Support changing the mouse and trackball acceleration profile. This
makes it possible to for example disable pointer acceleration by
choosing the 'flat' profile.
This adds an optional dependency on gudev. Gudev is used by the X11
backend to detect whether a device is a mouse or not. Without gudev
support, the accel profile settings has have effect for mouse devices.
Trackball still uses the "strstr" approach, since udev doesn't support
tagging devices as trackball devices yet.
https://bugzilla.gnome.org/show_bug.cgi?id=769179
Add support for setting edge-scrolling separately from two-finger
scrolling. We now have 2 separate boolean settings for those, with the
Mouse panel in gnome-control-center allowing to set only one of those at
a time, but nothing precludes both being set in the configuration.
We need to handle:
- two-finger-scrolling-enabled and edge-scrolling-enabled settings both
being set.
- those 2 settings being change out-of-order
- two-finger-scrolling being set on a device that doesn't support it
- edge-scrolling-enabled on a device that doesn't support it
And the combinations of one touchpad supporting just one of edge
scrolling and two-finger scrolling and another vice-versa.
https://bugzilla.gnome.org/show_bug.cgi?id=768245
Instead of continuing eventually crashing with a segmentation fault due
to a missing renderer, make MetaBackend an GInitable, and gracefully
handle the failure to fully create the backend with an EXIT_FAILURE.
https://bugzilla.gnome.org/show_bug.cgi?id=769036
It does nothing at the moment, but can be hooked into MetaWaylandTabletPad
now. For X11, we need to trigger these for the pad events we receive from
the passive pad button grabs.
This function will be useful for the wayland implementation, because buttons
are mapped at the time of sending those through the wire.
As x11/wayland implementations differ here, this function will be useful for
the wayland implementation, as the action is handled lat
Some settings make no sense on external tablets, and others make
no sense in display/system-integrated tablets. Perform those checks
so we don't end up with possibly broken configuration.
Given that information defines largely how such devices are to be
configured, it makes sense to have that information at hand. A getter
has been also added for the places where it could be useful, although
it will require HAVE_LIBWACOM checks in callers too.
They are already effectively interchangeable so this should reduce
pointless casts.
Just like in GDK though, we need to keep the old definition for
instrospection to be able to include the struct's fields.
By creating a pending gbm/EGL surface pair, only setting it on
swap-buffers, we would draw onto a buffer on the old surface, then swap
the buffer from the new surface, causing the first frame after a
hot-plug always having no content.
This was in the past not very noticable since some non-deterministic but
frequent side effect in gnome-shell caused hot-plugging to always render
two new frames, but after "Introduce regional stage rendering", this
side effect did not occur as often, thus making it more visible.
This commit updates the current gbm/EGL surface pair before painting a
frame, so that when the frame is painted, the surface with the correct
size is used and the buffer from correct surface is swapped.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Being a listener to a signal, it is inconvenient to enforce order of
execution between different signal listeners. If there are things in
the backend that should be updated before various other signal
handlers, make sure so is done by emitting the signal after having
explicitly notified the backend.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
CoglFrameInfo is a frame info container associated with a single
onscreen framebuffer. The clutter stage will eventually support drawing
a stage frame with multiple onscreen framebuffers, thus needs its own
frame info container.
This patch introduces a new stage signal 'presented' and a accompaning
ClutterFrameInfo and adapts the stage windows and past onscreen frame
callbacks users to use the signal and new info container.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Call a CoglContext "cogl_context", CoglDisplay "cogl_display" and
CoglRenderer "cogl_renderer" so that they won't be confused with
ClutterContext, MetaDisplay and MetaRenderer etc.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Make the cogl vfunc functions have names that are globally
discoverable. Calling the same function in every backend the same name
causes code navigation tools to not function properly. Rename the
affected functions to closer correspond to the style mutter uses.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Add support for drawing a stage using multiple framebuffers each making
up one part of the stage. This works by the stage backend
(ClutterStageWindow) providing a list of views which will be for
splitting up the stage in different regions.
A view layout, for now, is a set of rectangles. The stage window (i.e.
stage "backend" will use this information when drawing a frame, using
one framebuffer for each view. The scene graph is adapted to explictly
take a view when painting the stage. It will use this view, its
assigned framebuffer and layout to offset and clip the drawing
accordingly.
This effectively removes any notion of "stage framebuffer", since each
stage now may consist of multiple framebuffers. Therefore, API
involving this has been deprecated and made no-ops; namely
clutter_stage_ensure_context(). Callers are now assumed to either
always use a framebuffer reference explicitly, or push/pop the
framebuffer of a given view where the code has not yet changed to use
the explicit-buffer-using cogl API.
Currently only the nested X11 backend supports this mode fully, and the
per view framebuffers are all offscreen. Upon frame completion, it'll
blit each view's framebuffer onto the onscreen framebuffer before
swapping.
Other backends (X11 CM and native/KMS) are adapted to manage a
full-stage view. The X11 CM backend will continue to use this method,
while the native/KMS backend will be adopted to use multiple view
drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
In preperation for having allowing drawing onto multiple onscreen
framebuffers, move the onscreen framebuffer handling to the
corresponding winsys dependent backends.
Currently the onscreen framebuffer is still accessed, but, as can seen
by the usage of "legacy" in the accessor name, it should be considered
the legacy method. Eventually only the X11 Compositing Manager backend
will make use of the legacy single onscreen framebuffer API.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Split the stage window implementations into three separate objects: one
for X11 as a compositing manager, one for X11 running as a nested
Wayland compositor, and one for running with the native backend.
