That could happen if the backend did not provide presentation timestamps,
or if the screen was not changing other than the hardware cursor:
if (stage_cogl->last_presentation_time == 0||
stage_cogl->last_presentation_time < now - 150000)
{
stage_cogl->update_time = now;
return;
}
By setting `update_time` to `now`, master_clock_get_swap_wait_time()
returns 0:
gint64 now = g_source_get_time (master_clock->source);
if (min_update_time < now)
{
return 0;
}
else
{
gint64 delay_us = min_update_time - now;
return (delay_us + 999) / 1000;
}
However, zero is a value unsupported by the default master clock
due to:
if (swap_delay != 0)
return swap_delay;
All cases are now handled by extrapolating when the next presentation
time would be and calculating an appropriate update time to meet that.
We also need to add a check for `update_time == last_update_time`, which
is a situation that just became possible since we support old (or zero)
values of `last_presentation_time`. This avoids getting more than one
stage update per frame interval when input events arrive without
triggering a stage redraw (e.g. moving the hardware cursor).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
Instead of crazy refresh rates >1MHz falling back to 60Hz, just honour
them by rendering unthrottled (same as `sync_delay < 0`). Although I
wouldn't actually expect that path to ever be needed in reality, it just
ensures an infinite `while` loop never happens.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
Starting from commit 7713006f5, during X11 disposition we also unmanage the
windows using the xids hash table values list.
However, this is also populated by the X11 Meta barrier implementation and then
contains both Windows and Barriers.
So when going through the values list, check whether we're handling a window or
a barrier and based on that, unmanage or destroy it.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/624https://gitlab.gnome.org/GNOME/mutter/merge_requests/605
As per commit 7718e67f, destroying the compositor causes destroying window
actors and this leads to stack changes, but at this point the stack was already
disposed and cleared.
So, clear the stack when any component that could use it (compositor, and X11)
has already been destroyed.
As consequence, also the stamps should be destroyed at later point.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/623https://gitlab.gnome.org/GNOME/mutter/merge_requests/605
When using evdev (for Wayland), the backend receives all device events
and queue them for clutter.
Hook up the pointer accessibility handlers in clutter's main processing
queue, so that we get better accuracy for pointer location.
We need to avoid doing this on X11 though because X11 relies on the raw
events for this to work reliably, so the same is already done in the
X11 backend when using X11.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Pointer accessibility features requires to receive all pointer events
regardless of X11 grabs.
Add XI2 raw events mask and hook up the pointer accessibility handlers
to the raw motion and button press/release events.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Add support for click assist, namely simulated secondary click (on a
long primary button press) and hover click support (simulate a click when
the pointer remains static for some time).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Add the required signaling in place in clutter device manager to notify
the upper layers (namely, the shell) whenever a click assist delay or
gesture is started or stopped.
This will allow the shell to implement a visual feedback for click
assist operations.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Naming the keyboard accessibility settings `a11y_settings` wrongly
assumes there will never be any other type of accessibility settings.
Rename `a11y_settings` to `keyboard_a11y_settings` to avoid future
confusion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
For accessibility features, being either keyboard accessibility to
implement mousekeys, or pointer accessibility to implement simulated
secondary click or dwell click, we need to have a virtual device.
Add that virtual device in ClutterInputDevice so it can be used either
for keyboard or pointer accessibility.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
To emulate X11 grabs, mutter as a Wayland compositor would disable its
own keyboard shortcuts and when the X11 window is an override redirect
window (which never receives focus), it also forces keyboard focus onto
that X11 O-R window so that all keyboard events are routed to the
window, just like an X11 server would.
But that's a bit of a “all-or-nothing” approach which prevents
applications that would legitimately grab the keyboard under X11 (like
virtual machine viewers) to work by default.
Change “xwayland-allow-grabs” to control whether the keyboard focus
should be locked onto override redirect windows in case of an X11 grab.
For stringent needs, careful users can still use the blacklisting
feature (i.e. a list containing “!*”) to prevent grabs from any X11
applications to affect other Wayland native applications.
https://gitlab.gnome.org/GNOME/mutter/issues/597
Certain arguments like `-fno-omit-frame-pointer` break GIR creation.
Lets handle this like we do for the rest of mutter and duplicate the
relevant arguments from `clutter_c_args`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/601
MetaProfiler is not built when -Dprofiler=false, and that
breaks the build since MetaBackend unconditionally imports
and uses it.
