We do, in fact, need freezing to affect window geometry, so that
move-resize operations (such as an interactive resize from the
left, or a resize of a popup centered by the application) occur
atomically.
So to make map effects work properly, only exclude the initial
placement of a window from freezing. (In the future, we may want
to consider whether pure moves of a window being done in response
to a user drag should also be excluded from freezing.)
Rename meta_window_sync_actor_position() to
meta_window_sync_actor_geometry() for clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=693922
The WM spec requires _NET_WM_FRAME_DRAWN to *always* be sent when
there is an appropriate update to the sync counter value. We were
potentially missing _NET_WM_FRAME_DRAWN when an application did a
spontaneous update during an interactive resize and during effects.
Refactor the code to always send _NET_WM_FRAME_DRAWN, even when
a window is frozen.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
During resizing, An odd counter value (indicating the beginning of a frame)
shouldn't cause us to redraw and start a new frame, only an even counter
value. This was causing the frozen state for the window frame counter to
overlap the frozen state for the resize, causing the window not to be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
In different places we checked the grab op differently when determing
whether we are using _NET_WM_SYNC_REQUEST. This was somewhat covered
up previously by the fact that we only had a sync alarm when using
_NET_WM_SYNC_REQUEST, but that is no longer the case, so consistently
use meta_grab_op_is_resizing() everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When a client is drawing as hard as possible (without sleeping
between frames) we need to draw as soon possible, since sleeping
will decrease the effective frame rate shown to the user, and
can also result in the system never kicking out of power-saving
mode because it doesn't look fully utilized.
Use the amount the client increments the counter value by when
ending the frame to distinguish these cases:
- Increment by 1: a no-delay frame
- Increment by more than 1: a non-urgent frame, handle normally
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Resizing the frame triggers creation of a new backing pixmap for the
window, so we should do that first before we resize the client window
and mess up the contents of the old backing pixmap.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When the application provides the extended second counter for
_NET_WM_SYNC_REQUEST, send a client message with completion
information after the next redraw after each counter update
by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
If an application provides two values in _NET_WM_SYNC_REQUEST_COUNTER,
use that as a signal that the applications wants an extended behavior
where it can update the counter as well as the window manager. If the
application updates the counter to an odd value, updates of the
window are frozen until the counter is updated again to an even value.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of creating a new alarm each time we resize a window
interactively, create an alarm the first time we resize a window
and keep it around permanently until we unmanage the window.
Doing it this way will be useful when we allow the application to
spontaneously generate sync request updates to indicate
frames it is drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Replace the unused meta_compositor_set_updates() with
a reversed-meaning meta_compositor_set_updates_frozen(), and use
it to implement freezing application window updates during
interactive resizing. This avoids drawing new areas of the window
with blank content before the application has a chance to repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Some windows may already have event masks on them that we've selected
for, especially if we're using GTK+ windows. In particular, this fixes
window menus in the XI2 port.
https://bugzilla.gnome.org/show_bug.cgi?id=690581
This new hint allows compositors to know what portions of a window
will be obscured, as a region above them is opaque. For an RGB window,
possible to glean this information from the bounding shape region of
a client window, but not for an ARGB32 window. This new hint allows
clients that use ARGB32 windows to say which part of the window is
opaque, allowing this sort of optimization.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
Using a public method for setting the (cached) icon geometry rather
than accessing the struct members directly allows setting the icon
geometry from extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=692997
We have some code in gnome-shell that does the equivalent of:
window.get_workspace() == workspace || window.is_on_all_workspaces();
which is a bit unwieldy. We already have a method in mutter,
so use that and document it.
https://bugzilla.gnome.org/show_bug.cgi?id=691744
Currently, we ping windows only when attempting to delete them, but
if the application is not responding, we want to show the dialog
as soon as possible. Given that we cannot be passively notified that
the window stopped responding with the current X11 protocol, a good
workaround is to ping the window when activating it.
If the window stops responding while active, it is expected the user
will try to switch window or open the overview, and when coming back
he'll get the failure dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
We want to maintain the invariant that an attached modal dialog is always
of type MODAL_DIALOG, so recompute is_attached_dialog() when the window
type changes.
https://bugzilla.gnome.org/show_bug.cgi?id=690454
In random places that are not grabs, we selected for events on
things like the root window, stage window, COW and more. Switch
these over to using the proper XI2 APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
As calling XIGrabDevice multiple times will change it, just
drop the XChangeActivePointerGrab path and just go down the
XIGrabPointer path always.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Mechanically transform the event processing of mutter to care
about XI2 events instead of Core Events. Core Events will be left
in the dust soon, and removed entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
This removes some duplicate event type checks, and will make
the code cleaner in the future when we want to make the grab_op_event
handler take an XIDeviceEvent directly.
Based on a patch by Owen Taylor <otaylor@fishsoup.net>
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Since we want nice alt-tab applications for gnome-shell, we should up the
limit to 96. In the future, we probably want to get rid of the icon-cache,
and allow looking up a correctly sized icon directly from the window.
To prevent app breakage, set the legacy WM_HINTS pixmap size directly to
32x32.
https://bugzilla.gnome.org/show_bug.cgi?id=689651
When using the show-desktop shortcut with no desktop window, unshowing
will focus the second-most-recently-used window. If we find a desktop
window, it will be focused explicitly and everything works as expected;
however without a desktop window, we end up hiding the focus window,
which will use focus_default_window() with the not_this_one parameter
to move focus away. We used to get away with this, as the not_this_one
parameter was ignored until commit e257580b94, now with bug 675982
fixed, we need to explicitly handle the show-desktop case.
https://bugzilla.gnome.org/show_bug.cgi?id=686928
If someone plugs in a new monitor, while all their regular windows
should move in absolute X coordinates to ensure they stay on the
same monitor, the desktop window should stay put.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
When we consider tiling a special case of maximization, it makes
more sense to always unmaximize to the normal state rather than
restoring a previous tile state.
https://bugzilla.gnome.org/show_bug.cgi?id=677565
Currently we decide whether a modal dialog should be attached or not
when mapping it, i.e. we don't pick up preference changes that happen
while the dialog is up. It's not really a big deal given that modal
dialogs are usually transitory, but it's easy enough to add a bit of
extra polish ...
https://bugzilla.gnome.org/show_bug.cgi?id=679904
Side-by-side tiling is conceptually very close to maximization
("half-maximized"), so it makes sense to also hide the titlebar
in this state if requested by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=679290
Similar to meta_screen_get_primary_monitor, this returns a monitor index.
