This function had two problems. Firstly it would clear the enable
blend flag before calling pre_change_notify so that if blending was
previously enabled the journal would end up being flushed while the
flag was still cleared. Secondly it would call the pre change notify
whenever blending is needed regardless of whether it was already
needed previously.
This was causing problems in test-depth.
This adds a _cogl_bind_gl_texture_transient function that should be used
instead of glBindTexture so we can have a consistent cache of the
textures bound to each texture unit so we can avoid some redundant
binding.
As part of an effort to improve the architecture of CoglMaterial
internally this overhauls how we flush layer state to OpenGL by adding a
formal backend abstraction for fragment processing and further
formalizing the CoglTextureUnit abstraction.
There are three backends: "glsl", "arbfp" and "fixed". The fixed backend
uses the OpenGL fixed function APIs to setup the fragment processing,
the arbfp backend uses code generation to handle fragment processing
using an ARBfp program, and the GLSL backend is currently only there as
a formality to handle user programs associated with a material. (i.e.
the glsl backend doesn't yet support code generation)
The GLSL backend has highest precedence, then arbfp and finally the
fixed. If a backend can't support some particular CoglMaterial feature
then it will fallback to the next backend.
This adds three new COGL_DEBUG options:
* "disable-texturing" as expected should disable all texturing
* "disable-arbfp" always make the arbfp backend fallback
* "disable-glsl" always make the glsl backend fallback
* "show-source" show code generated by the arbfp/glsl backends
_cogl_atlas_texture_blit_begin binds a texture to use as the
destination and it expects it to stay bound until
_cogl_atlas_texture_end_blit is called. However there was a call to
_cogl_journal_flush directly after setting up the blit state which
could cause the wrong texture to be bound. This just moves the flush
to before the call to _cogl_atlas_texture_blit_begin.
This was breaking test-cogl-sub-texture.
1) Always flush when migrating textures out of an atlas because although
it's true that the original texture data will remain valid in the
original texture we can't assume that journal entries have resolved the
GL texture that will be used. This is only true if a layer0_override has
been used.
2) Don't flush at the point of creating a new atlas simply flush
immediately before reorganizing an atlas. This means we are now assuming
that we will never see recursion due to atlas textures being modified
during a journal flush. This means it's the responsibility of the
primitives code to _ensure_mipmaps for example not the responsibility of
_cogl_material_flush_gl_state.
We want to make sure that the material state flushing code will never
result in changes to the texture storage for that material. So for
example mipmaps need to be ensured by the primitives code.
Changes to the texture storage will invalidate the texture coordinates
in the journal and we want to avoid a recursion of journal flushing.
This adds a way to compare two CoglMatrix structures to see if they
represent the same transformations. memcmp can't be used because a
CoglMatrix contains private flags and padding.
THIS IS A WORK IN PROGRESS
Mesa is building a big shader when using ARB_texture_env_combine. The
idea is to bypass that computation, do it ourselves and cache the
compiled program in a CoglMaterial.
For now that feature can be enabled by setting the COGL_PIPELINE
environment variable to "arbfp". COGL_SHOW_FP_SOURCE can be set to a non
empty string to dump the fragment program source too.
TODO:
* fog (really easy, using OPTION)
* support tex env combiner operands, DOT3, ADD_SIGNED, INTERPOLATE
combine modes (need refactoring the generation of temporary
variables) (not too hard)
* alpha testing for GLES 2.0?
The Cogl context has now a feature_flags_private enum that will allow us
to query and use OpenGL features without exposing them in the public
API.
The ARB_fragment_program extension is the first user of those flags.
Looking for this extension only happens in the gl driver as the gles
drivers will not expose them.
One can use _cogl_features_available_private() to check for the
availability of such private features.
While at it, reindent cogl-internal.h as described in CODING_STYLE.
At two places in cogl_wrap_prepare_for_draw it was trying to loop over
the texture units to flush some state. However it was retrieving the
texture unit pointer using w->active_texture_unit instead of the loop
index so it would end up with the wrong state.
Also in glEnableClientState it was using the active unit instead of
the client active unit.
• 3 general fixes (typos, copy/paste),
• ignore cogl-object-private.h,
• cogl_fixed_atani() was in reality cogl_fixed_atan(), fixed in commit
43564f05.
