Avoid peeking in the stage for loosely related actors, since the same
event could be handled by different actors across the picking stack.
This getter is also unused, so there's wiggle room here for changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
These constructors take all the necessary arguments to build the
event from the get go, so the callers are not left up with the task
of setting up the event struct data.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Despite the attempt to make this a generic interface, this was
pretty much used only by the X11 backend, and now it ported away
from it.
This now stands unused and may be removed, in favor of backends
each creating and injecting events as they please.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
It is a bit backwards that events contain information about
the stage they are being handled by. It makes more sense to
specify in the ClutterEvent handling entrypoint the stage
that will handle the event.
As a first step, add this ClutterStage argument, even though
the information is still carried through the event in order to
keep satisfying calls to the getter function.
This entrypoint has been also renamed to clutter_stage_handle_event(),
so that its ownership/namespace is clearer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Measurements above 100% were originally allowed to show when frame skipping
was occurring so you didn't have to also check the frame rate. But that
also resulted in arbitrarily high jitter values being reported when
returning from idle. And those are frequent enough to look like a bug or
untrustworthy so let's not do that anymore.
Taking the remainder of a high jitter value is still a meaningful jitter
value.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2906
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3123>
clutter_frame_clock_compute_max_render_time_us clamps to the refresh
interval anyway, so the only effect a higher recorded maximum can have
is to delay it falling below the refresh interval again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3090>
Instead of separate pairs of short- and long-term maxima for each
measured step of the frame update process.
This should result in the render time estimate rising less often:
Previously it did whenever the measurement of any of at least 3 out of
4 steps reached a new maximum, even if that didn't result in a new
maximum for the whole update duration. Now it's only in the latter
case.
This should also result in a lower render time estimate (and thus
input→output latency) in general, since the variability of
measurements for each 3/4 steps doesn't always add up anymore. The flip
side of this is that it might result in missing a display refresh cycle
more often.
v2:
* Fix coding style in maybe_update_longterm_max_duration_us.
(Robert Mader)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3090>
This adds some plumbing to get the "default" paint flags for regular
stage painting, where one either wants to paint the overlay, or not.
If inhibited, the 'no-cursors' paint flag is used, otherwise the 'none'
flag. This will be used to allow having a per stage view hw cursor
state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
When a relative pointer motion gets constrained (e.g. a monitor edge or
barrier), save the constrained relative motion delta too.
This will later be used to send the remaining motion delta to input
capture clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
An input only grab is a ClutterGrab on the stage that doesn't have an
explicit actor associated with it. This is useful for cases where event
should be captured as if focus was stolen to some mysterious place that
doesn't have anything in the scene graph that represents it.
Internally, it's implemented using a 0x0 sized actor attached directly
to the stage, and a clutter action that consumes the events. An
input-only grab takes a handler, user data and a destroy function for
the user data. These are handed to the ClutterAction, which handles the
actual event handling.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2628>
A 2D actorless paint volume can't ever need `enlarge_for_effects` because
it has no depth. Clamping to the pixel boundary is sufficient in this case
and avoids extending volumes on the edge of the view into the next view.
Which then avoids unnecessary secondary monitor updates.
Paint volumes correctly become actorless where `clutter_actor_finish_layout`
calls `_clutter_paint_volume_transform_relative`.
Relates to: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6819
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3112>
If an actor's expand properties haven't been set explicitly, its
expand flags are computed by traversing its children.
However we currently also traverse into children when explicitly
setting "expand" to FALSE, because that is the default value and
the properties are only marked as explicitly-set when the value
actually changed.
Fix this, so propagating expand flags can be stopped without
hacks like
```c
g_object_set (actor, "x-expand", TRUE, NULL);
g_object_set (actor, "x-expand", FALSE, NULL);
``
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3088>
This is expected for the common case of direct scanout of Wayland
buffers where transactions guarantee that all buffer fences are
signalled before a buffer is included in a frame.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3080>
Dispatch jitter is how much the dispatch interval has changed between
frames. It's a measure of sampling smoothness for events that are occurring
at a higher rate than the screen is refreshing:
* Mouse movement
* Clients rendering at swap interval zero
* Keyframe animation position
Zero jitter is ideal but will practically never happen, and a jitter value
of several thousand microseconds will be visible to the naked eye as stutter
even if you're maintaining a perfect frame rate.