The monitor that the pointer is on. The previous private implementation
has been renamed to meta_screen_get_current_monitor_info.
https://bugzilla.gnome.org/show_bug.cgi?id=642591
It is impossible to switch to other windows when keep-on-top is set
for maximized windows; given that keep-on-top is only ever useful
to keep a window visible while focusing a different window, the
current behavior is pointless. So ignore keep-on-top while a window
is maximized.
https://bugzilla.gnome.org/show_bug.cgi?id=673581
Starting the auto-maximize process on a window like a
META_WINDOW_DESKTOP window that is not maximizable gets placement into
a confused state and eventually results in the window being positioned
at the wrong position (the position that an auto-maximized window would
be restored to.)
https://bugzilla.gnome.org/show_bug.cgi?id=673566
"warning: 'match_tile_mode' may be used uninitialized in this function", it
complains. It thinks it's not unused because of other values of
window->tile_mode, but other complex logic ensures that it can't be
META_TILE_MAXIMIZED, so this is a safe commit.
Windows that have minimum widths larger than the screen can't be maximized,
even though we put them in a maximized state and allow users to do so:
the window just won't change size and position. Fix this by simply not giving
the option to maximize, like what happens for non-resizable windows.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
A lot of code did something similar to:
MetaFrameBorders borders;
if (window->frame)
meta_frame_calc_borders (window->frame, &borders);
else
meta_frame_borders_clear (&borders);
Sometimes, the else part was omitted and we were unknowingly using
uninitalized values for OR windows. Clean this up by just testing
for a NULL frame in meta_frame_calc_borders and clearing for the
caller if so.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
Since we're going to be evaluating the work area at startup now, we need
to make sure that we don't iterate over workspaces before they're assigned.
The easiest way to do this is to make sure that meta_window_get_workspaces
doesn't crash.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
Returns the matching tiled window. This is the topmost tiled window in a
complementary tile mode that is:
- on the same monitor;
- on the same workspace;
- spanning the remaining monitor width;
- there is no 3rd window stacked between both tiled windows that's
partially visible in the common edge.
https://bugzilla.gnome.org/show_bug.cgi?id=643075
Windows that start up in a size that is almost as big as the workarea create
extra work for the user (resizing or maximizing) so save the user's time by
detecting such windows and automaximize them.
https://bugzilla.gnome.org/show_bug.cgi?id=671677
Basically we don't really want to create windows that are almost maximized in
size but not actually maximized. This creates work for the user and makes it
very difficult to use and resize manually.
So set the newly unmaximized window size to the previously used size or 80% of the
size of the current workarea (attempting to retain natural aspect ratio if
possible), whichever is smaller.
https://bugzilla.gnome.org/show_bug.cgi?id=671677
After _unmanage the object is semantically dead even if technically it's not,
so remove the prefs listener here to prevent it being called for a dead
object.
In particular this fixes a crash when starting up gnome-shell with at least
one gimp utility window opened which causes mutter to create a MetaWindow for
it only to immediately get an UnmapNotify afterwards which causes mutter to
unmanage the MetaWindow. Afterwards prefs_changed_callback is called for this
dead MetaWindow and tries to dereference the window->monitor pointer which is
already NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=671087
For maximized windows, titlebars cannot be used to reposition or
scale the window, so if an application does not use it to convey
useful information (other than the application name), the screen
space occupied by titlebars could be put to better use.
To account for this use case, a setting for requesting that windows'
titlebars should be hidden during maximization has been added to
GTK+, add support for this in the window manager.
https://bugzilla.gnome.org/show_bug.cgi?id=665617
The current code requires windows to be resizable to be considered
for tiling, which excludes all maximized/tiled windows. While this
restriction concurs with the desired behavior for edge-tiling, it
feels overly restrictive for keybindings.
As the edge-tiling code in update_move() already ensures the above
restriction, it seems save to remove it from the can_tile_maximized()
function, assuming that windows that are not meant to be tiled or
maximized won't provide a maximize function.
https://bugzilla.gnome.org/show_bug.cgi?id=648700
Usually tiling involves a size change and the frame is redrawn
automatically, however this is not the case when switching directly
between left- and right-tiled.
Ensure that a redraw happens in that case as well.
https://bugzilla.gnome.org/show_bug.cgi?id=648700
Move preferences to GSettings, using mainly shared schemas from
gsettings-desktop-schemas.
Unlike GConf, GSettings support is not optional, as Gio is already
a hard dependency of GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=635378
meta_window_move_resize_frame operates much like
meta_window_move_resize, but ensures the window
and its frame (if present) will fit within the
specified dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=651899
If we are moving in snap mode (shift pressed) we don't want to tile. We must
also cancel any pending tiling if snap mode is activated during the move drag.
https://bugzilla.gnome.org/show_bug.cgi?id=662270
meta_window_get_current_tile_area() computes the area where the tiled window
should be based on the current pointer position but that's only meaningful
when the user is actually dragging the window.
When running the tiling constrain the pointer might be on other monitor and at
that point the window jumps to this other monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=642580
Since the frame window size that meta_window_move_resize() uses depends
on whether the window has horizontal/vertical resize functionality, we
need to update this flag before we resize the window.
https://bugzilla.gnome.org/show_bug.cgi?id=659854
If a window had a type hint intended for override-redirect windows
like NOTIFICATION, we ended up with a window that was decorated but
with a frame type of FRAME_TYPE_LAST, causing assertion failures.
Fix this by making recalc_window_features() just call
meta_window_get_frame_type().
https://bugzilla.gnome.org/show_bug.cgi?id=599988
_NET_FRAME_EXTENTS should contain the difference between where a window asked
to be placed, and where it is. Ideally, this should be the same as the visible
extents.
https://bugzilla.gnome.org/show_bug.cgi?id=659848
A window can specify geometry that it is placed at. We need to exclude invisible
borders when calculating where to place the window, otherwise the window will have
a strange offset.
https://bugzilla.gnome.org/show_bug.cgi?id=659848
If XRANDR is availible, we track the first (or primary) output per
crtc (== xinerama monitor) so when the monitors change we can try
to find the same output and move windows there. If we can't find the
original monitor in the new set (or XRANDR is not supported) we move
the window to the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=645408
Different bits of code were using slightly different checks to test
whether a window was an attached dialog. Add a new
meta_window_is_attached_dialog(), and use that everywhere.
Also, freeze the is-attached status when the window is first shown,
rather than recomputing it each time the caller asks, since this could
cause problems if a window changes its type after it has already been
attached, etc. However, if an attached window's parent is destroyed,
or an attached window changes its transient-for, then fix things up by
destroying the old MetaWindow and creating a new one (causing
compositor unmap and map events to be fired off, allowing the display
of the window to be fixed up).