• Fix the cogl-vector section: sections must have a </SECTION> tag at
the end. Also the cogl-vector section was added in the middle of the
cogl-buffer one. Let's shiffle it out and add that </SECTION> tag.
As with a351ff2af earlier, distributing headers generated at configure
time conflicts with out of tree builds as the distributed headers will
be included first instead of including the generated ones.
This provides a mechanism for associating private data with any
CoglObject. We expect Clutter will use this to associate weak materials
with normal materials.
This replaces the use of CoglHandle with strongly type CoglClipStack *
pointers instead. The only function not converted for now is
cogl_is_clip_stack which will be done in a later commit.
This replaces the use of CoglHandle with strongly type CoglBitmap *
pointers instead. The only function not converted for now is
cogl_is_bitmap which will be done in a later commit.
This replaces the use of CoglHandle with strongly type CoglPath *
pointers instead. The only function not converted for now is
cogl_is_path which will be done in a later commit.
This patch makes it so that only the backwards compatibility
COGL_HANDLE_DEFINE macro defines a _cogl_xyz_handle_new function. The
new COGL_OBJECT_DEFINE macro only defines a _cogl_xyz_object_new
function.
It's valid C to declare a function omitting it prototype, but it seems
to be a good practise to always declare a function with its
corresponding prototype.
While this is totally fine (0 in the pointer context will be converted
in the right internal NULL representation, which could be a value with
some bits to 1), I believe it's clearer to use NULL in the pointer
context.
It seems that, in most case, it's more an overlook than a deliberate
choice to use FALSE/0 as NULL, eg. copying a _COGL_GET_CONTEXT (ctx, 0)
or a g_return_val_if_fail (cond, 0) from a function returning a
gboolean.
This replaces the use of CoglHandle with strongly type CoglBuffer *
pointers instead. The only function not converted for now is
cogl_is_buffer which will be done in a later commit.
CoglHandle is a common source of complaints and confusion because people
expect a "handle" to be some form of integer type with some indirection
to lookup the corresponding objects as opposed to a direct pointer.
This patch starts by renaming CoglHandle to CoglObject * and creating
corresponding cogl_object_ APIs to replace the cogl_handle ones.
The next step though is to remove all use of CoglHandle in the Cogl APIs
and replace with strongly typed pointer types such as CoglMaterial * or
CoglTexture * etc also all occurrences of COGL_INVALID_HANDLE can just
use NULL instead.
After this we will consider switching to GTypeInstance internally so we
can have inheritance for our types and hopefully improve how we handle
bindings.
Note all these changes will be done in a way that maintains the API and
ABI.
Since the default alpha test function of GL_ALWAYS is equivalent to
GL_ALPHA_TEST being disabled we don't need to worry about Enabling/Disabling
it when flushing material state, instead it's enough to leave it always
enabled. We will assume that any driver worth its salt wont incur any
additional cost for glEnable (GL_ALPHA_TEST) + GL_ALWAYS vs
glDisable (GL_ALPHA_TEST).
This patch simply calls glEnable (GL_ALPHA_TEST) in cogl_create_context
When _cogl_disable_other_texcoord_arrays is called it disables the
neccessary texcoord arrays and then removes the bits for the disabled
arrays in ctx->texcoord_arrays_enabled. However none of the places
that call the function then set any bits in ctx->texcoord_arrays_enabled
so the arrays would never get marked and they would never get disabled
again.
This patch just changes it so that _cogl_disable_other_texcoord_arrays
also sets the corresponding bits in ctx->texcoord_arrays_enabled.
Instead of directly using a guint32 to store a bitmask for each used
texcoord array, it now stores them in a CoglBitmask. This removes the
limitation of 32 layers (although there are still other places in Cogl
that imply this restriction). To disable texcoord arrays code should
call _cogl_disable_other_texcoord_arrays which takes a bitmask of
texcoord arrays that should not be disabled. There are two extra
bitmasks stored in the CoglContext which are used temporarily for this
function to avoid allocating a new bitmask each time.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
This implements a growable array of bits called CoglBitmask. The
CoglBitmask is intended to be cheap if less than 32 bits are used. If
more bits are required it will allocate a GArray. The type is meant to
be allocated on the stack but because it can require additional
resources it also has a destroy function.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
Previously the counter for the number of layers was only updated
whenever the texture handle for a layer changes. However there are
many other ways for a new layer to be created for example by setting a
layer combine constant. Also by default the texture on a layer is
COGL_INVALID_HANDLE so if the application tries to create an explicit
layer with no texture by calling cogl_material_set_layer with
COGL_INVALID_HANDLE then it also wouldn't update the count.