The new stage window implementations are only thin shells; this is in
preparation for making the stage windows behave more differently.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
The stage resizing was placed in the generic backend, which was only
run on certain configurations (when running nested or using the native
backend). This commits makes the resizing more explicit thus more
obvious.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
This commit completes the move of monitor logic to the monitor
mangager. The renderer now only deals with framebuffers, asking the
monitor manager to do the crtc flip tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Let MetaMonitorManagerKms manage KMS modes. This lets us pass less
state to MetaRendererNative. Instead let MetaMonitorManager tell the
monitor manager when it should set the mode and with what framebuffer.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Absorb the CoglRendererKMS struct into MetaRendererNative. The gbm
device initialization is moved earlier so that the renderer fails to
initialize if the gbm device creation failed.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Move the KMS interaction from cogl into mutter, where most of the other
KMS interaction already takes place. This also removes dead code which
were only excercised when non-mutter callers used the cogl KMS backend.
The cogl KMS API was updated to pass via MetaRendererNative instead of
via the different cogl objects.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Instead of passing around the KMS file descriptor via clutter to cogl,
just make our own clutter backend create the cogl renderer and set the
KSM fd.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
MetaRenderer is meant to be the object responsible for rendering the
scene graph. It will contain the logic related to the cogl winsys
backend, the clutter backend, and the clutter stage window.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Use the correct pointer types for cogl objects. This avoids warnings
when including the cogl headers doesn't result in all the cogl types
being typedefs to void.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Introduce two new clutter backends: MetaClutterBackendX11 and
MetaClutterBackendNative. They are so far only wrap ClutterBackendX11
and ClutterBackendEglNative respectively, but the aim is to move things
from the original clutter backends when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Emit a signal so that interested parties can recreate their FBOs and
queue a full scene graph redraw to ensure we don't end up showing
graphical artifacts.
This relies on the GL driver supporting the
NV_robustness_video_memory_purge extension and cogl creating a
suitable GL context. For now we only make use of it with the X backend
since the only driver with which this is useful is NVIDIA.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
All the upper layers are prepared for multiple onscreen cursors, but
this. All MetaCursorRenderers created would poke the same internal
MetaOverlay in the stage.
This will lead to multiple cursor renderers resorting to the "SW"
rendering paths (as it can be seen with tablet support) to reuse the
same overlay, thus leading to flickering when a different
MetaCursorRenderer takes over the overlay.
Fix this by allowing per-cursor-renderer overlays, their lifetime
is attached to the cursor renderer, so is expected to be tear down
if the relevant device (eg. tablet) disappears.
Sadly, GLib's autoptr cleanup macros cannot be detected by the C
pre-processor, because they generate a function. This means that we are
forced to bump up the dependency on GLib 2.49, in order to build against
a newer version of gdbus-codegen.
Starting from GLib 2.49, the gdbus-codegen tool automatically generates
the auto cleanup symbols for the GDBus proxy and skeleton interfaces.
Since we don't depend on a specific version of GLib we need to
conditionally generate the auto cleanup symbols in case an older version
of gdbus-codegen is used when building Mutter.
This commit unbreaks the build under GNOME Continuous, which has been
failing with:
usr/include/glib-2.0/glib/gmacros.h:415:43: error: redefinition of 'glib_autoptr_cleanup_Login1Session'
#define _GLIB_AUTOPTR_FUNC_NAME(TypeName) glib_autoptr_cleanup_##TypeName
^
[...]
/usr/include/glib-2.0/glib/gmacros.h:415:43: note: previous definition of 'glib_autoptr_cleanup_Login1Session' was here
./meta-dbus-login1.h:82:1: note: in expansion of macro 'G_DEFINE_AUTOPTR_CLEANUP_FUNC'
G_DEFINE_AUTOPTR_CLEANUP_FUNC (Login1Session, g_object_unref)
^
Wrap the existing laptop_display_is_on() method in a public function
that gnome-shell can use to query whether a builtin output is present
and enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=765267
While CoglError is a define to GError, it doesn't follow the convention
of ignoring errors when NULL is passed, but rather treats the error as
fatal :-(
That's clearly unwanted for a compositor, so make sure to always pass
an error parameter where a runtime error is possible (i.e. any CoglError
that is not a malformed blend string).
https://bugzilla.gnome.org/show_bug.cgi?id=765058
The previous configuration might not apply because the number of
enabled outputs when trying to apply it might have changed. This isn't
a bug so we shouldn't assert. Instead, we can handle it by falling
back as we would if we didn't have a previous configuration to start
with.
https://bugzilla.gnome.org/show_bug.cgi?id=764286
On the X11 backend we don't track the pointer position in
priv->current_x/y which remain set to zero. That means we never set
the clutter stage cursor if point 0,0 isn't covered by any monitor
since we return early.
Commit 4bebc5e5fa introduced this to
avoid crashing on the prepare-at handlers when the cursor position
doesn't fall inside any monitor area but we can handle that higher up
in the stack. In that case, the sprite's scale doesn't matter since
the cursor won't be shown anyway so we can skip setting it.
https://bugzilla.gnome.org/show_bug.cgi?id=763159
It indirectly triggers expensive operations in gnome-shell
(js/ui/keyboard.js), which turns out too expensive if we happen to operate
the shell simultaneously with 2 devices that will trigger the operations
there.
So just rate limit the signal emission, defer to an idle and just emit
the last device gotten. Worst that will happen is that we may possibly
emit the signal on the same device consecutively.
https://bugzilla.gnome.org/show_bug.cgi?id=753527
If we rely on getting back an input event with the warped pointer
coordinates, we might draw a frame with the old coordinates if we warp
during the paint phase. Avoid that by moving the cursor immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
The wp_pointer_constraints protocol is a protocol which enables clients
to manipulate the behavior of the pointer cursor associated with a seat.