Remove some code in display.c that tried to fix existing windows if
the gconf setting changed, but which didn't actually do anything (at
least under gnome-shell). However, if 654643 was fixed then the new
behavior with this patch would be that changing the gconf setting
would affect new dialogs, but not existing ones.
https://bugzilla.gnome.org/show_bug.cgi?id=646761
get_outer_rect now returns the visible region, and a new get_input_rect
method returns the boundaries of the full frame, including the possible
invisible regions. When undecorated, both do the samething.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
There were actually *two* MetaFrameGeometry structs: one in theme-private.h,
one in frame.h. The latter public struct was populated by a mix of (void*)
casting and int pointers, usually pulling directly from the data in the private
struct.
Remove the public struct, replace it with MetaFrameBorders and scrap all
the pointer hacks to populate it, instead relying on both structs being used
in common code.
This commit should be relatively straightforward, and it should not do any
tricky logic at all, just a sophisticated find and replace.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
In preparation for switching to handling the output shape purely by what we
paint, stop applying a shape to the frame of the window. Even when we restore
handling the output shape, this will change the behavior with respect to input;
transparent areas between the frame and the contents will stop clicks rather
than passing them through, but that is arguably at least as expected
considering how that we decorate shaped windows with a frame all around.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
When detaching/attaching a dialog, we were only updating
appears-focused on the parent if the child itself was focused, but in
fact, we need to do it if the child has an attached child which is
focused too.
To simplify the case of detaching a focused subtree from its parent,
we change meta_window_propagate_focus_appearance() to use
@window->display->focus_window as the window to add/remove as the
attached_focus_window, and @window only as the starting point to
propagate from. That way we can propagate focus-removal up to
@window's (soon-to-be-ex-)ancestors without having to remove it from
its descendants as well.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Don't set a window's xtransient_for if it would create a loop. Since
this is the only place we ever set xtransient_for, we can therefore
assume everywhere else that it does not loop.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Since version 3.0, GTK+ has support for style variants. At the moment,
themes may provide a dark variant, which can be requested by
applications via GtkSettings. The requested variant is exported to
X11 via the _GTK_THEME_VARIANT property - support this property, in
order to pick up the correct style variant in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
If a window is not maximizable, then that probably means it looks dumb
at very large sizes. Even if its hints would allow you to manually
resize it to a large size, don't allow automatically tiling it to half
the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=647901
An ARGB window with a frame is likely something like a transparent
terminal. It looks awful (and breaks transparency) to draw a big
opaque black shadow under the window, so clip out the region under
the terminal from the shadow we draw.
Add meta_window_get_frame_bounds() to get a cairo region for the
outer bounds of the frame of a window, and modify the frame handling
code to notice changes to the frame shape and discard a cached
region. meta_frames_apply_shapes() is refactored so we can extract
meta_frames_get_frame_bounds() from it.
https://bugzilla.gnome.org/show_bug.cgi?id=635268
If a window can not be tiled, e.g. due to its minimum size hints,
dragging away from the top after activating the maximize tile preview
does not cancel the maximization request, the only way to do so is by
hitting Escape.
To fix, reset the tiling state in the maximize-tile code path as
well if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=646149
Apparently the "fox" toolkit doesn't set WM_CLIENT_MACHINE; while we
could do gymnastics to attempt to figure this out (talk to the X
server?), better to just default to FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=647662
Since appears-focus only propagates up from modal dialogs, if an
application removed the modal hint from a dialog before destroying it,
then its parent would be left with a stray reference to it in
attached_focus_window, causing it to be permanently appears-focused.
The obvious fix, calling meta_window_propagate_focus_appearance() when
the modal hint is removed, tends to cause noticeable flashing, because
the window will get drawn unfocused and then focused again.
So instead we just change meta_window_propagate_focus_appearance() to
check the window type only when focusing in, not when focusing out.
This would also cause flashing, but in this case we can avoid it by
not notifying the change in appears-focus on the parent window if it
is the expected_focus_window (which it will be by this point). (This
does mean though that if something weird happens and the window
doesn't end up becoming the focus window, it won't get redrawn
unfocused until something else forces it to.)
https://bugzilla.gnome.org/show_bug.cgi?id=647613
We need to redraw a window's shadow any time the value of
meta_window_appears_focused() changes. So make that into a property so
we can get notifications on it.
https://bugzilla.gnome.org/show_bug.cgi?id=636904
This is useful for DnD to another monitor in gnome-shell.
In addition to a normal move it corrects the saved rect for
maximized and fullscreened windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645032
Currently attached modal dialogs are not resizable, but we don't
communicate this to GTK+, so the dialog may end up with resize
grips anyway. As a fix, allow resizing, but account for the dialog
being centered to its parent.
https://bugzilla.gnome.org/show_bug.cgi?id=643597
Commit 96c43866 changed the tiling behavior to prefer edge tiling
over maximization in corner cases (well, quite literally). As a
side effect, it only allows untiling of edge-tiled windows by
dragging the window towards the correct edge.
This patch restores the old behavior for untiling, while keeping
the new behavior for untiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645455
For tiling, we check whether the pointer is near the edges of
the monitor where the pointer is located, so checking that the
pointer is within the bounds of the monitor is unnecessary and
confusing.
If dragging the title bar to the edge of the screen to side-tile,
it's easy to end up above the workarea and end up maximized instead.
Make the entire side of the screen act as edge-tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=644961
In a performance or regression testing environment, we may want to
only manage windows from a particular test program, and ignore all
other windows. The MUTTER_WM_CLASS_FILTER environment variable is a
list of WM_CLASS values that should be managed; other windows will
be unmapped and ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=644252
This adds a preference that when enabled makes all windows not on
the primary monitor be visible on all workspaces (i.e. not part of the
workspace switching handling).
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Sometimes on_all_workspaces is requested by the client/user, and sometimes
its calculated implicitly due to internal state. We split this up so that
we know when the user has explicitly asked for sticky window, when e.g.
setting wmspec properties or storing session info.
on_all_workspaces means this window is visible on all workspaces.
on_all_workspaces_requested, means the user explicitly made the window
sticky somehow (via imported session, _NET_WM_STATE from another wm,
toggled in the window menu, etc). It always implies on_all_workspaces is
TRUE.
Right now the only time we set on_all_workspaces is for override-redirect
windows, but later we can add a "windows on non-primary monitor are not
part of the workspace switching" feature.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
The latter move method will place the window by the origin of the
enclosing window decoration/frame, while the former will place by the
origin of the inner window, itself.
