The surfaceless extension that Mesa advertises has been renamed to
EGL_KHR_surfaceless_context instead of a separate extension for the
GLES, GLES2 and GL APIs and the new extension has been ratified by
Khronos. Therefore the KMS backend no longer runs against Mesa master.
We could just rename the extension we check for, however Weston (the
sample Wayland compositor) has switched to just creating a dummy GBM
surface and not using the surfaceless extension at all. We should
probably do the same thing.
Using the surfaceless extension could be a good idea but we don't
really need to rely on it for KMS and we would want to do it for all
EGL backends, not just the KMS backend.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d4f22f8cb013d417c99ba03924538924191c2fe6)
cogl_framebuffer_set_{projection,modelview}_matrix don't need to read
from the matrix argument so they should probably take a const pointer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 710d6af053aca97935b54f9ff68858ef51f4482b)
When loading images on Quartz, the image is rendered into a bitmap
context using a buffer allocated with
_cogl_bitmap_new_with_malloc_buffer. However this buffer is not
initialised and by default Quartz will blend the source image with the
destination so if there are transparent parts in the source image it
will leave garbage in the destination. This patch changes the blend
mode to 'copy' so that it won't try to blend.
Before 5b785dd4 the buffer was cleared because it was allocated with
g_malloc0 so it was working in that case. Presumably it should be more
efficient to disable blending and avoid the clear though.
https://bugzilla.gnome.org/show_bug.cgi?id=680124
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5ba7f4e6837a539d92cbe45491f79a8926fd6828)
When the CoglGLES2Context is bound to read from a CoglOffscreen then
the result will be upside down from what GL expects if
glCopyTexImage2D is used directly. To fix that, this patch now wraps
glCopyTexImage2D and glCopyTexSubImage2D so that the copy is doing by
binding an FBO to the target texture and then rendering a quad
sampling from the texture in the offscreen framebuffer.
The rendering is done using the Cogl context rather than the GLES2
context because otherwise it would have to do a fair bit of work to
try and stash the old state on the context before setting up the state
to do the blit. The down side of this is that the contexts need to be
synchronized so that the rendering will be up-to-date. As far as I
understand from the GL spec, this requires a glFinish and then the
texture needs to be rebound in the new context because updates to
shared objects are guaranteed to be reflected until the object is
rebound.
GLES2 supports using glCopyTexImage2D for cube map textures. As Cogl
doesn't currently have support for cube maps, it is quite hard to get
that to work with this patch. For now attempts to copy to a cube map
texture will just be sliently ignored.
This patch also includes a test case which renders an image to the
framebuffer and then copies it to a texture. The texture is then
rendered back to the framebuffer and the contents are checked for the
correct orientation using glReadPixels.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 30b6da8134bad95267265e26685c7475f6c351c9)
This patch adds a hash table mapping texture object IDs to a struct so
that we can keep track of some of the state for each texture object.
Currently it will just track the width and height of the texture 2D
target.
Additionally it will now try to delete any texture objects that have
data created for them by the GLES2 context so that it won't leak them.
It only tracks objects that get data set on them, not all objects that
are bound because it is possible to use the GLES2 context with foreign
textures via cogl_gles2_texture_get_handle() and we don't want to
delete those.
In order to keep track of the currently bound texture object it also
needs to track the active texture unit.
Note that this state tracking will probably go wrong if GL throws an
error for invalid state. For example if glActiveTexture is called with
an invalid texture unit then GL will ignore the binding but Cogl will
assume it is valid and the state tracking will get out of sync.
Perhaps it would be good if Cogl could detect the errors but this is
difficult to do without consuming them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d8c72bb56cf3598fc57d629edc618f1bfa79f125)
Cogl has a different origin for texture coordinates than OpenGL so
that the results of rendering to a texture should leave the top of the
image at the texture coordinate 0,0 rather than the bottom. When a
GLES2 context is used to render to a Cogl texture via a CoglOffscreen
we don't really want the application to have to be aware of the
mismatch and flip the texture coordinates. To get that to work, this
patch now tracks all of the programs that the application generates
using the context and sneaks in an extra vertex shader with an
alternative main function. This main function multiplies the final
calculated gl_Position by a vector uniform which we can use to flip
the image. When the application uploads the source code for a vertex
shader we now replace any occurrences of the token 'main' with '_c31'
and this renamed function gets called from the replacement main
function. The token has a weird name so that it will be unlikely to
conflict with a variable name in the application's source but it also
needs to have the same number of characters as the original token so
that it won't affect column numbers in the error reporting.
