1
0
Fork 0
Commit graph

95 commits

Author SHA1 Message Date
Jonas Ådahl
2eda81aadf remote-desktop/session: Limit device type access when using libei
The portal could limit access to certain device types, but this was not
forwarded to the EIS context. Add a way to do this, and make use of it.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
2023-09-01 10:43:26 +00:00
Olivier Fourdan
6d0b682d98 remote-desktop/eis: Add support for ConnectToEIS.
Remote desktop version 2 added a new method ConnectToEIS .

ConnectToEIS allows clients to requests a file descriptor from the
compositor which can then be used directly from libei.

Once established, the communication between compositor and application
is direct, without the need to go through the portal process(es).

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
2023-07-14 22:23:45 +00:00
Jonas Ådahl
2fb3bdf774 input-capture: Hook up capturing of events to active session
This adds the actual input capturing rerouting that takes events and
first hands them to the input capture session, would it be active.
Events are right now not actually processed in any way, but will
eventually be passed to a libei client using libeis.

A key binding for allowing cancelling the capture session is added
(defaults to <Super><Shift>Escape) to avoid getting stuck in case the client
doesn't even terminate the session.

The added test case makes sure that the pointer moves again after
pressing the keybinding.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
2023-07-14 22:23:45 +00:00
Jonas Ådahl
2a8c11d69b input-capture: Add D-Bus method to clear barriers
This will be needed by the portal backend.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
2023-07-14 22:23:45 +00:00
Jonas Ådahl
a8b013b006 Add beginning of input capture API
This API aims to provide a way for users to capture input devices under
certain conditions, for example when a pointer crosses a specified
barrier.

So far only part of the API is implemented, specifially the session
management as well as zone advertisement, where a zone refers to a
region in the compositor which edges will eventually be made available
for barrier placement.

So far the remote access handle is created while the session is enable,
despite the input capturing isn't actually active yet. This will change
in the future once it can actually become active.

v2: Remove absolute/relative pointer, keep only pointer (ofourdan)

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
2023-07-14 22:23:45 +00:00
Robert Mader
9be511453e Revert "udev-rules: Disable sending modifiers to clients with amdgpu"
Original commit message:
> ATM sending modifiers to clients prevents direct scanout for DRI3
> clients via Xwayland. Xwayland using the dma-buf feedback v4 Wayland
> protocol will solve that, but that might take a while yet to appear in
> the wild. Once that happens, this can be reverted.
>
> Direct scanout still works for native Wayland clients as well.

Xwayland got support for v4 in 23.1.0, thus let's reenable modifiers on
AMD.

This reverts commit 2f825f3a86.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3030>
2023-05-30 14:25:18 +02:00
Dmitry V. Levin
26d13f4269 udev-rules: Fix warnings reported by udevadm verify
Fix the following warnings reported by udevadm verify:

data/61-mutter.rules:2 Whitespace after comma is expected.
...
data/61-mutter.rules:116 Whitespace after comma is expected.
data/61-mutter.rules: udev rules check failed

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3011>
2023-05-22 16:35:24 +00:00
Alexandre Franke
eab928918d Fix shortcut wording
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2982>
2023-05-08 21:00:05 +00:00
Jonas Ådahl
39b28ad8c8 build: Join keybindings path correctly too
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2985>
2023-05-04 12:35:38 +00:00
Jonas Ådahl
61b42e5303 build: Use / operator instead of join_paths everywhere
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2985>
2023-05-04 12:35:38 +00:00
Jonas Ådahl
74fcdb9a62 Introduce the 'service channel' D-Bus service
The service channel D-Bus interface aims to be a "back door" for
services that needs special casing in Mutter, e.g. have custom private
protocols only meant to be used by that particular service.

There are currently no special casing implemented; only the basic
service channel infrastructure is added. There is a single method on the
interface, that is meant to eventually be used by
xdg-desktop-portal-gnome to open a Wayland connection with a private
protocol needed for the portal backend's rather special window
management needs.