Currently available constraints are locking the pointer to a static
position, and confining the pointer to a given region.
Currently locking is fully implemented, and confining is implemented for
rectangular confinement regions.
What else is lacking is less troublesome semantics for enabling the lock
or confinement; currently the only requirement implemented is that the
window that appears focused is the one that may aquire the lock.
This means that a pointer could be 'stolen' by creating a new window that
receives active focus, or when using focus-follows-mouse, a pointer
passes a window that has requested a lock. This semantics can be changed
and the protocol itself allows any semantics as seems fit.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
In order to reuse some vector math for pointer confinement, move out
those parts to its own file, introducing the types old types
"MetaVector2" and "MetaLine2" outside of meta-barrier-native.c, as well
as introducing MetaBorder which is a line, with a blocking direction.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
Add support for sending relative pointer motion deltas to clients who
request such events by creating wp_relative_pointer objects via
wp_relative_pointer_manager.
This currently implements the unstable version 1 from wayland-protocols.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
Instancing a gbm device without initializing EGL with it means that it
won't be able to import wl_drm buffers. Instead, let's re-use cogl's
gbm device which is already properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=761557
This fixes an issue analogous to bug 760330 for the X11 backend,
except on this backend we wouldn't crash accessing free'd memory.
Instead we're leaking watches since we steal them from the hash table
which means that when they're removed in
_meta_idle_monitor_watch_fire() they're no longer there and thus
they're never free'd.
https://bugzilla.gnome.org/show_bug.cgi?id=760476
Right now the XSync based idle monitoring code, will fetch all active
watches into a list, and then call their watch callbacks one by one
as necessary. If one watch callback invalidates another watch, the
list will contain free'd memory.
This commit makes sure to consult the hash table after ever call
of a watch callback, to ensure mutter never looks at freed memory.
Fixes crash reported on IRC by Laine Stump with his synergy setup.
https://bugzilla.gnome.org/show_bug.cgi?id=760330
We can know the rotation modes supported by the driver, so
export these as our supported modes, and ensure these modes
are honored on the CRTC primary plane upon apply_configuration().
It is worth noting however that not all hardware will be
capable of supporting all rotation modes (in fact, most of
them won't). A driver independent solution should be in
place to back up the rotation modes unsupported by the
drivers, so this is still a partial solution.
The cursor renderer has also been changed to default to
software-based rendering anytime the cursor enters a
rotated CRTC. Another solution would be actually rotating
the DRM cursor planes, but then it requires applying rotation on
these per-CRTC, and actually transforming the pointer position by
the output matrix. This brings marginal gains, so we use the
"sw" rendered cursor, which will be transformed together with
the primary plane.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
GDesktopTouchpadScrollMethod was used instead of GDesktopTouchpadClickMethod
which became visible now that the former has been removed from
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
When the touchpad is two-finger scrolling capable, always enable it.
When the touchpad only supports edge scrolling (usually older devices, and
usually smaller devices), allow disabling the edge scrolling.
This requires a newer gsettings-desktop-schemas as the scroll-method key
was removed, and the edge-scroll-enabled key added.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
The max potential number of logical monitors (i.e. MetaMonitorInfos)
is the number of CRTCs, not the number of outputs.
In cases where we have more enabled CRTCs than connected outputs we
would end up appending more MetaMonitorInfos to the GArray than the
size it was initialized with which means the array would get
re-allocated rendering invalid some MetaCRTC->logical_monitor pointers
assigned previously and thus ending in crashes later on.
https://bugzilla.gnome.org/show_bug.cgi?id=751638
On the wire, Wayland specifies the refresh rate in milliHz. Mutter sends
the refresh rate in Hz, which confuses clients, e.g. weston-info:
interface: 'wl_output', version: 2, name: 4
mode:
width: 2560 px, height: 1440 px, refresh: 0 Hz,
flags: current preferred
interface: 'wl_output', version: 2, name: 5
mode:
width: 3200 px, height: 1800 px, refresh: 0 Hz,
flags: current preferred
and xrandr:
XWAYLAND0 connected 2560x1440+3200+0 600mm x 340mm
2560x1440@0.1Hz 0.05*+
XWAYLAND1 connected 3200x1800+0+0 290mm x 170mm
3200x1800@0.1Hz 0.03*+
Export the refresh rate in the correct units. For improved precision,
perform the KMS intermediate calculations in milliHz as well, and
account for interlaced/doublescan modes.
This is also consistent with what GTK+ expects:
timings->refresh_interval = 16667; /* default to 1/60th of a second */
/* We pick a random output out of the outputs that the window touches
* The rate here is in milli-hertz */
int refresh_rate = _gdk_wayland_screen_get_output_refresh_rate (wayland_display->screen,
impl->outputs->data);
if (refresh_rate != 0)
timings->refresh_interval = G_GINT64_CONSTANT(1000000000) / refresh_rate;
Where the 'refresh_rate' given is exactly what's come off the wire.
1000000000/60000 comes out as 16667, whereas divided by 60 is ...
substantially less.
https://bugzilla.gnome.org/show_bug.cgi?id=758653
On Odroid U2 (exynos4412) the drm device is not bound to pci.