We are also wrapping glGetShaderSource so that we can try to revert
the token name. The same goes for the error logs just in case the
error report mentions function names.
Both places that cause drawing to occur (glDrawElements and
glDrawArrays) are now also wrapped so that we can update the uniform
value whenever the program is used with a different type of
framebuffer from last time.
We additionally need to manually track the state for the viewport, the
stencil box and the front face because all of these will be affected
by whether we are flipping the image or not. Any attempts to change
these states will be queued and instead flushed at the last minute
before drawing.
There are still some known issues with this patch:
• glCopyTexImage2D and glCopyTexSubImage2D will do the wrong thing
when copying data from a CoglOffscreen. This could be quite fiddly
to solve.
• Point sprites won't flip correctly. To make this work we would need
to flip the gl_PointSprite builtin variable somehow. This is done in
the fragment shader not the vertex shader so flipping the calculated
gl_Position doesn't help here.
• The patch doesn't attempt to flip rendering to framebuffers for
textures created within the GLES2 context. This probably makes sense
because those textures are likely to be used within the GLES2
context in which case we want to leave the texture coordinates as
they are. However, if the texture is shared back out to Cogl with
cogl_gles2_texture_2d_new_from_handle then the texture will be
upside-down.
• The application can discover our secret uniform that we added via
glGetActiveUniform. It might be worth trying to disguise this by
wrapping that function although that could be quite fiddly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d589bf19e51f22c3241b2a18db10f22131ac126a)
memmem is a GNU libc extension that works like strstr except that the
size of the needle and the haystack are passed into the function
instead of using null-terminated strings.
This patch adds a wrapper function called 'cogl_util_memmem' so that
we can use this function. There is a configure check and if the
function is not available then a fallback implementation will be used.
Otherwise cogl_util_memmem is just defined to memmem.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1dd1b0a67f6238e13f7f9253fb03addada0541b7)
All of the functions that create and destroy shaders are now wrapped
in the CoglGLES2Context so that we can track some extra data for them.
There are hash tables mapping object IDs to the corresponding data.
The data is currently not used for anything but will be in later
patches.
The glUseProgram, glAttachShader and glDetachShader functions
additionally need to be wrapped because GL does not delete shader
objects that are in use. Therefore we need to have a reference count
on the data so we can recognise when the last use has been removed.
The IDs are assumed to be specific to an individual CoglGLES2Context.
This is technically not the case because all of the CoglGLES2Contexts
are in the same share list. However we don't really want this to be
the case so currently we will assume sharing the object IDs between
contexts is undefined behaviour. Eventually we may want to actually
enforce this.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 05dc1e34785ae5f5484cd398ecc5464bd8bd3dcd)
In GL, the default viewport and scissor should be set to the size of
the first surface that the context is bound to. If a CoglGLES2Context
is first used with an offscreen framebuffer then this surface will
actually be the dummy 1x1 window which will mess up the defaults. To
fix that, this patch makes it just always override the viewport and
scissor the first time the context is bound to something.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 02567b3e6b64e6849b9f7c6aa2137401be7ece8d)
Since 0773107deb9ede the prototype for
cogl_wayland_display_set_compositor_display() has moved into
cogl-wayland-server.h but cogl-display.c wasn't updated to include this
header.
