To mirror what happens in meta_onscreen_native_swap_buffers_with_damage(), warn
here too if next_fb is not NULL. This makes it clear to the reader of what the
expectations are inside this function.
Ensuring next_fb is NULL as the first thing in the function will make all error
paths equal: no longer some failures reset next_fb while others don't. Removing
such special cases should reduce surprises.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/810
If we end up trying to do a mode set on a DRM state that has already
changed behind our back without us yet having seen the hotplug event we
may fail with `EINVAL`. Since the renderer layer doesn't handle mode set
failure, it'll still try to page flip later on, which will then also
fail. When failing, it'll try to look up the cached mode set in order to
retry the mode set later on, as is needed to handle other error
conditions. However, if the mode set prior to the page flip failed, we
won't cache the mode set, and the page flip error handling code will get
confused.
Instead of asserting that a page flip always has a valid cached mode set
ready to look up, handle it being missing more gracefully by failing to
mode set. It is expected that things will correct themself as there
should be a hotplug event waiting around the the corner, to reconfigure
the monitor configuration setting new modes.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/917https://gitlab.gnome.org/GNOME/mutter/merge_requests/1007
The method `relative_motion_across_outputs` is used to adjust the
distance/delta of a mouse movement across multiple monitors to take the
different scale factors of those monitors into account. This works by
getting the adjacent monitors that the movement-line/vector intersects
with and adjusting the final position (or end point of the
movement-line) by multiplying the parts of the line spanning across
different monitors with the scale factors of those monitors.
In the end of this calculation, we always want to set the new end
coordinates of the relative motion to the new end coordinates of the
adjusted movement-line. We currently only do that if all adjacent
monitors the line is crossing actually exist, because only then we end
up inside the "We reached the dest logical monitor" else-block and set
`x` and `y` to the correct values. Fix that and make sure the returned
values are also correct in case an adjacent monitor doesn't exist by
adding separate `target_x` and `target_y` variables which we update during
each pass of the while loop so we're always prepared for the while loop
exiting before the destination monitor was found.
Thanks to Axel Kittenberger for reporting the initial bug and tracking
the issue down to `relative_motion_across_outputs`.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/774
Touch-wise, those are essentially giant touchpads, but have no buttons
associated to the "touchpad" device (There may be pad buttons, but
those are not mouse buttons).
Without tap-to-click/drag, touch in those devices is somewhat useless
out of the box. Have them always enable these features, despite the
setting.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/968
Using the same scale for the window as the
logical monitor only works correctly when having
the experimental 'scale-monitor-framebuffer'
feature enabled.
Without this experimental feature, the stream
will contain a black screen, where the actual
window only takes a small part of it.
Therefore, use a scale of 1 for the non-
experimental case.
Patch is based on commit 3fa6a92cc5.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/976
Presumably this function is supposed to be like
meta_kms_impl_simple_handle_page_flip_callback() but the condition in the
if-statement is inverted. Fix the inversion to make these two functions look
alike.
This is part 2 of 2 fixing a complete desktop freeze when drmModePageFlip()
fails with EINVAL and the fallback to drmModeSetCrtc() succeeds but the success
is not registered correctly as completed "flip". The freeze occurs under
wait_for_pending_flips() which calls down into meta_kms_impl_device_dispatch()
which ends up poll()'ing the DRM fd even though drmModeSetCrtc() will not
produce a DRM event, hence the poll() never returns. The freeze was observed
when hotplugging a DisplayLink dock for the first time on Ubuntu 19.10.
This patch makes meta_set_fallback_feedback_idle() actually end up calling into
notify_view_crtc_presented() which decrements
secondary_gpu_state->pending_flips so that wait_for_pending_flips() can finish.
CC stable: gnome-3-34
https://gitlab.gnome.org/GNOME/mutter/merge_requests/953
mode_set_fallback() schedules a call to mode_set_fallback_feedback_idle(), but
it is possible for Mutter to repaint before the idle callbacks are dispatched.
If that happens, mode_set_fallback_feedback_idle() does not get called before
Mutter enters wait_for_pending_flips(), leading to a deadlock.
Add the needed interfaces so that meta_kms_device_dispatch_sync() can flush all
the implementation idle callbacks before it checks if any "events" are
available. This prevents the deadlock by ensuring
mode_set_fallback_feedback_idle() does get called before potentially waiting
for actual DRM events.
