If the EGL header is not new enough, it will not contain that relatively
new macro definition, so to avoid breaking compilation, define it
ourselves for now. Should be possible to remove after some time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2214>
This significantly increases the chance of a fullscreen surface buffer
being scanned out instead of being painted via composition. This is
assuming the client supports the DMA buffer feedback Wayland protocol.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2146>
Whenever a surface is promoted as a scanout candidate by
MetaCompositorNative, it'll get a CRTC set as the candidate CRTC.
When a client asks for DMA buffer surface feedback, use this property to
determine whether we should send a scanout feedback tranche.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1959>
We're in the destructor, it's pointless to unset the userdata as we'll
never ever see a request being invoked with it ever again, since the
resource itself will be destroyed or marked as destroyed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2202>
Most clients nowadays switched to buffer damage, most notably Mesa
and Xwayland. Thus lets avoid the extra cost of allocating three
`cairo_region_t`s and doing some calculations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2168>
If no viewport is set, the neutral viewport is the surface size
without viewport destination size applied - i.e. transform and
scale applied to the buffer size. Change it accordingly, giving
us the same values we'd return in `get_width` in this case.
As result, this only changes cases where a viewport destination
size but no viewport source rectangle is set.
The change fixes exactly such cases, e.g. the Gstreamer Wayland
sink. Can be tested with: `gst-play-1.0 --videosink=waylandsink`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2168>
When Xwayland was not initalized, we'd still clean things up. What this
accidentally meant was that the uninitialized display number 0 was
cleanud up, which very likely was main display of the host session.
What this meant in practice was that /tmp/.X11-unix/X0 was often
removed, causing every Flatpak X11 application to fail to start until
Xwayland was restarted nad the X0 socket file was restored.
Fix this in two ways: firstly only shutdown Xwayland if we ever started
it, i.e. if the X11 display policy was not 'disabled'. This should fix
the issue most of the times. Secondly only clean up the socket if it was
ever initialized. This should fix things if the socket creation failed,
as if it did, the name would be set.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2162>
A popup surface can be remapped multiple times using the same
wl_surface, if a new xdg_popup object is created. To properly handle
this, we need to reset the 'dismissed_by_client' boolean to false, as
otherwise we won't allow new buffer commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1993>
We are using internal API that has the benefit of checking that the
focus surface still matches, but has the drawback that it does not
check the MetaWaylandKeyboard state.
In order to fix this, look for keyboard focus and serial matches
specifically when triggering activation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2148>
Since this signal is in a hot path during input handling, it makes sense
not to have this be a signal at all, currently most of the time spent in
it is in GLib signal machinery itself.
Replace it with a function/user data pair that are set on the sprite
itself. Only the places that create an sprite are interested in hooking
one ::prepare-at behavior per sprite, so we can do with a single pair.
This makes meta_cursor_sprite_prepare_at() inexpensive enough.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
Let the meta_cursor_sprite_realize() function return a boolean value
telling whether there was an actual change in the sprite cursor. E.g.
the surface/icon for it changed in between.
