Right now the unmapped signal doesn't always fire which means we didn't
see a surface that's being unmapped in these code paths before. In
particular the resource, window and role can be gone. Handle those
cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3783>
This allows us one less level of indentation of all the tests. It is not
entirely true, the X11 backend test case script can run without it, but
it isn't valuable enough to run without the native backend being enabled
to complicate building.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
Instead of having get_seat_id() handle most cases, and then special
casing another case outside of it, let it handle them all, making all
users just able to call get_seat_id().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
Except the X11 backend test, it still needs an X server. Eventually we
can replace it with the equivalent that uses Xwayland, but that needs a
"scaled down" mutter that runs as the host compositor for Xwayland, that
doesn't expose anything on the session bus.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
It's constructed as a native backend headless backend, but uses a custom
monitor manager (based on MetaMonitorManagerNative) that creates a fake
monitor. Rendering is unconditionally done with the surfaceless
renderer.
The test devices used now use virtual devices, meaning some changes to
the tests to e.g. not set names, and not dealing with input devices
directly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
This is where the viewports are updated, and so lets move connecting the
signal together with it. It also helps a future change to the test
backend where it creates a custom monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
Test touch devices are autocleaned up, but if a test case explicitly
needs it to be removed at a certain point, make sure to also clear the
pointer so that it doesn't get removed twice.
Right now it's harmless, but in a later commit it'll expected to only
remove a device once.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
`update_secondary_gpu_state_post_swap_buffers` decides what our front
buffer object will be. There is only one answer. So return it as the
function result instead of making the caller figure it out.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3830>
It's always equal to `onscreen_native->next_frame` and we can't eliminate
that copy so easily. Removing the parameter removes all ambiguity about
where the next frame will come from.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3829>
Inside the "if (clutter_actor_has_accessible (actor))" condition,
the 'atk_child' variable is set and a signal is emitted on it.
There is a classic ref/unref dance around the signal to guarantee
that 'atk_child' won't be destroyed.
However, this ref/unref dance doesn't work, because the unref is
done *before* the 'atk_child' variable is used again. So if this
was the last reference to it, it would have been destroyed in the
unref call, then used for another signal emission a few lines down.
That's a use-after-free.
Fix that by declaring the 'atk_child' variable with g_autoptr. This
delays the unref until the very end of the function, and is NULL safe.
Also add a sneaky assertion, just for extra safety.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3828>
Starting in mesa 24.1 (good in 24.0.9, bad in 24.1.1), the current
kernel somehow manages to hang our VKMS based tests. Let's update the
kernel so we can bump the CI image without running into those hangs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3826>
When a client wants to lease DRM resources, it will attach the list of
connectors is wants to lease and then submit the request.
Once the request is submitted, destroy the DRM lease request object.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When a new device is connected, register a new global for it.
When a device is gone, remove the global. Upon receiving this event,
the client should destroy any matching wp_drm_lease_device_v1 object.
To destroy a wp_drm_lease_device_v1 object, the client must first
issue a release request. Upon receiving this request, send a released
event and destroy the object.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When the list of connectors available for lease changes send
wp_drm_lease_device_v1.connector events for added connectors and
wp_drm_lease_connector_v1.withdrawn events for removed connectors,
followed by a wp_drm_lease_device_v1.done event.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
After sending the drm_fd event, send zero, one or more connector events.
After all currently available connectors have been sent, send a
wp_drm_lease_device_v1.done event.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
Add meta_kms_impl_device_open_non_privileged_fd() that returns a
non-master file descriptor for a MetaKmsImplDevice.
It'll be required to implement wp_drm_lease_device_v1_send_drm_fd() in a
future commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
The manager keeps track of which connectors are leasable in general,
which connectors and resources are already part of a lease, and keeps
track of when leases get revoked.
When leasing out connectors, the required drm resources to drive the
connectors are included in the lease as well.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When a plane is leased, it is assigned to a CRTC which is leased. When
trying to find a primary plane for a modeset, skip the assigned planes
on leased CRTCs to avoid sharing the resources with the leased process.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
This allows us to keep track when primary and cursor plane assignments
on a CRTC are unassigned. With this commit, all planes which are
assigned are actually in use and can't be assigned to anything else.
We'll make use of that fact when we search for a leasable primary plane.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
The lease_objects function takes connectors, CRTCs and planes which are
turned into a drm lease. The resulting lease can be revoked with
revoke_lease. With list_lessees the currently active leases can be
queried.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
With leasing, we will give another client control over connectors but
they also need a CRTC to drive them. Those CRTCs won't be available to
the desktop/monitor-manager.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
Add an environment variable (MUTTER_DEBUG_LEASE_CONNECTORS) that allows
set a ":" separated list of connector names as available for lease.
The names of the connectors can be found in "/sys/class/drm".
To illustrate it with an example, the names of the connectors and its
status can be fetched with this command:
$ for p in /sys/class/drm/*/status; do con=${p%/status}; echo -n "${con#*/card?-}: "; cat $p; done
DP-1: disconnected
DP-2: disconnected
DP-3: disconnected
DP-4: disconnected
DP-5: connected
DP-6: connected
DP-7: disconnected
eDP-1: connected
HDMI-A-1: disconnected
And, to set "DP-5" and "DP-6" available for lease, the environment
variable can be set like:
MUTTER_DEBUG_LEASE_CONNECTORS=DP-5:DP-6
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
This is intended to be used to filter out what connectors will be
available for lease, i.e. non-desktop ones.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When mutter creates a dma-buf buffer for screencasting, the buffers
stride will, among other attributes, also be defined.
However, mutter currently only sets the buffer stride, when actually
recording a frame, but not when adding it.
This behaviour disallows screencast consumers (clients) to already
import the respective buffer (i.e. for Vulkan creating a VkImage for the
dma-buf image), as the stride is not yet communicated to the client.
Since the stride won't change after adding the respective buffer,
directly set the buffer stride, when adding the PipeWire buffer. This
allows screencast consumers (clients) to do optimizations in their
encoding paths.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3827>