Open the detection to platform device of the drm subsystem, exclusive of
control devices.
https://bugzilla.gnome.org/show_bug.cgi?id=754911
Failing to initialize Clutter isn't something it's useful to report
into automatic bug tracking systems or get a backtrace for - in fact,
the most common case is that DISPLAY is unset or points to a
non-existent X server. So simply exit rather than calling g_error().
https://bugzilla.gnome.org/show_bug.cgi?id=757311
g_error() is the wrong thing to do when, for example, we can't find the
DRM device, since Mutter should just fail to start rather than reporting
a bug into automatic bug tracking systems. Rather than trying to decipher
which errors are "expected" and which not, just make all failure paths
in meta_launcher_new() return a GError out to the caller - which we make
exit(1).
https://bugzilla.gnome.org/show_bug.cgi?id=757311
The qxl kms driver has a bug where the cursor gets hidden
implicitly after a drmModeSetCrtc call.
This commit works around the bug by forcing a drmModeSetCursor2
call after the drmModeSetCrtc calls.
This is pretty hacky and won't ever go upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=746078
Ubuntu ships a patch in the X server that makes the group switch
keybindings only work on key release, i.e. the X server internal group
locking happens on key release which means that mutter gets the
XKB_KEY_ISO_Next_Group key press event, does its XLockGroup() call
with a new index and then, on key release, the X server moves the
index further again.
We can work around this without affecting our behavior in unpatched X
servers by doing a XLockGroup() every time we're notified of the
locked group changing if it doesn't match what we requested.
https://bugzilla.gnome.org/show_bug.cgi?id=756543
We might get modes in XRROutputInfos that aren't in the
XRRScreenResources we get earlier. This always seems to be transient,
i.e. when it happens, the X server will usually send us a follow up
RRScreenChangeNotify where we then get a "stable" view of the world
again.
In any case, when these glitches happen, we end up with NULL pointers
in the MetaOutput->modes array which makes us crash later on. This
patch ensures that doesn't happen.
https://bugzilla.gnome.org/show_bug.cgi?id=756660
Calling queue_redraw() in _force_update() is not needed because
update_cursor() will do this when needed, i.e. when switching between
hardware cursor and texture cursor, or when drawing with texture cursor.
There is also no need to force _native_force_update() because
update_cursor() will cover this as well when needed. When not changing
cursor but only the gbm_bo, the "dirty" boolean on the gbm_bo will
trigger a redraw.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
This commits refactors cursor handling code and plugs in logic so that
cursor sprites changes appearance as it moves across the screen.
Renderers are adapted to handle the necessary functionality.
The logic for changing the cursor sprite appearance is done outside of
MetaCursorSprite, and actually where depends on what type of cursor it
is. In mutter we now have two types of cursors that may have their
appearance changed:
- Themed cursors (aka root cursors)
- wl_surface cursors
Themed cursors are created by MetaScreen and when created, when
applicable(*), it will extend the cursor via connecting to a signal
which is emitted everytime the cursor is moved. The signal handler will
calculate the expected scale given the monitor it is on and reload the
theme in a correct size when needed.
wl_surface cursors are created when a wl_surface is assigned the
"cursor" role, i.e. when a client calls wl_pointer.set_cursor. A
cursor role object is created which is connected to the cursor object
by the position signal, and will set a correct texture scale given what
monitor the cursor is on and what scale the wl_surface's active buffer
is in. It will also push new buffers to the same to the cursor object
when new ones are committed to the surface.
This commit also makes texture loading lazy, since the renderer doesn't
calculate a rectangle when the cursor position changes.
The native backend is refactored to be triple-buffered; see the comment
in meta-cursor-renderer-native.c for further explanations.
* when we are running as a Wayland compositor
https://bugzilla.gnome.org/show_bug.cgi?id=744932
Use a specialized cursor renderer when running as a nested Wayand
compositor. This new renderer sets an empty X11 cursor and draws the
cursor as part of the stage using the generic cursor renderer drawing
path.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
This fixes build error caused by commit 614d6bd. We can simply remove
the usage of meta-wayland.c functions in non-wayland build because
META_BACKEND_X11_MODE_NESTED is only used in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=753948
If the user Alt-Tabs out of the window, we will be left thinking
the Alt key is still pressed since we don't see a release for it.
Solve this and other related issues for the nested X11 compositor
by selecting for KeymapStateMask which causes a KeymapNotify event
to be sent after each FocusIn, and when we get these events, update
the internal XKB state and send any necessary modifiers events to
clients.
https://bugzilla.gnome.org/show_bug.cgi?id=753948
There were lots of code handling the native renderer specific cases;
move these parts to the renderer. Note that this causes the X11 case to
always generate the texture which is a waste of memory, but his
regression will be fixed in a following commit.
The lazy loading of the texture was removed because it was eventually
always loaded anyway indirectly by the renderer to calculate the
current rect.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
There is nothing special about the private API which only consists of
getters for renderer specific backing buffer. Lets them to the regular
.h file and treat them as part of the normal API.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
Before, it used to be in the screen, but now,
meta_cursor_reference_from_theme can never fail. Move it to where we
load the images from the cursor name.
Since mutter has two X connections and does damage handling on the
frontend while fence triggering is done on the backend, we have a race
between XDamageSubtract() and XSyncFenceTrigger() causing missed
redraws in the GL_EXT_X11_sync_object path.
If the fence trigger gets processed first by the server, any client
drawing that happens between that and the damage subtract being
processed and is completely contained in the last damage event box
that mutter got, won't be included in the current frame nor will it
cause a new damage event.
A simple fix for this would be XSync()ing on the frontend connection
after doing all the damage subtracts but that would add a round trip
on every frame again which defeats the asynchronous design of X
fences.
