Flip the switch in using MetaWindowDrag, leaving display grab
ops and a bunch other code unused. Some places checked the grab op
and/or window in complex ways, others just checked for grab existence
and should now look for clutter ones, and others already were already
doing this in addition.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
During grabs, it is expected that the X11 focus does not correspond
to the display's focus window, as focus should be on the stage's
XWindow instead.
This still messes up the keyboard focus even after we stopped moving
the X11 focus, because we end up with a presumed X11 focus window
of None, and as a result the stage is considered unfocused.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5932
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2776>
On the path towards clear ownership chains and always using them to find
other components, do the same for X11 client support paths too.
x11-display: Don't get backend from signleton
x11/selection: Don't get display from singleton
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2718>
As elsewhere, make sure objects that need to have a ownership up to the
context, and use this ownership chain to find relevant components, such
as the backend or the Wayland compositor object instance.
wayland/data-device: Hook up data devices to seats
They are tied to a seat - make that connection in struct fields too, so
that related objects can get to the context via it.
wayland: Don't get Wayland compositor via singleton getter
This means via the ownership chain or equivalent.
xwayland: Hook up manager to Wayland compositor
Same applies to the drag-n-drop struct.
xwayland: Make X11 event handling compositor instance aware
This avoids finding it via singletons in the callee.
xwayland: Don't get Wayland compositor from singleton
xwayland: Pass manager when handling dnd event
window/xwayland: Don't get Wayland compositor from singleton
xwayland/grab-keyboard: Don't get backend from singleton
xwayland: Don't get backend from singleton
wayland: Always get the backend from the context
This means traveling up the ownership chain or equivalent when
necessary.
wayland: Hook up data devices, offers and sources to the compositor
This allows tying them to a context without going through any
singletons.
wayland: Don't get display from singleton
xwayland: Don't get display from singleton
tablet: Don't get display from singleton
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2718>
Store the alarms in a different hashtable, and look up the MetaSyncCounter
right away. It so far avoids the MetaWindow middle man, but will also be
simpler when each window can possibly have more than one active alarms.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175>
Replace the in-process implementation of frames with the external
frames client.
When a client window is created and managed by Mutter, Mutter will
determine whether it is a window that requires decorations and
hint the creation of a frame for it by setting the _MUTTER_NEEDS_FRAME
property on the client window.
After the frames client created a window that has the _MUTTER_FRAME_FOR
property, Mutter will proceed to reparent the client window on the
frame window, and show them as a single unit.
Rendering and event handling on the frame window will be performed by
the external client, Mutter is still responsible for everything else,
namely resizing client and frame window in synchronization, and
managing updates on the MetaWindowActor.
In order to let the frame be managed by the external client, Mutter
needs to change the way some properties are forwarded to the client
and/or frame windows. Some properties are necessary to keep propagating
to the client window only, some others need to happen on the frame
window now, and some others needs to be propagated on both so they
are synchronized about the behavior.
Also, some events that were previously totally unexpected in frame
windows are now susceptible to happen, so must be allowed now.
MetaFrame in src/core/frame.c now acts as the wrapper of foreign
windows created by the frames client, from the Mutter side. Location,
size, and lifetime are still largely in control of Mutter, some
details like visible/invisible borders are obtained from the client
instead (through the _MUTTER_FRAME_EXTENTS and _GTK_FRAME_EXTENTS
properties, respectively).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175>
This check dates all the way back to commit ac2aa5337d. At the time, the
window switcher was an actual X window, that could generate crossing events
if popped up under the pointer. Checking for this kind of crossing events
made sense back at the time in order not to break focus-follows-mouse as
it's been behaving for long.
But now, this UI is all Clutter widgetry, which in the worst case (X11
sessions, of course) it will update the stage window shape to make these
parts clickable. This happens in other places of code that do already
check for ignoring crossing events.
Underneath, this looked up for a Mutter-local GdkWindow of type
GDK_WINDOW_TEMP, only the main MetaFrames window matches those characteristics
nowadays, notably no window switcher popups. Since the remaining window is
never unmapped (until perhaps shutdown), the paths were functionally dead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175>
If the window is not managed, it's weird that it asks for _NET_FRAME_EXTENTS,
it's even weirder that mutter replies with a frame border that would only
apply if the window were managed. Stop doing the latter, and drop the
MetaUI call that calculates borders from the theme settings.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175>
Instead of having users of the test client manually deal with alarm
filters, let the test client automatically add itself as filters. This
changes the MetaX11Display a bit, to handle an array of filters instead
of a single filter.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2704>
Prior to this commit, barriers were created with a MetaDisplay pointer,
despite being entities related and owned by the backend. In the X11
case, it was also not hooked up to the backend X11 connection, but the
clutter one, meaning for example that the logic was active (but dormant)
also for the Xwayland connection.
