For secondary GPU rendering contexts we currently might choose an EGL
config with a format which is not supported on all primary planes. The
renderer is created when a GPU is detected and lighting up outputs and
thus assigning CRTC and primary planes can happen at any point after
that. This means we have to make sure that all possible plane
assignments will work with the rendering context when we create it.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3235
Fixes: cc7bca073 ("crtc/kms: Dynamically assign primary and cursor planes")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3512>
It can be used to force a specific RGB range. Some monitors don't follow
the specification and expect a signal different from what we send. This
property allows to force a mode which hopefully then works correctly for
the sink.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3535>
A ring will naturally go from 355 degrees to 5 degrees (or vice versa),
giving us the illusion of a direction change. Avoid this by assuming
that any change larger than 180 degrees is actually the equivalent
smaller change in the other direction.
Closes#1885
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3545>
BTN_STYLUS is the lower one and traditionally (read: in X) maps to
middle button (2), BTN_STYLUS2 is the upper one and traditionally maps
to right button (3).
This is also what GTK does and our desktop actions too map MIDDLE to
BTN_STYLUS and RIGHT to BTN_STYLUS2.
See also gtk!6168
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3541>
The code that maybe flushed IM state before processing a key event
became ineffective at commit 7716b62fa2, since the handle_event()
method on MetaWaylandTextInput won't handle key events, only IM
events and touch/button press events causing IM state to be
committed. Basically, the events that directly change the IM state.
Move this ineffective code to the the filter_event() method handling
the key presses in order to let the IM maybe filter them, and handle
them so that any key event that is let through (both key events
previously injected by the IM, and key events that the IM chooses to
ignore) will ensure that the pending IM state is flushed before the
key event is handled and emitted to the client.
This brings back lost guarantees of orderly event emission when IMs
alternate key events and IM actions.
Fixes: 7716b62fa2 ("clutter: Separate ClutterInputFocus event processing and filtering")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3090
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3536>
adwaita-icon-theme updated its cursor metaphors and changed all DnD
cursors to use arrows instead of hands, except for the grab related
ones. Mutter was using "grabbing" as default DnD cursor, which now
does not match the other DnD cursors ("copy" and "no-drop") anymore.
Change this to the "default" cursor.
Additionally, because the "no-drop" cursor now puts a stronger emphasis
on the crossed out symbol also prefer "default" for
META_CURSOR_DND_IN_DRAG and only use "no-drop" for things that
explicitly don't accept a drop.
Related: https://gitlab.gnome.org/GNOME/adwaita-icon-theme/-/merge_requests/63
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3532>
When Wayland clients send commits without a buffer attached ("empty"
commits), they may lead to stage updates that do not result in any
frame being submitted for presentation ("empty" updates).
Due to how frame scheduling is handled, there can be many such
"empty" updates in a single refresh cycle. If frame callbacks were
emitted after each of these "empty" updates, and if the client
sending "empty" commits was using frame callbacks to throttle the
same logic that results in these "empty" commits being sent, it would
result in a feedback loop between Mutter and the client where the
client would send "empty" commits and Mutter would reply almost
immediately with a frame callback causing the client to send "empty"
commits continuously.
As such, when an "empty" update is detected, frame callbacks are
scheduled to be emitted only once in every refresh cycle, avoiding the
feedback loop.
When a "non-empty" update is detected, frame callbacks are instead
emitted immediately to allow clients to draw their next frame as soon
as possible. It is safe to emit frame callbacks in this case because
the frame for the current refresh cycle is already "finalized" and
that any commit sent by the client at that point would only be handled
in a future refresh cycle.
To implement this, the previous logic had used
meta_frame_native_had_kms_update() to detect "non-empty" updates,
assuming that those would always result in a KMS presentation with the
native backend.
However, this approach misses the fact that virtual monitors do not
use KMS, and as such do not result in KMS presentation even for
"non-empty" updates. As a result, frame callbacks would not be emitted
immediately, resulting in unintended throttling of client rendering.