Instead, if we move fence handling to the frontend we automatically
get the right ordering between damage subtracts and fence triggers.
https://bugzilla.gnome.org/show_bug.cgi?id=728464
While we shouldn't normally receive crossing events for any windows
except the stage when running nested, we do in case we hold a pointer
grab - just ignore those events instead of taking down the user's
session.
If GL advertises this extension we'll use it to synchronize X with GL
rendering instead of relying on the XSync() behavior with open source
drivers.
Some driver bugs were uncovered while working on this so if we have
had to reboot the ring a few times, something is probably wrong and
we're likely to just make things worse by continuing to try. Let's
err on the side of caution, disable ourselves and fallback to the
XSync() path in the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=728464
Some monitors return a bunch of bytes on their display descriptor
which aren't valid utf8 and thus we fail to serialize them later on
for the DisplayConfig DBus API.
Let's fall back to the stringified product code and serial number in
that case.
https://bugzilla.gnome.org/show_bug.cgi?id=752673
There's a chance the icon will be animated, so store the XcursorImages
instead of the individual XcursorImage, and handle that as a nimages=1
special case.
API to "tick" a cursor animation, and retrieve current frame timing
information has been added.
https://bugzilla.gnome.org/show_bug.cgi?id=752342
Tracking back from the monitor to the output every time we need to
figure out the scale of a window on a monitor is inconvenient, so
propagate the scale from the output to the monitor it is associated
with.
https://bugzilla.gnome.org/show_bug.cgi?id=744934
Enable a user to test and debug multi output configurations on Wayland
without having the available hardware by enabling some basic
configuration of the dummy monitor manager.
Currently available configuration options are:
MUTTER_DEBUG_NUM_DUMMY_MONITORS - to set the number of monitors
MUTTER_DEBUG_DUMMY_MONITOR_SCALES - to configure the monitor scales
See src/backends/meta-monitor-manager-dummy.c for detailed description
of the available configuration parameters.
https://bugzilla.gnome.org/show_bug.cgi?id=747089
Before submitting a new scroll mode, click method or sendevents mode check if
the value is supported by the device. This avoids BadValue errors when setting
two-finger scrolling on single-finger touchpad devices since we can't easily
handle BadValue (see 9747277b)
https://bugzilla.gnome.org/show_bug.cgi?id=750816
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We should not be setting random output properties like this.
Use the function we just introduced to only set the underscan flag when
it's actually supported.
So that clients such as the control center can decide to hide an
underscanning checkbutton when the output does not support it.
Support in the KMS / native backend to come later...
It seems that fglrx sometimes gives us absolute junk when requesting the
outputs, and if we don't trap errors, we'll just crash when trying to
configure a junk output. Use xcb so errors simply get ignored.
For enter / leave events, which we use in the UI code, we need to make
sure that these coordinates are root-relative as well, otherwise the
cursor when entering frames might be incorrect.
If we're running as a nested compositor, we must not attempt to
passive grab on the root window, and we should be setting the
touch event mask on the stage window.
https://bugzilla.gnome.org/show_bug.cgi?id=751036
This way, we won't be hit with BadValue errors if we set it to a value
outside the X device's range. This can happen for touchpads without
two-finger scrolling, for instance.
Instead of selecting the first drm mode as the preferred mode, select the
first drm mode marked as preferred. If there are no modes marked as
preferred, revert to the old behaviour and select the first mode.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
https://bugzilla.gnome.org/show_bug.cgi?id=750363
Read the drm layout properties suggested_X, suggested_Y and
hotplug_mode_update and transfer them to the meta layer.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
https://bugzilla.gnome.org/show_bug.cgi?id=750363
The monitors info structure is created from the tiled outputs
and this is used as the central storage for info about a monitor
as opposed to the output state.
It appears at least the EDID mm w/h is for the whole monitor and
not per tile.
this just adds backend support for retrieving the tile
information from X11 (randr 1.5) and native backends.
It stores the tiling information into the output struct.
This makes gnome-settings-daemon turn on the backlight and
gnome-shell's screen shield animate.
Note that on X sessions, gnome-settings-daemon uses the same upower
property to force an innocuous key event into the X server so that the
idle time gets reset since Xorg doesn't do this itself on lid events.
https://bugzilla.gnome.org/show_bug.cgi?id=749076
We'll need to get the value of some properties. Fail if the number of
items returned is less than we expect and warn if it exceeds it so
that we can easily find out if items are added to a property later and
fix it.
Some DRM drivers have added a consistent set of properties that
allow compensating for the overscan that some TVs do, without the
user being able to disable.
There is copy&pasted code in set_scroll_button, which is apparently
wrong, because it is trying to set scroll method instead of the scroll
button...
https://bugzilla.gnome.org/show_bug.cgi?id=747967
Since 8769b3d55, the checks performed on which update_* function was
called for each device got quite more lax, leading to failed asserts
on code that assumed the previous behavior.
Change update_[mouse|touchpad|trackball]_* to bail out early if the
device received has not the right type, and remove the asserts.
https://bugzilla.gnome.org/show_bug.cgi?id=747886
This seems nicer/tidier than the current X11 (center on the span of all
monitors) or native (so close to the activities corner it's hard not
to trigger it) platform behaviors.
This code also takes over the native-specific pointer warping that
happens when the pointer was over a removed output.
https://bugzilla.gnome.org/show_bug.cgi?id=746896
This function returns the monitor_info index corresponding to the given
coordinates, or -1 if none is found at that point. The native backend
has been changed in places where it could make use of this function.
https://bugzilla.gnome.org/show_bug.cgi?id=746896
clutter currently never emits activated or deactivated signals on
the stage object when using the EGL backend. Since the stage never
gets activated, accessibility tools, like orca, don't work.
