sungmg/mutter-performance-source
1
0
Fork 0
Code Activity
mutter-performance-source/cogl/cogl-pipeline-layer-state.c

1815 lines
63 KiB
C
Raw Normal View History

pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* A Low Level GPU Graphics and Utilities API
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
*
* Copyright (C) 2008,2009,2010 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
*
*
*
* Authors:
* Robert Bragg <robert@linux.intel.com>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
cogl-pipeline/cogl-pango: Added forgotten includes It seems that cogl-context-private.h needs to be included before including any of the pipeline-related stuff to avoid build errors on C89 compilers. This is due to the recent cogl-pipeline decoupling, seems like. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-23 08:43:05 +00:00
#include "cogl-context-private.h"
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
#include "cogl-pipeline-private.h"
#include "cogl-blend-string.h"
#include "cogl-util.h"
#include "cogl-matrix.h"
snippet: Move the hook to be a property of the snippet Instead of specifying the hook point when adding to the pipeline using a separate function for each hook, the hook is now a property of the snippet. The hook is set on construction and is then read-only. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 20:54:14 +00:00
#include "cogl-snippet-private.h"
cogl-pipeline-payer-state.c: Include cogl-texture-private.h Needed for _cogl_texture_get_type so that C4013 warnings/implicit declaration of ... warnings can be avoided. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-22 12:56:05 +00:00
#include "cogl-texture-private.h"
Add -Wmissing-declarations to maintainer flags and fix problems This option to GCC makes it give a warning whenever a global function is defined without a declaration. This should catch cases were we've defined a function but forgot to put it in a header. In that case it is either only used within one file so we should make it static or we should declare it in a header. The following changes where made to fix problems: • Some functions were made static • cogl-path.h (the one containing the 1.0 API) was split into two files, one defining the functions and one defining the enums so that cogl-path.c can include the enum and function declarations from the 2.0 API as well as the function declarations from the 1.0 API. • cogl2-clip-state has been removed. This only had one experimental function called cogl_clip_push_from_path but as this is unstable we might as well remove it favour of the equivalent cogl_framebuffer_* API. • The GLX, SDL and WGL winsys's now have a private header to define their get_vtable function instead of directly declaring in the C file where it is called. • All places that were calling COGL_OBJECT_DEFINE need to have the cogl_is_whatever function declared so these have been added either as a public function or in a private header. • Some files that were not including the header containing their function declarations have been fixed to do so. • Any unused error quark functions have been removed. If we later want them we should add them back one by one and add a declaration for them in a header. • _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and made a public function with a declaration in cogl-framebuffer.h • Similarly for CoglOnscreen. • cogl_vdraw_indexed_attributes is called cogl_framebuffer_vdraw_indexed_attributes in the header. The definition has been changed to match the header. • cogl_index_buffer_allocate has been removed. This had no declaration and I'm not sure what it's supposed to do. • CoglJournal has been changed to use the internal CoglObject macro so that it won't define an exported cogl_is_journal symbol. • The _cogl_blah_pointer_from_handle functions have been removed. CoglHandle isn't used much anymore anyway and in the few places where it is used I think it's safe to just use the implicit cast from void* to the right type. • The test-utils.h header for the conformance tests explicitly disables the -Wmissing-declaration option using a pragma because all of the tests declare their main function without a header. Any mistakes relating to missing declarations aren't really important for the tests. • cogl_quaternion_init_from_quaternion and init_from_matrix have been given declarations in cogl-quaternion.h Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-06 18:21:28 +00:00
#include "cogl-pipeline-layer-state-private.h"
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
#include "cogl-error-private.h"
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
#include "string.h"
#if 0
#include "cogl-context-private.h"
#include "cogl-color-private.h"
#endif
/*
* XXX: consider special casing layer->unit_index so it's not a sparse
* property so instead we can assume it's valid for all layer
* instances.
* - We would need to initialize ->unit_index in
* _cogl_pipeline_layer_copy ().
*
* XXX: If you use this API you should consider that the given layer
* might not be writeable and so a new derived layer will be allocated
* and modified instead. The layer modified will be returned so you
* can identify when this happens.
*/
CoglPipelineLayer *
_cogl_pipeline_set_layer_unit (CoglPipeline *required_owner,
CoglPipelineLayer *layer,
int unit_index)
{
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_UNIT;
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer, change);
CoglPipelineLayer *new;
if (authority->unit_index == unit_index)
return layer;
new =
_cogl_pipeline_layer_pre_change_notify (required_owner,
layer,
change);
if (new != layer)
layer = new;
else
{
/* If the layer we found is currently the authority on the state
* we are changing see if we can revert to one of our ancestors
* being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, change);
if (old_authority->unit_index == unit_index)
{
layer->differences &= ~change;
return layer;
}
}
}
layer->unit_index = unit_index;
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
return layer;
}
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_get_texture_real (CoglPipelineLayer *layer)
{
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer,
COGL_PIPELINE_LAYER_STATE_TEXTURE_DATA);
return authority->texture;
}
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *
Make _cogl_pipeline_get_layer_texture public There was no other way to get a pointer to the texture attached to a pipeline layer apart from the using the CoglMaterial API but I think this was just an oversight so we should add this in. It is already maked in the sections file for the gtk-doc. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-05 20:04:14 +00:00
cogl_pipeline_get_layer_texture (CoglPipeline *pipeline,
int layer_index)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineLayer *layer =
_cogl_pipeline_get_layer (pipeline, layer_index);
return _cogl_pipeline_layer_get_texture (layer);
}
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
CoglTextureType
_cogl_pipeline_layer_get_texture_type (CoglPipelineLayer *layer)
{
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer,
COGL_PIPELINE_LAYER_STATE_TEXTURE_TYPE);
return authority->texture_type;
}
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
static void
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
_cogl_pipeline_set_layer_texture_type (CoglPipeline *pipeline,
int layer_index,
CoglTextureType texture_type)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_TEXTURE_TYPE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
CoglPipelineLayer *new;
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
if (texture_type == authority->texture_type)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
return;
new = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, change);
if (new != layer)
layer = new;
else
{
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, change);
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
if (old_authority->texture_type == texture_type)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
layer->differences &= ~change;
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
goto changed;
}
}
}
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
layer->texture_type = texture_type;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
changed:
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
pipeline->dirty_real_blend_enable = TRUE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
static void
_cogl_pipeline_set_layer_texture_data (CoglPipeline *pipeline,
int layer_index,
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *texture)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_TEXTURE_DATA;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
CoglPipelineLayer *new;
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
if (authority->texture == texture)
return;
new = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, change);
if (new != layer)
layer = new;
else
{
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, change);
if (old_authority->texture == texture)
{
layer->differences &= ~change;
if (layer->texture != NULL)
cogl_object_unref (layer->texture);
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
goto changed;
}
}
}
if (texture != NULL)
cogl_object_ref (texture);
if (layer == authority &&
layer->texture != NULL)
cogl_object_unref (layer->texture);
layer->texture = texture;
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
changed:
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
pipeline->dirty_real_blend_enable = TRUE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
cogl_pipeline_set_layer_texture (CoglPipeline *pipeline,
int layer_index,
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *texture)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
/* For the convenience of fragend code we separate texture state
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
* into the "type" and the "data", and setting a layer texture
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
* updates both of these properties.