The service channel Wayland client works by allowing one instance of
each "type", where each time needs to be defined to work in parallel. If
a new service client connects, the old one will be disconnected.

MetaWaylandClient's are used to manage the service clients, and are
assigned the service client type.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
2023-02-13 15:34:24 +00:00
Jake Dane
619fc55408 desktop: Remove obsolete desktop file
The X-GNOME-Bugzilla-* entries in the desktop file were for use by
bug-buddy, a GNOME 2 technology that's been gone for over a decade.
These entries are obsolete and the desktop file can be removed.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2621>
2023-02-06 15:19:17 +00:00
Anders Jonsson
0d6b0fc165 settings: Fix spelling of endianness
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2813>
2023-01-29 17:37:43 +01:00
Florian Müllner
6d7a5a91bf schemas: Consistently use child schemas
Currently subschemas in org.gnome.mutter are marked as child schemas,
but subschemas in org.gnome.mutter.wayland are not. There's no harm
with that, it's just nice to be consistent, and having schemas show
up in `gsettings list-children` is a nice touch.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2809>
2023-01-27 21:12:18 +01:00
Florian Müllner
813b85e081 schemas: Remove unused keys
Mutter's own tab popup implementation was removed almost a decade
ago, about time to clean out the left-over settings.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2809>
2023-01-27 21:02:17 +01:00
Olivier Fourdan
5be6e7b18e settings: Add Xwayland byte-swapped clients
Recent versions of Xwayland can allow or disallow X11 clients from
different endianess to connect.

Add a setting to configure this feature from mutter, who spawns
Xwayland.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2785>
2023-01-17 11:14:19 +01:00
Sameer Lattannavar
9fab8410d7 data/udev: Don't disable KMS modifiers on newer i915 systems
When modifiers are enabled on mutter on some of the older i915 systems observed
Black-screen on 2nd monitor during multi-head use cases, upon debugging observed
that disabling modifiers on these systems resolved the Black-screen issue:!1618.

This issue depends whether we have enough DBuf space to provide required bandwidth
for the userspace demands. Those platforms which have less Display Buffer, will
just have more chance to face lack of it. However it still depends on various
factors like amount of planes(i.e the more planes we have, the more we divide the buffer),
refresh rate, bpp and so on.
This affects watermark calculations and the minimum blocks required for at least
wm level 0. If we don't have sufficient ddb at least for wm0 for all planes in
the configuration then it is rejected.

Until we have TEST_ONLY commit solution is built we could make sure to disable
modifiers support on these older i915 systems based on udev rules defined in this commit.

This commit makes sure that modifiers are still usable on latest i915 systems.

List of PCI-IDs are referred from:
f8bf2a9a15/include/pci_ids/iris_pci_ids.h

Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/1618
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2641>
2022-11-04 18:23:15 +00:00
Michel Dänzer
2f825f3a86 udev-rules: Disable sending modifiers to clients with amdgpu
ATM sending modifiers to clients prevents direct scanout for DRI3
clients via Xwayland. Xwayland using the dma-buf feedback v4 Wayland
protocol will solve that, but that might take a while yet to appear in
the wild. Once that happens, this can be reverted.

Direct scanout still works for native Wayland clients as well.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2637>
2022-09-22 08:32:02 +00:00
Carlos Garnacho
7a1beb817d backends: Expose InputMapping D-Bus path to determine tablet mapping
Currently, the peripheral "output" setting will be unset if Mutter is
deciding automatically the mapped output of a tablet device. In that
case, gnome-control-center will have a hard time figuring out itself
the better output to show the tablet calibration UI, unless it's hand
held by Mutter.