To make the numbers easier to interpret we also log the jitter as a
percentage of the refresh interval.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3082>
This could happen when moving the cursor over GUIs that only redraw
in response to cursor movement. Mutter would experience alternating
cursor-only updates and page flips, and so the `max_render_time_allowed_us`
would jump between pessimised and optimised resulting in inconsistent
frame pacing.
Aside from fixing the smoothness problem this should also provide
lower latency cursor movement.
Fixes: https://launchpad.net/bugs/2023766
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3074>
Currently, we let the same function handle key event filtering as they
are passed to the IM, and the IM events resulting in actions like text
commit or preedit changes.
Split these two aspects into filter/process functions, and port
ClutterText to it. MetaWaylandTextInput still handles everything in
a single place, but that will be split in later commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3044>
This will consist of device-added events, meaning before init finishes,
we can derive some state that depends on the set of input devices
available on startup, such as cursor visibility.
This avoids cursor visibility switching between hidden and visibility
during startup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3070>
This is different from "warping" as it doesn't necessarily result in a
pointer motion event. This can be helpful during initializing so we can
avoid faked pointer events that would otherwise need to be special cased
to not appear as actual pointer movements.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3070>
The stage already maintains its own list of stage-views via
clutter_stage_peek_stage_views(), it's a bit superfluous to copy that list
around all the time into priv->stage_views of ClutterActor. Let's deal with
that by returning clutter_stage_peek_stage_views() when
clutter_actor_peek_stage_views() gets called for the stage.
In order to make sure ClutterActor::stage-views-changed still gets emitted
correctly for the stage, always emit that signal on the ClutterStage when
the stage views get invalidated. This now depends on the backend only
actually invalidating the views and calling
clutter_stage_clear_stage_views() when things have actually changed, but
that should be the case.
This needs a change in one of the stage-views tests, namely the one which
tests stage-view-changed emission on the stage: Here we now see an emission
of stage-views-changed, but that signal emission actually seems correct.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
While we're now doing a fairly good job at not needing those matrices
all the time anymore, we still need it multiple times during every paint
cycle, so it definitely makes sense to introduce some caching here.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
With commit 5a565b4258, we changed
clutter_actor_finish_layout() to be not only about updating stage views,
but also take care of updating the visible_paint_volume, for that we
started doing a full tree traversal of all mapped actors.
This can be quite a performance issue, apparently especially on certain
ARM devices, where the simple tree traversal can take as long as 2ms.
This is precious time we need to paint our next frame, so lets do a bit
more work to avoid those useless traversals.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/2459
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
We're using clutter_stage_schedule_update() now from ClutterActor to kick
off the stage updating machinery when a redraw needs to happen.
This introduced a bunch of unnecessary calls to
clutter_stage_schedule_update() and thus
clutter_stage_view_schedule_update() when multiple actors request redraws
during the same stage update cycle, which is a very common case.
Cut off all those unnecessary calls by bailing out in
clutter_stage_schedule_update() when updates are already queued.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
Using a list of heap allocated ClutterPaintVolumes adds quite a bit of
unnecessary overhead: It means for every single redraw clip we allocate a
list and a paint volume on the heap.
Let's avoid all those heap allocations by using a GArray with static
ClutterPaintVolumes instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
So far our logic for queueing redraws goes like this: Actor notices that it
needs to redraw -> actor tells stage that it needs to redraw via
clutter_stage_queue_actor_redraw() -> stage collects more and more redraws
into a QueueRedrawList before the actual stage update happens -> when
that happens, the stage collects the actual redraw clips from the actors via
clutter_actor_get_redraw_clip().
The logic behind this QueueRedrawList was that by storing a list of
redraw entries on the stage, way we can avoid traversing the whole actor
tree one more time to build the redraw clip before the stage update.
These days we have clutter_actor_finish_layout() though, which is basically
exactly that, a whole actor tree traversal that happens before every stage
update.
Since we have that now, we might as well get rid of the whole dance back and
forth between ClutterStage and ClutterActor, and simply merge the logic to
queue redraws into the finish-layout step.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
If no actors have changed their positions and we're only repainting
because a window needs a repaint, the paint volumes of all actors
remain unchanged. There is no reason to redo those paint volumes on every
stage update.