This commit makes mutter take on the responsibility, by tracking
when the stage gains/loses focus, and then synthesizing stage
CLUTTER_STAGE_STATE_ACTIVATED state events.
A limitation of this approach is that clutter's own notion of
the stage activeness won't reflect mutter's notion of the
stage activeness. This isn't a problem, in practice, and can
be addressed in the medium-term after making changes to
clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=746670
The enums are swapped currently, because for edge scroll is enabled two finger
scroll and similary for two finger scroll is enabled edge scroll, what is
apparently wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=746870
On startup, the cursor is kept hidden if there's any touchscreen available.
If the device that was last interacted is removed, we check on available
pointing devices though, so we don't possibly hide the pointer if there are
further mice/touchpads/etc.
Devices being added don't update cursor visibility, we wait for the user
interacting with those instead.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
On X11, calling this function on meta_display_handle_events() will not catch
mouse events happening over clients, so poke directly in the backend for
XI_DeviceChanged events, which mutter will get on device switches.
The code has been slightly refactored so we deal with XIEvents at a single
handle_input_event() function.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
This function can be used to trigger changes depending on the device type
that is currently emitting the events. So far, it is used to switch cursor
visibility on/off on touchscreen interaction.
A "last-device-updated" signal has also been added, in order allow hooking
other behavior changes (eg. OSK) when the last device changes.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
The initial pointer position is set by clutter. At the moment it
is the point 16x16 on the screen. But this point is not always
in the visible area on monitors (the monotors can be arranged in
many different ways).
https://bugzilla.gnome.org/show_bug.cgi?id=745752
Otherwise the pointer might be "lost" outside the visible area. Note
that the constraining code only ensures the pointer doesn't leave the
visible area but if the pointer is already outside because the rug was
pulled under it then it doesn't do anything.
https://bugzilla.gnome.org/show_bug.cgi?id=745121
DRM objects like connectors and encoders might change at any time, in
particular they might become invalid between drmModeGetResources() and
getting the actual objects in which case they'll be NULL. Be defensive
against that.
Note that, if this happens, we should get another udev event soon
which will cause us to update our state.
https://bugzilla.gnome.org/show_bug.cgi?id=745476
To make the nested compositor mode work again after "backends/native:
Calculate the output scale in here", set the scale when creating the
dummy output.
https://bugzilla.gnome.org/show_bug.cgi?id=745401
This just exposes the type and the singleton getter necessary to make
it available to introspection. We'll expose more functionality as it
becomes needed.
https://bugzilla.gnome.org/show_bug.cgi?id=743745
When running as a dispay server pointer barriers are a server side
feature and requires no client interaction of any sort. This patch
implements pointer barriers that can be used when running as a display
server on the native backend. Running as a display server using the X11
backend is currently not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=706655
For each device that can be mapped (touchscreens, tablets), the output
will be fetched from settings and matched with the currently connected
ones. If a match is found, the device matrix will be found out from the
output configuration and set on the device.
This is also updated both individually for newly connected devices, and
collectively on output configuration changes.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This goes through modifying XI2 device properties, either common ones (eg.
set on every device) or those specific to the libinput X11 driver. Keyboard
repeat/rate are set through core and XKB APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This object internally keeps track of the relevant input configuration,
and goes through its vmethods in order to apply the configuration on the
backend-specific devices.
So far, only mouse/touchpad settings are actually attached to GSettings
changes. ::set_matrix(), meant for tablets/touchscreens, is not hooked
yet.
One caveat is that meta_input_settings_create() may return NULL if the
backend does not own the windowing system (wayland nested on X11 being
the one case), and thus device settings can't be changed freely.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This patch removes the X11 specific code from MetaBarrier and creates an
abstraction layer MetaBarrierImpl. The existing X11 implementation is
moved to a new GObject MetaBarrierImplX11 implementing the abstract
interface MetaBarrierImpl which is instantiated by MetaBarrier when
supported.
While at it, move it to backends/ and properly name the files.
https://bugzilla.gnome.org/show_bug.cgi?id=706655
EDID parsing has been refactored to a common meta_output_parse_edid()
function, which ensures the extracted information is the same on both KMS
and X11 backend, so it can be used consistently on eg. settings values.
https://bugzilla.gnome.org/show_bug.cgi?id=742882
This reverts commit 47e339b46e. The
approach that was used to reduce the amount of work we do on RR events
to the necessary minimum is flawed. It assumes that, when the first
event we see where the retrieved XRRScreenResources.timestamp is
bigger than the previous, we already have all the data we need to
rebuild our view of the world.
That isn't true however, because the X server sends
RRScreenChangeNotify events for every step of the configuration
change, i.e. it lacks an atomic reconfiguration API. In particular, if
the X screen size is one of the changes, when we rebuild our state and
emit monitors-changed, the X screen size might still be the previous
one and since we stop updating ourselves until another reconfiguration
happens (noticed by looking at XRRScreenResources.timestamp) we end up
with the wrong idea of the X screen size.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
This optimization breaks our use of XRRScreenResources' timestamps to
detect hotplugs in case one of the outputs is disconnected and the
remaining ones don't need any mode, position or transform adjustments.
In that scenario, when applying the new configuration, we resize the X
screen but never call XRRSetCrtcConfig() and since XRRSetScreenSize()
doesn't take a timestamp and the X server doesn't update its last set
timestamp, when we next get a RRScreenChangeNotify and update
ourselves, XRRScreenResources.timestamp will still be smaller than
XRRScreenResources.configTimestamp which makes us think we're seeing a
new hotplug. We just don't enter an endless loop because the screen
size that we keep applying is always the same and the X server
short-circuits and stops sending us RRScreenChangeNotifys.