Presumably this call would not be needed if the implementation was running in
its own thread, since it would eventually dispatch its idle callbacks before
going to sleep polling on the DRM fd. This call might even be unnecessary
overhead in that case, synchronizing with the implementation thread needlessly.
But the thread does not exist yet, so this is needed for now.
This is part 1 of 2 fixing a complete desktop freeze when drmModePageFlip()
fails with EINVAL and the fallback to drmModeSetCrtc() succeeds but the success
is not registered correctly as completed "flip". The freeze occurs under
wait_for_pending_flips() which calls down into meta_kms_impl_device_dispatch()
which ends up poll()'ing the DRM fd even though drmModeSetCrtc() will not
produce a DRM event, hence the poll() never returns. The freeze was observed
when hotplugging a DisplayLink dock for the first time on Ubuntu 19.10.
CC stable: gnome-3-34
https://gitlab.gnome.org/GNOME/mutter/merge_requests/953
They have been deprecated for a long time, and all their uses in clutter
and mutter has been removed. This also removes some no longer needed
legacy state tracking, as they were only ever excercised in certain
circumstances when there was sources (pipelines or materials) on the now
removed source stack.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
When painting, actors rely on semi global state tracked by the state to
get various things needed for painting, such as the current draw
framebuffer. Having state hidden in such ways can be very deceiving as
it's hard to follow changes spread out, and adding more and more state
that should be tracked during a paint gets annoying as they will not
change in isolation but one by one in their own places. To do this
better, introduce a paint context that is passed along in paint calls
that contains the necessary state needed during painting.
The paint context implements a framebuffer stack just as Cogl works,
which is currently needed for offscreen rendering used by clutter.
The same context is passed around for paint nodes, contents and effects
as well.
In this commit, the context is only introduced, but not used. It aims to
replace the Cogl framebuffer stack, and will allow actors to know what
view it is currently painted on.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Checking the leds is not really accurate, since some devices have mode
switch buttons without leds. Check in the button flags whether they are
mode switch buttons for any of ring/ring2/strip/strip2, and return the
appropriate group.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/952
There might be some inconsistent event for which we don't have a known
source device.
In the current state we don't handle them and we could crash when getting
the current device tool.
So, add an utility function that retrieves the source device for an event
that warns if no device is found, and use this for Motion, Key and Button
events.
In case we don't have a valid source in such case, just return early instead
of trying to generate invalid clutter events.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/823
This is inspired by 98892391d7 where the usage of
`g_signal_handler_disconnect()` without resetting the corresponding
handler id later resulted in a bug. Using `g_clear_signal_handler()`
makes sure we avoid similar bugs and is almost always the better
alternative. We use it for new code, let's clean up the old code to
also use it.
A further benefit is that it can get called even if the passed id is
0, allowing us to remove a lot of now unnessecary checks, and the fact
that `g_clear_signal_handler()` checks for the right type size, forcing us
to clean up all places where we used `guint` instead of `gulong`.
No functional changes intended here and all changes should be trivial,
thus bundled in one big commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/940
Properly take the panel_orientation_transform into account in
update_monitor_crtc_cursor. This fixes us sometimes drawing the cursor
on two monitors at the same time as we did not properly swap the crtc
width/height when a panel_orientation_transform is active.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/927
Add missing clutter_x11_[un]trap_x_errors around the XIGetProperty call
in meta-input-settings-x11.c's get_property helper function.
This fixes mutter crashing with the following error if the XInput device
goes away at an unconvenient time:
X Error of failed request: XI_BadDevice (invalid Device parameter)
Major opcode of failed request: 131 (XInputExtension)
Minor opcode of failed request: 59 ()
Device id in failed request: 0x200011
Serial number of failed request: 454
Current serial number in output stream: 454
https://gitlab.gnome.org/GNOME/mutter/merge_requests/928
Create the intermediate shadow framebuffer for use exclusively when a
shadowfb is required.
Keep the previous offscreen framebuffer is as an intermediate
framebuffer for transformations only.
This way, we can apply transformations between in-memory framebuffers
prior to blit the result to screen, and achieve acceptable performance
even with software rendering on discrete GPU.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/877
When a touch sequence was rejected, the emulated pointer events would be
replayed with old timestamps. This caused issues with grabs as they
would be ignored due to being too old. This was mitigated by making sure
device event timestamps never travelled back in time by tampering with
any event that had a timestamp seemingly in the past.