Add this private D-Bus interface so that gnome-control-center can look
up the output as determined by Mutter to bring the missing harmony
between both. This interface consists of a simple method to get the
mapped output for a input device node.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2605>
2022-09-02 18:34:36 +00:00
Jonas Ådahl
b3fa4a6cd8 color-manager: Add API to set brightness
It uses the org.gnome.SettingsDaemon.Power.Screen D-Bus API. Currently
brightness set if the proxy is not ready are ignored; whether the
brightness value should be cached and set once it appears or whether
color profiles should be reapplied is yet to be decided.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
2022-09-01 17:52:01 +02:00
Jonas Ådahl
43cd70089e color-manager: Set up a D-Bus proxy to org.gnome.SettingsDaemon.Color
gsd-color provides this API, which exposes details about the night light
state. Currently, gsd-color also turns this state into CRTC gamma
changes, but this will eventually change, and this is a preparation for
this.

The proxy isn't yet used for anything.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
2022-09-01 16:54:04 +02:00
Salman Malik
e2d4da8562 screen-cast-stream: Embed the wayland output name to streams
If a screencast session is screencasting from multiple monitors,
it is not possible to distinguish which stream (or PipeWire stream
node id) belongs to which connected monitor (such information may be useful
to the caller e.g. caller might want to embed the stream in a window
and name it after the monitor connector, for example). This change adds
optional metadata for monitor streams to also return the wayland output
name with the stream.

Ideally, this metadata should equip the caller to get more information about
display from the following Wayland interfaces:

https://wayland.freedesktop.org/docs/html/apa.html#protocol-spec-wl_output
https://wayland.app/protocols/xdg-output-unstable-v1

Related:
- https://github.com/flatpak/xdg-desktop-portal/pull/832
- https://gitlab.gnome.org/GNOME/xdg-desktop-portal-gnome/-/merge_requests/48

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2540>
2022-08-15 17:01:27 +00:00
Jonas Ådahl
8fdb80a718 monitor-manager: Add NightLightSupported property to DisplayConfig
This checks whether it's possible to set a CRTC GAMMA_LUT, which is what
is necessary to implement night light.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2310>
2022-05-17 08:42:25 +00:00
Jonas Ådahl
52ce81657d backend/native: Only disable dmabuf screen cast when not hw accelerated
We now only enable DMA buffer based PipeWire screen casting if a
format/modifier has been negotiated. This practically means a consumer
is aware about what is needed, and we should not try to predict that it
uses the DMA buffer the right way (i.e. not mmap:ing directly).

However, in case we're not hardware accelerated, we never want to
attempt to use DMA buffer screen sharing, as we want to avoid
compositing into a DMA buffer on such hardware as doing so can be very
slow.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2086>
2022-02-07 19:16:45 +00:00
Olivier Fourdan
226afa24aa xwayland: Use Xwayland auto-terminate feature
When using Xwayland-on-demand (default), if the (experimental) autoclose
features is enabled, we can rely on Xwayland's auto-terminate feature
instead of explicitly killing the Xwayland process.

With it, gone is the mechanism that was added to check the X11 clients
connected and their executable to check whether we can (safely) kill
Xwayland.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1794>
2022-01-26 14:42:22 +01:00
Jonas Ådahl
b49421d8e8 monitor-config-store: Allow changing D-Bus configuration policy
Adding a <dbus/> element containing a boolean (yes/no) determines
whether org.gnome.Mutter.DisplayConfig ApplyMonitorsConfig will be
callable. The state is also introspectable via the
ApplyMonitorsConfigAllowed property on the same interface.

For example

    <monitors version="2">
      <policy>
        <dbus>no</dbus>
      </policy>
    </monitors>

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
2022-01-25 16:25:48 +00:00
Pascal Nowack
ecd45d28ac remote-desktop: Unify codestyle in API
The code style in the remote-desktop API is currently a mess.
While, the overall code style in mutter and gnome-remote-desktop is to
use spaces as tabulator, the remote-desktop API is mixed with both
spaces as tabulators and actual tabulators.
In addition to that, the code style in the XDG desktop portal APIs uses
spaces as tabulators as well.

To unify the code style, replace all actual tabulators with spaces.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2255>
2022-01-25 10:49:12 +00:00
Pascal Nowack
cff95d4932 screencast: Unify codestyle in API
The code style in the screencast API is currently a mess.
While, the overall code style in mutter and gnome-remote-desktop is to
use spaces as tabulator, the remote-desktop API is mixed with both
spaces as tabulators and actual tabulators.
In addition to that, the code style in the XDG desktop portal APIs uses
spaces as tabulators as well.