(Also moved meta_window_showing_on_its_workspace comment into
gtk-doc)
https://bugzilla.gnome.org/show_bug.cgi?id=642355
If mutter is going to be a "real" library, then it should install its
includes so that users can do
#include <meta/display.h>
rather than
#include <display.h>
So rename the includedir accordingly, move src/include to src/meta,
and fix up all internal references.
There were a handful of header files in src/include that were not
installed; this appears to have been part of a plan to keep core/,
ui/, and compositor/ from looking at each others' private includes,
but that wasn't really working anyway. So move all non-installed
headers back into core/ or ui/.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
If we are previewing hidden windows, we might be previewing them in a context
like a thumbnail view of a workspace where we care about positioning. So, instead
of waiting until the window is first actually shown to place it, if
live_hidden_previews is set, place the window window when we first compute its
visibility, even if we don't end up showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=641309
The previous tiling state of a grabbed window should be restored
if the drag operation is cancelled (by hitting the Escape key).
This might involve to meta_window_tile(), so export the function
in window-private.h.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
To deal with reentrancy from compositor plugins doing things like
moving windows between workspaces in an effect callback, update
the visible_to_compositor flag before calling into the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
Maximized tiled windows end up with an inconsistent tile mode when
unmaximized by other means than dragging the window free (e.g.
using the unmaximize button or double clicking the title bar), so
reset the tile mode when unmaximizing.
This is not a problem for side-by-side tiling, as there are no
alternatives to dragging the window free.
When a tiled window is maximized (e.g. by clicking the title bar
button), unmaximizing the window restores the tiled state. While
this is reasonable for side-by-side tiling, it is confusing for
"maximize" tiled windows, as unmaximization has no visible effect.
Change unmaximize to only restore the tiled state of side-by-side
tiled windows.
The original patch triggered "maximize" when the window was dragged
to the top, so that the pointer was below or on the monitor edge and
above the work area's top.
If there's no chrome at the top of the monitor, so that monitor edge
and work area top fall together, the pointer cannot be moved above
the work area's top, so tiling was not triggered.
The old behavior of being able to shake loose a maximized window
overlaps with and is for the most part superceded by top edge tiling.
This commit changes the code to only enable shake loose behavior
when edge tiling is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
In addition to the existing side-by-side tiling modes, this commit
adds a new "maximize" tiling mode. It allows the user to maximize
their windows (in other words, tile with the edge panels) by dragging
their window to the top edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
The meta_window_handle_mouse_grab_op_event function ensures
the tile_mode variable is in a consistent state after a drag
op is finished.
The way this is current done is:
if (!window->maximized_vertically &&
window->tile_mode != META_TILE_NONE)
window->tile_mode = META_TILE_NONE;
While valid, it doesn't "read" as well as using the
META_WINDOW_TILED_SIDE_BY_SIDE macro, since the macro is specifically
about side-by-side tiling.
This commit just changes things to use the macro and to not bother
checking the tile mode (since if we just reset it anyway, then it doesn't
matter if the value is right or wrong to begin with).
https://bugzilla.gnome.org/show_bug.cgi?id=630548
Currently, the new tiling feature, supports side-by-side, horizontal
tiling when dragging windows to one of the vertical edges of a monitor.
Other types of tiling (on other monitor edges) are potentially useful,
though.
This commit renames the preference from side_by_side_tiling to
edge_tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
These functions duplicate existing properties; they are added for
convenience and to avoid the GObject property code on some
performance critical painting paths.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
While the Meego developers agreed to switching mutter to GTK+-3.0
unconditionally a while ago, Canonical used a GTK+-2.0 build for their
Unity project. As Canonical now announced a switch to compiz as their
window manager, there is no longer a reason to maintain GTK+-2.0
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=633133
Remove --allow-unprefixed option to the scanner, and fix resulting
problems:
* theme.h and boxes.h are split into a main -header and a private
header that includes stuff that is not generally useful and
hard to introspect. Merge theme-parser.h into theme.h.
* meta_display_get_atom() and meta_window_get_window_type_atom()
are marked as (skip)
* Fix annotation: (element-type Strut) => (element-type Meta.Strut)
https://bugzilla.gnome.org/show_bug.cgi?id=632494
For functions (but not callback types), '(closure)' is used on the
callback parameter, and takes the name of the parameter which is
the closure/user data.
A maximized window can't be resized from the screen edges (preserves
Fitts law goodness for the application), but it's still possible
to start a resize drag with alt-middle-button. Currently we just
don't let the user resize the window, while showing drag feedback;
it's more useful to let the user "break" out from the resize.
This provides a fast way to get a window partially aligned with
the screen edges - maximize, then alt-drag it out from one edge.
Behavior choices in this patch:
- You can drag out a window out of maximization in both directions -
smaller and larger. This can be potentilaly useful in multihead.
- Dragging a window in only one direction unmaximizes the window
fully, rather than leaving it in a horizontally/vertically
maximized state. This is done because the horizontally/vertically
maximzed states don't have clear visual representation and can
be confusing to the user.
- If you drag back to the maximized state after breaking out,
maximization is restored, but you can't maximize a window by
dragging to the full size if it didn't start out that way.
A new internal function meta_window_unmaximize_with_gravity() is
added for implementing this; it's a hybrid of
meta_window_unmaximize() and meta_window_resize_with_gravity().
Port of the metacity patch from Owen Taylor in bug 622517.
https://bugzilla.gnome.org/show_bug.cgi?id=629931
When dragging a window over a screen edge and dropping it there,
maximize it vertically and scale it horizontally to cover the
corresponding half of the current monitor.
Whenever a "hot area" which triggers this behavior is entered, an
indication of window's target size is displayed after a short delay
to avoid distraction when moving a window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=606260
Add a preference /apps/mutter/general/attach_modal_dialogs. When true, instead
of having independent titlebars, modal dialogs appear attached to the titlebar
of the parent window and are moved together with the parent window.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
Cleanly build with --warn-fatal. Implementation:
* Liberally apply (skip) where the API is clearly C only, e.g. uses
XLib. The theming code and MutterPlugin are skipped too.
* Add missing (transfer) and (element-type) annotations
For a few functions that had a comment, I turned it into gtk-doc, but
I didn't (with a few exceptions) try to write new documentation in
this pass.
When we do pseudo-management on an override-redirect window, we have to be
careful to augment the existing event mask, not replace it, or
delivery of pointer events will be disrupted.
When we unmanage a window, we shouldn't try to unselect events at all,
since that will interfere with event selection done by GDK.
http://bugzilla.gnome.org/show_bug.cgi?id=597763
A mismerge of the Metacity commit "4943d79 Prevent window self-maximisation"
caused the window's user set size and position to be saved *before*
actually resizing the window to the unmaximized position rather than after.