So introduce caching and invalidation logic for the visible_paint_volume
that allows us to avoid a ton of matrix multiplications that right now
are happening for the whole mapped actor tree on every redraw.
Note that this removes two places where the visible paint volume is set
to an empty paint volume: This is a compromise so that we can keep
around the cached pv when hiding and showing an actor, it does "regress"
one case though: When hiding -> moving -> showing an actor, we'll now
include the old paint volume of the actor in the redraw clip on show (even
though redrawing that old region is not necessary, the actor was hidden
after all). This results in a bit of overpaint in this very specific case,
but for the sake of simplicity let's not care about that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2679>
When building mutter with -Ddebug=false, a warning appears, that
`ClutterStagePrivate *priv` is unused.
Simply remove this variable and directly use `stage->priv` in
`CLUTTER_NOTE` to get rid of this warning.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3046>
ClutterText paints selected text using the selection_paint()
function. This function has to main branches of execution:
when the position is in the selection bound, or not. In the
former, we are leaking the CoglPipeline created by copying
the default color pipeline.
Unref the copied pipeline after using it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3007>
For now, it goes the "easy" way of creating the root node and
immediately painting and destroying it. From now on, the main
root node is created only by ClutterStage itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3007>
This aims to reduce the amount of pixels that have to be redrawed on the
screen on a clipped actor redraw in case using the union of two
different clips in a surface will substantially increase the redrawn
area.
This should not result in excessive memory consumption as callers of
`clutter_actor_queue_redraw_with_clip` are expected to ensure that the
redraw clip rectangles are adequately deduplicated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2965>
mutter-clutter is a private library that is only used by the shell and
not meant to be ABI/API compatible in between versions, so there's no
need to add padding to classes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2903>
This is needed by GNOME Shell to remove itself as a input method
implementation during its shutdown sequence. We can't do it ourself
later because at mutters own shutdowns equence, the GNOME Shell
Javascript context has by that time already been teared down.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2934>
It will be used to schedule Wayland frame events independently from both
update and presentation time, as the former may happen multiple times
frame and the later not at all.
For frame events we want a timing that is just late enough to ensure
that a following commit by a Wayland client will not get included into
the current frame any more.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2823>
This is not yet used, but next commits will need to assign a frame
to the paint context whenever painting onscreens.
Assigning a frame to the paint context is a one-way operation, and
treats multiple assignments strictly as a programming error.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2804>
Both Clutter and Cogl use g_return(_val)_if_fail() to safeguard
introspected API. Release builds were dropping these checks, which could
result in a much more crashy experience, especially when considering
extensions, but also due to bugs in the shell code itself.
This won't affect any major distro, because they all use "plain" builds.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2930>
Stage view users can schedule updates at ease with
clutter_stage_view_schedule_update(), but couldn't schedule update
"now". Make that easy too by adding
clutter_stage_view_schedule_update_now().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
If we call schedule(), which will schedule an update some time in the
future, and then schedule_now(), we should reschedule the frame clock to
update immediately, and not some time in the future.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
For motion-induced crossing events, this will be the device that generated
the motion. For code-induced crossing events (e.g. grabs or actors disappearing)
this will be none.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2828>
Since the last commit, ClutterStage automatically cancels an implicit
grab (including all its ClutterActions) when a conflicting ClutterGrab
appears.
This means we no longer have to look out for GRAB_NOTIFY crossings in
ClutterGestureAction and can instead depend on the sequence_cancelled()
vfunc for this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
A ClutterGrab takes precedence over implicit grabs, so when one happens,
let's check which part of the implicit grab tree is inside the new
ClutterGrab. Cancel and remove the parts which aren't, and if nothing
is in there anymore, cancel the whole implicit grab.
Emitting crossing events correctly here is getting quite tricky:
- When the implicit grab didn't get cancelled by the ClutterGrab, we
simply want to emit all GRAB_NOTIFY crossings to the implicit grab, as
we do with all other crossings.
- When the implicit grab did get cancelled and the new ClutterGrab wants
to emit ENTER crossings, we want those to be emitted to the actual
targets, so cancel the implicit grab before emission.
