the renderer fails to
initialize if the gbm device creation failed.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Move the KMS interaction from cogl into mutter, where most of the other
KMS interaction already takes place. This also removes dead code which
were only excercised when non-mutter callers used the cogl KMS backend.
The cogl KMS API was updated to pass via MetaRendererNative instead of
via the different cogl objects.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Instead of passing around the KMS file descriptor via clutter to cogl,
just make our own clutter backend create the cogl renderer and set the
KSM fd.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
MetaRenderer is meant to be the object responsible for rendering the
scene graph. It will contain the logic related to the cogl winsys
backend, the clutter backend, and the clutter stage window.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Use the correct pointer types for cogl objects. This avoids warnings
when including the cogl headers doesn't result in all the cogl types
being typedefs to void.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Introduce two new clutter backends: MetaClutterBackendX11 and
MetaClutterBackendNative. They are so far only wrap ClutterBackendX11
and ClutterBackendEglNative respectively, but the aim is to move things
from the original clutter backends when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Emit a signal so that interested parties can recreate their FBOs and
queue a full scene graph redraw to ensure we don't end up showing
graphical artifacts.
This relies on the GL driver supporting the
NV_robustness_video_memory_purge extension and cogl creating a
suitable GL context. For now we only make use of it with the X backend
since the only driver with which this is useful is NVIDIA.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
All the upper layers are prepared for multiple onscreen cursors, but
this. All MetaCursorRenderers created would poke the same internal
MetaOverlay in the stage.
This will lead to multiple cursor renderers resorting to the "SW"
rendering paths (as it can be seen with tablet support) to reuse the
same overlay, thus leading to flickering when a different
MetaCursorRenderer takes over the overlay.
Fix this by allowing per-cursor-renderer overlays, their lifetime
is attached to the cursor renderer, so is expected to be tear down
if the relevant device (eg. tablet) disappears.
Sadly, GLib's autoptr cleanup macros cannot be detected by the C
pre-processor, because they generate a function. This means that we are
forced to bump up the dependency on GLib 2.49, in order to build against
a newer version of gdbus-codegen.
Starting from GLib 2.49, the gdbus-codegen tool automatically generates
the auto cleanup symbols for the GDBus proxy and skeleton interfaces.
Since we don't depend on a specific version of GLib we need to
conditionally generate the auto cleanup symbols in case an older version
of gdbus-codegen is used when building Mutter.
This commit unbreaks the build under GNOME Continuous, which has been
failing with:
usr/include/glib-2.0/glib/gmacros.h:415:43: error: redefinition of 'glib_autoptr_cleanup_Login1Session'
#define _GLIB_AUTOPTR_FUNC_NAME(TypeName) glib_autoptr_cleanup_##TypeName
^
[...]
/usr/include/glib-2.0/glib/gmacros.h:415:43: note: previous definition of 'glib_autoptr_cleanup_Login1Session' was here
./meta-dbus-login1.h:82:1: note: in expansion of macro 'G_DEFINE_AUTOPTR_CLEANUP_FUNC'
G_DEFINE_AUTOPTR_CLEANUP_FUNC (Login1Session, g_object_unref)
^
Wrap the existing laptop_display_is_on() method in a public function
that gnome-shell can use to query whether a builtin output is present
and enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=765267
While CoglError is a define to GError, it doesn't follow the convention
of ignoring errors when NULL is passed, but rather treats the error as
fatal :-(
That's clearly unwanted for a compositor, so make sure to always pass
an error parameter where a runtime error is possible (i.e. any CoglError
that is not a malformed blend string).
https://bugzilla.gnome.org/show_bug.cgi?id=765058
The previous configuration might not apply because the number of
enabled outputs when trying to apply it might have changed. This isn't
a bug so we shouldn't assert. Instead, we can handle it by falling
back as we would if we didn't have a previous configuration to start
with.
https://bugzilla.gnome.org/show_bug.cgi?id=764286
On the X11 backend we don't track the pointer position in
priv->current_x/y which remain set to zero. That means we never set
the clutter stage cursor if point 0,0 isn't covered by any monitor
since we return early.
Commit 4bebc5e5fa introduced this to
avoid crashing on the prepare-at handlers when the cursor position
doesn't fall inside any monitor area but we can handle that higher up
in the stack. In that case, the sprite's scale doesn't matter since
the cursor won't be shown anyway so we can skip setting it.
https://bugzilla.gnome.org/show_bug.cgi?id=763159
It indirectly triggers expensive operations in gnome-shell
(js/ui/keyboard.js), which turns out too expensive if we happen to operate
the shell simultaneously with 2 devices that will trigger the operations
there.
