Operate on MetaMonitor's instead of MetaOutput's, as the latter may be
only a subset of an actual "monitor" when referring to the physical
computer equipment.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
When a logical monitor constains monitors with different subpixel
ordering, make the wl_output have the subpixel order 'unknown' so that
clients don't make assumptions given only a subset of the monitors of
the given region.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Don't try to mirror the physical dimension, since that's a property of
one of the monitors, not of the logical monitor. Callers are changed to
deal with choosing the monitor to represent the logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of storing the logical monitors in an array and having users
either look up them in the array given an index or iterate using
indices, put it in a GList, and use GList iterators when iterating and
alternative API where array indices were previously used.
This allows for more liberty regarding the type of the logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Move the last piece of monitor grid getter API to the monitor manager
away from MetaScreen. The public facing API are still there, but are
thin wrappers around the MetaMonitorManager API.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Turning a rectangle into a logical monitor also has nothing to do with
the screen (MetaScreen) so move it to MetaMonitorManager which has that
information.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Let the backend initialize the cursor tracker, and change all call
sites to get the cursor tracker from the backend instead of from the
screen. It wasn't associated with the screen anyway, so the API was
missleading.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
It checks whether a surface is on a given "logical monitor", not
output. Output here is the Wayland name for the same thing, but should
not be confused with MetaOutput.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In preparation for further refactorizations, rename the MetaMonitorInfo
struct to MetaLogicalMonitor. Eventually, part of MetaLogicalMonitor
will be split into a MetaMonitor type.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Use the proposed EGL_WL_wayland_eglstream EGL extension instead of the
file descriptor hack that was used as a temporary solution.
Note that this results in EGL clients will no longer work if they are
running on a Nvidia driver with a version older than 370.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Instead of having a way to determine the type of a buffer, add a
realization step that implicitly detects the buffer type. This makes it
possible to both realize (i.e. creating needed objects from the buffer)
and determine the type at the same time, which may be the only possible
way (for example, the only way to know whether a buffer is a EGLStream
is to create the EGLStream from it).
https://bugzilla.gnome.org/show_bug.cgi?id=773629
When the monitor the surface is on has a scale other than 1, the
coordinate of the window menu popup position needs to be scaled, as it
is reported in logical pixels, while the stage is still in physical
pixels.
https://bugzilla.gnome.org/show_bug.cgi?id=776055
A window manager must select the SubstructureRedirect mask on the root
window to receive the MapRequest from the X11 clients and manage the
windows. Without this event mask set, a window manager won't be able to
map any new window.
The Wayland selection code in mutter can change/clear the event mask on
the requestor window from a XSelectionRequest event when the window is
not managed by mutter/gnome-shell.
A rogue or simply buggy X11 client may send a XConvertSelection() on the
root window and mutter will happily change/clear its own event mask on
the root window, effectively turning itself into a regular X11 client
unable to map any new X11 window from the other X11 clients.
To avoid this, simply check that the requestor window is not the root
window prior to change/clear the event mask on that window.
https://bugzilla.gnome.org/show_bug.cgi?id=776128
Commit 5eb5f72 - wayland: Check surface outputs after mapped state
changes connected the ::mapped signal handler, we need to disconnect it
on destroy to avoid a possible assertion failure in
update_surface_output_state()
https://bugzilla.gnome.org/show_bug.cgi?id=776036
Commit 4295fdb892 made us skip focusing
all xdg_popups instead of just non-grabbing ones as intended. This
means that when unmanaging a window we might select a xdg_popup window
to focus (in meta_stack_get_default_focus_window() ) but then since we
don't actually focus it we go on unmanaging the focused window which
triggers an assertion, as it should.
To avoid this and still fixing bug 771694 we can make use of the
MetaWindow->input property for non-grabbing xdg_popup windows since
their semantics, in this regard, are the same as no input X11 windows.
This way, when unmanaging a focused window while a xdg_popup is up,
we'll either give focus to the xdg_popup or not select the popup at
all to be focused if it's non-grabbing.
https://bugzilla.gnome.org/show_bug.cgi?id=775986
This reverts commit 989ec7fc60.