*
* One example for why this is helpful is that the fragends may
* cache programs they generate and want to re-use those programs
* with all pipelines having equivalent fragment processing state.
* For the sake of determining if pipelines have equivalent fragment
* processing state we don't need to compare that the same
* underlying texture objects are referenced by the pipelines but we
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
* do need to see if they use the same texture types. Making this
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
* distinction is much simpler if they are in different state
* groups.
*
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
* Note: if a NULL texture is set then we leave the type unchanged
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
* so we can avoid needlessly invalidating any associated fragment
* program.
*/
if (texture)
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
{
CoglTextureType texture_type =
_cogl_texture_get_type (texture);
_cogl_pipeline_set_layer_texture_type (pipeline,
layer_index,
texture_type);
}
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_set_layer_texture_data (pipeline, layer_index, texture);
}
Add cogl_pipeline_set_layer_null_texture() This adds a public function to replace the texture for a layer with the default white texture. It is equivalent to calling cogl_pipeline_set_layer_texture with NULL for the texture object except that it also lets you choose a type for the texture. The idea is that applications using a base pipeline to make multiple copies that can share the generated shaders can use this function to make the layer come into existence with the right texture type. Previously the idiom would be to create a 1x1 dummy texture of the right type but this ends up creating lots of redundant little textures. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 13:59:52 +00:00
void
cogl_pipeline_set_layer_null_texture (CoglPipeline *pipeline,
int layer_index,
CoglTextureType texture_type)
{
CoglContext *ctx = _cogl_context_get_default ();
/* Disallow setting texture types that aren't supported */
switch (texture_type)
{
case COGL_TEXTURE_TYPE_2D:
break;
case COGL_TEXTURE_TYPE_3D:
if (ctx->default_gl_texture_3d_tex == NULL)
{
g_warning ("The default 3D texture was set on a pipeline but "
"3D textures are not supported");
texture_type = COGL_TEXTURE_TYPE_2D;
return;
}
break;
case COGL_TEXTURE_TYPE_RECTANGLE:
if (ctx->default_gl_texture_rect_tex == NULL)
{
g_warning ("The default rectangle texture was set on a pipeline but "
"rectangle textures are not supported");
texture_type = COGL_TEXTURE_TYPE_2D;
}
break;
}
_cogl_pipeline_set_layer_texture_type (pipeline, layer_index, texture_type);
_cogl_pipeline_set_layer_texture_data (pipeline, layer_index, NULL);
}
Add -Wmissing-declarations to maintainer flags and fix problems This option to GCC makes it give a warning whenever a global function is defined without a declaration. This should catch cases were we've defined a function but forgot to put it in a header. In that case it is either only used within one file so we should make it static or we should declare it in a header. The following changes where made to fix problems: • Some functions were made static • cogl-path.h (the one containing the 1.0 API) was split into two files, one defining the functions and one defining the enums so that cogl-path.c can include the enum and function declarations from the 2.0 API as well as the function declarations from the 1.0 API. • cogl2-clip-state has been removed. This only had one experimental function called cogl_clip_push_from_path but as this is unstable we might as well remove it favour of the equivalent cogl_framebuffer_* API. • The GLX, SDL and WGL winsys's now have a private header to define their get_vtable function instead of directly declaring in the C file where it is called. • All places that were calling COGL_OBJECT_DEFINE need to have the cogl_is_whatever function declared so these have been added either as a public function or in a private header. • Some files that were not including the header containing their function declarations have been fixed to do so. • Any unused error quark functions have been removed. If we later want them we should add them back one by one and add a declaration for them in a header. • _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and made a public function with a declaration in cogl-framebuffer.h • Similarly for CoglOnscreen. • cogl_vdraw_indexed_attributes is called cogl_framebuffer_vdraw_indexed_attributes in the header. The definition has been changed to match the header. • cogl_index_buffer_allocate has been removed. This had no declaration and I'm not sure what it's supposed to do. • CoglJournal has been changed to use the internal CoglObject macro so that it won't define an exported cogl_is_journal symbol. • The _cogl_blah_pointer_from_handle functions have been removed. CoglHandle isn't used much anymore anyway and in the few places where it is used I think it's safe to just use the implicit cast from void* to the right type. • The test-utils.h header for the conformance tests explicitly disables the -Wmissing-declaration option using a pragma because all of the tests declare their main function without a header. Any mistakes relating to missing declarations aren't really important for the tests. • cogl_quaternion_init_from_quaternion and init_from_matrix have been given declarations in cogl-quaternion.h Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-06 18:21:28 +00:00
static void
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
_cogl_pipeline_set_layer_sampler_state (CoglPipeline *pipeline,
CoglPipelineLayer *layer,
CoglPipelineLayer *authority,
const CoglSamplerCacheEntry *state)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayer *new;
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
if (authority->sampler_cache_entry == state)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
return;
new = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, change);
if (new != layer)
layer = new;
else
{
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
if (old_authority->sampler_cache_entry == state)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
layer->differences &= ~change;
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
return;
}
}
}
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
layer->sampler_cache_entry = state;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
}
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
static CoglSamplerCacheWrapMode
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
public_to_internal_wrap_mode (CoglPipelineWrapMode mode)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
return (CoglSamplerCacheWrapMode)mode;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
static CoglPipelineWrapMode
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
internal_to_public_wrap_mode (CoglSamplerCacheWrapMode internal_mode)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (internal_mode !=
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
COGL_SAMPLER_CACHE_WRAP_MODE_CLAMP_TO_BORDER,
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
COGL_PIPELINE_WRAP_MODE_AUTOMATIC);
return (CoglPipelineWrapMode)internal_mode;
}
void
cogl_pipeline_set_layer_wrap_mode_s (CoglPipeline *pipeline,
int layer_index,
CoglPipelineWrapMode mode)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglSamplerCacheWrapMode internal_mode =
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
public_to_internal_wrap_mode (mode);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state =
_cogl_sampler_cache_update_wrap_modes (ctx->sampler_cache,
authority->sampler_cache_entry,
internal_mode,
authority->sampler_cache_entry->
wrap_mode_t,
authority->sampler_cache_entry->
wrap_mode_p);
_cogl_pipeline_set_layer_sampler_state (pipeline,
layer,
authority,
sampler_state);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
cogl_pipeline_set_layer_wrap_mode_t (CoglPipeline *pipeline,
int layer_index,
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineWrapMode mode)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglSamplerCacheWrapMode internal_mode =
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
public_to_internal_wrap_mode (mode);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state =
_cogl_sampler_cache_update_wrap_modes (ctx->sampler_cache,
authority->sampler_cache_entry,
authority->sampler_cache_entry->
wrap_mode_s,
internal_mode,
authority->sampler_cache_entry->
wrap_mode_p);
_cogl_pipeline_set_layer_sampler_state (pipeline,
layer,
authority,
sampler_state);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
/* The rationale for naming the third texture coordinate 'p' instead
of OpenGL's usual 'r' is that 'r' conflicts with the usual naming
of the 'red' component when treating a vector as a color. Under
GLSL this is awkward because the texture swizzling for a vector
uses a single letter for each component and the names for colors,
textures and positions are synonymous. GLSL works around this by
naming the components of the texture s, t, p and q. Cogl already
effectively already exposes this naming because it exposes GLSL so
it makes sense to use that naming consistently. Another alternative
could be u, v and w. This is what Blender and Direct3D use. However
the w component conflicts with the w component of a position
vertex. */
void
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
cogl_pipeline_set_layer_wrap_mode_p (CoglPipeline *pipeline,
int layer_index,
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineWrapMode mode)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglSamplerCacheWrapMode internal_mode =
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
public_to_internal_wrap_mode (mode);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state =
_cogl_sampler_cache_update_wrap_modes (ctx->sampler_cache,
authority->sampler_cache_entry,
authority->sampler_cache_entry->
wrap_mode_s,
authority->sampler_cache_entry->
wrap_mode_t,
internal_mode);
_cogl_pipeline_set_layer_sampler_state (pipeline,
layer,
authority,
sampler_state);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
cogl_pipeline_set_layer_wrap_mode (CoglPipeline *pipeline,
int layer_index,
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineWrapMode mode)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglSamplerCacheWrapMode internal_mode =
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
public_to_internal_wrap_mode (mode);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state =
_cogl_sampler_cache_update_wrap_modes (ctx->sampler_cache,
authority->sampler_cache_entry,
internal_mode,
internal_mode,
internal_mode);
_cogl_pipeline_set_layer_sampler_state (pipeline,
layer,
authority,
sampler_state);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* XXX: I wonder if we should really be duplicating the mode into
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
* the 'p' wrap mode too? */
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
/* FIXME: deprecate this API */
CoglPipelineWrapMode
_cogl_pipeline_layer_get_wrap_mode_s (CoglPipelineLayer *layer)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *authority;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (_cogl_is_pipeline_layer (layer), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state = authority->sampler_cache_entry;
return internal_to_public_wrap_mode (sampler_state->wrap_mode_s);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
CoglPipelineWrapMode
cogl_pipeline_get_layer_wrap_mode_s (CoglPipeline *pipeline, int layer_index)
{
CoglPipelineLayer *layer;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* FIXME: we shouldn't ever construct a layer in a getter function */
return _cogl_pipeline_layer_get_wrap_mode_s (layer);
}
/* FIXME: deprecate this API */
CoglPipelineWrapMode
_cogl_pipeline_layer_get_wrap_mode_t (CoglPipelineLayer *layer)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *authority;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (_cogl_is_pipeline_layer (layer), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state = authority->sampler_cache_entry;
return internal_to_public_wrap_mode (sampler_state->wrap_mode_t);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
CoglPipelineWrapMode
cogl_pipeline_get_layer_wrap_mode_t (CoglPipeline *pipeline, int layer_index)
{
CoglPipelineLayer *layer;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* FIXME: we shouldn't ever construct a layer in a getter function */
return _cogl_pipeline_layer_get_wrap_mode_t (layer);
}
CoglPipelineWrapMode
_cogl_pipeline_layer_get_wrap_mode_p (CoglPipelineLayer *layer)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_SAMPLER;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer, change);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *sampler_state;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state = authority->sampler_cache_entry;
return internal_to_public_wrap_mode (sampler_state->wrap_mode_p);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
CoglPipelineWrapMode
cogl_pipeline_get_layer_wrap_mode_p (CoglPipeline *pipeline, int layer_index)
{
CoglPipelineLayer *layer;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
return _cogl_pipeline_layer_get_wrap_mode_p (layer);
}
void
_cogl_pipeline_layer_get_wrap_modes (CoglPipelineLayer *layer,
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglSamplerCacheWrapMode *wrap_mode_s,
CoglSamplerCacheWrapMode *wrap_mode_t,
CoglSamplerCacheWrapMode *wrap_mode_p)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer,
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
COGL_PIPELINE_LAYER_STATE_SAMPLER);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
*wrap_mode_s = authority->sampler_cache_entry->wrap_mode_s;
*wrap_mode_t = authority->sampler_cache_entry->wrap_mode_t;
*wrap_mode_p = authority->sampler_cache_entry->wrap_mode_p;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
cogl_pipeline_set_layer_point_sprite_coords_enabled (CoglPipeline *pipeline,
int layer_index,
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool enable,
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
CoglError **error)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineLayerState change =
COGL_PIPELINE_LAYER_STATE_POINT_SPRITE_COORDS;
CoglPipelineLayer *layer;
CoglPipelineLayer *new;
CoglPipelineLayer *authority;