To unify the code style, replace all actual tabulators with spaces.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2255>
2022-01-25 10:49:12 +00:00
Marco Trevisan (Treviño)
fd1f6094c9 monitor-manager: Expose the privacy screen state on DBus current state
Expose each monitor state as two booleans, not to expose the whole flags

Related-to: GNOME/gnome-control-center#909
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1952>
2022-01-25 07:31:19 +00:00
Jonas Ådahl
8de449dc72 udev-rules: Only disable modifiers on i915
The only currently known issue with allocating scanout buffers with
modifiers is memory constraints in multi head setups. Heuristics for
handling that are not implemented, but since it doesn't apply to
anything but i915, remove the other drivers from the deny list.

The other drivers had modifiers disabled to marginally increase the
chance of becoming scanout-able when allocated by Xwayland.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2146>
2022-01-05 20:00:36 +00:00
Jonas Ådahl
e6a2d61a2f gschema: Make 'kms-modifiers' only about scanout buffers
It's not used to determine what we send to Wayland clients anymore, it
does so by default.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2146>
2022-01-05 20:00:36 +00:00
Jonas Ådahl
1978e93f28 wayland/dma-buf: Prepare format/modifier map up front
As the format table is setup up front, it doesn't change when this
experimental feature setting change. Make the settings documentation
reflect that.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1959>
2022-01-05 16:36:48 +00:00
Jonas Ådahl
70c6d28fca ScreenCast: Allow recording new streams on active sessions
This is useful if you have a session, and want to "hot-plug" new sources
over time; there is no point in having to create separate sessions for this.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2131>
2021-12-07 19:23:52 +00:00
Jonas Ådahl
3c1f50a85e Move D-Bus interface files to dedicated directory
Place the XML files in data/dbus-interfaces.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2126>
2021-12-07 18:52:29 +00:00
Robert Mader
331f08fc40 gschema: Turn experimental features into flags
Defining valid values makes
1. changing settings less error prone
2. sure they are discoverable.

This does reset the values once on update, but fortunately does *not*
change the way to set the values. Thus e.g. enabling fractional scaling
via terminal command still works as before and internet guides stay valid.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1961>
2021-10-26 16:24:41 +00:00
Robert Mader
49aa801454 gschema: Add "kms-modifiers" experimental feature description
To make it more discoverable. While on it, fix a typo.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1961>
2021-10-26 16:24:41 +00:00
Carlos Garnacho
820aa18126 backends/native: Use rtkit to get realtime priority
Instead of using sched_setscheduler directly (and relying that we
somehow got CAP_SYS_NICE), use rtkit to do this for us.

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2284
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2060>
2021-10-22 08:35:15 +00:00
Florian Müllner
1f26dc12e5 data: Stop exposing old panel-main-menu shortcut
There hasn't been a "panel main menu" for ten years now, and gnome-shell
already exports a 'toggle-overview' shortcut for the GNOME 3 replacement.

https://discourse.gnome.org/t/difference-between-show-the-overview-and-show-the-activities-overview-keyboard-shortcuts/6572

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1886>
2021-08-30 21:43:34 +00:00
Florian Müllner
6288763671 build: Stop using source_root()/build_root()
They were deprecated in meson 0.56.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1957>
2021-08-22 17:32:12 +00:00
Jonas Ådahl
c3feb83529 udev-rules: Use ID_PATH to detect vkms
Matching against the driver doesn't seem to work, and isn't showing in
udevadm info. Switch to checking ID_PATH; hopefully it won't change too
often.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1892>
2021-06-09 19:21:44 +00:00
Carlos Garnacho
f954ff84b8 backends/native: Disable KMS modifiers on "radeon" driver
This is a driver for old AMD/ATI GPUs and doesn't seem to support
modifiers. Tag this driver as not having support for KMS modifiers.