Fix that by wrapping MetaProfiler in compile-time checks.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/603
Spotted while adding tracing to swap buffers, we only enter
the first part of the if condition when use_clipped_redraw
is TRUE, so it's pretty safe to assume it's TRUE.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
The idea here is to be able to visualize and immediately
understand what is happening. Something like:
```
[ view1 ] [ view2 ]
[---- Layout ---][------ Paint ------][ Pick ]
[================== Update =====================]
```
But with colors. A few of the previous profiling data
sections were removed, since they didn't really add to
reading the graph.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add the ability to add tracing instrumentation to the code. When
enabled, trace entries will generate a file with timing information
that will be processable by sysprof for generating visualization of
traces over time.
While enabled by default at compile time, it is possible to disable the
expansion of the macros completely by passing --disable-tracing to
./configure.
Tracing is so far only actually done if actually enabled on explicitly
specified threads.
This will be used by Mutter passing the write end of a pipe, where the
read end is sent to Sysprof itself via the D-Bus method 'Capture()'.
By passing that, we have to detect EPIPE that is sent when Sysprof stops
recording. Fortunately, we already ignore the signal at meta_init(), so
no need to add a custom signal handler.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Having a cursor role with a NULL renderer is valid state, and even desirable
on tablets (eg. after proximity out). In those cases it should be
interpreted as the cursor surface not being over any output.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/545
We're currently emitting the 'grab-op-end' signal when the grab prerequisites
are met, but when display->grab_op is still set to a not-NONE value and thus
meta_display_get_grab_op() would return that in the signal callback.
And more importantly when this is emitted, devices are still grabbed.
Instead, emit this signal as soon as we've unset all the grab properties and
released the devices.
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/1326https://gitlab.gnome.org/GNOME/mutter/merge_requests/596
We're currently emitting the 'grab-op-end' signal when the grab prerequisites
are met, but when display->grab_op is still set to a not-NONE value and thus
meta_display_get_grab_op() would return that in the signal callback.
And more importantly when this is emitted, devices are still grabbed.
Instead, emit this signal as soon as we've unset all the grab properties and
released the devices.
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/1326https://gitlab.gnome.org/GNOME/mutter/merge_requests/596
We handle this in backend specific code for x11, so do the wayland
bits here. We can only honor this on applications that request focus
on a surface after a startup request, as we do need an explicit
surface to apply the workspace on (and we don't have additional clues
like WMCLASS on X11). Notably, gtk_shell1.notify_startup doesn't suffice.
Another gotcha is that the .request_focus happens when the surface is
already "mapped". Due to the way x11 and the GDK api currently work (first
reply on the startup id, then map a window, then request focus on that
window). This means the surface will ignore at this point
window->initial_workspace, so it must be actively changed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/544
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/674
On a successful DnD operation we may expect the wl_data_source and
wl_data_offer to live long enough to finish the data transfer, despite the
grab operation (and other supporting data) being gone.
When that happens, the compositor expects a wl_data_offer.finish request to
notify that it finished. However the client may still chose not to send that
and destroy the wl_data_offer instead, resulting in the MetaSelectionSource
owner for the DnD selection not being unset.
When that happens, the DnD MetaSelectionSource still exists but it's
detached from any grab operation, so will not be unset if eg. the drag
source client destroys the wl_data_source. This may result in crashes when
the next drag operation tries to replace the owner DnD MetaSelectionSource.
Check explicitly for this case, in order to ensure the DnD owner is unset
after such operations.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/591
Add debug flags based on meson's `debug` option instead of `buildtype`.
This allows custom build configurations to behave like a debug or release build.
Add `-fno-omit-frame-pointer` to Mutter/Cogl. Not to Clutter though, as that would
require more changes to how Clutter's gir is created
Remove `-DG_DISABLE_CAST_CHECKS` from Clutter in debug builds
Add `-DG_DISABLE_CHECKS`, `-DG_DISABLE_ASSERT` and `-DG_DISABLE_CAST_CHECKS` to all
non-debug builds but `plain`, which explicitly should not have any compile flags
Use `cc.get_supported_arguments`, so it becomes more obvious to the user which flags
are set during compilation
https://gitlab.gnome.org/GNOME/mutter/merge_requests/497
Extract the next buffer -logic into a new function. This allows to
simplify copy_shared_framebuffer_cpu () making it more readable.
This change is a pure refactoring, no functional changes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/593
Since commit 956ab4bd made libcanberra mandatory, we never use
the system bell for handling the `audible-bell` setting. So
instead of reacting to settings changes with the exact same call
to XkbChangeEnabledControls(), just call it once when initializing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/598