(cherry picked from commit f6ccff9992fcfb9497ce91dd299460362476ba7a)
We need to avoid including wayland-server.h or wayland-client.h
indirectly when including cogl.h because there are overlapping typedef
names between the client and server wayland headers and we can't assume
whether Cogl is being used client or server side. This moves the
prototype for cogl_wayland_display_set_compositor_display() into
cogl-wayland-server.h which Cogl apps must include explicitly if the
want access to server side Cogl Wayland symbols.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 0773107deb9eded408e2801f217462c5d551f15a)
The header guard for cogl-texture-2d-private.h was
__COGL_TEXTURE_2D_H. This would conflict with the header guard for
cogl-texture-2d.h except there a small typo ('TEXURE') so that it
was subtly different. This fixes them both to make more sense.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 222ec4d009973cb62020a9da05f72dea41460b33)
This function should take an extra third paramter to specify whether
the procedure is in core or not. The parameter is not used so this
patch just fixes an annoying warning.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit eed4ac80cd8c3fa1859493c9bb00547038be6095)
This just gets rid of some annoying warnings.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3d0aea04d1f6a8094b749e20a59d8a9a95a6235e)
The cogl-texture-2d-private.h header checks for the presence of
EGL_KHR_image_base before declaring
_cogl_egl_texture_2d_new_from_image. This define will only be
available if the EGL headers are included so we should make sure that
happens. This was resulting in a warning complaining that the function
was not previously declared.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit bd4840d7858efcf30eb5cf5d6fd0d39bdd59d1c1)
This adds two new configuration environment variables:
COGL_DISABLE_GL_EXTENSIONS and
COGL_OVERRIDE_GL_VERSION
The variables can also be set in the cogl.conf file using the same
names.
The first one is a list of GL extension names separated by commas.
When set Cogl will assume any extension listed here is not available
by removing it from the string returned from
glGetString(GL_EXTENSIONS). If the string is set in both the config
file and the environment variable then the union of the two lists will
be used.
The second overrides the value returned from glGetString(GL_VERSION).
If the string is set in both places the version from the environment
variable will take priority.
These are sometimes useful for debugging Cogl to test the various
combinations of extensions. It could also be useful to work around
driver bugs where an extension is badly supported and it would be
better not to use it.
The variables in cogl-config that just set a global char * variable
have been put together in an array instead of having a separate blob
of code for each one in order to make it simpler to add new variables.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ec69c2dc576c78664e0b73879365cb7414ecf441)
Someone trying to compile cogl (ThijsNL on irc0 for the Rasberry Pi
stumbled into that one. GLXDrawable may not be defined in a pure EGL/X
environment.
Change it to Window, the type used for XConfigureEvent.window.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f05d6923fff28b1d167a391d486e319743c49215)
This doesn't appear to be used anywhere in the code since it was added
in 1cc3ae69. Dead code is confusing so let's remove it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 41928d0ac528acf4ba89b5b27d7ca7ac5501b194)
Otherwise, X11 identifiers may leak and cause havoc in big applications
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ed0cdca0eca815543619fe72fbd42d662d53f92d)
When multiplying two quaternions, we now implicitly copy the components
of the 'a' argument so that the result can be reliably written back to
the 'a' argument quaternion without conflicting with the multiplication
itself. This is consistent with the cogl_matrix_multiply() api which
allows the 'result' and 'a' arguments to point to the same matrix. In
debug builds Cogl will assert that the 'b' and 'result' arguments don't
point to the same quaternion.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 207527313a8957789390069e84189254cf41e88f)
When freeing a CoglOnscreen we weren't freeing the state associated with
swap notification callbacks.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 70bc12fe20fa1be4eac58356861a730f18d6b59e)
This fixes _cogl_memory_stack_free to ensure we don't dereference freed
memory as we iterate the sub-stacks to free them.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 1d27fedef9c599aa9976b809f18e0da1913cec26)
This adds api to be able to request that the window system allows a
given onscreen framebuffer to be resizable, and api to add and remove
resize handlers to be called whenever the framebuffer does actually
change size.
The new functions are:
cogl_onscreen_{get,set}_resizable()
cogl_onscreen_{add,remove}_resize_handler()
The examples cogl-hello and cogl-x11-foreign have been updated to use
the new api. To smoke test how Cogl updates the viewport automatically
in response to window resizes the cogl-hello test doesn't explicitly
respond to resize events by setting the viewport and cogl-x11-foreign
responds by setting a viewport that is offset by a quarter of the
window's width/height and half the width and height of the window.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a1a8cc00bfa2cecaf1007aec5f3dd95dc07b1786)
When using the GLES2 driver with a pipeline layer that has point
sprite coordinates enabled it extracts the texture coordinates from
the gl_PointCoord builtin instead of cogl_tex_coord_in[*].
gl_PointCoord is not quite the same as the regular texture coordinates
because it is only a vec2 instead of a vec4. This used to work ok
because either set of texture coordinates would always immediately be
accessed using a swizzle of '.st' so it would effectively be converted
to a vec2 anyway. However since the snippet hook for texture lookups
was added the texture coordinates are now passed to a function to
perform the actual lookup instead. This function always takes a vec4
so the shader would not compile. This patch fixes it to construct a
vec4 from gl_PointCoord by setting the third and fourth components to
0.0 and 1.0.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit cb3409b23caf324a548f82cfb88acc684cc71930)
Otherwise, if a texture is created before all the other FBOs, a new
atlas will be created, with a FBO with COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL
causing last_offscreen_allocate_flags to be 0.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7d2156785da8196e129eb393efb0d09093c4783e)
This adds some android specific api for creating a CoglBitmap from an
Android asset.
