A actor surface may be reset by an xdg_toplevel if a NULL buffer is
attached. This should reset the actor state of the toplevel to an empty
state, while unmapping the previous actor. Subsurfaces, however, should
stay intact, including their relationship to the toplevel. They should
also not be yanked away from the actor of the actor surface prior to it
resetting, so that a window-destroy animation can include the subsurface
actor.
This fixes a potential crash when a subsurface tries to commit to its
wl_surface after the destroy animation of the toplevel has finished, as
the actor would at that point have been destroyed and cleared from the
actor surface struct, causing a segmentation fault.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/961
Similar to wl_list_foreach(), add
META_WAYLAND_SURFACE_FOREACH_SUBSURFACE() that iterates over all the
subsurfaces of a surface, without the caller needing to care about
implementation details, such as leaf nodes vs non-leaf nodes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/961
While it's not very relevant now, as we would rarely create it anyway
since the buffer nor texture never changes for a surface, it will be in
the future, as the actor state (including its content,
MetaShapedTexture) will be synchronized by the MetaWaylandActorSurface
at a later point in time, and not by MetaWaylandSurface, at state
application time.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/961
The method `relative_motion_across_outputs` is used to adjust the
distance/delta of a mouse movement across multiple monitors to take the
different scale factors of those monitors into account. This works by
getting the adjacent monitors that the movement-line/vector intersects
with and adjusting the final position (or end point of the
movement-line) by multiplying the parts of the line spanning across
different monitors with the scale factors of those monitors.
In the end of this calculation, we always want to set the new end
coordinates of the relative motion to the new end coordinates of the
adjusted movement-line. We currently only do that if all adjacent
monitors the line is crossing actually exist, because only then we end
up inside the "We reached the dest logical monitor" else-block and set
`x` and `y` to the correct values. Fix that and make sure the returned
values are also correct in case an adjacent monitor doesn't exist by
adding separate `target_x` and `target_y` variables which we update during
each pass of the while loop so we're always prepared for the while loop
exiting before the destination monitor was found.
Thanks to Axel Kittenberger for reporting the initial bug and tracking
the issue down to `relative_motion_across_outputs`.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/774
Some ClutterOffscreenEffect subclasses, such as ClutterBrightnessContrastEffect,
early-return FALSE in pre-paint before chaining up. It's an important optimization
that avoids creating or updating the offscreen framebuffer.
However, if an offscreen framebuffer already exists by the time pre-paint fails,
it will be used *without* repaint the actor over it. That causes an old picture
of the actor to be displayed.
Fix that by always clearing the offscreen framebuffer when pre-paint fails.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/810https://gitlab.gnome.org/GNOME/mutter/merge_requests/992
When changing the 'enabled' property and disabling the offscreen effect,
it doesn't make sense to preserve the offscreen framebuffer. It's not
drawing, after all.
Furthermore, because ClutterOffscreenEffect only checks if the offscreen
framebuffer exists to decide whether or not to redraw, keeping the fbo
alive is a waste of resources.
Clear the offscreen framebuffer when the effect is disabled or enabled.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/810https://gitlab.gnome.org/GNOME/mutter/merge_requests/992
Touch-wise, those are essentially giant touchpads, but have no buttons
associated to the "touchpad" device (There may be pad buttons, but
those are not mouse buttons).
Without tap-to-click/drag, touch in those devices is somewhat useless
out of the box. Have them always enable these features, despite the
setting.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/968
From `meta_cullable_cull_out`:
```
Actors that may have fully opaque parts should also subtract out a region
that is fully opaque from @unobscured_region and @clip_region.
```
As we do no check for the intersection of these two elsewhere in the code,
let's substract from the clip region, too.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/985
FLT_MIN is the smallest *positive* number above 0 that can be
represented as floating point number. If this is used to initialize the
maximum x/y coordinates of a rectangle, this will always be used if all
x/y coordinates of the rectangle are negative. This means that picking
at 0,0 will always be a hit for such rectangles.
Since mutter creates such a window for server side decorations on X11,
this window will always be picked at 0,0 preventing clicking/hovering
the activities button in gnome-shell at that coordinate.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/893
Using the same scale for the window as the
logical monitor only works correctly when having
the experimental 'scale-monitor-framebuffer'
feature enabled.
Without this experimental feature, the stream
will contain a black screen, where the actual
window only takes a small part of it.
Therefore, use a scale of 1 for the non-
experimental case.
Patch is based on commit 3fa6a92cc5.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/976
At this point only the gl driver is at all aware of the difference
between core and compat contexts. COGL_PRIVATE_FEATURE_GL_FIXED is also
now quite misnamed, since we're using the GLSL pipeline even for pre-GL3
contexts. Remove the private feature and handle the few remaining
differences by checking the driver class inside the gl driver.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/973
There's quite a bit of CoglContext that properly belongs to the driver.
Add some hooks to allow the context to create/destroy such state. We
don't have driver-private storage in the CoglContext yet, though we
probably should.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/973
Podman can also be used to create the image. The only thing to keep in
mind with podman is to add --format docker, so that the image will be
compatible with all CI runners.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/966
'xwayland: Do not queue frame callbacks unconditionally' changed the
frame callback behavior of Xwayland surfaces so that they behave the
same way as other actor surfaces (e.g. xdg-shell ones), except for the
case when they are initially assigned.
Remove this special casing as well including the now incorrect comment,
so that the Xwayland surfaces behave the same as the others in this
regard also when assigning.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/964
The vfunc is not called when a surface commits its state, but when the
state is applied. Make this clearer by changing the name to
"apply_state" (and "pre_apply_state").
https://gitlab.gnome.org/GNOME/mutter/merge_requests/907
This changes how asynchronous window configuration works. Prior to this
commit, it worked by MetaWindowWayland remembering the last
configuration it sent, then when the Wayland client got back to it, it
tried to figure out whether it was a acknowledgment of the configuration
or not, and finish the move. This failed if the client had acknowledged
a configuration older than the last one sent, and it had hacks to
somewhat deal with wl_shell's lack of configuration serial numbers.
This commits scraps that and makes the MetaWindowWayland take ownership
of sent configurations, including generating serial numbers. The
wl_shell implementation is changed to emulate serial numbers (assuming
each commit acknowledges the last sent configure event). Each
configuration sent to the client is kept around until the client one. At
this point, the position used for that particular configuration is used
when applying the acknowledged state, meaning cases where we have
already sent a new configuration when the client acknowledges a previous
one, we'll still use the correct position for the window.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/907