Always calling XRRSetCrtcConfig() ensures that the last set timestamp
will be bigger than configTimestamp in the next event and thus making
us trigger the monitors-changed signal properly.
Note that the X server already does basically the same checks that
we're removing here, so doing this shouldn't be a significant
efficiency loss. See
http://cgit.freedesktop.org/xorg/xserver/tree/randr/rrcrtc.c?h=server-1.16-branch#n539
It doesn't make sense to load cursor textures that we might not ever
use. Since the code here also uses CoglTexture2D, and cursors tend
to be NPOT textures, then we won't crash users of cards without
NPOT support. At least until they open the magnifier. :)
Refactor make_default_config() to always sanity-check the configuration to
ensure that it fits within the framebuffer. Previously, this was only done
for the default linear configuration.
In recent versions of the QXL driver, it may set "suggested X|Y" connector
properties. These properties are used to indicate the position at which
multiple displays should be aligned. If all outputs have a suggested position,
the displays are arranged according to these positions, otherwise we fall back
to the default configuration.
At the moment, we trust that the driver has chosen sane values for the
suggested position.
When the output device has hotplug_mode_update (e.g. the qxl driver used in
vms), the displays can be dynamically resized, so the current display
configuration does not often match a stored configuration. When a new
monitor is added, make_default_config() tries to create a new display
configuration by choosing a stored configuration with N-1 monitors, and then
adding a new monitor to the end of the layout. Because the stored config
doesn't match the current outputs, apply_configuration() will routinely
fail, leaving the additional display unconfigured. In this case, it's more
useful to just fall back to creating a new default configuration from
scratch so that all outputs get configured to their preferred mode.
Move logic for creating different types of configurations into separate
functions. This keeps things a bit cleaner and allows us to add alternate
configuration types more easily.
When a laptop's lid is closed we try to build and apply a temporary
configuration that disables the laptop's display if we have other
outputs.
This isn't enough though, we must also check if at least one of these
other outputs is enabled otherwise we'll try to resize the screen to
0x0 which (rightfully) hits an assertion.
https://bugzilla.gnome.org/show_bug.cgi?id=739450
It turns out that this was wrong because MetaWindow->monitor points to
the old monitor infos and they are needed to position windows in the
new configuration which happens in a monitors-changed handler.
This reverts commit e1704acda4.
The code in MetaMonitorConfig was really complex and was trying to do
way too much, using multiple different variables to determine where
things were stored, and trying to do fancy tricks to transfer
ownership.
Add a refcounting system to help simplify this, and clean up the logic.
Simply along the way, this fixes multiple bugs in the monitor config
logic, most notably bug #734889, which was my original goal to fix.
The X server sends several RRScreenChangeNotify events in a burst when
something happens which, currently, causes us to rebuild our view of
the world as many times and notify the upper layers about it which
causes a lot of bogus repeated work like rebuilding background actors.
We can avoid this extra work by looking at the timestamp in the
XRRScreenResources struct which is updated when an X client (including
us!) last changed something and comparing it with the previous
timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
meta_monitor_config_match_current() only matches the number of outputs
and if the output connector, vendor, product and serial match.
In the X backend, this means that we can't use it to bypass doing any
work because it won't detect cases where we actually want to update
ourselves like e.g. an output being turned off either by us or by
another X client (e.g. xrandr).
In the native backend, unlike the xrandr backend, we only get called
on real hotplug events and thus should always trigger the common
hotplug code to (possibly) apply a new mode so the check is pointless
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
In randr events, configTimestamp can be considered the hotplug time,
i.e. whenever the server notices hardware changes, this value will be
updated.
Having that in mind, we can re-work the logic to make it clearer.
There are no semantic changes.
The code here was a bit messy with the addition of
hotplug_mode_update, and the comments were a bit confusing and
inaccurate. Clean it up and comment it a bit better to make the flow and
intention more clear.
We need to tell clutter's evdev backend about the desktop's key repeat
settings so that our own key bindings event processing and
gnome-shell's chrome widgets get their fake key events for continuous
key press as they expect.
Note that the wayland frontend filters out these events and thus
wayland clients do not see them as specced.
https://bugzilla.gnome.org/show_bug.cgi?id=728055
The X server applies a default keymap to hotplugged keyboard
devices. To enforce our current settings we must re-upload the keymap
when a new keyboard shows up.
Note that setting the VCK keymap causes the server to propagate it
to all slave keyboard devices.
https://bugzilla.gnome.org/show_bug.cgi?id=737673
We overrode the property for PowerSaveMode, which meant that gdbus's
auto-generated PropertiesChanged code wasn't being run.
This really confused gnome-rr and gnome-settings-daemon's power plugin
about the current DPMS state of the display, since they used their
cached PowerSaveMode properties, and never saw a PropertiesChanged being
emitted.
If a display was on, they set it to off, and then set it back on, the
setting back on would never fire, since they thought the display was
already off.
To fix this, remove our custom property override and just respond to
notifications on the object.
Namely, this fixes the DPMS management when receiving notifications so
that it now properly times out.
Use the new DRM capabilities to figure out the correct cursor size, and
make sure that matches instead of hardcoding 64x64. This fixes incorrect
rendering on some newer AMD cards that support 256x256 cursors.
Based heavily on a patch by:
Alvaro Fernando García <alvarofernandogarcia@gmail.com>
We'll need this in the wayland frontend to send a modifiers event to
clients.