So just rate limit the signal emission, defer to an idle and just emit
the last device gotten. Worst that will happen is that we may possibly
emit the signal on the same device consecutively.
https://bugzilla.gnome.org/show_bug.cgi?id=753527
If we rely on getting back an input event with the warped pointer
coordinates, we might draw a frame with the old coordinates if we warp
during the paint phase. Avoid that by moving the cursor immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
The wp_pointer_constraints protocol is a protocol which enables clients
to manipulate the behavior of the pointer cursor associated with a seat.
Currently available constraints are locking the pointer to a static
position, and confining the pointer to a given region.
Currently locking is fully implemented, and confining is implemented for
rectangular confinement regions.
What else is lacking is less troublesome semantics for enabling the lock
or confinement; currently the only requirement implemented is that the
window that appears focused is the one that may aquire the lock.
This means that a pointer could be 'stolen' by creating a new window that
receives active focus, or when using focus-follows-mouse, a pointer
passes a window that has requested a lock. This semantics can be changed
and the protocol itself allows any semantics as seems fit.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
In order to reuse some vector math for pointer confinement, move out
those parts to its own file, introducing the types old types
"MetaVector2" and "MetaLine2" outside of meta-barrier-native.c, as well
as introducing MetaBorder which is a line, with a blocking direction.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
Add support for sending relative pointer motion deltas to clients who
request such events by creating wp_relative_pointer objects via
wp_relative_pointer_manager.
This currently implements the unstable version 1 from wayland-protocols.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
Instancing a gbm device without initializing EGL with it means that it
won't be able to import wl_drm buffers. Instead, let's re-use cogl's
gbm device which is already properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=761557
This fixes an issue analogous to bug 760330 for the X11 backend,
except on this backend we wouldn't crash accessing free'd memory.
Instead we're leaking watches since we steal them from the hash table
which means that when they're removed in
_meta_idle_monitor_watch_fire() they're no longer there and thus
they're never free'd.
https://bugzilla.gnome.org/show_bug.cgi?id=760476
Right now the XSync based idle monitoring code, will fetch all active
watches into a list, and then call their watch callbacks one by one
as necessary. If one watch callback invalidates another watch, the
list will contain free'd memory.
This commit makes sure to consult the hash table after ever call
of a watch callback, to ensure mutter never looks at freed memory.
Fixes crash reported on IRC by Laine Stump with his synergy setup.
https://bugzilla.gnome.org/show_bug.cgi?id=760330
We can know the rotation modes supported by the driver, so
export these as our supported modes, and ensure these modes
are honored on the CRTC primary plane upon apply_configuration().
It is worth noting however that not all hardware will be
capable of supporting all rotation modes (in fact, most of
them won't). A driver independent solution should be in
place to back up the rotation modes unsupported by the
drivers, so this is still a partial solution.
The cursor renderer has also been changed to default to
software-based rendering anytime the cursor enters a
rotated CRTC. Another solution would be actually rotating
the DRM cursor planes, but then it requires applying rotation on
these per-CRTC, and actually transforming the pointer position by
the output matrix. This brings marginal gains, so we use the
"sw" rendered cursor, which will be transformed together with
the primary plane.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
GDesktopTouchpadScrollMethod was used instead of GDesktopTouchpadClickMethod
which became visible now that the former has been removed from
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
When the touchpad is two-finger scrolling capable, always enable it.
When the touchpad only supports edge scrolling (usually older devices, and
usually smaller devices), allow disabling the edge scrolling.
This requires a newer gsettings-desktop-schemas as the scroll-method key
was removed, and the edge-scroll-enabled key added.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
The max potential number of logical monitors (i.e. MetaMonitorInfos)
is the number of CRTCs, not the number of outputs.
In cases where we have more enabled CRTCs than connected outputs we
would end up appending more MetaMonitorInfos to the GArray than the
size it was initialized with which means the array would get
re-allocated rendering invalid some MetaCRTC->logical_monitor pointers
assigned previously and thus ending in crashes later on.
https://bugzilla.gnome.org/show_bug.cgi?id=751638
On the wire, Wayland specifies the refresh rate in milliHz. Mutter sends
the refresh rate in Hz, which confuses clients, e.g. weston-info:
interface: 'wl_output', version: 2, name: 4
mode:
width: 2560 px, height: 1440 px, refresh: 0 Hz,
flags: current preferred
interface: 'wl_output', version: 2, name: 5
mode:
width: 3200 px, height: 1800 px, refresh: 0 Hz,
flags: current preferred
and xrandr:
XWAYLAND0 connected 2560x1440+3200+0 600mm x 340mm
2560x1440@0.1Hz 0.05*+
XWAYLAND1 connected 3200x1800+0+0 290mm x 170mm
3200x1800@0.1Hz 0.03*+
Export the refresh rate in the correct units. For improved precision,
perform the KMS intermediate calculations in milliHz as well, and
account for interlaced/doublescan modes.
