sungmg/mutter-performance-source
1
0
Fork 0
Code Activity
mutter-performance-source/cogl/cogl-path-functions.h
Robert Bragg 54735dec84 Switch use of primitive glib types to c99 equivalents 
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.

Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.

Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.

So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.

Instead of gsize we now use size_t

For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-08-06 14:27:39 +01:00

430 lines
13 KiB
C
Raw Blame History

/*
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
*
* Copyright (C) 2008,2009,2012 Intel Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see <http://www.gnu.org/licenses/>.
*
*
*/
#if !defined(__COGL_H_INSIDE__) && !defined(CLUTTER_COMPILATION)
#error "Only <cogl/cogl.h> can be included directly."
#endif
#ifndef __COGL_PATH_FUNCTIONS_H__
#define __COGL_PATH_FUNCTIONS_H__
/* The functions are declared separately because cogl-path.c needs to
get the function declarations from the old 1.0 API without
colliding with the enum declarations from the 2.0 API */
#include <cogl/cogl-types.h>
G_BEGIN_DECLS
/**
* cogl_is_path:
* @handle: A CoglHandle
*
* Gets whether the given handle references an existing path object.
*
* Return value: %TRUE if the handle references a #CoglPath,
* %FALSE otherwise
*/
CoglBool
cogl_is_path (CoglHandle handle);
/**
* cogl_path_set_fill_rule:
* @fill_rule: The new fill rule.
*
* Sets the fill rule of the current path to @fill_rule. This will
* affect how the path is filled when cogl_path_fill() is later
* called. Note that the fill rule state is attached to the path so
* calling cogl_get_path() will preserve the fill rule and calling
* cogl_path_new() will reset the fill rule back to the default.
*
* Since: 1.4
*/
void
cogl_path_set_fill_rule (CoglPathFillRule fill_rule);
/**
* cogl_path_get_fill_rule:
*
* Retrieves the fill rule set using cogl_path_set_fill_rule().
*
* Return value: the fill rule that is used for the current path.
*
* Since: 1.4
*/
CoglPathFillRule
cogl_path_get_fill_rule (void);
/**
* cogl_path_fill:
*
* Fills the interior of the constructed shape using the current
* drawing color. The current path is then cleared. To use the path
* again, call cogl_path_fill_preserve() instead.
*
* The interior of the shape is determined using the fill rule of the
* path. See %CoglPathFillRule for details.
**/
void
cogl_path_fill (void);
/**
* cogl_path_fill_preserve:
*
* Fills the interior of the constructed shape using the current
* drawing color and preserves the path to be used again. See
* cogl_path_fill() for a description what is considered the interior
* of the shape.
*
* Since: 1.0
**/
void
cogl_path_fill_preserve (void);
/**
* cogl_path_stroke:
*
* Strokes the constructed shape using the current drawing color and a
* width of 1 pixel (regardless of the current transformation
* matrix). To current path is then cleared. To use the path again,
* call cogl_path_stroke_preserve() instead.
**/
void
cogl_path_stroke (void);
/**
* cogl_path_stroke_preserve:
*
* Strokes the constructed shape using the current drawing color and
* preserves the path to be used again.
*
* Since: 1.0
**/
void
cogl_path_stroke_preserve (void);
/**
* cogl_path_new:
*
* Clears the current path and starts a new one. Creating a new path
* also resets the fill rule to the default which is
* %COGL_PATH_FILL_RULE_EVEN_ODD.
*
* Since: 1.0
*/
void
cogl_path_new (void);
/**
* cogl_path_move_to:
* @x: X coordinate of the pen location to move to.
* @y: Y coordinate of the pen location to move to.
*
* Moves the pen to the given location. If there is an existing path
* this will start a new disjoint subpath.
**/
void
cogl_path_move_to (float x,
float y);
/**
* cogl_path_rel_move_to:
* @x: X offset from the current pen location to move the pen to.
* @y: Y offset from the current pen location to move the pen to.
*
* Moves the pen to the given offset relative to the current pen
* location. If there is an existing path this will start a new
* disjoint subpath.
**/
void
cogl_path_rel_move_to (float x,
float y);
/**
* cogl_path_line_to:
* @x: X coordinate of the end line vertex
* @y: Y coordinate of the end line vertex
*
* Adds a straight line segment to the current path that ends at the
* given coordinates.
**/
void
cogl_path_line_to (float x,
float y);
/**
* cogl_path_rel_line_to:
* @x: X offset from the current pen location of the end line vertex
* @y: Y offset from the current pen location of the end line vertex
*
* Adds a straight line segment to the current path that ends at the
* given coordinates relative to the current pen location.
**/
void
cogl_path_rel_line_to (float x,
float y);
/**
* cogl_path_arc:
* @center_x: X coordinate of the elliptical arc center
* @center_y: Y coordinate of the elliptical arc center
* @radius_x: X radius of the elliptical arc
* @radius_y: Y radius of the elliptical arc
* @angle_1: Angle in degrees at which the arc begin
* @angle_2: Angle in degrees at which the arc ends
*
* Adds an elliptical arc segment to the current path. A straight line
* segment will link the current pen location with the first vertex
* of the arc. If you perform a move_to to the arcs start just before
* drawing it you create a free standing arc.
*
* The angles are measured in degrees where 0° is in the direction of
* the positive X axis and 90° is in the direction of the positive Y
* axis. The angle of the arc begins at @angle_1 and heads towards
* @angle_2 (so if @angle_2 is less than @angle_1 it will decrease,
* otherwise it will increase).
**/
void
cogl_path_arc (float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2);
/**
* cogl_path_curve_to:
* @x_1: X coordinate of the second bezier control point
* @y_1: Y coordinate of the second bezier control point
* @x_2: X coordinate of the third bezier control point
* @y_2: Y coordinate of the third bezier control point