Note that on X11 this isn't needed because key events include the
group index encoded in modifier state. If we ever want to make the
wayland frontend work with the X11 backend we'll handle it then.
https://bugzilla.gnome.org/show_bug.cgi?id=736433
Setting the scaling factor immediately after calling clutter_init()
avoids creating the stage at one size, then later resizing it to
a different size.
https://bugzilla.gnome.org/show_bug.cgi?id=736279
In the case of a nested Wayland compositor inside an X session,
Clutter is managing the toplevel window size, so don't call
XResizeWindow on it - this will confuse Clutter and get the size
and the hints out of sync on the toplevel window.
https://bugzilla.gnome.org/show_bug.cgi?id=736279
If we add device 2, then add device 254, then remove device 254, then
the max device ID will be 253. Scan through all the devices again on
removal to calculate a new max device ID.
Rather than have the DBus code control this, move this into
MetaBackend. This also lets us destroy idle monitors when appropriate,
rather than leaking them forever.
We indeed call this function if we're not an X11 compositor, but in this
case we're simply calling it to say that we have no cursor overlay. Make
sure not to assert fail in this case.
RandR's QueryOutputProperty request makes the incredible decision of
throwing a BadName if you pass a property that doesn't exist, which
means that trying to check if a property exists is a royal pain when
using Xlib.
XCB's interface is much more friendly about errors and not having global
state and things like that, so use that instead to query our backlight
property.
If the property doesn't exist, a BadName error will be generated. This
is a terrible API, but it's what we're stuck with. Use
RRGetOutputProperty instead.
We've long used a switch statement on the grab operation to determine
where events should go. The issue with MetaGrabOp is that it's a mixture
of a few different things, including event routing, state management,
and the behavior to choose during operations.
This leads to poorly defined event routing and hard-to-follow logic,
since it's sometimes unclear what should point where, and our utility
methods for determining grab operations apart can be poorly named.
To fix this, establish the concept of a "event route", which describes
where events should be routed to.
Popups could not set the cursor image, because the cursor tracker would
ignore window cursors if we had a popup active. The correct condition to
check for is already in should_block_wayland. Rename this to the more
sensible name windows_are_interactable, and use it in the cursor tracker.
meta_backend_get_keymap is supposed to return a static keymap, not a new
one every time. Cache it internally. We don't update it when the keymap
changes on the server, but we'll do this soon.
This allows creating the stage much earlier than it otherwise would have
been. Our initialization sequence has always been a bit haphazard, with
first the MetaBackend created, then the MetaDisplay, and inside of that,
the MetaScreen and MetaCompositor.
Refactor this out so that the MetaBackend creates the Clutter
stage. Besides the clarity of early initialization, we now have much
easier access to the stage, allowing us to use it for things such as
key focus and beyond.
These methods allow us to set and get xkbcommon keymaps as well as
locking a specific layout in a layout group.
With this, we introduce dependencies on xkeyboard-config, xkbfile,
xkbcommon-x11 and a libX11 new enough to have xcb support.
https://bugzilla.gnome.org/show_bug.cgi?id=734301
Sometimes we can get a host event without having the display up and
running yet. Just don't pass it to the compositor in that case, since it
won't be possible for it to have any event that matters.
This reverts commit 3b85e4b2b9.
This breaks touch support; reverting would break wayland
(is what this patch tried to fix; we should find a better solution
that works on both).
When a touch sequence is passively grabbed and later rejected, events
will be replayed on the next client in propagation order, although those
events (either transformed to pointer events or not) will contain the
original timestamps, this will make grabs fail with InvalidTime if triggered
from the replayed ButtonPress/TouchBegin handler.
In order to work around this, store the most recent event time (presumably
gotten from the XI_TouchEnd caused by the passive grab being rejected), and
use that time on the events being replayed afterwards and grabs, so we don't
possibly fail with InvalidTime if those events result in a compositor grab.
The output_id is more of an opaque identifier for the monitor, based on
its underlying ID from the windowing system. Since we also use the term
"output_id" for the output's index, rename our use of the opaque cookie
"output_id" to "winsys_id".
This makes Alt+F7 / Alt+F8 work respectively under X11 nested mode.
For the native backend implementation, we'll need a special Clutter
function, so don't implement that for now.
This uses David Herrmann's new logind sessions interface to retrieve
fds for input devices, rather than using a custom setuid helper to do
the management. This vastly simplifies the interface.
This requires systemd v210, at least.
https://bugzilla.gnome.org/show_bug.cgi?id=724604
When switching from the stage cursor to the native cursor, we
forgot to repaint the stage to get rid of the old cursor. Fix
this by having the abstract cursor renderer class track whether
we're using the backend, rather than doing chain-up shenanigans.
We expect that meta_screen_set_cursor while grabbed will properly
set the cursor on the root window. Make sure this works by simply
always using the root cursor when we have an active grab.
We can only apply a configuration if its outputs match the connected
ones, so discard the current configuration if the set of output changes
(for example for hotplug), otherwise we will crash trying to apply
the bogus previous configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=725637
Advertise the scale factor on the output and transform pointer and damage
events as well as input and opaque regions for clients
that scale up by themselves i.e use set_buffer_scale.
We do not scale any 'legacy' apps yet.
https://bugzilla.gnome.org/show_bug.cgi?id=728902
When we click on a window with a passive grab, then the event_x
and event_y will be relative to that window, instead of relative to
the stage, which means that picking will be wrong.
Forcibly using root_x / root_y breaks nested mode. Nested mode is
a testing mode that should be replaced by a DRI3-enabled Xephyr,
though. It's getting too hairy to support properly.