features: Support more than 32 features! Currently features are represented as bits in a 32bit mask so we obviously can't have more than 32 features with that approach. The new approach is to use the COGL_FLAGS_ macros which lets us handle bitmasks without a size limit and we change the public api to accept individual feature enums instead of a mask. This way there is no limit on the number of features we can add to Cogl. Instead of using cogl_features_available() there is a new cogl_has_feature() function and for checking multiple features there is cogl_has_features() which takes a zero terminated vararg list of features. In addition to being able to check for individual features this also adds a way to query all the features currently available via cogl_foreach_feature() which will call a callback for each feature. Since the new functions take an explicit context pointer there is also no longer any ambiguity over when users can first start to query features. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-12 21:31:12 +00:00
_COGL_GET_CONTEXT (ctx, FALSE);
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Don't allow point sprite coordinates to be enabled if the driver
doesn't support it */
features: Support more than 32 features! Currently features are represented as bits in a 32bit mask so we obviously can't have more than 32 features with that approach. The new approach is to use the COGL_FLAGS_ macros which lets us handle bitmasks without a size limit and we change the public api to accept individual feature enums instead of a mask. This way there is no limit on the number of features we can add to Cogl. Instead of using cogl_features_available() there is a new cogl_has_feature() function and for checking multiple features there is cogl_has_features() which takes a zero terminated vararg list of features. In addition to being able to check for individual features this also adds a way to query all the features currently available via cogl_foreach_feature() which will call a callback for each feature. Since the new functions take an explicit context pointer there is also no longer any ambiguity over when users can first start to query features. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-12 21:31:12 +00:00
if (enable && !cogl_has_feature (ctx, COGL_FEATURE_ID_POINT_SPRITE))
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
if (error)
{
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
_cogl_set_error (error,
COGL_SYSTEM_ERROR,
COGL_SYSTEM_ERROR_UNSUPPORTED,
"Point sprite texture coordinates are enabled for "
"a layer but the GL driver does not support it.");
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
else
{
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
static CoglBool warning_seen = FALSE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
if (!warning_seen)
g_warning ("Point sprite texture coordinates are enabled "
"for a layer but the GL driver does not support it.");
warning_seen = TRUE;
}
return FALSE;
}
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
if (authority->big_state->point_sprite_coords == enable)
return TRUE;
new = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, change);
if (new != layer)
layer = new;
else
{
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, change);
if (old_authority->big_state->point_sprite_coords == enable)
{
layer->differences &= ~change;
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
return TRUE;
}
}
}
layer->big_state->point_sprite_coords = enable;
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
return TRUE;
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
cogl_pipeline_get_layer_point_sprite_coords_enabled (CoglPipeline *pipeline,
int layer_index)
{
CoglPipelineLayerState change =
COGL_PIPELINE_LAYER_STATE_POINT_SPRITE_COORDS;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* FIXME: we shouldn't ever construct a layer in a getter function */
authority = _cogl_pipeline_layer_get_authority (layer, change);
return authority->big_state->point_sprite_coords;
}
snippet: Add a hook for the layer texture coordinate transformation This adds a hook called COGL_SNIPPET_HOOK_TEXTURE_COORD_TRANSFORM. This can be used to alter the application of the layer user matrix to a texture coordinate or it can bypass it altogether. This is the first per-layer hook that affects the vertex shader state so the patch includes the boilerplate needed to get that to work. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-28 19:58:15 +00:00
static void
_cogl_pipeline_layer_add_vertex_snippet (CoglPipeline *pipeline,
int layer_index,
CoglSnippet *snippet)
{
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_VERTEX_SNIPPETS;
CoglPipelineLayer *layer, *authority;
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
layer = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, change);
_cogl_pipeline_snippet_list_add (&layer->big_state->vertex_snippets,
snippet);
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
}
pipeline: Add a snippet hook for the texture lookup This adds a per-layer snippet hook for the texure lookup. Here the snippet can modify the texture coordinates used for the lookup or modify the texel resulting from the lookup. This is the first per-layer hook so this also adds the COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the boilerplate needed to make that work. Most of the functions used by the pipeline state to manage the snippet list has been moved into cogl-pipeline-snippet.c so that it can be shared with the layer state. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 17:36:03 +00:00
static void
_cogl_pipeline_layer_add_fragment_snippet (CoglPipeline *pipeline,
int layer_index,
CoglSnippet *snippet)
{
CoglPipelineLayerState change = COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS;
CoglPipelineLayer *layer, *authority;
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, change);
layer = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, change);
_cogl_pipeline_snippet_list_add (&layer->big_state->fragment_snippets,
snippet);
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= change;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
}
void
snippet: Move the hook to be a property of the snippet Instead of specifying the hook point when adding to the pipeline using a separate function for each hook, the hook is now a property of the snippet. The hook is set on construction and is then read-only. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 20:54:14 +00:00
cogl_pipeline_add_layer_snippet (CoglPipeline *pipeline,
int layer_index,
CoglSnippet *snippet)
pipeline: Add a snippet hook for the texture lookup This adds a per-layer snippet hook for the texure lookup. Here the snippet can modify the texture coordinates used for the lookup or modify the texel resulting from the lookup. This is the first per-layer hook so this also adds the COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the boilerplate needed to make that work. Most of the functions used by the pipeline state to manage the snippet list has been moved into cogl-pipeline-snippet.c so that it can be shared with the layer state. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 17:36:03 +00:00
{
snippet: Move the hook to be a property of the snippet Instead of specifying the hook point when adding to the pipeline using a separate function for each hook, the hook is now a property of the snippet. The hook is set on construction and is then read-only. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 20:54:14 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
_COGL_RETURN_IF_FAIL (cogl_is_snippet (snippet));
_COGL_RETURN_IF_FAIL (snippet->hook >= COGL_SNIPPET_FIRST_LAYER_HOOK);
if (snippet->hook < COGL_SNIPPET_FIRST_LAYER_FRAGMENT_HOOK)