This meant that after unmaximization the window was in an inconsistent
state and anything that caused a resize to be queued (like a change in
window properties by the application) would cause it to pop back to
the maximized size and position.
https://bugzilla.gnome.org/show_bug.cgi?id=621413
It's useful for plugins to be able to easily detect whether
or not a window is from a remote host. Also, make use of this
in the window delete codepath, instead of looking up the hostname
each time.
https://bugzilla.gnome.org/show_bug.cgi?id=620585
A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
Whether Metacity honors a raise request from an application should
not be affected by the raise_on_click setting; remove a check that
seems to have been added in error.
https://bugzilla.gnome.org/show_bug.cgi?id=445447
We currently allow XRaiseWindow when the same application (defined
by the window group) is focused, but the kind of old applications
that XRaiseWindow are frequently not setting the window group.
Expand the check to allow the same X client (defined by the looking
at client ID) to raise windows above the focus window.
https://bugzilla.gnome.org/show_bug.cgi?id=567528
Having a MetaDisplay::window-demands-attention signal allows to deal with
windows demanding attention in a cetralized fashion.
The signal is emitted when a window is created with initial demands-attention
state and/or when the state changes later on.
Based on original patch by Jon Nettleton.
https://bugzilla.gnome.org/show_bug.cgi?id=597052
With the change from bug 582639, we no longer call the reload
functions for properties that are not initially set, so the
initialization of fields in window.c has to match what
window-props.c would set for a missing property.
There was only one discrepancy, window->input, which needs
to be set to TRUE by default (or a window missing a WM_HINTS
property won't get focus); we also add explicit initializers
for a couple of fields that were getting 0-initialized
to the correct default value of FALSE for consistency with
the explicit intialization of the rest of the fields.
Bug reported by Dominique Leuenberger
https://bugzilla.gnome.org/show_bug.cgi?id=601228
For some consumers it's significantly more convenient to be able
to directly connect to a signal on the Window to know when
Mutter is done with it, rather than having to connect to each
Workspace object (and handle workspace additions, etc.).
Similarly, add window-created which acts globally.
https://bugzilla.gnome.org/show_bug.cgi?id=598289
When we focus a window on a different desktop, and the calc_showing
idle that hides/shows the windows gets run before we get focus events
back from X, we think that we are hiding the window with the focus
so we focus a "random" window to avoid leaving the user with no focus.
Work around this temporarily by checking display->expected_focus_window;
this isn't a perfect fix because there are cases where
display->expected_focus_window corresponds to a window we tried to
focus in the past but failed, but it makes things work fairly well.
https://bugzilla.gnome.org/show_bug.cgi?id=597352
There was a problem where if, for example, a restack was triggered
out of a clutter event handler, then after Clutter processed the
events, it would proceed immmediately on to repaint the stage without
ever returning control to the GLib main loop. So even though we
had an idle handler installed with a higher priority than the
Clutter stage repainting the clutter stage repainting would happen
first and we'd get a wrong frame.
Fix this by introducing the idea of "later functions", which abstract
the idea of "doing something later" away from g_idle_add() and use
a combination of GLib idle functions and Clutter "repaint functions"
to get our callbacks triggered at the right time, even when they
are installed from a clutter event handler.
https://bugzilla.gnome.org/show_bug.cgi?id=596334
This also resolve a FIXME where MUTTER_PRIORITY_BEFORE_REDRAW
could starve stage repainting.
mutter-window.c originally grew an #include "window-private.h" for
window->override_redirect, but that was just fixed. However since
then it also ended up relying on a few other minor private bits.
To fix that, add meta_window_is_mapped, promote meta_window_toplevel_is_mapped
to public, and use the public MetaDisplay accessor.
When window initially maps, use the more recent of NET_WM_USER_TIME and
startup notification timestamps to compare against last known user action to
decide whether to focus the window or not. Once we show the window, clear
the initial_timestamp_set flag, so the startup notification timestamp is not
taken into account again.
Based on patch for metacity by Alexander Larsson
http://bugzilla.gnome.org/show_bug.cgi?id=573922
Many override-redirect windows (including the Metacity UI windows!)
will have NET_WM_WINDOW_TYPE_NORMAL set on them because of shared
code paths with normal windows in toolkits.
Some current Compositor plugins (default plugin and gnome-shell)
check type == NORMAL to determine if to run effects. While fixing
such plugins to also check if the window is override-redirect is
posisble, it seems cleanest to simply not allow any of the decorated
window types to be set on an override-redirect window and to force
these types to META_WINDOW_OVERRIDE_OTHER. This will prevent other
similar problems from showing up in the future.
http://bugzilla.gnome.org/show_bug.cgi?id=590971
As a sideffect of commit a576f7a1ea, override
redirect windows of type _NET_WM_WINDOW_TYPE_NORMAL do not have their
features recalculated during MetaWindow construction (same as regular
windows of type _NET_WM_WINDOW_TYPE_NORMAL), so we need to set the initial
values accordingly.
Although the spec designates some window types as typically used for
override redirect windows, it does not prohibit the use of these with
managed windows, so we should not abort if we encounter one of these.
http://bugzilla.gnome.org/show_bug.cgi?id=583870
Previously, changes to the visibility of a window could be indicated
by meta_compositor_map_window(), meta_compositor_unminimize_window(),
meta_compositor_set_window_hidden(), etc, with the exact behavior
depending on the 'live_hidden_windows' preference.
Simplify this so that visibility is controlled by:
meta_compositor_show_window()
meta_compositor_hide_window()
With an 'effect' parameter provided to indicate the appropriate
effect (CREATE/UNMINIMIZE/MINIMIZE/DESTROY/NONE.)
The map state of the window is signalled separately by:
meta_compositor_map_window()
meta_compositor_unmap_window()
And is used only to control resource handling.
Other changes:
* The desired effect on show/hide is explicitly stored in
MetaWindow, avoiding the need for the was_minimized flag.
At idle, once we calculate the window state, we pass the
effect to the compositor if it matches the new window
state, and then clear the effect to start over for future
map state changes.
* meta_compositor_switch_workspace() is called before any windows
are hidden or shown, allowing the compositor to avoid hiding
or showing an effect for windows involved in the switch.
http://bugzilla.gnome.org/show_bug.cgi?id=582341
* Handling of post-effect cleanups for MutterWindow are
simplified - instead of trying to do different things based
on the individual needs of different effects, we just wait until
all effects complete and sync the window state to what it
should be.
* On unmap, once we destroy the pixmap, we tell ClutterX11Pixmap
that we've done so, so it can clean up and unbind. (The
unbinding doesn't seem to be working properly because of
ClutterGLXPixmap or video driver issues.)