This failed when the most recent timestamp that had been received were
much older than the timestamp of the new event. This could for example
happen when a session was left not interacted with for 40+ days or so;
when interacted with again, as any new timestamp would according to
XSERVER_TIME_IS_BEFORE() still be in the past compared to the "most
recent" one. The effect is that we'd always use the `latest_evtime` for
all new device events without ever updating it.
The end result of this was that passive grabs would become active when
interacted with, but would then newer be released, as the timestamps to
XIAllowEvents() would out of date, resulting in the desktop effectively
freezing, as the Shell would have an active pointer grab.
To avoid the situation where we get stuck with an old `latest_evtime`
timestamp, limit the tampering with device event timestamp to 1) only
pointer events, and 2) only during the replay sequence. The second part
is implemented by sending an asynchronous message via the X server after
rejecting a touch sequence, only potentially tampering with the device
event timestamps until the reply. This should avoid the stuck timestamp
as in those situations, we'll always have a relatively up to date
`latest_evtime` meaning XSERVER_TIME_IS_BEFORE() will not get confused.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/886
Instead of doing a roundtrip to the X server before setting it, rely on
the previous value fetched before the configuration was sent over DBus.
This matches the argument check we already do elsewhere, and will allow
us to more easily add an additional condition to determine if underscan
is supported.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/673
If we did a mode set, the gamma may have been changed by the kernel, and
if we didn't also update the gamma in the same transaction, we have no
way to predict the current gamma ramp state. In this case, read the
gamma state directly from KMS.
This should be relatively harmless regarding the race conditions the
state prediction was meant to solve, as the worst case is we get none or
out of date gamma ramps; and since this is for when gamma ramps are not
updated at mode setting time, we'd get intermediate gamma state to begin
with, so it's not worse than what we currently do anyway.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/851https://gitlab.gnome.org/GNOME/mutter/merge_requests/840
Xkb events should be handled by clutter backend but they are not translated
into an actual clutter event. However we're now handling them and also trying
to push an empty event to clutter queue, causing a critical error.
So in such case, just handle the native event but don't push the non-populated
clutter-event to the queue.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/750https://gitlab.gnome.org/GNOME/mutter/merge_requests/764
The inhibited state of the monitor was after the initializiation never
updated. meta_idle_monitor_reset_idletime didn't respect the inhibited
state, so it set timeouts if it shouldn't have.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/573
We can't just update the state of the connector and CRTC from KMS since
it might contain too new updates, e.g. from a from a future hot plug. In
order to not add ad-hoc hot plug detection everywhere, predict the state
changes by looking inside the MetaKmsUpdate object, and let the hot-plug
state changes happen after the actual hot-plug event.
This fixes issues where connectors were discovered as disconnected while
doing a mode-set, meaning assumptions about the connectedness of
monitors elsewhere were broken until the hot plug event was processed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/782https://gitlab.gnome.org/GNOME/mutter/merge_requests/826
It was not the lack of forcing the shadow fb that caused slowness, but
rather due to the method the shadow fb content was copied onto the
scanout fb. With 'clutter: Use cogl_blit_framebuffer() for shadow FB'
we'll use a path that shouldn't be slow when copying onto the scanout
fb.
Also 437f6b3d59 accidentally enabled
shadow fb when using hw accelerated contexts, due to the cap being set
to 1 in majority of drivers. While the kernel documentation for the
related field says "hint to userspace to prefer shadow-fb rendering",
the name of the hint when exposed to userspace is
DRM_CAP_DUMB_PREFER_SHADOW, thus should only be taken into consideration
for dumb buffers, not rendering in general.
This reverts commit 437f6b3d59.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/818
The commit 'renderer/native: Use shadow fb on software GL if preferred'
attempted to force using a shadow fb when using llvmpipe in order to
speed up blending, but instead only did so when llvmpipe AND the drm
device explicityl asked for it.
Now instead always force it for llvmpipe and other software rendering
backends, and otherwise just query the drm device (i.e.
DRM_CAP_DUMB_PREFER_SHADOW).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/807
When suspending, the devices are removed and the virtual device
associated with the corresponding core pointer is disposed.
Add the pointer accessibility virtual device to the core pointer
on resume to restore pointer accessibility on resume if enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/761
Threaded swap wait was added for using together with the Nvidia GLX
driver due to the lack of anything equivalent to the INTEL_swap_event
GLX extension. The purpose was to avoid inhibiting the invocation of
idle callbacks when constantly rendering, as the combination of
throttling on swap-interval 1 and glxSwapBuffers() and the frame clock
source having higher priority than the default idle callback sources
meant they would never be invoked.