As part of the work it also seemed like a good time to change the
internal bitmap constructors to take an explicit CoglContext argument
and so the public cogl_bitmap_new_from_file() api was also changed
accordingly to take a CoglContext pointer as the first argument.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 099d6d1b505b55bbd09c50d081deb41ab5764e19)
Since we aren't able to break APIs on the 1.12 branch this cherry-pick
skips the change to cogl_bitmap_new_from_file()
wingdi.h which gets included from windows.h #defines ERROR to 0 so we
can't use it as a label in Cogl. This patch changes it to be error in
lower case instead.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e9bac2755c2cba84c82a856d369a30560d19a32e)
According to the EGL spec, eglGetProcAddress should only be used to
retrieve extension functions. It also says that returning non-NULL
does not mean the extension is available so you could interpret this
as saying that the function is allowed to return garbage for core
functions. This seems to happen at least for the Android
implementation of EGL.
To workaround this the winsys's are now passed down a flag to say
whether the function is from the core API. This information is already
in the gl-prototypes headers as the minimum core GL version and as a
pair of flags to specify whether it is available in core GLES1 and
GLES2. If the function is in core the EGL winsys will now avoid using
eglGetProcAddress and always fallback to querying the library directly
with the GModule API.
The GLX winsys is left alone because glXGetProcAddress apparently
supports querying core API and extension functions.
The WGL winsys could ideally be changed because wglGetProcAddress
should also only be used for extension functions but the situation is
slightly different because WGL considers anything from GL > 1.1 to be
an extension so it would need a bit more information to determine
whether to query the function directly from the library.
The SDL winsys is also left alone because it's not as easy to portably
determine which GL library SDL has chosen to load in order to resolve
the symbols directly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 72089730ad06ccdd38a344279a893965ae68cec1)
Since we aren't able to break API on the 1.12 branch
cogl_get_proc_address is still supported but isn't easily able to
determine whether the given name corresponds to a core symbol or
not. For now we just assume the symbol being queried isn't part
of the core GL api and update the documentation accordingly.
According to the GLES1/2 spec, the transpose argument of
glUniformMatrix* should always be FALSE. Cogl directly exposes the
transposedness of the uniform value in
cogl_pipeline_set_uniform_matrix and we were previously passing this
value on to GL. This patch makes it instead just always transpose the
matrix in Cogl itself when copying the value to the CoglBoxedValue. It
doesn't seem like there could be much advantage to letting GL
transpose the uniform value and at least Mesa just does a very similar
loop to handle the transpose.
Mesa has started being more pedantic about this which was making
test_pipeline_uniforms fail.
http://cgit.freedesktop.org/mesa/mesa/commit/?id=60e8a4944081b42127b3
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit f42ee670ff663d03073d6b1038b21a0aa1b3ec2b)
Comments are interpreted as docbook snippets and <pre> is from html. The
closest maching tag for inline content seems to be <literal>.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 66c9f26dfb3133f43d319128d6636f793a1ceb4a)
The first argument has been removed from the function. Update the
example accordingly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 06e47af3144565bdf85abf8ae561c7ceeafa2cbc)
Contrary to the other inversion functions, invert_matrix_3d() does not
initialize the inverse to the identity and then only touches the
elements it cares about. Problem is the ww component is left alone,
which makes everything go to a black hole when using an inverse matrix
as the transform matrix of a framebuffer.