Fix this by moving X11 barrier management and event processing fully to
the backend. Also replace passing a display pointer with passing a
backend pointer. Keep the display pointer around for a release, but mark
it as deprecated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2442>
The COMPOSITOR_GRAB event route has effectively been replaced by
ClutterGrabs, which are no longer covered by the existing check.
So check for grabs as well to restore the old behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2436>
To find XWayland output that should be the primary one, iterate through all
XWayland outputs, and compare their geometry to the geometry of the primary
logical monitor.
To avoid possible race conditions (Mutter's monitor configuration already
updated, but Xrandr not yet), set the output both after Randr notifications and
after 'monitors-changed' signal.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1407
Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1558>
This is so that cogl-trace.h can start using things from cogl-macros.h,
and so that it doesn't leak cogl-config.h into the world, while exposing
it to e.g. gnome-shell so that it can make use of it as well. There is
no practical reason why we shouldn't just include cogl-trace.h via
cogl.h as we do with everything else.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1059
It might be the case that handling an event induces the stream to
trigger completion, hence removing itself from the list. In that
case we would operate on the no longer valid list element to fetch
the next one.
Keep a pointer to the next element beforehand, so we can tiptoe
over streams that did remove themselves.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/869
Use g_new0 instead of calloc for motif_hints_from_results and adjust
its callers to use g_free.
Note that in the process_request_frame_extents function this replaces
the wrong original mismatch of calloc + XFree with a matching g_malloc +
g_free pair.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/786
The meta_display_update_focus_window() call has indirect dependencies
on the X11 focus window, in order to determine the correct focus window
on the Wayland side (i.e. may turn out NULL with certain X windows).
In order to have the right x11_display->focus_xwindow there, we should
perform first the focus update on the X11 display.
Fixes focusing of Java applications, as those don't seem to go through
_NET_ACTIVE_WINDOW.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/819
If window decoration is modified within a short period of time, mutter
sometimes starts processing the second request before the first
UnmapNotify event has been received. In this situation, it considers
that the window is not mapped and does not expect another UnmapNotify /
MapNotify event sequence to happen.
This adds a separate counter to keep track of the pending reparents. The
input focus is then restored when MapNotify event is received iff all
the expected pending ReparentNotify events have been received.
Signed-off-by: Rémi Bernon <rbernon@codeweavers.com>
https://gitlab.gnome.org/GNOME/mutter/merge_requests/657
Introduce MetaCompositorX11, dealing with being a X11 compositor, and
MetaCompositorServer, being a compositor while also being the display
server itself, e.g. a Wayland display server.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/727
The default configuration of libinput-gestures utility invokes wmctrl to
switch between desktops. It uses wmctrl because this works on both Xorg
and Wayland (via XWayland). Unfortunately, this generates the following
warning message every time, in both Xorg and Wayland desktops:
"Received a NET_CURRENT_DESKTOP message from a broken (outdated) client
who sent a 0 timestamp"
The desktop switch still works fine. The tiny code change here removes
this specific warning because, as the prefacing code comment originally
said and still says, older clients can validly pass a 0 time value so
why complain about that?
I also refactored the "if (workspace)" code slightly to avoid the double
test of the workspace value.
This is submitted for MR
https://gitlab.gnome.org/GNOME/mutter/merge_requests/671.
This code takes care of both setting up X11 selection sources whenever
X11 clients claim selection ownership, and claiming selection ownership
on a mutter X11 window whenever other selection sources claim ownership.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/320
The order and way include macros were structured was chaotic, with no
real common thread between files. Try to tidy up the mess with some
common scheme, to make things look less messy.
Closing a GdkDisplay during an event handler is not currently supported by Gdk
and it will result in a crash when doing e.g. 'mutter --replace'. Using an idle
function will close it safely in a subsequent main loop iteration.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/595
Changes in window decoration result in the window being reparented
in and out its frame. This in turn causes unmap/map events, and
XI_FocusOut if the window happened to be focused.
In order to preserve the focused window across the decoration change,
add a flag so that the focus may be restored on MapNotify.
Closes: #273
- Stop using CurrentTime, introduce META_CURRENT_TIME
- Use g_get_monotonic_time () instead of relying on an
X server running and making roundtrip to it
https://bugzilla.gnome.org/show_bug.cgi?id=759538