This was solved in gbz#779039 by introducing a thread that took care of
the vsync waiting, pushing frame completion events to the main thread
meaning the main thread could go idle while waiting to draw the next
frame instead of blocking on glxSwapBuffers().
As of https://gitlab.gnome.org/GNOME/mutter/merge_requests/363, the
main thread will instead use prediction to estimate when the next frame
should be drawn. A side effect of this is that even without
INTEL_swap_event, we would not block as much, or at all, on
glxSwapBuffers(), as at the time it is called, we have likely already
hit the vblank, or will hit it soon.
After having introduced the swap waiting thread, it was observed that
the Nvidia driver used a considerable amount of CPU waiting for the
vblank, effectively wasting CPU time. The need to call glFinish() was
also problematic as it would wait for the frame to finish, before
continuing. Due to this, remove the threaded swap wait, and rely only on
the frame clock not scheduling frames too early.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=781835
Related: https://gitlab.gnome.org/GNOME/mutter/issues/700
[jadahl: Rewrote commit message]
https://gitlab.gnome.org/GNOME/mutter/merge_requests/602
We are really more interested in when a window is damaged, rather than
when it's painted, for screen casting windows. This also has the benefit
of not listening on the "paint" signal of the actor, meaning it'll open
doors for hacks currently necessary for taking a screenshot of a window
consisting of multiple surfaces.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/752
The end goal is to have all clutter backend code in src/backends. Input
is the larger chunk of it, which is now part of our specific
MutterClutterBackendNative, this extends to device manager, input devices,
tools and keymap.
This was supposed to be nice and incremental, but there's no sane way
to cut this through. As a result of the refactor, a number of private
Clutter functions are now exported for external backends to be possible.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
The end goal is to have all clutter backend code in src/backends. Input
is the larger chunk of it, which is now part of our specific
MutterClutterBackendX11, this extends to device manager, input devices,
tools and keymap.
This was supposed to be nice and incremental, but there's no sane way
to cut this through. As a result of the refactor, a number of private
Clutter functions are now exported for external backends to be possible.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
Introduce MetaCompositorX11, dealing with being a X11 compositor, and
MetaCompositorServer, being a compositor while also being the display
server itself, e.g. a Wayland display server.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/727
Add meta-kms and meta-monitor-manager-kms listener for the udev
device-removed signal and on this signal update the device state /
re-enumerate the monitors, so that the monitors properly get updated
to disconnected state on GPU removal.
We really should also have meta-backend-native remove the GPU itself
from our list of GPU objects. But that is more involved, see:
https://gitlab.gnome.org/GNOME/mutter/issues/710
This commit at least gets us to a point where we properly update the
list of monitors when a GPU gets unplugged; and where we no longer
crash the first time the user changes the monitor configuration after
a GPU was unplugged.
Specifically before this commit we would hit the first g_error () in
meta_renderer_native_create_view () as soon as some monitor
(re)configuration is done after a GPU was unplugged.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
drmModeGetConnector may fail and return NULL, this may happen when
a connector is removed underneath us (which can happen with e.g.
DP MST or GPU hot unplug).
Deal with this by skipping the connector when enumerating and by
assuming it is disconnected when checking its connection state.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
drmModeGetCrtc may fail and return NULL. This will trigger when
meta_kms_crtc_update_state gets called from meta_kms_update_states_sync
after a GPU has been unplugged leading to a NULL pointer deref causing
a crash.
This commit fixes this by checking for NULL and clearing the current_state
when NULL is returned.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
Before this commit meta_kms_crtc_read_state was overwriting the
entire MetaKmsCrtcState struct stored in crtc->current_state including
the gamma (sub)struct.
This effectively zero-s the gamma struct each time before calling
read_gamma_state, setting the pointers where the previous gamma values
were stored to NULL without freeing the memory. Luckily this zero-ing
also sets gamma.size to 0, causing read_gamma_state to re-alloc the
arrays on each meta_kms_crtc_update_state call. But this does mean that
were leaking the old gamma arrays on each meta_kms_crtc_update_state call.
This commit fixes this by making meta_kms_crtc_read_state only overwrite
the other values in the MetaKmsCrtcState struct and leaving the gamma
sub-struct alone, this will make read_gamma_state correctly re-use the
gamma tables if the gamma table size is unchanged; or re-alloc them
(freeing the old ones) if the size has changed, fixing the memory leak.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
The "device-added" signal should use g_cclosure_marshal_VOID__OBJECT not
g_cclosure_marshal_VOID__VOID.