We now rely on accurately knowing if a window moved and/or resized in
meta_window_move_resize_internal() so the wayland implementation can't
lie any longer.
https://bugzilla.gnome.org/show_bug.cgi?id=770345
This commit adds for a new type of buffer being attached to a Wayland
surface: buffers from an EGLStream. These buffers behave very
differently from regular Wayland buffers; instead of each buffer
reperesenting an actual frame, the same buffer is attached over and
over again, and EGL API is used to switch the content of the OpenGL
texture associated with the buffer attached. It more or less
side-tracks the Wayland buffer handling.
It is implemented by creating a MetaWaylandEglStream object, dealing
with the EGLStream state. The lifetime of the MetaWaylandEglStream is
tied to the texture object (CoglTexture), which is referenced-counted
and owned by both the actors and the MetaWaylandBuffer.
When the buffer is reattached and committed, the EGLStream is triggered
to switch the content of the associated texture to the new content.
This means that one cannot keep old texture content around without
copying, so any feature relying on that will effectively be broken.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Add support for inverted Y Wayland buffers. OpenGL textures are by
default inverted, so adding support for EGL_WAYLAND_Y_INVERTED_WL
effectively means adding support for non-inverted, which makes the
MetaShapedTexture apply a transformation when drawing only when querying
EGL_WAYLAND_Y_INVERTED_WL resulted in the response "EGL_FALSE".
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Don't rely on the Cogl layer having Wayland specific paths by
determining the buffer type and creating the EGLImage ourself, while
using the newly exposed CoglTexture from EGLImage API. This changes the
API used by MetaWaylandSurface to make the MetaWaylandBuffer API be
aware when the buffer is being attached. For SHM and EGL buffers, only
the first time it is attached will result in a new texture being
allocated, but later for EGLStream's, more logic on every attach is
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Similarly to Weston (where this code originated), there were two errors
in the X11 lockfile handling.
Firstly, after reading 11 characters from the lock file (which could
have been placed by any process), there was no guarantee of
NUL-termination, meaning strtol could've theoretically run off the end
of the string.
Secondly, whilst writing the new lock, the trailing NUL byte was not
correctly accounted for. The size passed as an input to snprintf takes
the maximum size of the string including the trailing NUL, whilst the
return (and the input to write) gives the actual size of the string
without the trailing NUL.
The code did attempt to check the return value, however snprintf returns
the size of the _potential_ string written, before snprintf culls it, so
this was off by one, and the LF was not being written.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=774613
Stylus configuration (stylus buttons, pressure) was handled
at the very high level, doing the button and pressure translations
right before sending these to wayland clients.
However, it makes more sense to store these settings into the
ClutterInputDeviceTool itself, and have clutter apply the config
at the lower level so 1) the settings actually apply desktop-wide,
not just in clients and 2) X11 and wayland may share similar
configuration paths. The settings are now just applied whenever
the tool enters proximity, in reaction to
ClutterDeviceManager::tool-changed.
This commit moves all handling of these two settings to
the clutter level, and removes the wayland-specific paths
https://bugzilla.gnome.org/show_bug.cgi?id=773779
And remove the wayland-specific handling. This works for both Wayland and
X11 (provided the compositor receives pad events through a passive grab
there).
https://bugzilla.gnome.org/show_bug.cgi?id=773779
The keyboard focus semantics for non-grabbing xdg_shell v6 popups is
pretty undefined.
Same applies for subsurfaces, but in practice, subsurfaces never receive
keyboard focus, so it makes sense to do the same for non-grabbing
popups.
https://bugzilla.gnome.org/show_bug.cgi?id=773210
We shouldn't cancel the pointer grab when there is a compositor grab,
since that'd break things like drag-n-drop via the overview and
alt-tabs.
The original reason for cancelling the pointer grab on compositor grabs
was to avoid a re-entry when a compositor grab was activated while
there was an active pointer constraint grab. The re-entry would happen
when the compositor grab cleared the pointer focus. Clearing the focus
would trigger the pointer constraint to be deactivated, which would end
its grab. Ending the grab would reset the grab to the default one, which
could focus the same surface again, triggering the constraint to
re-enable before it finished disabling.