snippet: Add a hook for the layer texture coordinate transformation This adds a hook called COGL_SNIPPET_HOOK_TEXTURE_COORD_TRANSFORM. This can be used to alter the application of the layer user matrix to a texture coordinate or it can bypass it altogether. This is the first per-layer hook that affects the vertex shader state so the patch includes the boilerplate needed to get that to work. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-28 19:58:15 +00:00
_cogl_pipeline_layer_add_vertex_snippet (pipeline,
layer_index,
snippet);
snippet: Move the hook to be a property of the snippet Instead of specifying the hook point when adding to the pipeline using a separate function for each hook, the hook is now a property of the snippet. The hook is set on construction and is then read-only. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 20:54:14 +00:00
else
_cogl_pipeline_layer_add_fragment_snippet (pipeline,
layer_index,
snippet);
pipeline: Add a snippet hook for the texture lookup This adds a per-layer snippet hook for the texure lookup. Here the snippet can modify the texture coordinates used for the lookup or modify the texel resulting from the lookup. This is the first per-layer hook so this also adds the COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the boilerplate needed to make that work. Most of the functions used by the pipeline state to manage the snippet list has been moved into cogl-pipeline-snippet.c so that it can be shared with the layer state. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 17:36:03 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
_cogl_pipeline_layer_texture_type_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1,
CoglPipelineEvalFlags flags)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
return authority0->texture_type == authority1->texture_type;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_texture_data_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1,
CoglPipelineEvalFlags flags)
{
cogl-pipeline: Fix comparing the texture data state for NULL textures When comparing the texture data for a pipeline layer it tries to get the GL texture handle out of the texture object. However it's valid for a layer to have a NULL texture object but in that case the code would just crash. This patch fixes it to compare the texture types when the texture object is NULL. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 13:56:40 +00:00
if (authority0->texture == NULL)
{
if (authority1->texture == NULL)
return (_cogl_pipeline_layer_get_texture_type (authority0) ==
_cogl_pipeline_layer_get_texture_type (authority1));
else
return FALSE;
}
else if (authority1->texture == NULL)
return FALSE;
else
{
GLuint gl_handle0, gl_handle1;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
cogl-pipeline: Fix comparing the texture data state for NULL textures When comparing the texture data for a pipeline layer it tries to get the GL texture handle out of the texture object. However it's valid for a layer to have a NULL texture object but in that case the code would just crash. This patch fixes it to compare the texture types when the texture object is NULL. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 13:56:40 +00:00
cogl_texture_get_gl_texture (authority0->texture, &gl_handle0, NULL);
cogl_texture_get_gl_texture (authority1->texture, &gl_handle1, NULL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
cogl-pipeline: Fix comparing the texture data state for NULL textures When comparing the texture data for a pipeline layer it tries to get the GL texture handle out of the texture object. However it's valid for a layer to have a NULL texture object but in that case the code would just crash. This patch fixes it to compare the texture types when the texture object is NULL. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 13:56:40 +00:00
return gl_handle0 == gl_handle1;
}
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_combine_state_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1)
{
CoglPipelineLayerBigState *big_state0 = authority0->big_state;
CoglPipelineLayerBigState *big_state1 = authority1->big_state;
int n_args;
int i;
if (big_state0->texture_combine_rgb_func !=
big_state1->texture_combine_rgb_func)
return FALSE;
if (big_state0->texture_combine_alpha_func !=
big_state1->texture_combine_alpha_func)
return FALSE;
n_args =
_cogl_get_n_args_for_combine_func (big_state0->texture_combine_rgb_func);
for (i = 0; i < n_args; i++)
{
if ((big_state0->texture_combine_rgb_src[i] !=
big_state1->texture_combine_rgb_src[i]) ||
(big_state0->texture_combine_rgb_op[i] !=
big_state1->texture_combine_rgb_op[i]))
return FALSE;
}
n_args =
_cogl_get_n_args_for_combine_func (big_state0->texture_combine_alpha_func);
for (i = 0; i < n_args; i++)
{
if ((big_state0->texture_combine_alpha_src[i] !=
big_state1->texture_combine_alpha_src[i]) ||
(big_state0->texture_combine_alpha_op[i] !=
big_state1->texture_combine_alpha_op[i]))
return FALSE;
}
return TRUE;
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_combine_constant_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1)
{
return memcmp (authority0->big_state->texture_combine_constant,
authority1->big_state->texture_combine_constant,
sizeof (float) * 4) == 0 ? TRUE : FALSE;
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
_cogl_pipeline_layer_sampler_equal (CoglPipelineLayer *authority0,
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer *authority1)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
/* We compare the actual sampler objects rather than just the entry
pointers because two states with different values can lead to the
same state in GL terms when AUTOMATIC is used as a wrap mode */
return (authority0->sampler_cache_entry->sampler_object ==
authority1->sampler_cache_entry->sampler_object);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_user_matrix_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1)
{
CoglPipelineLayerBigState *big_state0 = authority0->big_state;
CoglPipelineLayerBigState *big_state1 = authority1->big_state;
if (!cogl_matrix_equal (&big_state0->matrix, &big_state1->matrix))
return FALSE;
return TRUE;
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_point_sprite_coords_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1)
{
CoglPipelineLayerBigState *big_state0 = authority0->big_state;
CoglPipelineLayerBigState *big_state1 = authority1->big_state;
return big_state0->point_sprite_coords == big_state1->point_sprite_coords;
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
snippet: Add a hook for the layer texture coordinate transformation This adds a hook called COGL_SNIPPET_HOOK_TEXTURE_COORD_TRANSFORM. This can be used to alter the application of the layer user matrix to a texture coordinate or it can bypass it altogether. This is the first per-layer hook that affects the vertex shader state so the patch includes the boilerplate needed to get that to work. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-28 19:58:15 +00:00
_cogl_pipeline_layer_vertex_snippets_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1)
{
return _cogl_pipeline_snippet_list_equal (&authority0->big_state->
vertex_snippets,
&authority1->big_state->
vertex_snippets);