* @x_3: X coordinate of the fourth bezier control point
* @y_3: Y coordinate of the fourth bezier control point
*
* Adds a cubic bezier curve segment to the current path with the given
* second, third and fourth control points and using current pen location
* as the first control point.
**/
void
cogl_path_curve_to (float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3);
/**
* cogl_path_rel_curve_to:
* @x_1: X coordinate of the second bezier control point
* @y_1: Y coordinate of the second bezier control point
* @x_2: X coordinate of the third bezier control point
* @y_2: Y coordinate of the third bezier control point
* @x_3: X coordinate of the fourth bezier control point
* @y_3: Y coordinate of the fourth bezier control point
*
* Adds a cubic bezier curve segment to the current path with the given
* second, third and fourth control points and using current pen location
* as the first control point. The given coordinates are relative to the
* current pen location.
*/
void
cogl_path_rel_curve_to (float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3);
/**
* cogl_path_close:
*
* Closes the path being constructed by adding a straight line segment
* to it that ends at the first vertex of the path.
**/
void
cogl_path_close (void);
/**
* cogl_path_line:
* @x_1: X coordinate of the start line vertex
* @y_1: Y coordinate of the start line vertex
* @x_2: X coordinate of the end line vertex
* @y_2: Y coordinate of the end line vertex
*
* Constructs a straight line shape starting and ending at the given
* coordinates. If there is an existing path this will start a new
* disjoint sub-path.
**/
void
cogl_path_line (float x_1,
float y_1,
float x_2,
float y_2);
/**
* cogl_path_polyline:
* @coords: (in) (array) (transfer none): A pointer to the first element of an
* array of fixed-point values that specify the vertex coordinates.
* @num_points: The total number of vertices.
*
* Constructs a series of straight line segments, starting from the
* first given vertex coordinate. If there is an existing path this
* will start a new disjoint sub-path. Each subsequent segment starts
* where the previous one ended and ends at the next given vertex
* coordinate.
*
* The coords array must contain 2 * num_points values. The first value
* represents the X coordinate of the first vertex, the second value
* represents the Y coordinate of the first vertex, continuing in the same
* fashion for the rest of the vertices. (num_points - 1) segments will
* be constructed.
**/
void
cogl_path_polyline (const float *coords,
int num_points);
/**
* cogl_path_polygon:
* @coords: (in) (array) (transfer none): A pointer to the first element of
* an array of fixed-point values that specify the vertex coordinates.
* @num_points: The total number of vertices.
*
* Constructs a polygonal shape of the given number of vertices. If
* there is an existing path this will start a new disjoint sub-path.
*
* The coords array must contain 2 * num_points values. The first value
* represents the X coordinate of the first vertex, the second value
* represents the Y coordinate of the first vertex, continuing in the same
* fashion for the rest of the vertices.
**/
void
cogl_path_polygon (const float *coords,
int num_points);
/**
* cogl_path_rectangle:
* @x_1: X coordinate of the top-left corner.
* @y_1: Y coordinate of the top-left corner.
* @x_2: X coordinate of the bottom-right corner.
* @y_2: Y coordinate of the bottom-right corner.
*
* Constructs a rectangular shape at the given coordinates. If there
* is an existing path this will start a new disjoint sub-path.
**/
void
cogl_path_rectangle (float x_1,
float y_1,
float x_2,
float y_2);
/**
* cogl_path_ellipse:
* @center_x: X coordinate of the ellipse center
* @center_y: Y coordinate of the ellipse center
* @radius_x: X radius of the ellipse
* @radius_y: Y radius of the ellipse
*
* Constructs an ellipse shape. If there is an existing path this will
* start a new disjoint sub-path.
**/
void
cogl_path_ellipse (float center_x,
float center_y,
float radius_x,
float radius_y);
/**
* cogl_path_round_rectangle:
* @x_1: X coordinate of the top-left corner.
* @y_1: Y coordinate of the top-left corner.
* @x_2: X coordinate of the bottom-right corner.
* @y_2: Y coordinate of the bottom-right corner.
* @radius: Radius of the corner arcs.
* @arc_step: Angle increment resolution for subdivision of
* the corner arcs.
*
* Constructs a rectangular shape with rounded corners. If there is an
* existing path this will start a new disjoint sub-path.
**/
void
cogl_path_round_rectangle (float x_1,
float y_1,
float x_2,
float y_2,
float radius,
float arc_step);
/**
* cogl_get_path: (skip)
*
* Gets a pointer to the current path. The path can later be used
* again by calling cogl_path_set(). Note that the path isn't copied
* so if you later call any functions to add to the path it will
* affect the returned object too. No reference is taken on the path
* so if you want to retain it you should take your own reference with
* cogl_object_ref().
*
* Return value: a pointer to the current path.
*
* Since: 1.4
*/
CoglPath *
cogl_get_path (void);
/**
* cogl_set_path: (skip)
* @path: A #CoglPath object
*
* Replaces the current path with @path. A reference is taken on the
* object so if you no longer need the path you should unref with
* cogl_object_unref().
*
* Since: 1.4
*/
void
cogl_set_path (CoglPath *path);
/**
* cogl_path_copy: (skip)
* @path: A #CoglPath object
*
* Returns a new copy of the path in @path. The new path has a
* reference count of 1 so you should unref it with
* cogl_object_unref() if you no longer need it.
*
* Internally the path will share the data until one of the paths is
* modified so copying paths should be relatively cheap.
*
* Return value: (transfer full): a copy of the path in @path.
*/
CoglPath *
cogl_path_copy (CoglPath *path);
G_END_DECLS
#endif /* __COGL_PATH_FUNCTIONS_H__ */
View git blame Copy permalink