Instead, assume that it is safe to emit frame callbacks immediately
whenever an update results in the frame clock waiting to be notified
of presentation, since this is also when commits sent by clients are
scheduled to be handled in a future refresh cycle.
This issue was mostly hidden because frame callbacks would be sent
immediately when the target presentation time for the frame had
changed compared to the previous frame. However, this behavior was
removed in 26d8b9c69 ("wayland: Remove unnecessary dispatch of frame
callback source"), exposing the issue.
Fixes: a7a7933e0 ("wayland: Emit frame events in GSource after "empty" updates")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3263
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3549>
Calculate the frame deadline in ClutterFrameClock's
calculate_next_update_time_us() rather than in MetaWaylandCompositor's
on_after_update().
The specifics of the deadline calculation for a given frame should be
implementation detail of the frame clock and and remain internal to
allow extensibility.
This extensibility is specifically useful for scenarios where a
different deadline calculation is needed due to alternative frame
scheduling logic, such as for VRR.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
To avoid communicating lower frame rate to clients through frame
callbacks, it is important to avoid delaying the source dispatch when
a dispatch is already scheduled.
To that end, the previous logic would emit pending frame callbacks
immediately in case a source dispatch was still scheduled for the
previous refresh cycle and then (potentially) schedule another source
dispatch for the current refresh cycle.
However, emitting pending frame callbacks immediately would send
frame events for every pending frame callback, including for the
current "empty" update. Scheduling another source dispatch for the
current cycle was then unnecessary and potentially undesirable
because there may not even be another "empty" update during the cycle.
Instead, let the already-scheduled source dispatch handle emitting any
pending frame callbacks, and do not schedule an additional source
dispatch for the current cycle as it may not be needed.
This approach is useful because it removes an implicit assumption
that the refresh rate is fixed and that target presentation time
remains constant within a refresh cycle. This assumption does not
apply for VRR.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
The value of this variable represents the last point in time in
which an update would be allowed to scheduled for the given frame.
Rename it for clarity and in preparation for the next commits.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
The value returned from clutter_frame_get_target_presentation_time()
is always same as the value returned from
clutter_frame_get_min_render_time_allowed() when they are called
consecutively because both functions effectively return the value of
frame->has_target_presentation_time. This is with the assumption
that this variable is only ever modified by the same thread that
also executes on_after_update().
As such, a case where the former returns FALSE after the latter
returned TRUE is not possible, which means the line that sets
"target_presentation_time_us = 0;" is effectively unreachable.
Acknowledging this fact allows the call to
clutter_frame_get_target_presentation_time() to be moved outside the
"else" case and into the "if" condition itself. This is done in
preparation for the next commits.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
In various public APIs, Clutter used to return a PangoDirection
while we have a text direction enum defined in Clutter.
This allows us to drop pango dependency from meta making it specific
to cogl-pango & clutter
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3531>
It adds the following clarification:
```
Starting from version 5, the invalid_format protocol error is sent if
all planes don't use the same modifier.
```
We already send an error, just the wrong one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3450>
Set the deadline timer state as "inhibited" in case a permission error
is returned while attempting to arm the deadline timer. This makes each
device enable its deadline timer again after a VT switch.
Also print a note in this case instead of a warning as such errors are
expected during a VT switch and should not raise concerns.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3259
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3534>
For now, this function only enables the deadline timer in case it was
inhibited. This would result in an attempt to use the deadline timer
again after a device is resumed.
If the conditions that resulted in the timer becoming inhibited
remain, it is expected to return to this state after the next frame
and before being armed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3534>
The "disabled" state indicates that the deadline timer is disabled
for the lifetime of the device, while the "inhibited" state indicates
that it is disabled temporarily for the device.
This distinction is needed to handle each state differently in a
following commit. For now, only "disabled" is used.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3534>
This allows GNOME Shell to communicate the user desired XKB model
to the compositor instead of sticking with the pc105 default.
Particularly useful for those with a custom keyboard layout/irregular
keyboards.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2760>
Transient dialogs are meant to be placed centered over their
parent. However as we don't use the DIALOG window type on
wayland, this currently only works for modal dialogs.