This is how cameras are typically implemented, they have a transform
and the framebuffer matrix stack is initialized with the inverse
of that transform. A gdb session gives away what happens:
The camera model view matrix, slightly rotation around the X axis:
camera mv 1.000000 0.000000 0.000000 0.000000
camera mv 0.000000 0.984808 -0.173648 0.000000
camera mv 0.000000 0.173648 0.984808 10.000000
camera mv 0.000000 0.000000 0.000000 1.000000
Breakpoint 5, invert_matrix_3d (matrix=0x8056b58) at ./cogl-matrix.c:671
671 const float *in = (float *)matrix;
(gdb) p *matrix
$1 = {xx = 1, yx = 0, zx = 0, wx = 0, xy = 0, yy = 0.98480773,
zy = 0.173648164, wy = 0, xz = 0, yz = -0.173648164, zz = 0.98480773,
wz = 0, xw = 0, yw = 0, zw = 10, ww = 1, inv = {0 <repeats 16 times>},
type = 6, flags = 1030, _padding3 = 0}
(gdb) finish
Run till exit from #0 invert_matrix_3d (matrix=0x8056b58)
at ./cogl-matrix.c:671
0x00141ced in _cogl_matrix_update_inverse (matrix=0x8056b58)
at ./cogl-matrix.c:1123
1123 if (inv_mat_tab[matrix->type](matrix))
Value returned is $2 = 1
(gdb) p *matrix
$3 = {xx = 1, yx = 0, zx = 0, wx = 0, xy = 0, yy = 0.98480773,
zy = 0.173648164, wy = 0, xz = 0, yz = -0.173648164, zz = 0.98480773,
wz = 0, xw = 0, yw = 0, zw = 10, ww = 1, inv = {1, 0, 0, 0, 0, 0.98480773,
-0.173648164, 0, 0, 0.173648164, 0.98480773, 0, -0, -1.73648167,
-9.84807777, 0}, type = 6, flags = 1030, _padding3 = 0}
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9a19ea0147eb316247c45cbba6bb70dec5b9be4c)
Some drivers have good support for GLSL but don't have the complete
set of features needed to advertise GL 2.0 support. We should accept
the three old GLSL extensions (GL_ARB_shader_objects,
GL_ARB_vertex_shader and GL_ARB_fragment_shader) to support shaders on
these drivers.
This patch splits the shader functions into four sections :- those
that are provided only in GL 2.0, those that have the same name in the
shader objects extension, those that are provided by the vertex
shader extension (they all share the same name) and those that have a
different name in the shader objects extension.
If GL 2.0 is not supported but all three of the extensions are then
the pointers to the GL2-only functions will be replaced to point to
the equivalent functions from the extensions. That way the rest of the
Cogl source doesn't have to worry about the name differences.
https://bugzilla.gnome.org/show_bug.cgi?id=677078
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 71ecb51bd20dc3053b4221961b57e5a2b1029bdf)
If cogl_pipeline_remove_layer is called on a copied pipeline to remove
a parent layer then it will still end up calling
_cogl_pipeline_remove_layer_difference on the layer. This function
was directly trying to remove the layer from the pipeline's list of
layer differences. However in the child pipeline the layer isn't in
the list because it is unchanged from its parent. The function had an
assertion to verify that this situation wasn't hit so in a debug build
it would just bail out.
This patch removes the assertion and changes it to only remove the
layer if it is owned by the pipeline. Otherwise it just sets the
COGL_PIPELINE_STATE_LAYERS difference as normal and decrements the
number of layers. This will cause it to successfully remove the layer
because either it is the last layer in which case it will be ignored
after n_layers is decreased or if it is in the middle of the list then
the subsequent layers will all be shifted down so there will be a
replacement layer difference.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 88e73dd93fa09a158064a946ab229591a5888b97)
This adds an alternate version of the SDL winsys using the SDL 2 API.
The two versions are mutually exclusive and share the same
CoglWinsysID. Version 2 of SDL fits a little bit better with Cogl
because it supports multiple windows and the video subsystem can be
initialised entirely independently of the rest of the subsystems.
The SDL2 winsys creates an invisible dummy window in order to bind the
GL context after creating the Cogl display. This is similar to how the
X11 winsys's work.
SDL2 seems to support compiling with support for both GL and GLES.
However there doesn't seem to be a way to select between the two
backends outside of SDL. In fact if you do compile them both in it
seems to break down because it will always try to use the window
system functions from the GLES backend because those are filled in
second in the vtable. However when creating the window it will always
prefer to use the GL function to choose a visual. This function gets
confused because the GL backend has not been initialised at that
point. The Cogl backend therefore just leaves it up to SDL to pick a
sensible backend. It will then verify that it picked a GL library
which matches the Cogl driver by checking the string from
glGetString(GL_VERSION).