This patch fixes that by incrementing the count in
cogl_material_get_layer instead. This function is called by all
functions that may end up creating a layer so it seems like the most
appropriate place.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
It should be quite acceptable to use a texture without defining any
texture coords. For example a shader may be in use that is doing
texture lookups without referencing the texture coordinates. Also it
should be possible to replace the vertex colors using a texture layer
without a texture but with a constant layer color.
enable_state_for_drawing_buffer no longer sets any disabled layers in
the overrides. Instead of counting the number of units with texture
coordinates it now keeps them in a mask. This means there can now be
gaps in the list of enabled texture coordinate arrays. To cope with
this, the Cogl context now also stores a mask to track the enabled
arrays. Instead of code manually iterating each enabled array to
disable them, there is now an internal function called
_cogl_disable_texcoord_arrays which disables a given mask.
I think this could also fix potential bugs when a vertex buffer has
gaps in the texture coordinate attributes that it provides. For
example if the vertex buffer only had texture coordinates for layer 2
then the disabling code would not disable the coordinates for layers 0
and 1 even though they are not used. This could cause a crash if the
previous data for those arrays is no longer valid.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
This adds a math utility API for handling 3 component, single precision
float vectors with the following; mostly self explanatory functions:
cogl_vector3_init
cogl_vector3_init_zero
cogl_vector3_equal
cogl_vector3_equal_with_epsilon
cogl_vector3_copy
cogl_vector3_free
cogl_vector3_invert
cogl_vector3_add
cogl_vector3_subtract
cogl_vector3_multiply_scalar
cogl_vector3_divide_scalar
cogl_vector3_normalize
cogl_vector3_magnitude
cogl_vector3_cross_product
cogl_vector3_dot_product
cogl_vector3_distance
Since the API is experimental you will need to define
COGL_ENABLE_EXPERIMENTAL_API before including cogl.h if you want to use
the API.
This stubs out an xlib event handling mechanism for Cogl. The intention
is for Clutter to use this to forward all x11 events to Cogl. As we move
winsys functionality down into Cogl, Cogl will become responsible for
handling a number of X events: ConfigureNotify events for onscreen
framebuffers, swap events and Damage events for cogl_x11_texture_pixmap.
Previously it would only try to set the blend equation if the RGB and
alpha blending functions were different. However it's completely valid
to use a non-standard blending function when the functions are the
same. This patch moves the blending equation to outside the if
statement.
Previously it would only set the blend constant if glBlendFuncSeparate
was used but it is perfectly acceptable to use the blend constant when
the same factor is used for each. It now sets the blend constant
whenever one of the factors would use the constant.
When a single statement is used to specify the factors for both the
RGB and alpha parts it previously split up the statement into
two. This works but it ends up unnecessarily using glBlendFuncSeparate
when glBlendFunc would suffice.
For example, the blend statement
RGBA = ADD(SRC_COLOR*(SRC_COLOR), DST_COLOR*(1-SRC_COLOR))
would get split into the two statements
RGBA = ADD(SRC_COLOR*(SRC_COLOR[RGB]), DST_COLOR*(1-SRC_COLOR[RGB]))
A = ADD(SRC_COLOR*(SRC_COLOR[A]), DST_COLOR*(1-SRC_COLOR[A]))
That translates to:
glBlendFuncSeparate (GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR,
GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
This patch makes it so that arg_to_gl_blend_factor can handle the
combined RGBA mask instead. That way the single statement gets
translated to the equivalent call:
glBlendFunc (GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR);
Previously a path copy was implemented such that only the array of
path nodes was shared with the source and the rest of the data is
copied. This was so that the copy could avoid a deep copy if the
source path is appended to because the copy keeps track of its own
length. This optimisation is probably not worthwhile because it makes
the copies less cheap. Instead the CoglPath struct now just contains a
single pointer to a new CoglPathData struct which is separately
ref-counted. When the path is modified it will be copied if the ref
count on the data is not 1.