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Add a paint function that checks all windows for repair and
shape updates; this:
- simplifies the logic for when a window needs to be repaired
- avoids duplicate work when we get multiple damage effects
- avoids the need to look ahead in the event queue
Instead of relying on repair to implicitly resize the
MutterWindow actor, set the size explicitly when the core
code updates the geometry. (This is needed because we haven't
repaired yet when we start an animation, and the animation
may depend on the size to, e.g., rescale from the center.)
Because the core geometry update happens before we start
maximize/unmaximize effects we need to work around this by
passing both the old and new geometry to the compositor.
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Remove a number of functions that were either entirely unimplemented
or had empty implementations for the Clutter-compositor.
meta_compositor_begin_move()
meta_compositor_update_move()
meta_compositor_end_move()
meta_compositor_set_active_window()
meta_compositor_free_window()
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Now that we only have one compositor, there's no reason to access the
compositor functions through a vtable. Remove the MetaCompositor virtualization
and make the clutter code implement the meta_compositor_* functions
directly.
Move the checks for the compositor being NULL from the vtable wrappers
to the calling code (most of them were already there, so just a few
needed to be added)
Note: the compositor is actually hard-coded on at the moment and the plan
is to remove the non-composited code entirely, so the checks are
added only to keep things neat: they have no practical effect.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Mutter is a Clutter-based compositing manager. So, remove the code for
the XRender-based compositor, and make it mandatory to have XComposite,
XRender and Clutter.
Run-time support for non-composited operation is left for now.
* src/compositor/mutter/: Move files from this subdirectory into
the main compositor/ directory.
* compositor/compositor-xrender.ccompositor/compositor-xrender.h:
Remove
* include/compositor-clutter.h: Remove this stray file, it had been
replaced with compositor-mutter.h some time back.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Don't add override-redirect windows to MetaStack; we shouldn't
be restacking them.
Since we *aren't* stacking the override-redirect windows, we need to
be careful that to ignore them when looking for the top managed
window.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
In order to properly track the stacking order for override-redirect
windows, move meta_compositor_sync_stack() call into MetaStackTracker.
In the new location, we sync the stack as a before-redraw idle function,
rather then using the freeze-thaw facilities of MetaStack. This is
simpler, and also properly compresses multiple stack changes on
notifications received from the X server.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
Override-redirect windows should not be moved or resized by the
window manager.
- Mark override-redirect windows as already placed to avoid
placing them when first shown.
- Don't move-resize newly created override-redirect MetaWindow
- Don't queue a resize on override-redirect windows when reading
their WM_TRANSIENT_FOR hint.
- Add g_return_if_fail (!window->override_redirect) to catch
unexpected code paths that might result in override-redirect
windows being moved or resized.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Normally a window that is "on all workspaces", is also on a particular
workspace (to deal with being unstuck.) This is pointless for
override-redirect windows.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Don't include override-redirect windows in the list return by
meta_display_list_windows(), since we almost never want to handle
them when considering "all window" for the display. Add a separate
meta_display_list_all_windows() that includes override-redirect
windows.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Skipping handling of properties for override redirect windows has
two advantages: first it reduces the amount of work needed to get
an override-redirect window (menu, tooltip, drag icon) onto the
screen. But more importantly, it reduces the number of code-paths
for an override-redirect to get into some code portion where it
isn't expected.
* Integrate the list of properties we load initially with the
list of property hooks; this avoids having two separate lists
that we have to keep in sync.
* Add a flag to MetaWindowPropHooks to indicate whether the
property should be handled for override-redirect windows;
currently we load a) properties that identify the window -
useful for debugging purposes b) WM_TRANSIENT_FOR (could be
used to associate menus with toplevels.)
* For properties that aren't always loaded through window-props.c,
add !window->override checks to places that trigger loading,
and add g_return_if_fail(!window->override) to the load
functions as a double-check.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Add g_return_if_fail() to check that window-management functions like
meta_window_maximize() aren't called on override-redirect windows.
This reveals that were were "unminimizing" override-redirect windows
when adding them; avoid doing that.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
On subsequent changes, if there is a NET_WM_USER_TIME_WINDOW, then
read the property from that rather than from the main window.
(Fix an accidental regression: the right Window was being computed
but no longer passed in.)
http://bugzilla.gnome.org/show_bug.cgi?id=585979
When we add a window and it gets hidden as the first thing, we need
to show not just the frame window, but also the window itself.
Otherwise when the window subsequently becomes visible, it will
just be an empty frame.
Add helper functions to reduce current code duplication and avoid
adding more.
http://bugzilla.gnome.org/show_bug.cgi?id=586309
Code:
All references in the code not related to themes, keybindings, or
GConf were changed from 'metacity' to 'mutter'. This includes, among other
things, strings, comments, the atoms used in the message protocol, and
the envvars used for debugging. The GConf schema file was reduced to
the 3 settings new to mutter.
The overall version was brought up to 2.27 to match current gnome.
Structure:
All files named '*metacity*' were renamed '*mutter*' with appropriate
changes in the automake system. Files removed are
doc/creating_themes, src/themes, doc/metacity-theme.dtd,
metacity.doap. These files will eventually end up in an external
gnome-wm-data module.
Installation location:
On the filesystem the mutter-plugindir was change from
$(libdir)/metacity/plugins/clutter to just $(libdir)/mutter/plugins.
The mutter-plugins.pc.in reflects these changes.
Note:
mutter.desktop.in and mutter-wm.desktop both continue to have
X-GNOME-WMSettingsModule=metacity set. This allows
gnome-control-center to continue using libmetacity.so for
configuration. This is fine since most the general keybindings and wm
settings are being read from /apps/metacity/* in gconf.
When the window being hidden/mimimized has focus, is modal, but is not on the
currently active workspace (e.g., during workspace switch before the new
focus window is activated), we must prevent focus being passed to the modal
window ancestor (otherwise the ancestor ends up being forcefully moved onto
the active workspace).
Make meta_window_get_icon_geometry() public, so that it can be used
to from plugins to animate windows minimizing to the correct
position.
Based on a patch from Cosimo Cecchi <cosimoc@gnome.org>
http://bugzilla.gnome.org/show_bug.cgi?id=571109
The MetaDirection enumeration had META_SIDE_* values in it that
were used in some places where an enum with only four directions
was needed. Split this off into a separate enum called MetaSide
and use that enum name where appropriate.
Expose restacking and a window's stack layer to allow a compositor
to insert elements into the window stack in the right location.