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 6cb5ab41355e7bfe28f367cf4afa39a7afcfeec2)
When having the [0, 0, 0] vector, normalize() won't try to divide by 0
and thus it's always safe to use that funtion.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 64370e7ddd32f25556a1792c00d14adc48a81d45)
Until now, we hardcoded the internal format to GL_RGBA and used the
internal format returned by pixel_format_to_gl() as the format for
checking the texture size and format we're asked to create.
Let's use the proper internal format/format from now on.
This is needed as a later patch introduces DEPTH and DEPTH_STENCIL
textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ec45f60ee2545f88302da314bcdbe1439c4ba9c9)
Missing bit of 4bb6eff3dbd50d8fef7d6bdbed55c5aaa70036a8
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1674cf28f1f5b71bd25a1f253c99825d427dd243)
The y translation was being initialised with the z value and the z
translation was being left as 0.0.
(cherry picked from commit b44feb617ecb9cbf7d53f0d745f686c17ef3246d)
When rendering the debug wireframe Cogl generates a child pipeline of
the application's pipeline to replace the fragment processing.
Previously it was creating a new snippet every time something was
drawn. Cogl doesn't attempt to compare the contents of snippets when
looking in the program cache for a matching pipeline so this would
cause it to generate a new program for every primitive. It then quite
quickly ends printing the warning about there being more than 50
programs in the cache. To fix that this patch makes it cache the
snippet so that Cogl can successfully recognise that it already has a
program generated for the new pipeline.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit c4bb08ee8767b5320980dba10b20921393cb5613)
Previously the CoglDrawFlags passed to
_cogl_framebuffer_draw_indexed_attributes when drawing is redirected
to draw a wireframe are overriden to avoid validating the pipeline,
flushing the framebuffer state and flushing the journal. This ends up
breaking scenes that only contain models drawn from attributes in the
application because nothing will flush the matrices. It seems to make
more sense to just use whatever draw flags were passed from the
original draw command so that it will flush the matrices if the caller
was expecting it.
One problem with this is that if the wireframe causes the journal to
be flushed then it will already have temporarily disabled the
wireframe debug flag so the journal will not be drawn with wireframes.
To fix this the patch adds a CoglDrawFlag to disable the wireframe and
uses that instead of disabling the debug flag.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 283f6733e63ba65d9921f45868edaabbd9420a61)
Previously if an application does not use the matrix stack as a stack
but instead just loads its own matrices for each frame using
cogl_framebuffer_set_modelview_matrix then it will continously push
OP_LOAD entries on the stack and the stack will grow forever. This
patch fixes that use case by resetting the top of the stack to the
last save entry whenever something is pushed that replaces the
previous matrix on the stack.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d31ed33241a9e9e3bc25f01b2614678827a7a9aa)
This adds the following new functions to apply a rotation described by
a euler or a quaternion to either a CoglMatrix or directly to the
modelview stack of a framebuffer:
cogl_matrix_rotate_quaternion
cogl_matrix_rotate_euler
cogl_framebuffer_rotate_quaternion
cogl_framebuffer_rotate_euler
The direct framebuffer functions have corresponding functions in the
CoglMatrixStack to store an entry describing the rotation.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5064315678b496395e1d01f266f322d73e55e324)
The _cogl_matrix_entry_equal function has a large switch statement to
do the right kind of comparison for the entry. However most of the
entries have a return statement that is only conditionally reached.
There were no corresponding break statements to the case labels so
presumably if the comparison succeeded for the correct entry type it
would also flow through and try the comparison for the next type which
would be extremely unlikely to pass.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 339db0f9cc3ee2bee4c56f9cb05dcb4ddd6815ed)
This creates a matrix to represent the given euler rotation. This
should be more efficient than creating the matrix by doing three
separate rotations because no separate intermediate matrices are
created and no matrix multiplication is needed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e66d9965897999a4889063f6df9a20ea6abf97fe)
The quaternion is not modified so for consistency with the rest of the
API it should probably be const.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 7fa8c05c2ffb90cba03289a04e37866efc0890a5)