Since framebuffer state is not flushed prior to replaying the journal,
the trick of marking the framebuffer dirty prior to calling
glBindFramebuffer() doesn't work... the outstanding journal entries
will get replayed to the newly created framebuffer.
Fix this by flushing the journal as well.
http://bugzilla.openedhand.com/show_bug.cgi?id=2110
Signed-off-by: Robert Bragg <robert@linux.intel.com>
If the clip stack is empty then _cogl_clip_stack_flush exits
immediately. This was missing out the assignment of *stencil_used_p at
the bottom of the function. If a path is then used after the clip is
cleared then it would think it needs to merge with the clip so the
stencil would not be cleared correctly.
Instead of using cogl_get_bitmasks() to query the GL machinery for the
size of the color bits, we should store the values inside the
CoglFramebuffer object and query them the first time we set the framebuffer
as the current one.
Currently, cogl_get_bitmasks() is re-implemented in terms of
cogl_framebuffer_get_*_bits(). As soon as we are able to expose the
CoglOnscreen framebuffer object in the public API we'll be able to
deprecate cogl_get_bitmasks() altogether.
http://bugzilla.openedhand.com/show_bug.cgi?id=2094
In 91cde78a7 I accidentally changed the function names that get looked
up for the framebuffer extension under GLES so that they didn't have
any suffix. The spec for extension specifies that they should have the
OES suffix.
Debugging code is not meant to be run in the nominal code path. Use
G_UNLIKELY to be reduce the number of bubbles in the instruction
pipeline.
Took the opportunity to re-indent the macros.
When uploading texture data the cogl-texture-2d-sliced backend was
using _cogl_texture_prepare_for_upload to create a bitmap suitable for
upload but then it was using the original bitmap instead of the new
bitmap for the data. This was causing any format conversions performed
by cogl_texture_prepare_for_upload to be ignored.
http://bugzilla.openedhand.com/show_bug.cgi?id=2059
In commit abe91784c4 I changed cogl-texture so that it would use the
OpenGL mechanism to specify a different internal texture format from
the image format so that it can do the conversion instead of
Cogl. However under GLES the internal format and the image format must
always be the same and it only supports a limited set of formats. This
patch changes _cogl_texture_prepare_for_upload so that it does the
conversion using the cogl bitmap code when compiling for GLES.
http://bugzilla.openedhand.com/show_bug.cgi?id=2059
There was a check at the bottom of the loop which sets up the state
for each of the layers so that it would break from the loop when the
maximum number of layers is reached. However after doing this it would
not increment 'i'. 'i' is later used to disable the remaining layers
so it would end up disabling the last layer it just set up.
This patch moves the check to be part of the loop condition so that
the check is performed after incrementing 'i'.
http://bugzilla.openedhand.com/show_bug.cgi?id=2064
The warning displayed when too many layers are used had an off-by-one
error so that it would display even if exactly the maximum number is
used. There was also a missing space at the end of the line in the
message which looked wrong when displayed on the terminal.
http://bugzilla.openedhand.com/show_bug.cgi?id=2064
cogl_path_arc_rel was never in any public headers so it isn't part of
the public API. It also has a slightly inconsistent name because the
rest of the relative path functions are called cogl_path_rel_*. This
patch makes it static for now to make it more obvious that it isn't
public. The name has changed to _cogl_path_rel_arc.
If a path is copied and then appended to, the copy needs to have the
last sub path truncated so that it fits in the total path size in case
the original path was modified. However the path size check was broken
so if the copied path had more than one sub path it would fail.
Previously the clip stack code was trying to detect when the
orientation of the on-screen rectangle had changed by checking if the
order of the y-coordinates on the left edge was different from the
order the x-coordinates on the top edge. This doesn't work for some
rotations which was causing the clip planes to clip the wrong side of
the line. This patch makes it detect the orientation by calculating
the signed area which is a standard computer graphics algorithm.
http://bugzilla.openedhand.com/show_bug.cgi?id=2079
When drawing a path with only a single sub path, Cogl uses the
'even-odd' fill rule which means that if a part of the path intersects
with another part then the intersection would be inverted. However
when combining sub paths it treats them as separate paths and then
unions them together. This doesn't match the semantics of the even-odd
rule in SVG and Cairo. This patch makes it so that a new sub path is
just drawn as another triangle fan so that it will continue to invert
the stencil buffer. This is also much simpler and more efficient as
well as being more correct.