Related: https://bugzilla.redhat.com/show_bug.cgi?id=1960937
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1872>
2021-05-19 20:52:03 +02:00
Michel Dänzer
c5943cd082 meson: Add udev_dir option
Same as in gnome-settings-daemon, allows overriding where to install
udev rules files.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1844>
2021-05-04 15:53:24 +00:00
Jonas Ådahl
8989c42d40 backend/native: Add udev rule to ignore vkms devices
Virtual Kernel Mode Setting (vkms) is a virtual /dev/dri/card* device
not backed by any actual hardware. It's intended for testing purposes,
e.g. to run tests suites with a reproducable setup, or in continuous
integration pipelines.

Currently mutter don't have any tests that can run on top of vkms, but
will eventually get that. To prepare for the ability to do that, and
having said kernel module loaded without causing wierd issues with any
active session, add an udev rule that tells mutter to ignore any vkms
device.

Otherwise, when vkms is loaded, mutter would detect it, assume it's a
regular monitor, configure it as such, thus add a region of the stage
that ends up nowhere, which isn't very helpful. It might also conflict
with running actual tests that need to interact with vkms if the active
session has taken control of it.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1740>
2021-04-30 15:10:28 +02:00
Florian Müllner
d2a492de94 data: Add back (hidden) shortcuts for vertical navigation
Users who customized their workspace shortcuts before updating to
GNOME 40 are experiencing troubles when trying to use the same
keybinding for the horizontal shortcuts, because of hidden conflicts
with the vertical ones.

We can address this by registering the old shortcuts with Settings
without showing them in the UI, so that they are taken into account
by Settings' conflict resolution.

https://gitlab.gnome.org/GNOME/mutter/-/issues/1740

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1814>
2021-04-15 15:31:10 +00:00
Jonas Ådahl
ad1bffc002 backend/native: Disable KMS modifiers for amdgpu and nouveau as well
Lets wait until we have better ways to unredirect client buffers before
we start enabling KMS modifiers for amdgpu and nouveau; we end up with
mismatch between client buffer modifiers and primary plane modifier,
which right now needs to be the same for unredirection.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1792>
2021-04-14 07:14:24 +00:00
Jonas Ådahl
da3baba980 backend/native: Only disable KMS modifiers for i915
The intel DRM driver is known for not being able to handle multi head
setups when KMS modifiers are enabled, due to the implicitly selected
modifiers, while being more suitable for single head setups, cause
bandwidth issues when a certain number of monitor times resolution and
refresh rate is configured.

We don't yet support automatically finding a combination of modifiers
that work, and have because of this disabled KMS modifiers unless the
driver actually needs it.

Lets flip this configuration the other way around, changing the current
udev rule to decide wen to *disable* KMS modifier support, as it so that
only the Intel driver has this problem, while on the other hand, there
several drivers that requires modifiers to function at all.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1792>
2021-04-14 07:14:24 +00:00
Florian Müllner
36424ab298 data: Updated exposed keybindings
Workspaces were changed to a horizontal layout, so we should show
the keybindings for horizontal navigation in Settings instead of
the vertical ones.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1706>
2021-02-04 00:09:57 +01:00
Björn Daase
ea39379224 gschema: Fix capitalization of autoclose-xwayland option
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1696>
2021-02-01 18:56:39 +01:00
Olivier Fourdan
cde0cd5d23 xwayland: Enable Xwayland on demand by default
Make "Xwayland on demand" the default policy when Xwayland supports
"initfd" and remove the corresponding experimental feature.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1673>
2021-01-19 09:33:33 +01:00
Olivier Fourdan
3fc603edd3 xwayland: Make autoclose-xwayland an exp. feature
Closing automatically Xwayland once all relevant X11 clients are gone is
inherently racy, if a new client comes along right at the time we're
killing Xwayland.

Fixing the possible race conditions between mutter, Xwayland and the X11
clients may take some time.

Meanwhile, make that an experimental feature "autoclose-xwayland".

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1673>
2021-01-19 09:33:33 +01:00