Since we now listen to the "stage-views-on-changed" signal (which
"catches" all the changes we want) on MetaWaylandActorSurfaces for
updating the wl_outputs the surface is on, we no longer need to call
meta_wayland_surface_update_outputs_recursively() on all geometry
changes, so remove that signal handler.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
ClutterActors new "stage-views-changed" signal fits pretty well for the
updating of wl_outputs a MetaWaylandActorSurface is on: With that signal
we get notified if the surface moved to a different CRTC, of which every
output has at least one.
So start listening to that signal, which fixes a bug where the wl_output
of a surface changes, but its allocation remains the same (which means
no signals triggering an update of the outputs will be emitted) and no
enter/leave events for the new wl_outputs are sent to the client. This
can happen when a monitor is hotplugged but the new allocation is
exactly the same as the old one even though it's on a different monitor.
Since the "stage-views-on-changed" signal will also get emitted when a
parent actor of the surface is moved, this means we can now remove the
call to meta_wayland_surface_update_outputs_recursively() on window
position changes or the completion of window-effects.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
QXL doesn't support mmap():ing a DMA buffer allocated in mutter inside
the PipeWire stream consumer process. To make screen casting work again
on QXL, disable DMA buffer based screen casting for QXL.
Eventually, it should be the client that renegotiates the supported
buffer types, but until then we need this list.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1318
The X server, including Xwayland, can be compiled with different X11
extensions enabled at build time.
When an X11 extension is built in the X server, it's usually also
enabled at run time. Users can chose to disable those extensions at run
time using the X server command line option "-extension".
However, in the case of Xwayland, it is spawned automatically by the
Wayland compositor, and the command line options are not configurable
by users.
Add a new setting to disable a selected set of X extension in Xwayland
at startup, without needing to rebuild Xwayland.
Of course, if Xwayland is not built with a given extension support in
the first place (which is the default for the security extension for
example), that option has no effect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1405
Delay the addition and removal of devices using ClutterDeviceEvent's so that
they are processed following the libinput event order, and that we don't
have to flush the events on removal.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
When a device is removed from the seat the events that this device may have
emitted just before being removed might still be in the stage events queue,
this may lead a to a crash because:
Once the device is removed, we dispose it and the staling event is
kept in queue and sent for processing at next loop.
During event processing we ask the backend to update the last device
with the disposed device
The device is disposed once the events referencing it, are free'd
The actual last device emission happens in an idle, but at this point
the device may have been free'd, and in any case will be still disposed
and so not providing useful informations.
To avoid this, once a device has been added/removed from the seat, we queue
ClutterDeviceEvent events to inform the stack that the device state has
changed, preserving the order with the other actual generated device events.
In this way it can't happen that we emit another event before that the
device has been added or after that it has been removed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1345
Clutter device events are special events coming from the backend when an
input device is added or removed.
When such events are processed, we should make the seat to handle them by
calling vfunc that can be implemented by each backend and eventually
emitting the appropriate signal.
If a device is removed, we can also safely dispose it, as it can be
considered stale at this point.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
Add clutter device added and removed events to allow processing of them as
it happens in the backends, queuing them and performing actions in order.
This allows not to loose any event that is performed just before removing or
disabling a device, and still process the events in order in the event
queue.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
When removing a device that has been just marked as the last in use, we may
try to notify that a NULL device is the last one.
This is not supported, as both update_last_device() and the clients of the
"::last-device-changed" signal are assuming that the last device is always
a valid ClutterInputDevice.
So let's avoid erroring, and stop the idle when clearing the current device.
Related to: https://gitlab.gnome.org/GNOME/mutter/-/issues/1345https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
A GAppInfo is not guaranteed to have a filename or an application (or
rather a desktop ID). Add a check for application_id to be non-NULL
before trying to call sn_launcher_set_application_id, which would crash
otherwise.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1392
PipeWire reuses buffers, and buffer metadatas, when streaming. When
the cursor is moved to outside the stream, the cursor meta also needs
to be updated, otherwise it'll use the cursor position of whatever is
in the buffer.
Don't bail out when cursor is outside the stream, and ensure to record
a metadata-only frame. This only applies to metadata streams.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1417
If we returned early in one of the checks but already assigned the
surface role, we'd later run into a double-free and crash. Just do
the checks at the beginning.
Also add a missing return statement that was left out in commit
88ff196fe3 and tighten the parent surface check.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1415
The spec allows `parent_resource` to be `NULL`, requiring the parent
surface to get specified by some other protocol. Send a protocol error
with some meaningful explanation instead of crashing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1408
Currently, the maximum size for a mouse pointer bitmap for screen
casting is 64x64 pixels.
However, this limit is hit way too often as it is way too low and
results in crashes in either gnome-remote-desktop or mutter.
For example: The a11y settings in g-c-c allow setting a larger pointer
bitmap in order to increase the visibility of the mouse pointer.
With the current limit of 64x64 pixels it is not possible to use the
larger variants of the default mouse pointer bitmap, without
experiencing any crash.
Another way to hit the limit is when display scaling is used or some
game uses a custom (large) mouse pointer bitmap.
The VNC backend in gnome-remote-desktop does not seem to have a maximum
pointer bitmap size.
The RDP backend on the other hand has a maximum pointer bitmap size at
384x384.
Use this size (384x384) as maximum size instead of the current 64x64
size for mouse pointer bitmaps to avoid crashes in mutter and
gnome-remote-desktop and to ensure that bigger mouse pointer bitmaps
can be used.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1414
It is linear config manager created when ensuring configuration.
However, the switch config is not set as LINEAR, but left as UNKNOWN.
This leads switch mode OSD always shows "Join Displays" icon, rather
than the next icon which is "External Only" after connect an external
display and press Super+P once at first time since mutter starts.
This patch moves switch config setting into
meta_monitor_config_manager_create_linear() (and the sibling functions)
to well prepare the monitors config and avoid missing settings.
This is a regression introduced by 149e4d6934.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1362
Clients can set minimum and maximum to identical values to indicate a
fixed-size window. A compositor can ignore these requests and thus a client
has to ensure these limits.
To support clients that do not ensure these size limits by themselves and
to skip unnecessary function calls, we will prevent resizing requests by
the client if a fixed-size has been requested.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1331
