Just as with MetaOutput, instead of the home baked "inheritance" system,
using a gpointer and a GDestroyNotify function to keep the what
effectively is sub type details, make MetaCrtc an abstract derivable
type, and make the implementations inherit it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
Instead of the home baked "inheritance" system, using a gpointer and a
GDestroyNotify function to keep the what effectively is sub type
details, make MetaOutput an abstract derivable type, and make the
implementations inherit it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
It's used for two things: avoid reading configs, and actual hotplug
update mode. The former requires the suggested position to be (-1, -1)
to trick the monitor configuration generator to skip using the suggested
position even if hotplug update mode is set to TRUE. The latter should
use the actual hotplug mode coordinates.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
Now set as a property during construction. Only actually set by the
Xrandr backend, as it's the only one currently not supporting all
transforms, which is the default.
While at it, move the 'ALL_TRANFORMS' macro to meta-monitor-tranforms.h.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
The output info is established during construction and will stay the
same for the lifetime of the MetaOutput object. Moving it out of the
main struct enables us to eventually clean up the MetaOutput type
inheritence to use proper GObject types.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
MetaCrtcInfo and MetaOutputInfo did not represent information about
MetaCrtc and MetaOutput, but the result of the monitor configuration
assignment algorithm, thus rename it to MetaCrtcAssignment and
MetaOutputAssignment.
The purpose for this is to be able to introduce a struct that actually
carries information about the CRTCs and outputs, as retrieved from the
backend implementations.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
That is is_presentation, is_primary, is_underscanning and backlight.
The first three are set during CRTC assignment as they are only valid
when active. The other is set separately, as it is untied to
monitor configuration.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
It was used during configuration to ensure that we always dealt with
every output and CRTC. Do this without polluting the MetaOutput and
MetaCrtc structs with intermediate variables not used by the
corresponding types themself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
Now that we have a proper way to mark our allocation as uninitialized,
make use of that and only disallow implicit transitions of the
"allocation" property if that is the case.
This fixes a bug where easing the allocation of an actor is impossible
when someone queued a relayout on it (or a child of it) before.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1290
We currently initialize the ClutterActorBox of the actors allocation to
zero, but there's a difference between a valid zero-allocation and an
actor having never been allocated. Currently it's impossible for us to
detect the latter case in a reliable way and we use the needs_allocation
flag for this, which may also be set in other situations.
So initialize the allocation of actors to the newly added UNINITIALIZED
ClutterActorBox, which will make it easier to detect whether an actor
already got its initial allocation.
This also fixes another issue right now: Actors which get allocated a
(valid) zero allocation, will now notify the "allocation" property in
this case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1290
Add support for an artificial UNINITIALIZED marking for ClutterActorBox,
done by setting the boxes origin to Infinity and its size to -Infinity.
That is a value that's considered an invalid allocation by Clutter and
which can never be set by sane code.
This will allow setting the allocation of ClutterActors to an
UNINITIALIZED box when creating actors or when removing them from the
scenegraph and makes it possible to explicitely detect uninitialized
allocations, which is useful in a few cases.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1290
The current code assumes that the actor will always have the same
size and position of the background texture, but part of the implicit
contract of being a ClutterContent is being able to render itself
at any given actor, at any given size.
For example, if the current code is given an actor with 0x0+100+100
as geometry, and no clipped region, it'll render not the whole
background, but the 0x0+100+100 rectangle of the background. In
practice, the actor geometry acts like a "clip mask" over the
background texture, due to the assumption that the actor will
always have the same size of the monitor.
Make the calculation of the texture slices relative to the actor
box.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1302
MetaBackgroundActor is still necessary for culling purposes,
but now the actual rendering of the background is delegated
to MetaBackgroundContent, as well as the sizing information.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1302
MetaBackgroundContent is a ClutterContent implementation
that can render a background to any attached actor. Right
now, it preserves all the properties and the rendering
model of MetaBackgroundActor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1302
X11 window stacking operations are by nature prone to race conditions.
For example, we might queue a "raise above" operation, but before it
actually takes place, the sibling the window was to be rased above, is
withdrawn.
In these cases we'd log warnings even though they are expected to
happen. Downgrade these warnings to debug messages, only printed when
MUTTER_VERBOSE is set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1300
Test that the stage-views list of ClutterActor is correct when moving an
actor, reparenting it, or hiding an actor up the hierarchy. Also test
that the "stage-views-changed" signal works as expected.
Don't test actor transforms for now because those aren't supported yet.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
We currently go through the whole tree of mapped actors on every paint
cycle to update the stage views actors are on. Even if no actors need
updating of their stage views, traversing the actor tree is still quite
expensive and shows up when using a profiler.