Instead of fixing this manually, simply replace the closure function for
both signals with NULL, glib will then automatically set the correct
va_marshaller.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
Explicitly checking the dimensions of a mode to determine whether it
should be advertised or not fails for portrait style modes. Avoid this
by checking the area instead.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/722
Similar to gtk commit f507a790, this ensures that the valist variant of
the marshaller is used. From that commit's message:
```
If we set c_marshaller manually, then g_signal_newv() will not setup a
va_marshaller for us. However, if we provide c_marshaller as NULL, it will
setup both the c_marshaller (to g_cclosure_marshal_VOID__VOID) and
va_marshaller (to g_cclosure_marshal_VOID__VOIDv) for us.
```
https://gitlab.gnome.org/GNOME/mutter/merge_requests/697
By putting `NULL` as the C marshaller in `g_signal_new`, you
automatically get `g_cclosure_marshaller_generic`, which will try to
process its arguments and return value with the help of libffi and
GValue.
Using `glib-genmarshal` and valist_marshallers, we can prevent this so
that we need less instructions for each signal emission.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/697
This is important when using a touchscreen or stylus instead of a mouse
or touchpad. If the cursor only gets hidden and the focus stays the
same, the window will still send hover events to the UI element under
the cursor causing unexpected distractions while interacting with the
touchscreen.
Fix this by emitting a visibility-changed signal from the cursor tracker
which then triggers a focus surface sync and always set the focus
surface to NULL when it's synced while the cursor is hidden.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/448
Allow checking whether the pointer is visible without accessing the
trackers internal is_showing property. While we don't need this just yet
for reading the visibility inside meta-wayland-pointer, it's useful when
implementing the logic to remove Clutter's focus when the cursor goes
hidden later.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/448
COPY_MODE_PRIMARY has two paths, automatically chosen. For debugging purposes,
e.g. why is my DisplayLink screen slowing down the whole desktop, it will be
useful to know which copy path is taken. Debug prints are added to both when
the primary GPU copy succeeds the first time and when it fails the first time.
This is not the full truth, because theoretically the success/failure could
change every frame, but we don't want to spam the logs (even in debug mode)
every frame. In practise, it should be rare for the success or failure to ever
change. Hence, saying what happened on the first time is enough. This does
indicate if it ever changes even once, too, so we know if that unexpected thing
happens.
The debug prints are per secondary GPU since there could be several.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
When the preferred path META_SHARED_FRAMEBUFFER_COPY_MODE_SECONDARY_GPU cannot
be used, as is the case for e.g. DisplayLink devices which do not actually have
a GPU, try to use the primary GPU for the copying before falling back to
read-pixels which is a CPU copy.
When the primary GPU copy works, it should be a significant performance win
over the CPU copy by avoiding stalling libmutter for the duration.
This also renames META_SHARED_FRAMEBUFFER_COPY_MODE_* because the new names are
more accurate. While the secondary GPU copy is always a GPU copy, the primary
copy might be either a CPU or a GPU copy.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
This bit of code was more or less duplicated in meta-renderer-native-gles3.c
and meta-wayland-dma-buf.c. Start consolidating the two implementations by
moving the *-gles3.c function into meta-egl.c and generalizing it so it could
also accommodate the meta-wayland-dma-buf.c usage.
The workaround in the *-gles3.c implementation is moved to the caller. It is
the caller's responsibility to check for the existence of the appropriate EGL
extensions.
Commit 6f59e4858e worked around the lack of
EGL_EXT_image_dma_buf_import_modifiers with the assumption that if the modifier
is linear, there is no need to pass it into EGL. The problem is that not
passing a modifier explicitly to EGL invokes implementation-defined behaviour,
so we should not have that workaround in meta-egl.c.
This patch intends to be pure refactoring, no behavioral changes. The one
change is the addition of g_assert to catch overwriting arbitrary memory.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Since 4cae9b5b11, and indirectly before that as well, the
MetaMonitorManager::power-save-mode-changed is emitted even
when the power save mode didn't actually change.
On Wayland, this causes a mode set and therefore a stuttering.
It became more proeminent with the transactional KMS code.
Only emit 'power-save-mode-changed' when the power save mode
actually changed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/674
We need to set XdndAware and XdndProxy on the stage window if running
a X11 compositor, this is not necessary on wayland.
Takes over gnome-shell code doing this initialization.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/667