This is used in the native backend to avoid converting/uploading again
the cursor surface.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
Listen to changes in MetaWindow::is-alive, so that the pointer
can logically leave the surface as soon as that happens. This
helps prevent flooding the client socket while it is stalled.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2122>
If we were cancelled, it could mean we teared down, meaning fetching
manager instances will attempt to fetch past freed instances. Handle
this by waiting with the fetching until we know we weren't cancelled.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2140>
This avoids the following crash, that could happen in certain rare race
conditions, e.g. in tests:
0) wl_closure_invoke (closure=0x2fbf9e0, target=0x2e5b3d0, opcode=0)
at ../src/connection.c:1014
1) wl_client_connection_data () at ../src/wayland-server.c:432
2) wl_event_loop_dispatch () at ../src/event-loop.c:1027
3) wayland_event_source_dispatch () at ../src/wayland/meta-wayland.c:104
4) g_main_dispatch () at ../glib/gmain.c:3381
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2127>
A client can create a token without any seat, serial, or surface. In
this case, we'd still try to grab, which would run into some unforseen
code paths, potentially resulting in the following crash:
0) meta_wayland_tablet_seat_device_added (tablet_seat=0x55dff4271c90,
device=0x7f87b80655b0) at
../src/wayland/meta-wayland-tablet-seat.c:200
1) meta_wayland_tablet_seat_new (seat=0x0, manager=0x55dff3ec7b40) at
../src/wayland/meta-wayland-tablet-seat.c:283
2) meta_wayland_tablet_manager_ensure_seat (manager=manager@entry=0x55dff3ec7b40,
seat=seat@entry=0x0) at
../src/wayland/meta-wayland-tablet-manager.c:239
3) meta_wayland_tablet_manager_ensure_seat (seat=0x0, manager=0x55dff3ec7b40) at
../src/wayland/meta-wayland-touch.c:595
4) meta_wayland_seat_get_grab_info (seat=0x0, surface=0x55dff43ff5b0,
serial=0, require_pressed=0, x=0x0, y=0x0) at
../src/wayland/meta-wayland-seat.c:479
5) activation_activate (...) at
../src/wayland/meta-wayland-activation.c:261
Fix this by not trying to grab if not enough parameters was passed when
creating the token. Also add a test case that reproduces the above
crash.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2081>
When an activation times out, we'll be signalled two signals on the
startup sequence object: "timeout", and "complete".
Normally, the "complete" signal is emitted when a startup sequence is
completed succesfully by it being used for activation, and in this case,
the xdg_activation implementation should remove the sequence from the
startup notification machinery.
However, in the timeout case, we should not remove it, as the startup
notification machinery itself will deal with this. If we would, we'd end
up with use-after-free issues, as the sequence would be finalized when
removed the first time.
To avoid this, just clean up the Wayland side in the "timeout" signal
handler, leaving the "complete" signal handler early out if it was
already handled by it.
This avoids crashes like:
0) g_type_check_instance (type_instance=type_instance@entry=0xdd6740)
1) g_signal_handlers_disconnect_matched (instance=0xdd6740, ...)
2) meta_startup_notification_remove_sequence (sn=0x4cc890,
seq=0xdd6740) at
../src/core/startup-notification.c:544
3) startup_sequence_timeout (data=0x4cc890, ...) at
../src/core/startup-notification.c:504
4) g_timeout_dispatch (...) at ../glib/gmain.c:4933
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2081>
The previous code was trying to detect client resizes by only
considering resizes without any pending configurations as client
resizes. There can however be pending configurations that do not involve
resizing, such as ones triggered by state changes. These may also stay
unacknowledged by the client until the next size change. This was
causing client resizes after showing the window (and therefore changing
its status to focused) to not be detected as client resize.
Fix this by checking whether the queue has any configuration with size
changes rather than just whether it is empty.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2023
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2103>
meta_window_wayland_finish_move_resize() is called for both, finishing
a resize that has been requested through/by mutter and for resizes
directly done by the client. This introduces a CLIENT_RESIZE flag to
differentiate the former from the latter. Having this distinction is
required to know what the last requested size by either the client or
mutter is while ignoring older requests that might only have been
applied now.
This excludes client resizes when there are still pending
configurations, because the resize is known to be only temporary.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2066>
This will make clients immediately aware of the output disappearing,
while still allowing for a grace period of 10 seconds for attempting to
bind to it before it turning into a protocol error. This API added as
part of wayland 1.18.
This requires us to not add the output resource to the output resource
list, if the output was made inert. This effectively makes the resource
useless, but that is harmless, since shortly after, the client will
clean it up anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1796>
This will be crucial when we start to remove the global directly when an
output is removed, as that means Xwayland might have removed the output
before we managed to get our queries in.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1796>
We setup Xwayland in an early phase of the X11 display, before we had a
MetaX11Display, and teared down in a couple of places happening when
tearing down the Xwayland integration if the X server died or
terminated. It was a bit hard to follow what happened and when it
happened. Attempt to clean this up a bit, with things being structured
as follows:
* Early during X11 display connection setup, only setup the rudimentary
X11 hooks, being the libX11 error callbacks, and adding the local
user to XHost.