This is now avoided because the default grab handler is now aware of
compositor grabs, and won't override the cleared pointer focus until
the compositor grab ends.
https://bugzilla.gnome.org/show_bug.cgi?id=772914
Teach the default grab about compositor grabs (i.e.
display->event_route) so that it can avoid setting a pointer focus when
after the compositor grab actively unset the pointer focus.
https://bugzilla.gnome.org/show_bug.cgi?id=772914
When disabling the device/capability, we can't rely on cancelled events
being emitted timely, because the capability will be already disabled by
then, all touches must be cancelled immediately then.
https://bugzilla.gnome.org/show_bug.cgi?id=772929
When the monitor is scaled (i.e. HiDPI scaling) the placement coordinates
ere still in unscaled xdg_surface window geometry coordinate space when
used to place the window. Fix this by scaling the coordinates by the
monitor scale of the parent toplevel window before using them.
https://bugzilla.gnome.org/show_bug.cgi?id=771841
As meta_window_place_with_placement_rule will trigger a configure event
being sent ensure that the popup is placed on the correct monitor first
to ensure the right scale factor is applied.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
https://bugzilla.gnome.org/show_bug.cgi?id=771841
Directly set the monitor of the toplevel window for the popup to avoid
the change not being applied due to later constraints calculation.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
https://bugzilla.gnome.org/show_bug.cgi?id=771841
Always use the monitor of the toplevel surface's window, so that the
popup menu and the parent will always have the same scale. This fixes
the dimensions sent in the xdg_popup configure event.
https://bugzilla.gnome.org/show_bug.cgi?id=771841
When Xwayland confines, the surface dimensions will include the server
side window manager decorations. We don't want the decorations to be
included in the constraint region so intersect the calculated input
region with the parts of the buffer rect that is not part of the window
frame.
https://bugzilla.gnome.org/show_bug.cgi?id=771859
Put the conditions for enabling a pointer constraint in a helper
function, and use that in both maybe_enable() and maybe_remove(). The
constraint region checking is still only done in maybe_enable()
however.
This changes the conditions for maybe disabling the constraint on focus
change and other trigger points, namely it makes constraints by Xwayland
not disable when they shouldn't due to the constraining window being an
override-redirect window.
https://bugzilla.gnome.org/show_bug.cgi?id=771859
When the grab is cancelled, for example because of an Alt-tab, VT
switch etc, disable or remove (depending on the constraint type) the
constraint. This avoids a re-entry issue when the focus is returned and
the focus listener tries to re-enable a disabled constraint.
https://bugzilla.gnome.org/show_bug.cgi?id=771859
Dismiss the popup when the grab is cancelled, so that if the grab is
ended for whatever reason (such as VT switching or the last pointer
being disconnected), it doesn't try to end the grab when it isn't
active.
This fixes a crash when VT switching back and forth while a popup grab
is active.
https://bugzilla.gnome.org/show_bug.cgi?id=771858
Previously a grab could suddenly end without the grabber knowing
anything about it. Some grabs assume they won't suddenly end without
notice, and can use then new 'cancel' vfunc to be notified.
Currently a grab is cancelled when a new one is started (i.e. in
meta_wayland_pointer_grab_start()), when a non-popup compositor wide
event route is initiated, and when the seat looses the pointer
capability.
https://bugzilla.gnome.org/show_bug.cgi?id=771858
Instead of using meta_wayland_pointer_end_grab() which focuses the new
grab, add a new helper mean to be used to reset the grab state without
changing the pointer focus. When using this function, the call site is
supposed to explicitly manage focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Make the caller of focus setting check whether there is a pointer to
update the focus state of. It makes it more obvious what to expect, as
the call would be a no-op in when no pointer is present.
Grabbing is still allowed without the presence of a pointer because it
is used by popups even on touch-only systems.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Make the caller of focus setting and grab starting check whether there
is a keyboard to update the focus state or start grabbing. It makes it
more obvious what to expect, as the call would be a no-op in when no
keyboard is present.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
The variable name 'l' usually refers to a GList iterator, but here it's
just a short hand for a specific list. Stop using this shorthand, since
it just makes it harder to read what list is used.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
In order to kill a window, on both X11 and wayland we first try to
kill(3) the corresponding process, so we can add the newly added
get_client_pid() method to share that code.
https://bugzilla.gnome.org/show_bug.cgi?id=772613
It is often useful to identify the client process that created
a particular window, however the existing meta_window_get_pid()
method relies on _NET_WM_PID, which is only available on X11 and
depends on applications to set it correctly (which may not even
be possible when the app runs in its own PID namespace as Flatpak
apps do). So add a get_client_pid() method that uses windowing
system facilities to resolve the PID associated with a particular
window.
https://bugzilla.gnome.org/show_bug.cgi?id=772613
Previously the focus was reset implicitly by a memset() on the whole
MetaWaylandPointer struct. When MetaWaylandPointer was turned into a
GObject, this was not possible any more, and the focus was not updated
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
There may be other windows managing selection whose events are seen in
our GDK event filter, like st-clipboard in gnome-shell, we should in
that case not interfere on Selection/SelectionRequest events that are
not meant for us.