- In the last case where the implicit grab did get cancelled and the new
ClutterGrab wants to emit LEAVE crossings, those should be emitted to
the implicit grab again, so we cancel the grab only after the emission
of those.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
Now that we have two kinds of grabs, the intricacies of event delivery
got slightly more complicated. So this seems like a good point to
introduce a new GRABS debug flag that gives an overview of which grabs
are currently in effect.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
We're almost there, everything is in place to notify ClutterActions
about a sequence getting pulled away under its feet.
The only thing that's missing is the actual notification to actions now,
so let's do that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
Another baby step just like the last commit: This commit takes care of
the opposite case: An action handling a sequence event stops further
emission of events to actors.
Since sequences remain around for longer than the context of just a
single event, it makes sense to provide a way to "claim" those sequences
even when outside of event handling context, so introduce API for that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
As soon as any event of a sequence is handles/stopped during emission,
all actors and actions that would have gotten to see it afterwards have
a big problem: If that event was a TOUCH_END event, the actor/action is
forever going to think that this touch is still active.
For ClutterActions, we're going to handle this by introducing a way to
send them a notification when stuff like this happens.
As a baby step towards all that, make event emission exclusive to actors
as soon as any actor stopped an event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
We'll soon introduce a new gesture tracking framework which heavily
depends on ClutterActions seeing all events of a sequence. For this to
work, a larger change to event delivery is needed: Implicit grabbing of
all events for button and touch press->motion->release sequences to
ensure ClutterActions continue receiving events for the whole sequence.
This commit takes care of that: At the start of an event sequence we
collect all the event-handling actors and actions to a GArray that lives
in the PointerDeviceEntry, and then deliver all events belonging to
that sequence to the same actors/actions until the sequence ends.
To avoid events getting pulled from under our feet when mutters event
filter returns CLUTTER_EVENT_STOP, this also introduces private API
(maybe_lost_implicit_grab()) on ClutterStage so that we can't end up
with stale sequences.
Note that this also slightly changes behavior when it comes to event
delivery to actions: Because we now store actions separated from their
actors, any action returning CLUTTER_EVENT_STOP now stops event
propagation immediately. That was different before, where we'd emit
events to all actions of the actor and only then stop propagation.
Note that this isn't handling ClutterGrabs correctly right now,
this will be a little tricky, so we'll take care of that in a future
commit.
To handle actors getting destroyed or unmapped during a grab, listen to
notify::grab on the deepmost actor in the implicit grab tree. This gives
us a notification when any actor inside the tree goes unmapped.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
A fairly small refactor, move the emission of events to actions from
clutter_actor_event() to stage level.
We do this because in the future we'll need to know on stage level
whether events were handled by an actor or by an action.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
_clutter_actor_handle_event() currently allocates a new GPtrArray on the
heap for every single event emission, let's avoid this by keeping an
array around in ClutterStage and reusing that.
This is moving the last few bits of event emission into ClutterStage,
which will be useful when we introduce implicit grabbing in subsequent
commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
There's no real reason to keep those events exclusive to the stage, some
actors or actions might want to get notified about proximity events too,
so propagate them like any other event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
Right now and due to loads of refactorings lately, the event emission
paths are a bit cluttered (ha ha ha) around in Clutter. For example the
event target actor gets set in clutter-main.c, but event emission is
actually managed by ClutterStage these days.
Since we'll introduce implicit grabbing of touch/button-press sequences
soon, let's shuffle things around a bit to make that easier:
Move event emission to the stage, it now gets a ClutterEvent without any
extra context like the target actor from clutter-main. The stage then
looks up the target actor itself and emits the event to the appropriate
actors in the scenegraph. A special path is introduced for emitting
crossing events, because here the event-receiving actors don't follow
the "capture+bubble from pointer actor to grab actor" rule.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
Crossing events should never be stopped during event emission. We
already have a check that enforces this in clutter_actor_event(), but
ClutterActions still sometimes try to stop crossing events from
propagating.
Improve that situation and return CLUTTER_EVENT_PROPAGATE when handling
crossings in ClutterActions, too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
There's still a possibility that some events remain within the
`ClutterMainContext` when it's being unref-ed for the last time (as seen
on asan logs). Make sure they get freed by using
`g_async_queue_new_full()` and specifying the appropriate destroy
function.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2817>
Calculating a timestamp from the past distorts the dispatch lateness
calculation, leading to an inflated max_render_time, which again
increases the likelyhood of next_update_time being in the past.
Fixes 99850f4645
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2819>