This is also consistent with what GTK+ expects:
timings->refresh_interval = 16667; /* default to 1/60th of a second */
/* We pick a random output out of the outputs that the window touches
* The rate here is in milli-hertz */
int refresh_rate = _gdk_wayland_screen_get_output_refresh_rate (wayland_display->screen,
impl->outputs->data);
if (refresh_rate != 0)
timings->refresh_interval = G_GINT64_CONSTANT(1000000000) / refresh_rate;
Where the 'refresh_rate' given is exactly what's come off the wire.
1000000000/60000 comes out as 16667, whereas divided by 60 is ...
substantially less.
https://bugzilla.gnome.org/show_bug.cgi?id=758653
On Odroid U2 (exynos4412) the drm device is not bound to pci.
Open the detection to platform device of the drm subsystem, exclusive of
control devices.
https://bugzilla.gnome.org/show_bug.cgi?id=754911
Failing to initialize Clutter isn't something it's useful to report
into automatic bug tracking systems or get a backtrace for - in fact,
the most common case is that DISPLAY is unset or points to a
non-existent X server. So simply exit rather than calling g_error().
https://bugzilla.gnome.org/show_bug.cgi?id=757311
g_error() is the wrong thing to do when, for example, we can't find the
DRM device, since Mutter should just fail to start rather than reporting
a bug into automatic bug tracking systems. Rather than trying to decipher
which errors are "expected" and which not, just make all failure paths
in meta_launcher_new() return a GError out to the caller - which we make
exit(1).
https://bugzilla.gnome.org/show_bug.cgi?id=757311
The qxl kms driver has a bug where the cursor gets hidden
implicitly after a drmModeSetCrtc call.
This commit works around the bug by forcing a drmModeSetCursor2
call after the drmModeSetCrtc calls.
This is pretty hacky and won't ever go upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=746078
Ubuntu ships a patch in the X server that makes the group switch
keybindings only work on key release, i.e. the X server internal group
locking happens on key release which means that mutter gets the
XKB_KEY_ISO_Next_Group key press event, does its XLockGroup() call
with a new index and then, on key release, the X server moves the
index further again.
We can work around this without affecting our behavior in unpatched X
servers by doing a XLockGroup() every time we're notified of the
locked group changing if it doesn't match what we requested.
https://bugzilla.gnome.org/show_bug.cgi?id=756543
We might get modes in XRROutputInfos that aren't in the
XRRScreenResources we get earlier. This always seems to be transient,
i.e. when it happens, the X server will usually send us a follow up
RRScreenChangeNotify where we then get a "stable" view of the world
again.
In any case, when these glitches happen, we end up with NULL pointers
in the MetaOutput->modes array which makes us crash later on. This
patch ensures that doesn't happen.
https://bugzilla.gnome.org/show_bug.cgi?id=756660
Calling queue_redraw() in _force_update() is not needed because
update_cursor() will do this when needed, i.e. when switching between
hardware cursor and texture cursor, or when drawing with texture cursor.
There is also no need to force _native_force_update() because
update_cursor() will cover this as well when needed. When not changing
cursor but only the gbm_bo, the "dirty" boolean on the gbm_bo will
trigger a redraw.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
This commits refactors cursor handling code and plugs in logic so that
cursor sprites changes appearance as it moves across the screen.
Renderers are adapted to handle the necessary functionality.
The logic for changing the cursor sprite appearance is done outside of
MetaCursorSprite, and actually where depends on what type of cursor it
is. In mutter we now have two types of cursors that may have their
appearance changed:
- Themed cursors (aka root cursors)
- wl_surface cursors
Themed cursors are created by MetaScreen and when created, when
applicable(*), it will extend the cursor via connecting to a signal
which is emitted everytime the cursor is moved. The signal handler will
calculate the expected scale given the monitor it is on and reload the
theme in a correct size when needed.
wl_surface cursors are created when a wl_surface is assigned the
"cursor" role, i.e. when a client calls wl_pointer.set_cursor. A
cursor role object is created which is connected to the cursor object
by the position signal, and will set a correct texture scale given what
monitor the cursor is on and what scale the wl_surface's active buffer
is in. It will also push new buffers to the same to the cursor object
when new ones are committed to the surface.
This commit also makes texture loading lazy, since the renderer doesn't
calculate a rectangle when the cursor position changes.
The native backend is refactored to be triple-buffered; see the comment
in meta-cursor-renderer-native.c for further explanations.
* when we are running as a Wayland compositor
https://bugzilla.gnome.org/show_bug.cgi?id=744932
Use a specialized cursor renderer when running as a nested Wayand
compositor. This new renderer sets an empty X11 cursor and draws the
cursor as part of the stage using the generic cursor renderer drawing
path.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
This fixes build error caused by commit 614d6bd. We can simply remove
the usage of meta-wayland.c functions in non-wayland build because
META_BACKEND_X11_MODE_NESTED is only used in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=753948
If the user Alt-Tabs out of the window, we will be left thinking
the Alt key is still pressed since we don't see a release for it.