This fixes an odd feedback loop where requesting clipboard contents from
wayland results in a XConvertRequest call and a SelectionRequest event
that is interpreted by mutter as a request from another X11 client, so
the current data source is poked for content, which happens to be the
X11 bridge, which does a XConvertRequest to get contents... This is only
broken after the many nested async operations create enough pipes and
cancellables to run out of fds.
Adding checks to ensure only events meant to our "selection owner"
window are managed prevent this unintended loop to happen in the first
place.
https://bugzilla.gnome.org/show_bug.cgi?id=760745
A xdg_popup, when active, always has a parent surface. However, a popup
created may immediately become invalid, for example when it is not
granted a grab, in which case it won't be assigned a parent since it
will never be mapped.
This case needs to be handled elsewhere, as one cannot assume a
MetaWaylandXdgPoup that is processed (via wl_surface commit handling
etc) will have a parent_surface.
https://bugzilla.gnome.org/show_bug.cgi?id=771495
If a X11 client would initiate a Xdnd session after it had lost pointer
focus (for example when the Xdnd event starting the drag happens after
the implicit pointer grab is already broken due to the button being
released), just end the drag operation instead of dereferencing the
non-existing focus surface.
Also avoid using a native Wayland surface as a drag origin, as that can
never happen, but allow any arbitrary Xwayland client, since there is
no way to find out the actual drag origin.
https://bugzilla.gnome.org/show_bug.cgi?id=770940
We cannot check 'has-target' or 'has-seat' when verifying a
wl_data_offer.finish request is valid or not, since the source may have
effected 'has-target' or whether theh source has a seat or not when the
finish request was already on the wire.
Instead of checking against the source state, keep track whether the
required operations has been done on the offer in question (i.e.
whether an action has been sent, or a mime type been accepted).
This fixes incorrectly raised error when dragging from gtk+'s testdnd
via Xwayland onto gtk+'s testdnd using Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=770937
Since wl_surface.set_buffer_transform() is not supported, until it is
added, pretend outputs are never transformed, so that clients are less
likely to attach pre-transformed buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=770672
Also maybe remove a constraint when the pointer focus changes. This is
needed because when Xwayland has a constraint focus may change, the
constraint object will not receive a 'appears-focused' event on its
window since it never changed.
This happens for example when an override-redirect window (which never
appears focused) holds the constraint, and alt-tab happens. In this case
focus changes, but from the constraint's point of view, none of the
windows it knows about changed its focus appearance.
https://bugzilla.gnome.org/show_bug.cgi?id=771345
Instead of initializing the default grab when the device class is
enabled, initialize it on object initialization. This way other device
classes can still grab the pointer, as if there was one. This may be
useful for example if a touch grab is active and a mouse is connected.
This also makes it possible for popup grabs, which currently use a
pointer grab for controlling, to be triggered by touch devices, while
still holding an active pointer grab.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Make the device <-> seat association permanent, and move it into
MetaWaylandInputDevice. A device will never be disassociated with a
seat, so there is no point in unsetting it.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Add a new object class, MetaWaylandInputDevice, and make all device
classes (pointer, keyboard, touch) inherit it. In the future common
functionality may be placed there.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Meant to replace explicitly checking whether a
MetaWaylandPointer/MetaWaylandKeyboard/MetaWaylandTouch has a seat or
not to determine whether they are supposed to be active or not.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Since Xwayland surface constraints might need to enable not only
because the constrained window appears focused, add a pointer focus
listener and try constrain whenever the pointer focus changes. It's
still required that a Xwayland window is focused to activate.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Xwayland surfaces are special, because there is no reliable way to
associate a window with its corresponding "application window" (the one
which was given focus). Many games that require pointer warping and
confining pointer grabs may for example create override redirect windows
and make that window receive input even though it will never be the
focus window.