(See Bug 571827 – hide panel when screensaver is active)
src/core/stack.h src/include/common.h: Move MetaStackLayer to
a public header.
src/core/screen.c src/core/screen-private.h src/core/stack.c:
Add a ::restacked signal emitted after we finish restracking.
src/core/window.h src/include/window.h: Add meta_window_get_layer()
In particular, make it so that we call meta_compositor_add_window() on
a new window before calling meta_compositor_sync_stack() to position
it. The list returned by mutter_plugin_get_windows() is only updated
by sync_stack(), but sync_stack() only pays attention to windows that
add_window() has already been called on. So without this change, a
newly-mapped window will not be returned by
mutter_plugin_get_windows() until after the *next* restacking.
http://bugzilla.openedhand.com/show_bug.cgi?id=1512
window property handlers. The ones which remain don't
actually look up the new value in the ordinary way, and
so are a little trickier to merge. Added an "initial"
flag to be on the safe side that the behaviour is the
same as before (so we don't do things when a window's
first mapped that we only used to do when a property
changed). Partial fix for bug #549886.
* src/core/window-props.c:
* src/core/window-props.h:
* src/core/window.c:
svn path=/trunk/; revision=4089
Requiring the compositor private object to be a GObject allows the
return value of meta_window_get_compositor_private() to be used
via gobject-introspection, since the type and memory management
can be determined.
This allows a reverse mapping from MetaWindow to MutterWindow.
- Change meta_window_get/set_compositor_private to use GObject
rather than void *
- Adapt code in compositor-mutter.c to match.
* src/core/window.c: windows which attempt to present themselves
but are offscreen end up demanding attention, unless they
are transient, when they move to the current workspace
as before. Closes#482354.
svn path=/trunk/; revision=4060
property and client message. This allows client applications to request
that a fullscreen window cover more than one monitor.
* src/include/boxes.h:
* src/core/boxes.c: Add meta_rectangle_union
* src/core/window-private.h:
* src/core/window.c:
(meta_window_new_with_attrs, meta_window_free, set_net_wm_state,
meta_window_update_fullscreen_monitors, meta_window_client_message): Add
MetaWindow property to store fullscreen monitors field, update
_NET_WM_FULLSCREEN_MONITORS property on windows, and handle client
message.
* src/core/atomnames.h: Add _NET_WM_FULLSCREEN_MONITORS atom.
* src/core/constraints.c (setup_constraint_info): If
_NET_WM_FULLSCREEN_MONITORS is interesting, use the data stored in
MetaWindow::fullscreen_monitors to determine the fullscreen area instead
of the basic xinerama_info area.
svn path=/trunk/; revision=4021
The metacity core is now directly aware of override redirect windows.
- They get MetaWindows like normal windows, so mutter no longer need to special
case them. The net wm types applicable to override redirects are also
recognised.
- The original positioning/stacking semantics of metacity with respect to OR
windows are maintained, but now it's easier to synchronize the stacking
between the core and mutter.
- mutter no longer needs to manualy track UnmapNotify, MapNotify,
ReparentNotify, CreateNotify and DestroyNotify events; instead map, unmap,
add and remove events can now be consistently delivered via the
MetaCompositor callbacks.
Make MetaWindow into a GObject so that it is accessible to
gobject-introspection (also allows for signals to be added.)
Renames:
meta_window_free() => meta_window_unmanage()
meta_window_get_type() => meta_window_get_window_type()
meta_window_get_type_atom() => meta_window_get_window_type_atom()
src/core does some things depending on window->mapped, but since we now
leave the window mapped for hidden windows we might get some wrong
descisions.
Also instead of calling meta_window_show when in meta_window_hide for
the case that the window isn't currently mapped, we now simply
XMapWindow.
It's more awkward and error prone, considering plugin ininteractions, to simply
show/hide the actors of hidden windows, and it seems to be more reliable to
reparent them to a hidden group instead.
We can't easily use a metacity layer to hide windows as that means we
loose our original stacking position. (Metacity's stack positions are
only valid within a single layer) We now have a "guard window" per
screen that is a fullscreen override redirect that is lowered to the
bottom of the stack. Hidden windows now remain in their original layer
so the stacking position remains valid, but all hidden windows get
XRestacked under the guard window.
A new compositor hook is also added to inform it when a window becomes
hidden/unhidded, this lets us map/unmap the corresponding actor.
missing files in preview commit (TODO: rebase -i and squash this later)
ClutterActors for hidden windows (such windows on different than active
workspaces and windows that are minimized) are available, and reflect the
actual state of the window. This is intended for use in task-switchers etc.
This feature is disabled by default (due to increased demand on resources),
and can be enabled through the metacity/general/live_hidden_windows gconf key.
A trivial sample window switcher is included in the scratch plugin (activated
by clicking on the slide out panel).
2008-10-23 Thomas Thurman <tthurman@gnome.org>
Support _NET_WM_STATE_STICKY (i.e. allow third-party apps to decide
whether a window is on all workspaces). Bug found by Ka-Hing
Cheung. Closes#557536.
* src/core/window.c (set_net_wm_state): report it
* src/core/window.c (meta_window_client_message): set sticky
if we receive it
* src/core/window-props.c: set sticky if we find it
* src/core/atomnames.h: add _NET_WM_STATE_STICKY
svn path=/trunk/; revision=3991
2008-10-22 Thomas Thurman <tthurman@gnome.org>
* src/core/window.c (meta_window_set_demands_attention): minimised
windows are necessarily obscured.
svn path=/trunk/; revision=3971
2008-10-06 William Lachance <wrlach@gmail.com>
Pass modified mouse button events down to panel windows
instead of dealing with them ourselves. Closes#554428.
* src/core/display.c (prefs_changed_callback): don't grab mouse
buttons on panels
* src/core/window.c (meta_window_new_with_attrs): ditto
svn path=/trunk/; revision=3942
2008-08-30 Thomas Thurman <tthurman@gnome.org>
* src/core/window.c (process_property_notify): moving all
messages about properties to the top, as a start at #549886
svn path=/trunk/; revision=3837
2008-08-16 Ted Percival <ted@midg3t.net>
Ensure the user_rect is set sanely for windows that start maximized.
Prevents maximized windows from warping across the screen.
Fixes bug #504692.
* src/core/window.c (save_user_placement): renamed version of
meta_window_save_user_rect().
* src/core/window.c (force_save_user_placement): similar, but will
always save user_rect even if the window is maximised or fullscreen.
* src/core/window.c (meta_window_move_resize_internal): unplaced
windows have force_save_user_placement() called instead of
save_user_placement().
svn path=/trunk/; revision=3816
2008-07-12 Thomas Thurman <tthurman@gnome.org>
* src/core/group.c (meta_window_get_group): This function can now
officially return NULL.