To fix this, also apply the policy to NORMAL windows for
wayland clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3533>
Some panels only support fixed resolutions and fixed refresh rate with reduced blanking:
Established Timings I & II: none
Standard Timings: none
Detailed Timing Descriptors:
DTD 1: 2560x1600 120.001823 Hz 8:5 203.283 kHz 552.930000 MHz (345 mm x 215 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 6 Vback 85 Vpol N
DTD 2: 2560x1600 48.000295 Hz 8:5 81.312 kHz 221.170000 MHz (345 mm x 215 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 6 Vback 85 Vpol N
...
Minimum Pixel Clock: 552922 kHz
Maximum Pixel Clock: 552922 kHz
When using mirror mode, resolutions like 2560x1440 120Hz can be too high
to meet the pixelclock limitation, so 2560x1440 90Hz is selected
instead. However, the panel only supports 120Hz so using 90Hz result to
failed mode set.
So add reduced blanking to fallback mode, so correct refresh rate can be
used.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3449>
Since StDrawingArea in gnome-shell is the only user of ClutterCanvas,
it is possible to move ClutterCanvas completely out of Mutter to
gnome-shell. This allows to remove another Cairo dependency from
Mutter.
This patch removes ClutterCanvas code from Mutter.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3470>
To paraphrase jadahl: we have a dedicated KMS thread now, which also
has realtime scheduling enabled unconditionally. realtime scheduling
on the main thread isn't too great of an idea, considering GC can
take a hot minute.
And to quote rmader: we most likely won't be able to make the main
thread rt as long as we use GJS and thus have GC.
So let's get rid of it! It's just been breaking things anyways.
This just ignores the setting; we'll fully remove it when GNOME 46
comes around.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3296>
This is the unified focus (key, IM, pads, ...) for the focus window.
Just like MetaWaylandPointer and others keep track of the "current"
surface, this is the "current" surface for those (not necessarily
the focused surface, e.g. in the case of compositor grabs).
Since this unified focus will exist regardless of keyboard
capabilities (e.g. even if just for "logical" focus like IM/clipboard
that does not depend on input devices), it does not make sense
to trigger a focus sync on keyboard capability changes, the focus
is staying the same, we however need to focus the keyboard interface
to the already existing focus when the capability is enabled.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3511>
Instead of letting the MetaDisplay be aware of the Wayland compositor,
and take care of updating its focus. This makes the MetaWaylandCompositor
able to track focus changes by itself, using MetaDisplay as the source
of truth.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3511>
If we happen to be changing focus to a window *while* taking focus
away from Clutter widgetry, we would unintendedly trigger reentrance
in a way that the old focused window remained in focus, by asking
to focus the default focus window in an untimely manner.
To handle this reentrancy, delay dropping the Clutter key focus
until the window focus changed, so that the focus change will look
up the default focused window in the workspace, and find the up to
date one.
Fixes: ae102ee301 ("x11: Refactor ClutterStage key focus management")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3467>
Trying to get the xwindow of a wayland only window would fail when
casting to a x11 window. Which happens as
meta_x11_display_set_input_focus is called whenever the focused
window changes, whether it is a wayland or x11 one
Fixes: bc9cd123e ("window: Move xwindow to WindowX11")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3506>
For tablet device, the tool was created when the "Wacom Serial IDs" prop
changed values. This property does not exist on the xf86-input-libinput
driver but v1.5.0 of that driver has a different property for the serial.
The serial is constant (the driver creates one X device per serial), so
we can fetch it after device creation and set it then. For earlier
versions of the driver we assign the random serial 0xffffffaa - good
enough to have at least a tool.
This fixes the crash in #3120 - clutter_event_motion_new()
overrides event->device to the tool's device (if any). Without a tool
motion events use the Virtual Core Pointer instead and our source device
is never added to the stage's priv->pointer_devices.
When we generate an crossing event (which uses the source device) we
fall afoul of an assert in clutter_stage_update_device() that expects
our source device to be in priv->pointer_devices.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/3120
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3383>
DRM's kms atomic code was updated to include an API to set the mouse
cursor hotspot. This has historically been missing in the atomic kms
which meant that the virtualized drivers which require mouse cursor
hotspot info to properly render had to be put on a deny list and
had to fallback to the legacy DRM kms code.