Therefore, the requirements for enabling a constraint for a wl_surface
from Xwayland needs to be relaxed in order. This commit changes
Xwayland wl_surfaces to not require being focused to be enabled; it'll
be enabled as long as any X11 window is the one with focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Require pointer focus to enable, otherwise we can't guarantee it has
entered the surface, as the focus may have been given to a subsurface,
override-redirect or other sub window covering the surface that was
requested to have o pointer constraint.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Add a signal that is emitted when the pointer focus surface of the
pointer device changes. This will later be used by the pointer
constraints to maybe enable pointer constraints when a surface receives
pointer focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
For Xwayland, a newly created wl_surface and X11 Window pair may not be
immediately associated, but Xwayland may still request a pointer
constraint on some of its wl_surface's. Handle the situation by
postponing maybe enabling the constraint until the window and surface
has been associated.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Move the MetaWaylandSurface::destroy signal before starting the actual
destruction, in wl_surface_destructor, so that all fields (e.g. surface
role) are intact when the listeners are invoked.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
When the Xwayland wl_surface is created, it may not yet be possible to
associate it with the corresponding X11 Window. Add a signal to the
Xwayland role to communicate with any interested parties.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
If a client would attach a buffer to a surface, commit, destroy the
buffer and then later set the surface as a cursor, there will be no
wl_buffer available to be used by the cursor role. Instead of
dereferencing the non-existing wl_buffer resource, handle this situation
by logging a warning and treating a prematurely destroyd wl_buffer as if
no buffer had been attached.
https://bugzilla.gnome.org/show_bug.cgi?id=770992
Implement min/max size request from xdg-shell-v6 and plug it into the
existing code so that windows with fixed size cannot be tiled/maximized
in Wayland just like in X11.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=770226
The seat capability updating is synchronous, but input events are
asynchronous (first queued then emitted). This means we may end up in a
situation where we from libinput first may receive a key event,
immediately followed by a device-removed event. Clutter will first
queue the key event, then remove the device, immediately triggering the
seat capability removal.
Later, when the clutter stage processes the queued events, the
previously queued key event will be processed, eventually making it
into MetaWaylandSeat. Before this patch, MetaWaylandSeat would still
forward the key event to MetaWaylandKeyboard, even though it had
'released' it. Doing this would cause referencing potentially freed
memory, such as the xkb state that was unreferenced when the seat
removed the capability.
In order to avoid processing these lingering events, for now, just drop
them on the floor if the capability has been removed.
Eventually, the event queuing etc needs to be redesigned to work better
when used in a Wayland compositor, but for now at least don't access
freed memory.
https://bugzilla.gnome.org/show_bug.cgi?id=770727
We may be assigned multiple times, if the surface is assigned to be a
cursor surface multiple times. Each time e.g. wl_pointer.set_cursor is
called, we'll be assigned.
While the role object exists, we'll handle buffer use count even when
we are not actively assigned, thus we should only handle the initial
assignment use count bump when constructing, so that we don't increase
it when reassigned, where the wl_resource may already have been
released.
https://bugzilla.gnome.org/show_bug.cgi?id=770402
For backend handled cursors, if nothing else changes on the clutter
stage, we end up not sending out frame callbacks since clutter doesn't
draw a new frame.
To fix this, we'll keep cursor surfaces' frame callbacks separate from
other surfaces' and trigger them from the new
MetaCursorRenderer::cursor-painted signal which handles both software
and hardware cursors.
https://bugzilla.gnome.org/show_bug.cgi?id=749913
If cogl fails to create a texture from the client's given buffer,
mutter would raise a fatal error and terminate.
As a result, a broken client might kill gnome-shell/mutter and take the
entire Wayland session with it.
Instead of raising a fatal error in this case, log the cogl error
message and send the client an OOM error, so mutter/gnome-shell can
survive an unsupported buffer size.
https://bugzilla.gnome.org/show_bug.cgi?id=770387
Windows from Xwayland still needs to use the Wayland path, but is
represented an MetaWindowX11, thus the abstraction introduced in
"window: Make meta_window_has_pointer() per protocol implemented"
is wrong. Lets turn back time, and reconsider how this can be
abstracted more correctly in the future.
This reverts commit 9fb891d216.