http://bugzilla.openedhand.com/show_bug.cgi?id=2088
Under GLES glReadPixels is documented to only support GL_RGBA with
GL_UNSIGNED_BYTE and an implementation specfic format which can be
fetched with glGet, GL_IMPLEMENTATION_COLOR_READ_FORMAT_OES and
GL_IMPLEMENTATION_COLOR_READ_TYPE_OES. This patch makes it always read
using GL_RGBA and GL_UNSIGNED_BYTE and then convert the results if
neccessary.
This has some room for improvement because it doesn't attempt to use
the implementation specific format. Also the conversion is somewhat
wasteful because there are currently no cogl_bitmap_* functions to
convert without allocating a new buffer so it ends up doing an
intermediate copy.
http://bugzilla.openedhand.com/show_bug.cgi?id=2057
_cogl_bitmap_convert_format_and_premult was failing when converting
from RGBA to RGB and vice versa. _cogl_bitmap_fallback_convert
converts without altering the premult status so when choosing a new
format it would copy over the premult bit. However, it did this
regardless of whether the new format had an alpha channel so when
converting from RGBA_8888_PRE to RGB_888 it would end up inventing a
new meaningless format which would be RGB_888_PRE. This patch makes it
avoid copying the premult flag if the destination has no alpha. It
doesn't matter if it copies when the source format has no alpha
because it will always be unset.
_cogl_bitmap_convert_format_and_premult was also breaking when
converting from RGBA_8888_PRE to RGB_888 because it would think
RGB_888 is unpremultiplied and try to convert but then
_cogl_bitmap_fallback_premult wouldn't know how to do the conversion.
http://bugzilla.openedhand.com/show_bug.cgi?id=2057
This adds three new internal API functions which can be used to retain
the clip stack state and restore it later:
_cogl_get_clip_stack
_cogl_set_clip_stack
_cogl_clip_stack_copy
The functions are currently internal and not yet used but we may want
to make them public in future to replace the cogl_clip_stack_save()
and cogl_clip_stack_restore() APIs.
The get function just returns the handle to the clip stack at the top
of the stack of stacks and the set function just replaces it.
The copy function makes a cheap copy of an existing stack by taking a
reference to the top stack entry. This ends up working like a deep
copy because there is no way to modify entries of a stack but it
doesn't actually copy the data.
CoglClipStackState has now been renamed to CoglClipState and is moved
to a separate file. CoglClipStack now just maintains a stack and
doesn't worry about the rest of the state. CoglClipStack sill contains
the code to flush the stack to GL.
When glScissor is called it needs to pass coordinates in GL's
coordinate space where the origin is the bottom left. Previously this
conversion was done before storing the window rect in the clip
stack. However this might make it more difficult if we want to be able
to grab a handle to a clip stack and use it in different circumstances
later. This patch moves the coordinate conversion to inside the clip
state flushing code.
The stack is now stored as a list of reference counted entries.
Instead of using a GList, each entry now contains a link with a
reference to its parent. The idea is that this would allow copying
stacks with a shared ancestry.
Previously the code flushed the state by finding the bottom of the
stack and then applying each entry by walking back up to the top. This
is slightly harder to do now because the list is no longer
doubly-linked. However I don't think it matters which order the
entries are applied so I've just changed it to apply them in reverse
order.
There was also a restriction that if ever the stencil buffer is used
then we could no longer use clip planes for any subsequent entries. I
don't think this makes sense because it should always work as long as
it doesn't attempt to use the clip planes more than once. I've
therefore removed the restriction.
The CoglAtlasTexture struct was not being freed in
_cogl_atlas_texture_free so there would be a small leak whenever a
texture was destroyed.
Thanks to Robert Bragg for spotting this.
CoglMaterial now sets GL_CLAMP_TO_EDGE if WRAP_MODE_AUTOMATIC is used
unless it is overridden when the material is flushed. The primitives
are still expected to expose repeat semantics so no user visible
changes are made. The idea is that drawing non-repeated textures is
the most common case so if we make clamp_to_ege the default then we
will reduce the number of times we have to override the
material. Avoiding overrides will become important if the overriding
mechanism is replaced with one where the primitive is expected to copy
the material and change that instead.
