We need to provide an escape hatch to ClutterCanvas so that it's
possible to override the window-scaling-factor ClutterSetting. This is
going to be useful in the future in case the user has better knowledge
of the window scaling factor that is going to be used with a specific
set of ClutterCanvas contents (e.g. on different outputs or stages).
https://bugzilla.gnome.org/show_bug.cgi?id=705915
The current conformance test suite is suboptimal in many ways.
All tests are built into the same binary, which makes adding new tests,
builting tests, and running groups of tests much more awkward than it
needs to be. The first issue, especially, raises the bar of contribution
in a significant way, while the other two take their toll on the
maintainer. All of these changes were introduced back when we had both
Clutter and Cogl tests in tree, and because we were building the test
suite for every single change; since then, Cogl moved out of tree with
all its tests, and we build the conformance test suite only when running
the `check` make target.
This admittedly large-ish commit changes the way the conformance test
suite works, taking advantage of the changes in the GTest API and test
harness.
First of all, all tests are now built separately, using their own test
suite as defined by each separate file. All tests run under the TAP
harness provided by GTest and Automake, to gather a proper report using
the Test Anything Protocol without using the `gtester` harness and the
`gtester-report` script. We also use the Makefile rules provided by GLib
to vastly simplify the build environment for the conformance test suite.
On top of the changes for the build and harness, we also provide new API
for creating and running test suites for Clutter. The API is public,
because the test suite has to use it, but it's minimal and mostly
provides convenience wrappers around GTest that make writing test units
for Clutter easier.
This commit disables all tests in the conformance test suite, as well as
moving the data files outside of the tests/data directory; the next few
commits will re-establish the conformance test suite separately so we
can check that everything works in a reliable way.
When the threshold-trigger-edge property was introduced in
GestureAction, it was late in the cycle and I elected to keep it
private, given the fact that nobody was subclassing GestureAction
outside of Clutter itself.
These days, people are experimenting more with the GestureAction API, so
they will need access to the various knobs that control the class
default behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=710227
In situations when the default backend would fail (for example
when compiled with X11 support but run without DISPLAY), or
when the application is using backend specific code, it makes
sense to let the application choose the backend explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=707869
When talking to other applications or serializing the modifier
state (and in particular when implementing a wayland compositor),
the effective modifier state alone is not sufficient, one needs
to know the base, latched and locked modifiers.
Previously one could do with backend specific functionality
such as clutter_device_manager_evdev_get_xkb_state(), but the
problem is that the internal data structures are updated as
soon as the events are fetched from the upstream source, but
the events are reported to the application some time later,
and thus the two can get out of sync.
This way, on the other hand, the information is cached in the
event, and provided to the application with the value that
was current when the event was generated.
https://bugzilla.gnome.org/show_bug.cgi?id=706494
This adds support for optionally a providing a foreign Wayland surface
to a ClutterStage before it is first show. Setting a foreign surface
prevents Cogl from allocating a surface and shell surface for the stage
automatically.
v2: add CLUTTER_AVAILABLE_IN_1_16 annotation and API reference docs
(review from Emmanuele Bassi)
v3: set a boolean to indicate that this stage is using a foreign surface
(Rob Bradford)
https://bugzilla.gnome.org/show_bug.cgi?id=699578
This allows the integration of Clutter with another library, like GTK+,
that is dispatching the events itself. This is implemented by calling
into the cogl_wayland_renderer_set_event_dispatch_enabled() and since
that function must be called on the newly created renderer the newly
added clutter_wayland_disable_event_retrieval must be called before
clutter_init()
https://bugzilla.gnome.org/show_bug.cgi?id=704279
The ClutterActor::paint signal is deprecated, and connecting to it even
to get notifications will disable clipped redraws because of violations
of the paint volume.
The only actual valid use case for notifications of a successful frame
is on the ClutterStage, so we should add new (experimental) API for it,
so that users can actually subscribe to it — at least if you're writing
a compositor.
Shoving a signal in a performance critical path is not an option, and
I'm not sure I want to commit to an API like this yet. I reserve the
right to revisit this decision in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=698783
Since we are trying to eliminate the ClutterGeometry type, we should
replace the only entry point still using it: the ::cursor-event signal
of ClutterText.
Instead of passing the cursor geometry, we should add an accessor
function.
The combination of signal and getter for the cursor geometry means that
we can deprecate ClutterText::cursor-event, and mark it for removal in
Clutter 2.0.
https://bugzilla.gnome.org/show_bug.cgi?id=682789
The target size is not always enough, there are cases where the offset
used to paint the target must also be available for developers
implementing an OffscreenEffect.
The get_target_rect() method returns the rectangle used to paint the
target, with the offsets in the ClutterRect:origin and the texture size
in the ClutterRect:size fields, respectively.
The get_target_size() method should be deprecated, given that its
replacement is generally more useful.
https://bugzilla.gnome.org/show_bug.cgi?id=670004
Being able to set a marker at a normalized point on a timeline, instead
of using a specific time, is a nice fit with the current Timeline class
API.
https://bugzilla.gnome.org/show_bug.cgi?id=694319
Export the last event received for each touch point in its entirety,
instead of duplicating ClutterEvent accessors one at a time.
examples/pan-action.c has been updated to show the type of the event
that's causing the panning.
https://bugzilla.gnome.org/show_bug.cgi?id=685737
TapAction is a GestureAction-subclass that handles clicks and
tap gestures. It is meant to provide a replacement for ClickAction
using GestureAction:
• it handles events trasparently without capturing them, so that it
can coexists with other GestureActions;
• the ::tap signal is not emitted if the drag threshold is exceeded;
• building upon GestureAction the amount of code is greatly reduced.
