We'll change mode's on-demand so using IDs identical to the virtual
monitor ID would mean IDs didn't change when changing mode, and that is
rather unintuitive. IDs don't mean much anyhow, just make them grow
within the realm of a 63 bit unsigned integer, as the 64th bit means its
a virtual mode ID. Making sure the ID is in the virtual mode namespace
is handled by meta_crtc_mode_virtual_new().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2270>
We create a cursor renderer per device for those at
meta_seat_native_handle_event_post() with PROXIMITY_IN events, but
the MetaWaylandTabletTool handles the event before that, and goes
with a NULL cursor renderer.
Make MetaBackend::get_cursor_renderer() on the native backend create
those cursor renderers on demand, and only handle PROXIMITY_OUT in
handle_event_post() to dispose those. This makes MetaWaylandTabletTool
happily get a cursor renderer again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/285>
We now only enable DMA buffer based PipeWire screen casting if a
format/modifier has been negotiated. This practically means a consumer
is aware about what is needed, and we should not try to predict that it
uses the DMA buffer the right way (i.e. not mmap:ing directly).
However, in case we're not hardware accelerated, we never want to
attempt to use DMA buffer screen sharing, as we want to avoid
compositing into a DMA buffer on such hardware as doing so can be very
slow.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2086>
Returns TRUE if the active renderer backend can allocate DMA buffers.
This is the case hardware accelerated GBM backends, but FALSE for
surfaceless (i.e. no render node) and EGLDevice (legacy NVIDIA paths).
While software based gbm devices can allocate DMA buffers, we don't want
to allocate them for offscreen rendering, as we really only use these
for inter process transfers, and as buffers allocated for scanout
doesn't use the relevant API, making it return FALSE for these solves
that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1939>
Because both code paths require the existence of `GL_TIMESTAMP[_EXT]`
which is only guaranteed if `ARB_timer_query` (included in GL core 3.3)
is implemented.
We know when that is true because `context->glGenQueries` and
`context->glQueryCounter` are non-NULL. So that is the minimum
requirement for any use of `GL_TIMESTAMP`, even when it is used in
`glGetInteger64v`.
Until now, Raspberry Pi (OpenGL 2.1) would find a working implementation
of `glGetInteger64v` but failed to check whether the driver understands
`GL_TIMESTAMP` (it doesn't).
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2107
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2253>
The way device backends implement power saving differ, and power saving
needs to contain nothing incompatible in the same update. Make it
impossible to e.g. mode set, page flip, etc while entering power save by
not using MetaKmsUpdate's at all for this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
When we're predicting state, i.e. when having posted an update while
avoiding reading KMS state, copy the predicted state, update the actual
state, and check that the predicted state matches the newly updated one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
It was a bit scattered, with it being split between MetaKms and
MetaKmsImpl, dealing with MetaKmsDevice and MetaKmsImplDevice
differentation. Replace this by, for now, single entry point on
MetaKmsDevice: meta_kms_device_process_update_sync() that does the right
thing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
As other KMS tests, depends on being DRM master and vkms being loaded.
Currently consists of a sanity check that checks for the expected set of
connectors, CRTCs, planes, etc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
Right now gamma is set only via the D-Bus API (from gsd-color), but the
actual gamma isn't right after SetCrtcGamma(), meaning if one would call
GetCrtcGamma() right after setting it, one would get the old result.
Avoid this by getting the "current" CRTC gamma from the cache we manage.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
When privacy screen is changed and this happens on explicit user request
(that is not a setting change) we should notify about this via an OSD.
To perform this, we keep track of the reason that lead to a privacy
screen change, and when we record it we try to notify the user about.
When the hardware has not an explicit hotkey signal but we record a
change we must still fallback to this case.
Fixes: #2105
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1952>
Privacy screen events on connector are handled as notification events
that won't cause any monitors reconfiguration but will emit monitors
changed on DBus, so that the new value can be fetched.
We monitor the hardware state so that we can also handle the case of
devices with hw-switchers only.
In case a software state is available it means we can also support
changing the state, and if so expose the state as unlocked.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1952>
In some cases mutter is started in the user scope from a TTY (for
example using toolbox). Using sd_pid_get_session fails because it's not
in the session scope so it falls back to the primary session
(sd_uid_get_display). We want to start mutter on the TTY we started
mutter on however. Instead of relying on the scope to figure out the
correct session we first look at $XDG_SESSION_ID which is set by
systemd_pam.so.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2254>
At first glance the `goto` looks like a loop, or potentially an infinite
loop. It's not a loop because the mode has changed at that point to
`META_SHARED_FRAMEBUFFER_COPY_MODE_PRIMARY`. But we can make it more
obvious and avoid the need for a goto.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2240>
When we test, we might not have a systemd session to rely on, and this
may cause some API we depend on to get various session related data to
not work properly. Avoid this issue by passing fallback values for these
when we're running in test mode.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
There will be another mode added later, 'test'; prepare for this by
changing the existing "mode" boolean ('headless') to a mode, which is
either 'default' or 'headless'. Checking the is_headless variable is
changed to using the function is_headless(), except for one place, being
VT switching, which in preparation is only allowed on the 'default'
mode. Other places where it makes sense, the conditions are changed to
switch statements.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2151>
There was a sanity check that complained if there was still a "next
framebuffer" when disposing an onscreen. This is correct to complain
about under normal operation, as we always wait until receiving the page
flip callback before cleaning up the onscreen and their state.