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: Add a snippet hook for the texture lookup This adds a per-layer snippet hook for the texure lookup. Here the snippet can modify the texture coordinates used for the lookup or modify the texel resulting from the lookup. This is the first per-layer hook so this also adds the COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the boilerplate needed to make that work. Most of the functions used by the pipeline state to manage the snippet list has been moved into cogl-pipeline-snippet.c so that it can be shared with the layer state. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 17:36:03 +00:00
_cogl_pipeline_layer_fragment_snippets_equal (CoglPipelineLayer *authority0,
CoglPipelineLayer *authority1)
{
return _cogl_pipeline_snippet_list_equal (&authority0->big_state->
fragment_snippets,
&authority1->big_state->
fragment_snippets);
}
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
static void
setup_texture_combine_state (CoglBlendStringStatement *statement,
CoglPipelineCombineFunc *texture_combine_func,
CoglPipelineCombineSource *texture_combine_src,
CoglPipelineCombineOp *texture_combine_op)
{
int i;
switch (statement->function->type)
{
case COGL_BLEND_STRING_FUNCTION_REPLACE:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_REPLACE;
break;
case COGL_BLEND_STRING_FUNCTION_MODULATE:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_MODULATE;
break;
case COGL_BLEND_STRING_FUNCTION_ADD:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_ADD;
break;
case COGL_BLEND_STRING_FUNCTION_ADD_SIGNED:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_ADD_SIGNED;
break;
case COGL_BLEND_STRING_FUNCTION_INTERPOLATE:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_INTERPOLATE;
break;
case COGL_BLEND_STRING_FUNCTION_SUBTRACT:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_SUBTRACT;
break;
case COGL_BLEND_STRING_FUNCTION_DOT3_RGB:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_DOT3_RGB;
break;
case COGL_BLEND_STRING_FUNCTION_DOT3_RGBA:
*texture_combine_func = COGL_PIPELINE_COMBINE_FUNC_DOT3_RGBA;
break;
}
for (i = 0; i < statement->function->argc; i++)
{
CoglBlendStringArgument *arg = &statement->args[i];
switch (arg->source.info->type)
{
case COGL_BLEND_STRING_COLOR_SOURCE_CONSTANT:
texture_combine_src[i] = COGL_PIPELINE_COMBINE_SOURCE_CONSTANT;
break;
case COGL_BLEND_STRING_COLOR_SOURCE_TEXTURE:
texture_combine_src[i] = COGL_PIPELINE_COMBINE_SOURCE_TEXTURE;
break;
case COGL_BLEND_STRING_COLOR_SOURCE_TEXTURE_N:
texture_combine_src[i] =
COGL_PIPELINE_COMBINE_SOURCE_TEXTURE0 + arg->source.texture;
break;
case COGL_BLEND_STRING_COLOR_SOURCE_PRIMARY:
texture_combine_src[i] = COGL_PIPELINE_COMBINE_SOURCE_PRIMARY_COLOR;
break;
case COGL_BLEND_STRING_COLOR_SOURCE_PREVIOUS:
texture_combine_src[i] = COGL_PIPELINE_COMBINE_SOURCE_PREVIOUS;
break;
default:
g_warning ("Unexpected texture combine source");
texture_combine_src[i] = COGL_PIPELINE_COMBINE_SOURCE_TEXTURE;
}
if (arg->source.mask == COGL_BLEND_STRING_CHANNEL_MASK_RGB)
{
if (statement->args[i].source.one_minus)
texture_combine_op[i] =
COGL_PIPELINE_COMBINE_OP_ONE_MINUS_SRC_COLOR;
else
texture_combine_op[i] = COGL_PIPELINE_COMBINE_OP_SRC_COLOR;
}
else
{
if (statement->args[i].source.one_minus)
texture_combine_op[i] =
COGL_PIPELINE_COMBINE_OP_ONE_MINUS_SRC_ALPHA;
else
texture_combine_op[i] = COGL_PIPELINE_COMBINE_OP_SRC_ALPHA;
}
}
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
cogl_pipeline_set_layer_combine (CoglPipeline *pipeline,
int layer_index,
const char *combine_description,
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
CoglError **error)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineLayerState state = COGL_PIPELINE_LAYER_STATE_COMBINE;
CoglPipelineLayer *authority;
CoglPipelineLayer *layer;
CoglBlendStringStatement statements[2];
CoglBlendStringStatement split[2];
CoglBlendStringStatement *rgb;
CoglBlendStringStatement *a;
int count;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), FALSE);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, state);
count =
_cogl_blend_string_compile (combine_description,
COGL_BLEND_STRING_CONTEXT_TEXTURE_COMBINE,
statements,
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
error);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
if (!count)
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
return FALSE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
if (statements[0].mask == COGL_BLEND_STRING_CHANNEL_MASK_RGBA)
{
_cogl_blend_string_split_rgba_statement (statements,
&split[0], &split[1]);
rgb = &split[0];
a = &split[1];
}
else
{
rgb = &statements[0];
a = &statements[1];
}
/* FIXME: compare the new state with the current state! */
/* possibly flush primitives referencing the current state... */
layer = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, state);
setup_texture_combine_state (rgb,
&layer->big_state->texture_combine_rgb_func,
layer->big_state->texture_combine_rgb_src,
layer->big_state->texture_combine_rgb_op);
setup_texture_combine_state (a,
&layer->big_state->texture_combine_alpha_func,
layer->big_state->texture_combine_alpha_src,
layer->big_state->texture_combine_alpha_op);
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent = _cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, state);
if (_cogl_pipeline_layer_combine_state_equal (authority,
old_authority))
{
layer->differences &= ~state;
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
goto changed;
}
}
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= state;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
changed:
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
pipeline->dirty_real_blend_enable = TRUE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
return TRUE;
}
void
cogl_pipeline_set_layer_combine_constant (CoglPipeline *pipeline,
int layer_index,
const CoglColor *constant_color)
{
CoglPipelineLayerState state = COGL_PIPELINE_LAYER_STATE_COMBINE_CONSTANT;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
CoglPipelineLayer *new;
float color_as_floats[4];
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, state);
color_as_floats[0] = cogl_color_get_red_float (constant_color);
color_as_floats[1] = cogl_color_get_green_float (constant_color);
color_as_floats[2] = cogl_color_get_blue_float (constant_color);
color_as_floats[3] = cogl_color_get_alpha_float (constant_color);
if (memcmp (authority->big_state->texture_combine_constant,
color_as_floats, sizeof (float) * 4) == 0)
return;
new = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, state);
if (new != layer)
layer = new;
else
{
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, state);
CoglPipelineLayerBigState *old_big_state = old_authority->big_state;
if (memcmp (old_big_state->texture_combine_constant,
color_as_floats, sizeof (float) * 4) == 0)
{
layer->differences &= ~state;
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
goto changed;
}
}
}
memcpy (layer->big_state->texture_combine_constant,
color_as_floats,
sizeof (color_as_floats));
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= state;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
changed:
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
pipeline->dirty_real_blend_enable = TRUE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
_cogl_pipeline_get_layer_combine_constant (CoglPipeline *pipeline,
int layer_index,
float *constant)
{
CoglPipelineLayerState change =
COGL_PIPELINE_LAYER_STATE_COMBINE_CONSTANT;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* FIXME: we shouldn't ever construct a layer in a getter function */
authority = _cogl_pipeline_layer_get_authority (layer, change);
memcpy (constant, authority->big_state->texture_combine_constant,
sizeof (float) * 4);
}