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.
This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.
The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.
There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.
When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.
I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.
http://bugzilla.openedhand.com/show_bug.cgi?id=2063
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.
http://bugzilla.openedhand.com/show_bug.cgi?id=2063
CoglColor and CoglMatrix have public declarations with private members
so that we are free to change the implementation but the structures
could still be allocated on the stack in applications. However it's
quite easy not to realise the members are private and then access them
directly. This patch wraps the members in a macro which redefines the
symbol name when including the header outside of the clutter source.
http://bugzilla.openedhand.com/show_bug.cgi?id=2065
The xx, yx, zx etc fields are meant to be read-only but they were
marked as private with the gtk-doc annotation. This patch moves the
private marker so that the 16 float member fields are public but the
type, inverted matrix, flags and padding are not.
This adds three new API calls:
CoglHandle cogl_path_get()
void cogl_path_set(CoglHandle path)
CoglHandle cogl_path_copy(CoglHandle path)
All of the fields relating to the path have been moved from the Cogl
context to a new CoglPath handle type. The cogl context now just
contains a CoglPath handle. All of the existing path commands
manipulate the data in the current path handle. cogl_path_new now just
creates a new path handle and unrefs the old one.
The path handle can be stored for later with cogl_path_get. The path
can then be copied with cogl_path_copy. Internally it implements
copy-on-write semantics with an extra optimisation that it will only
copy the data if the new path is modified, but not if the original
path is modified. It can do this because the only way to modify a path
is by appending to it so the copied path is able to store its own path
length and only render the nodes up to that length. For this to work
the copied path also needs to keep its own copies of the path extents
because the parent path may change these by adding nodes.
The clip stack now uses the cogl_path_copy mechanism to store paths in
the stack instead of directly copying the data. This should save some
memory and processing time.
Although cogl_multiply_matrix was consistent with OpenGL, after further
consideration it was agreed that cogl_transform is a better name. Given
that it's in the global cogl_ namespace cogl_transform seems more self
documenting.
This adds an example of how to setup a Clutter style 2D coordinate space
and clarifies what state is owned by a framebuffer. (projection,
modelview, viewport and clip stack)
When we expose more cogl_framebuffer API this example will hopefully be
migrated into a more extensive introduction to using framebuffers.
Previously cogl_set_source and cogl_set_source_texture were in
cogl-material.c and the cogl_set_source_color* funcs were in
cogl-color.c. Originally this was because cogl.c was duplicated between
the GL and GLES backends and we didn't want to add to the amount of
duplicated code, but these files have since been consolidated into one
cogl.c.
Quite often it's desirable to be able to multiply the current modelview
matrix by an arbitrary matrix. Currently though you have to first
explicitly call cogl_get_modelview_matrix to get the current modelview
into a temporary variable, then you need to multiply it with your matrix
using cogl_matrix_multiply and finally use cogl_set_modelview_matrix to
make the result be the new modelview. This new convenience function lets
more efficiently skip the first get and last set steps.
Every now and then someone sees the cogl_enable API and gets confused,
thinking its public API so this renames the symbol to be clear that it's
is an internal only API.
When setting up the state for a layer, we need to switch texture
units before we do anything that might bind the texture, or
we'll bind the wrong texture to the previous unit.
http://bugzilla.openedhand.com/show_bug.cgi?id=2033
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
We need to set up the rowstride and alignment properly in
CoglTexture2D before reading texture data.
http://bugzilla.openedhand.com/show_bug.cgi?id=2036
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This makes it more likely consumers notice invalid unreferences.
GObject has the same assertion.
http://bugzilla.openedhand.com/show_bug.cgi?id=2029
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When entering cogl_texture_2d_new_from_bitmap the internal format can
be COGL_PIXEL_FORMAT_ANY. This was causing _cogl_texture_2d_can_create
to use an invalid GL format type. Mesa apparently ignores this but it
was causing errors when Cogl is compiled with debugging under NVidia.
http://bugzilla.openedhand.com/show_bug.cgi?id=2026
Add a return result from CoglTexture.transform_quad_coords_to_gl(),
so that we can properly determine the nature of repeats in
the face of GL_TEXTURE_RECTANGLE_ARB, where the returned
coordinates are not normalized.