However, when there are many hotplugs occurring, we might end up with
race conditions when the above sanity check is not valid: when we have
more than one monitor active, paint 1 one of them, but receive a hotplug
event before we paint the other(s), we will discard the already painted
onscreen before really issuing a page flip.
In this situation, we will have the "next framebuffer", but having that
is not a bug, it's a race condition, thus to not leak in this situation,
make sure to clean up the next framebuffer here too.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2081
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2225>
If there are any pending updates, for example if we painted one of
multiple monitors but without having posted the update due to waiting
for another monitor to be painted, but before we paint all of them and
post the update, another hotplug event happens, we'd have stale pending
KMS update. When that update eventually would be processed, we'd try to
apply out-of-date updates which may contain freed memory.
Fix this by discarding any update when we're rebuilding the views. We
can be sure not to need any of the old updates since we're rebuilding
the whole content anyway.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1928
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2216>
This significantly increases the chance of a fullscreen surface buffer
being scanned out instead of being painted via composition. This is
assuming the client supports the DMA buffer feedback Wayland protocol.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2146>
This API can be used to construct a MetaKmsUpdate with plane assignments
that in isolation will be tested against the current KMS state. How it
is tested depends on the KMS implementation; in the simple / legacy KMS
backend, the tests are identical to the current scanout requirements
(dimension, stride, format, modifiers, all must match), and with atomic
KMS, it uses the TEST_ONLY on a real constructed atomic mode setting
commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2146>
Refresh rates >60Hz become ever more common. In order to allow users
to keep hight refresh rates when not running at a natively advertized
resolution, add common refresh rates to our fallback modes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2189>
Right now we often add a duplicate fallback mode that's almost
identical to the native mode. This adds unnecessary clutter to
UIs, thus filter out such modes.
In order to keep the code small, use `MetaCrtcModeInfo` directly
instead of recalculating the values. And to keep consistency, do
the same in the loop above.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2189>
An incorrect assumption that after mode set there would be no pending
page flips was made. This meant that if there was a mode set, followed
by a page flip, if that page flip was for a CRTC on a now unused GPU,
we'd crash due to the renderer GPU data having already been freed. This
commit avoids that by keeping it alive as long as the page flips are
still in the air. It fixes crashes with backtraces such as
0) meta_render_device_get_egl_display (render_device=0x0)
at ../src/backends/native/meta-render-device.c:320
1) secondary_gpu_state_free (secondary_gpu_state=0x1c8cc30)
at ../src/backends/native/meta-onscreen-native.c:560
2) meta_onscreen_native_dispose (object=0x1cb65e0)
at ../src/backends/native/meta-onscreen-native.c:2168
3) g_object_unref (_object=<optimized out>)
at ../gobject/gobject.c:3540
4) g_object_unref (_object=0x1cb65e0)
at ../gobject/gobject.c:3470
5) clutter_stage_view_finalize (object=0x1cbb450)
at ../clutter/clutter/clutter-stage-view.c:1412
6) g_object_unref (_object=<optimized out>)
at ../gobject/gobject.c:3578
7) g_object_unref (_object=0x1cbb450)
at ../gobject/gobject.c:3470
8) meta_kms_page_flip_closure_free (closure=0x1d47e60)
at ../src/backends/native/meta-kms-page-flip.c:76
9) g_list_foreach (list=<optimized out>, func=0x7fb3ada67111 <meta_kms_page_flip_closure_free>, user_data=0x0)
at ../glib/glist.c:1090
10) g_list_free_full (list=0x1cb4d20 = {...}, free_func=<optimized out>)
at ../glib/glist.c:244
11) meta_kms_page_flip_data_unref (page_flip_data=0x1c65510)
at ../src/backends/native/meta-kms-page-flip.c:109
12) meta_kms_callback_data_free (callback_data=0x227ebf0)
at ../src/backends/native/meta-kms.c:372
13) flush_callbacks (kms=0x18e2630)
at ../src/backends/native/meta-kms.c:391
14) callback_idle (user_data=0x18e2630)
at ../src/backends/native/meta-kms.c
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2147>