Solve this and other related issues for the nested X11 compositor
by selecting for KeymapStateMask which causes a KeymapNotify event
to be sent after each FocusIn, and when we get these events, update
the internal XKB state and send any necessary modifiers events to
clients.
https://bugzilla.gnome.org/show_bug.cgi?id=753948
There were lots of code handling the native renderer specific cases;
move these parts to the renderer. Note that this causes the X11 case to
always generate the texture which is a waste of memory, but his
regression will be fixed in a following commit.
The lazy loading of the texture was removed because it was eventually
always loaded anyway indirectly by the renderer to calculate the
current rect.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
There is nothing special about the private API which only consists of
getters for renderer specific backing buffer. Lets them to the regular
.h file and treat them as part of the normal API.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
Before, it used to be in the screen, but now,
meta_cursor_reference_from_theme can never fail. Move it to where we
load the images from the cursor name.
Since mutter has two X connections and does damage handling on the
frontend while fence triggering is done on the backend, we have a race
between XDamageSubtract() and XSyncFenceTrigger() causing missed
redraws in the GL_EXT_X11_sync_object path.
If the fence trigger gets processed first by the server, any client
drawing that happens between that and the damage subtract being
processed and is completely contained in the last damage event box
that mutter got, won't be included in the current frame nor will it
cause a new damage event.
A simple fix for this would be XSync()ing on the frontend connection
after doing all the damage subtracts but that would add a round trip
on every frame again which defeats the asynchronous design of X
fences.
Instead, if we move fence handling to the frontend we automatically
get the right ordering between damage subtracts and fence triggers.
https://bugzilla.gnome.org/show_bug.cgi?id=728464
While we shouldn't normally receive crossing events for any windows
except the stage when running nested, we do in case we hold a pointer
grab - just ignore those events instead of taking down the user's
session.
If GL advertises this extension we'll use it to synchronize X with GL
rendering instead of relying on the XSync() behavior with open source
drivers.
Some driver bugs were uncovered while working on this so if we have
had to reboot the ring a few times, something is probably wrong and
we're likely to just make things worse by continuing to try. Let's
err on the side of caution, disable ourselves and fallback to the
XSync() path in the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=728464
Some monitors return a bunch of bytes on their display descriptor
which aren't valid utf8 and thus we fail to serialize them later on
for the DisplayConfig DBus API.
Let's fall back to the stringified product code and serial number in
that case.
https://bugzilla.gnome.org/show_bug.cgi?id=752673
There's a chance the icon will be animated, so store the XcursorImages
instead of the individual XcursorImage, and handle that as a nimages=1
special case.
API to "tick" a cursor animation, and retrieve current frame timing
information has been added.
https://bugzilla.gnome.org/show_bug.cgi?id=752342
Tracking back from the monitor to the output every time we need to
figure out the scale of a window on a monitor is inconvenient, so
propagate the scale from the output to the monitor it is associated
with.
https://bugzilla.gnome.org/show_bug.cgi?id=744934
Enable a user to test and debug multi output configurations on Wayland
without having the available hardware by enabling some basic
configuration of the dummy monitor manager.
Currently available configuration options are:
MUTTER_DEBUG_NUM_DUMMY_MONITORS - to set the number of monitors
MUTTER_DEBUG_DUMMY_MONITOR_SCALES - to configure the monitor scales
See src/backends/meta-monitor-manager-dummy.c for detailed description
of the available configuration parameters.
https://bugzilla.gnome.org/show_bug.cgi?id=747089
Before submitting a new scroll mode, click method or sendevents mode check if
the value is supported by the device. This avoids BadValue errors when setting
two-finger scrolling on single-finger touchpad devices since we can't easily
handle BadValue (see 9747277b)
https://bugzilla.gnome.org/show_bug.cgi?id=750816
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We should not be setting random output properties like this.
Use the function we just introduced to only set the underscan flag when
it's actually supported.
So that clients such as the control center can decide to hide an
underscanning checkbutton when the output does not support it.
Support in the KMS / native backend to come later...
It seems that fglrx sometimes gives us absolute junk when requesting the
outputs, and if we don't trap errors, we'll just crash when trying to
configure a junk output. Use xcb so errors simply get ignored.
For enter / leave events, which we use in the UI code, we need to make
sure that these coordinates are root-relative as well, otherwise the
cursor when entering frames might be incorrect.
If we're running as a nested compositor, we must not attempt to
passive grab on the root window, and we should be setting the
touch event mask on the stage window.
https://bugzilla.gnome.org/show_bug.cgi?id=751036