The comment "We also work out whether any of the texture
coordinates are outside the range [0.0,1.0]. We need to do
this after calling transform_coords_to_gl in case the texture
backend is munging the coordinates (such as in the sub texture
backend)." is disregarded and removed, since it's actually
the virtual coordinates that determine whether we repeat,
not the GL coordinates.
Warnings about disregarded layers are used in all cases where
applicable, including for subtextures.
http://bugzilla.openedhand.com/show_bug.cgi?id=2016
Signed-off-by: Neil Roberts <neil@linux.intel.com>
In _cogl_texture_2d_sliced_foreach_sub_texture_in_region(), don't
assert that the target is GL_TEXTURE_2D; instead conditionalize
normalization on the target.
http://bugzilla.openedhand.com/show_bug.cgi?id=2015
commit 511e5ceb51 accidentally removed the #ifdef COGL_ENABLE_DEBUG
guards around the "cogl-debug" and "cogl-no-debug" cogl_args[] which
this patch restores.
Just like _cogl_texture_2d_new_with_size(),
_cogl_texture_2d_new_from_bitmap() needs to check if an unsliced
texture can be created at the given size, or if hardware
limitations prevent this.
http://bugzilla.openedhand.com/show_bug.cgi?id=2014
Signed-off-by: Neil Roberts <neil@linux.intel.com>
cogl_read_pixels() no longer asserts that the format passed in is
RGBA_8888 but instead accepts any format. The appropriate GL enums for
the format are passed to glReadPixels so OpenGL should be perform a
conversion if neccessary.
It currently assumes glReadPixels will always give us premultiplied
data. This will usually be correct because the result of the default
blending operations for Cogl ends up with premultiplied data in the
framebuffer. However it is possible for the framebuffer to be in
whatever format depending on what CoglMaterial is used to render to
it. Eventually we may want to add a way for an application to inform
Cogl that the framebuffer is not premultiplied in case it is being
used for some special purpose.
If the requested format is not premultiplied then Cogl will convert
it. The tests have been changed to read the data as premultiplied so
that they won't be affected by the conversion. Picking in Clutter has
been changed to use COGL_PIXEL_FORMAT_RGB_888 because it doesn't need
the alpha component. clutter_stage_read_pixels is left unchanged
because the application can't specify a format for that so it seems to
make most sense to store unpremultiplied values.
http://bugzilla.openedhand.com/show_bug.cgi?id=1959
Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.
Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.
As a side note: this commit closes the oldes bug in Clutter's bug
report tool.
http://bugzilla.openedhand.com/show_bug.cgi?id=521
This adds a COGL_INDICES_TYPE_UNSIGNED_INT enum value so that unsigned
ints can be used with cogl_vertex_buffer_indices_new. Unsigned ints
are not supported in core on GLES so a feature flag has also been
added to advertise this. GLES only sets the feature if the
GL_OES_element_index_uint extension is available. It is an error to
call indices_new() with unsigned ints unless the feature is
advertised.
http://bugzilla.openedhand.com/show_bug.cgi?id=1998
Previously the GLES2 backend needed a special wrapper for
glBindTexture because it needed to know the internal GL format of the
texture in order to correctly implement the GL_MODULATE texture env
mode. When GL_MODULATE is used then the RGB values are taken from the
previous texture layer rather than being fetched from the
texture. However since the material API was added Cogl no longer uses
the GL_MODULATE texture env mode but instead always uses GL_COMBINE.
Compiling the GLES2 backend broke since the more-texture-backends
branch merge because the cogl_get_internal_gl_format function was
removed and there was one place in GLES2 specific code that was using
this to bind the texture.
The texture layer combine functions are now hard coded to GL_COMBINE
instead of GL_MODULATE. The combine function can be customized with
all the parameters of GL_COMBINE. A shader is generated to implement
the given parameters.
Currently it will try to generate code for the constant color but it
will use a uniform which does not exist.
The GLES2 backend for Cogl is failing to compile because
GL_MAX_TEXTURE_UNITS is not defined. Let's define it and provide a
wrapper which uses GL_MAX_TEXTURE_IMAGE_UNITS or
COGL_GLES2_MAX_TEXTURE_UNITS, whichever is the smallest.