* src/core/window.c (meta_window_same_application): Two windows can't
belong to the same application unless they both belong to some
application. (Both belonging to no application is not the same.)
Closes#453022.
svn path=/trunk/; revision=3785
2008-06-28 Thomas Thurman <tthurman@gnome.org>
Some refactoring, simplifying, and commenting of the non-composited
effects code. effects.c could still do with some polish, which will
come along later.
* src/core/effects.h (meta_push_effect_handler): removed since it's
never used and does nothing very useful.
* src/core/effects.h (meta_pop_effect_handler): removed since its
only effect is to crash the program.
* src/core/effects.h (META_MINIMIZE_ANIMATION_LENGTH,
META_SHADE_ANIMATION_LENGTH): move to effects.c because they're used
nowhere else.
* src/core/effects.c: there were three versions of the box-zoom effect.
Remove the one which was never used, and make only the ones which
are used with certain configure settings be compiled.
* src/core/effects.h (meta_effect_end): move to effects.c, make static,
and rename to effect_free.
* src/core/effects.h (meta_effects_draw_box_animation): move to
effects.c, make static, and rename to draw_box_animation.
* src/core/effects.h (MetaEffectType): remove the values which weren't
used.
* src/core/window.c (meta_window_shade): remove commented-out code to
call effect for shading.
* src/core/effects.h (MetaEffectFinish): remove useless MetaEffect
parameter.
* src/core/window.c (finish_minimize): remove MetaEffect parameter.
svn path=/trunk/; revision=3771
2008-05-19 Iain Holmes <iain@gnome.org>
* src/include/frame.h
* src/include/display.h
* src/include/xprops.h
* src/include/compositor.h
* src/include/types.h
* src/include/window.h
* src/include/errors.h
* src/include/screen.h: New basic public API for compositor.
* src/compositor/*: Separate the compositor out into its own
separate
directory and set it up for backends. Initial XRender backend.
* src/core/compositor.[ch]: Remove
* src/core/frame.h
* src/core/screen.h
* src/core/display.h
* src/core/window.h: Rename to -private.h so as not to clash
with the
new files in include
* src/core/delete.c
* src/core/workspace.h
* src/core/stack.[ch]
* src/core/keybindings.[ch]
* src/core/errors.c
* src/core/effects.[ch]
* src/core/core.c
* src/core/group.h
* src/core/edge-resistance.[ch]
* src/core/window-props.[ch]
* src/core/constraints.h
* src/core/bell.[ch]
* src/core/iconcache.h
* src/core/session.[ch]
* src/core/main.c
* src/core/place.h
* src/core/xprops.c
* src/ui/tabpopup.c: Use the new -private headers
* src/core/display.c
* src/core/frame.c
* src/core/window.c
* src/core/screen.c: Add the API functions required by the
compositor
* src/Makefile.am: Relocate the new files
svn path=/trunk/; revision=3715
2008-05-02 Thomas Thurman <tthurman@gnome.org>
All information should live in exactly one place. This means
that the list of atoms should not be replicated anywhere.
Therefore, we include it via x-macros. Closes#530843.
* src/core/atomnames.h: added list of atom names
* src/Makefile.am: added reference to new file
* src/core/display.h
* src/core/display.c (twice)
* src/core/screen.c: #included atomnames.h instead of having
an enormous list of atoms
* src/core/group-props.c
* src/core/window.c
* src/core/compositor.c
* src/core/window-props.c
* src/core/delete.c
* src/core/workspace.c
* src/core/stack.c
* src/core/keybindings.c
* src/core/iconcache.c
* src/core/group.c
* src/core/xprops.c: changed to new, simpler identifiers
for atoms
svn path=/trunk/; revision=3702
2008-04-29 Chris Wang <chris.wang@sun.com>
* src/core/window.c (meta_window_new): XGetWindowAttributes
can return an error value, and if it does its other results
are invalid! (#530485)
svn path=/trunk/; revision=3698
2008-03-19 Iain Holmes <iain@gnome.org>
* src/core/compositor.c (meta_compositor_set_active_window): Add
a
screen argument.
(process_property_notify): Damage the whole screen when the
background
changes. Fixes 522599
(add_repair): Use the idle instead of the timeout. Fixes 522166
(unmap_win): If the window is also focus window NULLify it.
* src/core/window.c (meta_window_notify_focus): Notify when a
window
has lost focus, pass in screen as well.
svn path=/trunk/; revision=3654
2008-03-18 Iain Holmes <iain@gnome.org>
* src/core/compositor.c (window_has_shadow): Allow shaped
windows
_with frames_ to have shadows.
(meta_compositor_set_active_window): Watch for the focus of
windows
and change the size of the drop shadows.
(generate_shadows): Create differently sized shadows.
(meta_compositor_get_window_pixmap): Get the xwindow correctly.
* src/core/window.c (meta_window_notify_focus): Set the active
window
in the compositor.
svn path=/trunk/; revision=3653
2008-03-18 Marco Pesenti Gritti <mpgritti@gmail.com>
* src/core/window.c (window_would_be_covered): newly created windows
can't be considered to be above themselves; fixes bug #519188.
svn path=/trunk/; revision=3650
2008-02-18 Thomas Thurman <tthurman@gnome.org>
* src/core/window.c (warp_grab_pointer): When
resizing a window with the keyboard, stay one
pixels from the edges so that the cursor remains
resting on a window edge even if we escape,
whatever side it was on. Closes#436257.
svn path=/trunk/; revision=3578
2008-02-01 Alex R.M. Turner <armtuk@gmail.com>
* src/core/display.c (meta_get_tab_entry_list): Have the list also pull
windows that are in other workspaces that have the
wm_state_needs_attention flag set
* src/core/window.c (meta_window_set_demands_attention): Make windows that
are on other workspaces that demand attention that aren't obscured
count as being obscured
Bug #333548.
svn path=/trunk/; revision=3533
2007-12-19 Havoc Pennington <hp@redhat.com>
* src/ui, src/core, src/include: sort source files into these
directories according to which part of the WM they are supposed to
be in. In an eventual plan, we should also create
src/compositor/render, src/compositor/fallback and move some of
the compositor stuff into that.
* autogen.sh: require a newer automake, so we don't have to use
a recursive build
* src/ui/tabpopup.c: put in a hack to make the build temporarily
work, want to commit the large rearrangement before fixing this
not to include workspace.h or frame.h
* src/core/iconcache.c (meta_read_icons): temporarily break this
to get the build to work, want to commit the large rearrangement
before fixing this file not to include theme.h
svn path=/trunk/; revision=3491