So tone down the amounts of full-tree traversals we have to do on every
paint cycle and only traverse a subtree if it includes an actor which
actually needs updating of its stage views.
We do that by setting the `needs_update_stage_views` flag to TRUE
recursively for all parents up to the stage when the stage-views list of
an actor gets invalidated. This way we end up updating a few more actors
than necessary, but can avoid searching the whole actor tree for actors
which have `needs_update_stage_views` set to TRUE.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
Add a new signal that's emitted when the stage views an actor being
painted on have changed, "stage-views-changed". For example this signal
can be helpful when tracking whether an actor is painted on multiple
stage views or only one.
Since we must clear the stage-views list when an actor leaves the stage
(actors that aren't attached to a stage don't get notified about the
stage views being changed/replaced), we also emit the new signal when an
actor gets detached from the stage (otherwise there would be an edge
case where no signal is emitted but it really should: An actor is
visible on a stage view, then detached from the stage, and then attached
again and immeditely moved outside the view).
Also skip the comparison of the old stage-views list and the new one if
nobody is listening to the signal to save some resources.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
There are certain rendering techniques and optimizations, for example
the unredirection of non-fullscreen windows, where information about the
output/stage-view an actor is on is needed to determine whether the
optimization can be enabled.
So add a new method to ClutterActor that allows listing the stage-views
the actor is being painted on: clutter_actor_peek_stage_views()
With the way Clutter works, the only point where we can reliably get
this information is during or right before the paint phase, when the
layout phase of the stage has been completed and no more changes to the
actors transformation matrices happen. So to get the stage views the
actor is on, introduce a new step that's done on every master clock tick
between layout and paint cycle: Traversing through the actor tree and
updating the stage-views the mapped actors are going to be painted on.
We're doing this in a separate step instead of inside
clutter_actor_paint() itself for a few reasons: It keeps the code
separate from the painting code, making profiling easier and issues
easier to track down (hopefully), it allows for a new
"stage-views-changed" signal that doesn't interfere with painting, and
finally, it will make it very easy to update the resource scales in the
same step in the future.
Currently, this list is only invalidated on allocation changes of
actors, but not on changes to the transformation matrices. That's
because there's no proper API to invalidate the transformation matrices
ClutterActor implementations can apply through the apply_transform()
vfunc.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
When the stage views the stage is shown on are changed, ClutterStage
currently provides a clutter_stage_update_resource_scales() method
that allows invalidating the resource scales of all actors. With the new
stage-views API that's going to be added to ClutterActor, we also need a
method to invalidate the stage-views lists of actors in case the stage
views are rebuilt and fortunately we can re-use the infrastructure for
invalidating resource scales for that.
So since resource scales depend on the stage views an actor is on,
rename clutter_stage_update_resource_scales() and related methods to
clutter_stage_clear_stage_views(), which also covers resource scales.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
While the layout manager of a ClutterActor does get properly unset when
destroying an actor, we currently forget to disconnect the
"layout-changed" signal from it.
So do that, and while at it, also switch to using the signal id for
disconnecting from the signal instead of
g_signal_handlers_disconnect_by_func(), which caused problems before
because it might traverse the signal handler list.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1281
We currently are confusing g_param_spec_enum and g_param_spec_flags for
the offscreen-redirect property of ClutterActor. Since it's actually a
flag, make it a flag everywhere.
Fun fact: This was already partly done with
d7814cf63e, but that commit missed the
setter.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1292
Just like the ClutterBindConstraint, the ClutterAlignConstraint should
listen to "queue-relayout" of its source actor, not
"notify::allocation". That's because the latter will queue a relayout
during an allocation cycle and might cause relayout loops.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1296
When an app disappears after some data from it has been copied to the
clipboard, the owner of the clipboard selection becomes a new memory
selection source. The initial reference this new selection source is
never unref'ed, which leads to this being leaked on the next clipboard
selection owner change.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1293
Using XDG_CONFIG_HOME allows users to place their keyboard configuration into
their home directory and have them loaded automatically.
libxkbcommon now defaults to XDG_CONFIG_HOME/xkb/ first, see
https://github.com/xkbcommon/libxkbcommon/pull/117
However - libxkbcommon uses secure_getenv() to obtain XDG_CONFIG_HOME and thus
fails to load this for the mutter context which has cap_sys_nice.
We need to manually add that search path as lookup path.
As we can only append paths to libxkbcommon's context, we need to start with
an empty search path set, add our custom path, then append the default search
paths.
The net effect is nil where a user doesn't have XDG_CONFIG_HOME/xkb/.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/936