* Move "initialize Xwayland component" code to a new
'x11-display-setup' signal handler. Things setup here are cleaned up
in the 'x11-display-closing' handler.
* Connect to 'x11-display-setup' and 'x11-display-closing' up front,
and stay connected to these two.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1796>
When we use gbm together with the NVIDIA driver, we want the EGL/Vulkan
clients to do the same, instead of using the EGLStream paths. To achieve
that, make sure to only initialize the EGLStream controller when we
didn't end up using gbm as the renderer backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2052>
Quoting the spec for `wl_data_device::drop`:
> If the resulting action is "ask", the action will not be considered
> final. The drag-and-drop destination is expected to perform one last
> wl_data_offer.set_actions request, or wl_data_offer.destroy in order
> to cancel the operation.
We did not respect the action choosen by the drop destination when
it called `wl_data_offer::set_actions` after `wl_data_device::drop`
if a user override was still active. This eventually resulted in
a protocol error in `wl_data_offer::finish`, as the current action
could still be `ask`.
Fix this by only allowing a user override to `ask` before `drop` is
called, thus making sure the final `set_actions` preference is
honored.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1952
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2043>
With each wl_ouitput corresponding to a monitor, the logical monitor is
not part of the MetaWaylandOutput anymore.
Previously, send_xdg_output_events() would compare the old logical
monitor against the new one to determine whether the size and/or
position was changed and should be sent along with the xdg_output
events.
But that logic is now defeated as there is no old/new logical monitor
anymore, so the updated size or location would never be sent again.
Xwayland relies on this information to update its X11 clients and its
own internal root size, without this the X11 screen size and XRandR
information would never be updated.
To avoid that issue, always send the xdg_output size and location on
xdg_output events, Xwayland is smart enough to update its X11 clients
with XRandR only when the layout actually change.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1964
Fixes: bf7c3450 - Make each wl_output correspond to one monitor
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2050>
The extra stage update we schedule in `apply_state()` is mainly
needed in two situations:
- a partial update happened only in obscurred or off-screen parts
of a surface
- a surface requests frame callbacks without having done damage,
notably the (in)famous Firefox vsync implementation.
Commit 0330ce1f15 limited the update to cases when the actor
was mapped, breaking it for Firefox in the overview.
Remove the mapped check again and get the stage from the backend,
restoring previous behaviour.
Fixes 0330ce1f15
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1957
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2034>
A client request for maximizing itself should always be handled by mutter
by emitting a configure event with the native maximized resolution,
regardless of the client's own set limits. This also aligns the behavior by
allowing fixed-sized windows to go into fullscreen or maximized state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1997>
The way wl_seat capabilities work, by notifying clients of capabilities
changes, and clients consequently requesting the relevant interface
objects (pointer, keyboard, touch) is inherently racy.
On quick VT changes for example, capabilities on the seat will be added
and removed, and by the time the client receives the capability change
notification and requests the relevant keyboard, pointer or touch,
another VT switch might have occurred and the wl_pointer, wl_keyboard or
wl_touch already destroyed, leading to a protocol error which kills the
client.