/* We should probably make a public API version of this that has a
matrix out-param. For an internal API it's good to be able to avoid
copying the matrix */
const CoglMatrix *
_cogl_pipeline_get_layer_matrix (CoglPipeline *pipeline, int layer_index)
{
CoglPipelineLayerState change =
COGL_PIPELINE_LAYER_STATE_USER_MATRIX;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (cogl_is_pipeline (pipeline), NULL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
authority = _cogl_pipeline_layer_get_authority (layer, change);
return &authority->big_state->matrix;
}
void
cogl_pipeline_set_layer_matrix (CoglPipeline *pipeline,
int layer_index,
const CoglMatrix *matrix)
{
CoglPipelineLayerState state = COGL_PIPELINE_LAYER_STATE_USER_MATRIX;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
CoglPipelineLayer *new;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, state);
if (cogl_matrix_equal (matrix, &authority->big_state->matrix))
return;
new = _cogl_pipeline_layer_pre_change_notify (pipeline, layer, state);
if (new != layer)
layer = new;
else
{
/* If the original layer we found is currently the authority on
* the state we are changing see if we can revert to one of our
* ancestors being the authority. */
if (layer == authority &&
_cogl_pipeline_layer_get_parent (authority) != NULL)
{
CoglPipelineLayer *parent =
_cogl_pipeline_layer_get_parent (authority);
CoglPipelineLayer *old_authority =
_cogl_pipeline_layer_get_authority (parent, state);
if (cogl_matrix_equal (matrix, &old_authority->big_state->matrix))
{
layer->differences &= ~state;
g_assert (layer->owner == pipeline);
if (layer->differences == 0)
_cogl_pipeline_prune_empty_layer_difference (pipeline,
layer);
return;
}
}
}
layer->big_state->matrix = *matrix;
/* If we weren't previously the authority on this state then we need
* to extended our differences mask and so it's possible that some
* of our ancestry will now become redundant, so we aim to reparent
* ourselves if that's true... */
if (layer != authority)
{
layer->differences |= state;
_cogl_pipeline_layer_prune_redundant_ancestry (layer);
}
}
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_get_texture (CoglPipelineLayer *layer)
{
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (_cogl_is_pipeline_layer (layer), NULL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
return _cogl_pipeline_layer_get_texture_real (layer);
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
_cogl_pipeline_layer_has_user_matrix (CoglPipeline *pipeline,
int layer_index)
{
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
authority =
_cogl_pipeline_layer_get_authority (layer,
COGL_PIPELINE_LAYER_STATE_USER_MATRIX);
/* If the authority is the default pipeline then no, otherwise yes */
return _cogl_pipeline_layer_get_parent (authority) ? TRUE : FALSE;
}
void
_cogl_pipeline_layer_get_filters (CoglPipelineLayer *layer,
CoglPipelineFilter *min_filter,
CoglPipelineFilter *mag_filter)
{
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer,
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
COGL_PIPELINE_LAYER_STATE_SAMPLER);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
*min_filter = authority->sampler_cache_entry->min_filter;
*mag_filter = authority->sampler_cache_entry->mag_filter;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
_cogl_pipeline_get_layer_filters (CoglPipeline *pipeline,
int layer_index,
CoglPipelineFilter *min_filter,
CoglPipelineFilter *mag_filter)
{
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
authority =
_cogl_pipeline_layer_get_authority (layer,
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
COGL_PIPELINE_LAYER_STATE_SAMPLER);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
*min_filter = authority->sampler_cache_entry->min_filter;
*mag_filter = authority->sampler_cache_entry->mag_filter;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
CoglPipelineFilter
pipeline: Expose min/mag filter getters This exposes cogl_pipeline_get_layer_{min,max}_filter functions so that applications can query back the filters set using cogl_pipeline_set_layer_filters(). Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-18 18:17:11 +00:00
cogl_pipeline_get_layer_min_filter (CoglPipeline *pipeline,
int layer_index)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineFilter min_filter;
CoglPipelineFilter mag_filter;
_cogl_pipeline_get_layer_filters (pipeline, layer_index,
&min_filter, &mag_filter);
return min_filter;
}
CoglPipelineFilter
pipeline: Expose min/mag filter getters This exposes cogl_pipeline_get_layer_{min,max}_filter functions so that applications can query back the filters set using cogl_pipeline_set_layer_filters(). Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-18 18:17:11 +00:00
cogl_pipeline_get_layer_mag_filter (CoglPipeline *pipeline,
int layer_index)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
CoglPipelineFilter min_filter;
CoglPipelineFilter mag_filter;
_cogl_pipeline_get_layer_filters (pipeline, layer_index,
&min_filter, &mag_filter);
return mag_filter;
}
CoglPipelineFilter
_cogl_pipeline_layer_get_min_filter (CoglPipelineLayer *layer)
{
CoglPipelineLayer *authority;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (_cogl_is_pipeline_layer (layer), 0);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
authority =
_cogl_pipeline_layer_get_authority (layer,
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
COGL_PIPELINE_LAYER_STATE_SAMPLER);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
return authority->sampler_cache_entry->min_filter;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
CoglPipelineFilter
_cogl_pipeline_layer_get_mag_filter (CoglPipelineLayer *layer)
{
CoglPipelineLayer *authority;
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_VAL_IF_FAIL (_cogl_is_pipeline_layer (layer), 0);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
authority =
_cogl_pipeline_layer_get_authority (layer,
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
COGL_PIPELINE_LAYER_STATE_SAMPLER);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
return authority->sampler_cache_entry->mag_filter;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
cogl_pipeline_set_layer_filters (CoglPipeline *pipeline,
int layer_index,
CoglPipelineFilter min_filter,
CoglPipelineFilter mag_filter)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglPipelineLayerState state = COGL_PIPELINE_LAYER_STATE_SAMPLER;
CoglPipelineLayer *layer;
CoglPipelineLayer *authority;
const CoglSamplerCacheEntry *sampler_state;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
texture: expose mipmap level in set region apis cogl_texture_set_region() and cogl_texture_set_region_from_bitmap() now have a level argument so image data can be uploaded to a specific mipmap level. The prototype for cogl_texture_set_region was also updated to simplify the arguments. The arguments for cogl_texture_set_region_from_bitmap were reordered to be consistent with cogl_texture_set_region with the source related arguments listed first followed by the destination arguments. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3a336a8adcd406b53731a6de0e7d97ba7932c1a8) Note: Public API changes were reverted in cherry-picking this patch
2012-11-09 17:55:54 +00:00
_COGL_RETURN_IF_FAIL (mag_filter == COGL_PIPELINE_FILTER_NEAREST ||
mag_filter == COGL_PIPELINE_FILTER_LINEAR);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
/* Note: this will ensure that the layer exists, creating one if it
* doesn't already.