TapAction provides:
• tap signal, notifying users when a tap has been performed.
The image-content example program has been updated replacing its
ClickAction usage with TapAction.
https://bugzilla.gnome.org/show_bug.cgi?id=683948
The ClutterEventSequence structure is a fully opaque type; on X11, it is
just an unsigned integer that gets converted into a pointer, but in the
future it may become a fully fledged data structure.
Obviously, we cannot tell people to just dereference the pointer into an
integer in order to use it, and still retain the ability to change the
type; for this reason, we need a proper accessor function to convert the
EventSequence into a touch detail, to be used with the XInput API.
PanAction is a GestureAction-subclass that implements the panning
concept for scrollable actors, with the ability to emit interpolated
signals to emulate the kinetic inertia of the panning. PanAction provides:
• pan signal, notifying users of the panning gesture status;
• pan-stopped signal, emitted at the end of the interpolated phase
of the panning gesture, if enabled;
• pan-axis property, to allow constraining the dragging to a specific
axis;
• interpolated property, to enable or disable the inertial behaviour;
• deceleration property, to customize the rate at which the momentum
of the panning will be slowed down;
• acceleration-factor property, applied to the inertial momentum when
starting the interpolated sequence.
An interactive test is also provided.
https://bugzilla.gnome.org/show_bug.cgi?id=681648
Add some accessors to simplify common tasks for GestureAction users:
• clutter_gesture_action_get_motion_delta() to get the delta
on the X and Y axis in stage coordinates since the last motion
event, and the scalar distance travelled;
• clutter_gesture_action_get_velocity() to get an estimate of the
speed of the last motion event along the X and Y axis and as a
scalar value in pixels per millisecond.
https://bugzilla.gnome.org/show_bug.cgi?id=681648
Allow setting a ClutterRect on the drag action and force the
dragged actor's position to be always within that rectangle (relative
to the actor's parent).
https://bugzilla.gnome.org/show_bug.cgi?id=681168
The :transform property controls the modelview matrix of an actor; it
can be used to set a custom modelview matrix on the actor, as opposed
to the decomposed transformations (rotation, scaling, translation)
provided by the ClutterActor class.
Another progress function from the CSS3 Transitions specification, using
a parametrices cubic bezier curve between (0, 0) and (1, 1) with two
control points.
(sadly, no ASCII art can approximate a cubic bezier, so no graph)
The cubic-bezier() progress function comes with a bunch of preset easing
modes: ease, ease-in, ease-out, and ease-in-out, that we can map to
enumeration values.
The CSS3 Transitions specification from the W3C defines the possibility
of using a parametrized step() timing function, with the following
prototype:
steps(n_steps, [ start | end ])
where @n_steps represents the number of steps used to divide an interval
between 0 and 1; the 'start' and 'end' tokens describe whether the value
change should happen at the start of the transition, or at the end.
For instance, the "steps(3, start)" timing function has the following
profile:
1 | x
| |
| x---|
| ' |
| x---' |
| ' |
0 |---' |
Whereas the "steps(3, end)" timing function has the following profile:
1 | x---|
| ' |
| x---' |
| ' |
x---' |
| |
0 | |
Since ClutterTimeline uses an enumeration for controlling the progress
mode, we need additional API to define the parameters of the steps()
progress; for this reason, we need a CLUTTER_STEPS enumeration value,
and a method for setting the number of steps and the value transition
policy.
The CSS3 Transitions spec helpfully also defines a step-start and a
step-end shorthands, which expand to step(1, start) and step(1, end)
respectively; we can provide a CLUTTER_STEP_START and CLUTTER_STEP_END
enumeration values for those.
This patch brings 'enter-event' and 'leave-event' generation for touch
based devices. This leads to adding a new API to retrieve coordinates
of a touch point.
https://bugzilla.gnome.org/show_bug.cgi?id=679797
This reverts commit 7f6b17bc50.
ClutterLayoutManager implementations should just defer the easing state
set up to the child, and not try to impose a global one.
We need an alternative to the translation performed by the anchor point,
one that possibly applies to all three axes and is relative to the
pivot-point.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
For some transformations we need to be able to set the Z component of
the pivot point.
Unlike :pivot-point, the Z coordinate is not normalized because actors
are 2D surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
Given that the rotation transformations are now affected by the pivot
point, the Actor class should provide an accessors pair only for the
angle of rotation on a given axis.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The pivot point is a point in normalized coordinates space around which
all transformations revolve.
It supercedes the anchor point and the per-transformation center points
as well as the gravity settings, and tries to sort out the mess that
is the modelview matrix set up in ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The ClutterActor:depth property has always been a bit of a misnomer:
actors are 2D flat surfaces, so they cannot have "depth"; the property
defines the position on the Z axis.
Another side effect of the :depth property is that it decides the
default paint and allocation order on insertion, and that setting it
will call the ClutterContainer.sort_depth_order() method. This has
proven to be a fairly bad design decision that we strung along from the
0.x days, as it gives a false impression of being able to change the
paint and allocation order simply by changing the position on the Z
axis — something that, in reality, requires depth testing to be enabled
during the paint sequence of an actor's parent.
For 2.0 we need a clean break from the side effects, and a better
defined interface.
ClutterActor:z-position is essentially what ClutterActor:depth is, but
doesn't call into ClutterContainer, and has a more apt name.
https://bugzilla.gnome.org/show_bug.cgi?id=679465
It can be useful to check whether a ClutterActorIter is currently valid,
i.e. if the iterator has been initialized *and* if the actor to which it
refers to hasn't been updated.
We can also use the is_valid() method in the conformance test suite to
check that initialization has been successful, and that changing the
children list through the ClutterActorIter API leaves the iterator in a
valid state.