To avoid this, create the objects when requested regardless of the
capabilities.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1797
Related: https://bugzilla.gnome.org/show_bug.cgi?id=790932
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/77>
These are ClutterInputFocus subclasses, so this will trigger reset of
the input method. As the .done event is possibly deferred in the
zwp_text_input_v3 implementation, ensure the changes caused by the
reset are flushed immediately, before the button press is forwarded
to the client by MetaWaylandPointer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1940>
This is more in line with the protocol, and allows us to remove some
awkward code that tries to "combine" different metadata from different
monitors into one, which sometimes meant picking an arbitrary "main"
monitor, or "and" metadata together to find a common ground.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1712>
Before we first created the MetaWaylandCompositor instance, which would
repare Clutter/Cogl so they could initialize and turn on Wayland display
server features, then later to initialize the rest. Now that part is
done by the Wayland infrastructure itself, so we don't need the early
initialization. Simplify things a bit by centralizing it all into a
single meta_wayland_compositor_new() call.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1861>
As with the compositor type enum, also have the X11 display policy enum,
as it's also effectively part of the context configuration. But as with
the compositor type, move it to a header file for enums only, and since
this is a private one, create a private variant meta-enums.h.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1861>
The DRM buffers aren't really tied to mode setting, so they shouldn't
need to have an associated mode setting device. Now that we have a
device file level object that can fill this role, port over
MetaDrmBuffer and friends away from MetaKmsDevice to MetaDeviceFile.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1828>
When the MetaWindow resize machinery for toplevels ended up in the
Wayland window implementation, we tried to avoid configuring
not-yet-mapped windows that just had its zero sized dimension pass
through the constraint machinery, resulting in a 1x1 sized window.
If we'd properly set up the min size metadata earlier, that 1x1 would
likely be the minimum size set of a window, which makes things harder to
predict when peeking at side effects.
However, what the side effect peeking intends to do, as documented in
the comment, was to figure out when the client hadn't committed any
buffer yet, i.e. during the initial map, and in those cases avoid
sending that nasty 1x1 size, resulting in silly window sizes. A more
robust way to detect this is instead checking when we shouldn't really
try resize things our own way, and in those cases early out as was done
before.
This means that, for a yet to me mapped window, we only ever want to
send an initial non-zero configuration when 1) it's initially maximized,
2) initially fullscreen, or 3) initially tiled in any way, as those are
the situations where the compositor is the one deciding the size.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1912>
The cancel phase for swipe gestures was not being handled, hence,
Wayland "end" events where not sent to clients when the gesture was
cancelled.
A swipe gesture is cancelled when extra finger(s) are put down on the
touchpad in the middle of the gesture or when some, but not all, of the
fingers are put up.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1857>
Getting crossing events is necessary between client surfaces while
there is a popup grab in effect (e.g. allow press-drag-release in
menus), we should only stick with the focus surface while the pointer
is outside any client surface.
This partially undoes commit 79050004b0 (or, at least, mutter no
longer fixes the bug it claimed to fix). This will be addressed in
gtk4.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1885>
We first initialized the Wayland infrastructure, then the display, but
on shutdown, we first teared down the Wayland infrastructure, then the
display.
Make things a bit more symmetric and tear down the display before
Wayland. This however means we need to tear down some things Wayland a
bit earlier than the rest. For now this is a separate function, but
eventually, it can be replaced with a signal shared by the backend's
'prepare-shutdown' signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1863>
This way we can initialize without having any way to retrieve it via
some global variable. This isn't needed now, but will be once Wayland
infrastructure initializiation is done in a single step.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1863>
This is especially important as we might end up here when initializing
the Wayland infrastructure. Later that will be done in one step, meaning
the "get_default()" function will not work properly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1863>
It might not be there when shutting down, so get it from a more managed
place. Note that this isn't strictly needed right now, but eventually,
the MetaWaylandCompositor pointer will be cleared using a g_clear*()
helper, which clears the pointer before freeing the instance, which
wouldn't work here.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1863>
This will allow us less awkward startup, where previously we had to
pre-initialize Wayland very early so Cogl could bind the Wayland display
when it initialized. Move things around so we bind the Wayland EGL
display when initializing the rest of Wayland infrastructure.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1863>
The callback on_displayfd_ready() would unconditionally set the return
value to TRUE, regardless of the condition.
Use the GIO condition to determine if there was data written and adjust
the return value accordingly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1851>