*
* Note: If the layer already existed it's possibly owned by another
* pipeline. If the layer is created then it will be owned by
* pipeline. */
layer = _cogl_pipeline_get_layer (pipeline, layer_index);
/* Now find the ancestor of the layer that is the authority for the
* state we want to change */
authority = _cogl_pipeline_layer_get_authority (layer, state);
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
sampler_state =
_cogl_sampler_cache_update_filters (ctx->sampler_cache,
authority->sampler_cache_entry,
min_filter,
mag_filter);
_cogl_pipeline_set_layer_sampler_state (pipeline,
layer,
authority,
sampler_state);
}
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
const CoglSamplerCacheEntry *
_cogl_pipeline_layer_get_sampler_state (CoglPipelineLayer *layer)
{
CoglPipelineLayer *authority;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
authority =
_cogl_pipeline_layer_get_authority (layer,
COGL_PIPELINE_LAYER_STATE_SAMPLER);
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
return authority->sampler_cache_entry;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
_cogl_pipeline_layer_hash_unit_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
int unit = authority->unit_index;
state->hash =
_cogl_util_one_at_a_time_hash (state->hash, &unit, sizeof (unit));
}
void
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
_cogl_pipeline_layer_hash_texture_type_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
{
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
CoglTextureType texture_type = authority->texture_type;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
cogl-pipeline-layer: Use CoglTextureType instead of GL target enum Instead of storing the GLenum for the target of the last used texture for a layer it now stores the CoglTextureType instead. The state name has been renamed to 'texture type' instead of 'texture target'. Previously the default pipeline layer would store 0 here to represent that there is no texture. This has been changed to store COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers always have a valid value for the texture type. Any places that were previously fetching the texture from a layer to determine the target (for example when generating shaders or when enabling a particular texture target) now use the texture type instead. This means they will work even for layers that don't have a texture. This also changes it so that when binding a fallback texture instead of always using a 2D texture it will now use the default texture corresponding to the texture type of the layer. That way when the generated shader tries to do a texture lookup for that type of texture it will get a valid texture object. To make this work the patch adds a default texture for 3D textures to the context and also makes the default rectangle texture actually be a rectangle texture instead of using a 2D texture. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-09 12:52:45 +00:00
state->hash = _cogl_util_one_at_a_time_hash (state->hash,
&texture_type,
sizeof (texture_type));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
_cogl_pipeline_layer_hash_texture_data_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
GLuint gl_handle;
cogl_texture_get_gl_texture (authority->texture, &gl_handle, NULL);
state->hash =
_cogl_util_one_at_a_time_hash (state->hash, &gl_handle, sizeof (gl_handle));
}
void
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
_cogl_pipeline_layer_hash_sampler_state (CoglPipelineLayer *authority,
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
state->hash =
_cogl_util_one_at_a_time_hash (state->hash,
&authority->sampler_cache_entry,
sizeof (authority->sampler_cache_entry));
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
}
void
_cogl_pipeline_layer_hash_combine_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
unsigned int hash = state->hash;
CoglPipelineLayerBigState *b = authority->big_state;
int n_args;
int i;
hash = _cogl_util_one_at_a_time_hash (hash, &b->texture_combine_rgb_func,
sizeof (b->texture_combine_rgb_func));
n_args = _cogl_get_n_args_for_combine_func (b->texture_combine_rgb_func);
for (i = 0; i < n_args; i++)
{
hash =
_cogl_util_one_at_a_time_hash (hash, &b->texture_combine_rgb_src[i],
sizeof (b->texture_combine_rgb_src[i]));
hash =
_cogl_util_one_at_a_time_hash (hash, &b->texture_combine_rgb_op[i],
sizeof (b->texture_combine_rgb_op[i]));
}
hash = _cogl_util_one_at_a_time_hash (hash, &b->texture_combine_alpha_func,
sizeof (b->texture_combine_alpha_func));
n_args = _cogl_get_n_args_for_combine_func (b->texture_combine_alpha_func);
for (i = 0; i < n_args; i++)
{
hash =
_cogl_util_one_at_a_time_hash (hash, &b->texture_combine_alpha_src[i],
sizeof (b->texture_combine_alpha_src[i]));
hash =
_cogl_util_one_at_a_time_hash (hash, &b->texture_combine_alpha_op[i],
sizeof (b->texture_combine_alpha_op[i]));
}
state->hash = hash;
}
void
_cogl_pipeline_layer_hash_combine_constant_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
CoglPipelineLayerBigState *b = authority->big_state;
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
CoglBool need_hash = FALSE;
pipeline: split out all layer state apis As part of an on-going effort to get cogl-pipeline.c into a more maintainable state this splits out all the apis relating just to layer state. This just leaves code relating to the core CoglPipeline and CoglPipelineLayer design left in cogl-pipeline.c. This splits out around 2k more lines from cogl-pipeline.c although we are still left with nearly 4k lines so we still have some way to go! Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-07 23:42:22 +00:00
int n_args;
int i;
/* XXX: If the user also asked to hash the ALPHA_FUNC_STATE then it
* would be nice if we could combine the n_args loops in this
* function and _cogl_pipeline_layer_hash_combine_state.
*/
n_args = _cogl_get_n_args_for_combine_func (b->texture_combine_rgb_func);
for (i = 0; i < n_args; i++)
{
if (b->texture_combine_rgb_src[i] ==
COGL_PIPELINE_COMBINE_SOURCE_CONSTANT)
{
/* XXX: should we be careful to only hash the alpha
* component in the COGL_PIPELINE_COMBINE_OP_SRC_ALPHA case? */
need_hash = TRUE;
goto done;
}
}
n_args = _cogl_get_n_args_for_combine_func (b->texture_combine_alpha_func);
for (i = 0; i < n_args; i++)
{
if (b->texture_combine_alpha_src[i] ==
COGL_PIPELINE_COMBINE_SOURCE_CONSTANT)
{
/* XXX: should we be careful to only hash the alpha
* component in the COGL_PIPELINE_COMBINE_OP_SRC_ALPHA case? */
need_hash = TRUE;
goto done;
}
}
done:
if (need_hash)
{
float *constant = b->texture_combine_constant;
state->hash = _cogl_util_one_at_a_time_hash (state->hash, constant,
sizeof (float) * 4);
}
}
void
_cogl_pipeline_layer_hash_user_matrix_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
CoglPipelineLayerBigState *big_state = authority->big_state;
state->hash = _cogl_util_one_at_a_time_hash (state->hash, &big_state->matrix,
sizeof (float) * 16);
}
void
_cogl_pipeline_layer_hash_point_sprite_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
CoglPipelineLayerBigState *big_state = authority->big_state;
state->hash =
_cogl_util_one_at_a_time_hash (state->hash, &big_state->point_sprite_coords,
sizeof (big_state->point_sprite_coords));
}
snippet: Add a hook for the layer texture coordinate transformation This adds a hook called COGL_SNIPPET_HOOK_TEXTURE_COORD_TRANSFORM. This can be used to alter the application of the layer user matrix to a texture coordinate or it can bypass it altogether. This is the first per-layer hook that affects the vertex shader state so the patch includes the boilerplate needed to get that to work. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-28 19:58:15 +00:00
void
_cogl_pipeline_layer_hash_vertex_snippets_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
_cogl_pipeline_snippet_list_hash (&authority->big_state->vertex_snippets,
&state->hash);
}
pipeline: Add a snippet hook for the texture lookup This adds a per-layer snippet hook for the texure lookup. Here the snippet can modify the texture coordinates used for the lookup or modify the texel resulting from the lookup. This is the first per-layer hook so this also adds the COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the boilerplate needed to make that work. Most of the functions used by the pipeline state to manage the snippet list has been moved into cogl-pipeline-snippet.c so that it can be shared with the layer state. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-25 17:36:03 +00:00
void
_cogl_pipeline_layer_hash_fragment_snippets_state (CoglPipelineLayer *authority,
CoglPipelineLayer **authorities,
CoglPipelineHashState *state)
{
_cogl_pipeline_snippet_list_hash (&authority->big_state->fragment_snippets,
&state->hash);
}
Copy permalink