Implement the new hotspot API by checking whether the device supports
hotspot properties and if it does set them on the cursor plane. This
enables atomic kms on all virtualized drivers for kernels where
mouse cursor hotspots are in drm core.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3337>
Add META_KMS_PLANE_PROP_HOTSPOT_[X,Y] properties
to the MetaKmsPlaneProp enumeration, and
properly initialise them.
Also, add a convenience method in meta-kms-plane
(i.e., `meta_kms_plane_supports_cursor_hotspot`)
to check whether a plane supports hotspot
property setting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3337>
Based on the pressure curve control points sample a bezier curve and
then look up the pressure at that point of the curve.
We sample 256 points and do linear interpolation in between, this
strikes a balance between having to calculate the point for all
8K pressure points a modern pen supports while still giving us
reasonable detailed curves.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3158
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3399>
This keeps the existing ClutterBezier implementation but changes
the visible API to match the needs of the tablet tool pressure curve:
a bezier defined within a [0.0/0.0, 1.0/1.0] box,(sampled
into a set of x->y mappings for each possible pressure input x, and
a lookup function to get those values out of the curve.
This patch moves the internally-only functions to be statics and changes
meta_bezier_init() to take only the second and third control point, as
normalized doubles. Because internally we still work with integers, the
bezier curve now has an integer "precision" that defines how many points
between 0.0 and 1.0 we can sample.
The meta_bezier_rasterize() function calculates the x->y mapping for
each point on the bezier curve given the initial scale of the curve.
That value is then available to the caller via meta_bezier_lookup().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3399>
The ClutterBezier code was removed in
580d62b9b clutter: Remove unused Path related types
because it wasn't used anywhere. We do need a bezier curve for the
tablet tool pressure curve calculation though so let's move it
to the native backend and rename it to MetaBezier in the process.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3399>
This addresses the following race condition:
1. Window+MetaFrame are created non-fullscreen, _MUTTER_FRAME_EXTENTS
is initialized through widget measuring, accounting for frame.
2. Window and MetaFrame become fullscreen.
3. MetaFrameContent gets first size allocation, already fullscreen.
4. Borders were initialized to 0,0,0,0, become set to 0,0,0,0 correctly
reflecting fullscreen, however notify::borders is not emitted.
5. _MUTTER_FRAME_EXTENTS stays accounting for the frame extents.
It sounds sensible to have the borders initialized to a meaningful value,
so account for the first time the border would be set due to the content
being (re)sized, and let this first value trigger notify::borders resulting
in _MUTTER_FRAME_EXTENTS updates.
Since all later _MUTTER_FRAME_EXTENTS changes happen through content
resizes, we only have to cater for this initial handover between the
frame/content initialization paths done through widget measuring and
the later paths done through MetaFrameContent resizes.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2937
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3476>
The test makes sure the YCbCr formats create the expected image and we
don't accidentally break it.
Like all wayland tests, this is now part of mutter/wayland, mutter/tty,
and mutter/kvm and will use either shm or dma-buf depending on which
suite is chosen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
Finding the shm offset and shm stride for each plane is the main issue.
The rest is just creating multiple textures for each plane.
One assumption is that shm planes are always contiguous in memory so the
next plane comes directly after the size of the current plane.
The size of a plane is determined by the height and stride. There is
only a single stride parameter for shm buffers but we assume that the
first plane is always non-subsampled which gives us a number of "logical
elements" on one line (stride / bpp of the first plane). The stride of
the other planes is then the number of logical elements devided by the
subsampling factor and multiplied by the bpp of the plane.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
The assumption is that all planes are always contiguous, and we don't
have any multi-plane formats where the first plane is subsampled.
The stride of the entire buffer is then just the stride of the first
plane and the stride of the other planes is derived from that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
Instead of forcing every user of WaylandBuffer to create a listener and
destroy the wl_resource and the WaylandBuffer object, provide a default
listener which does it for the user.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
The texture coordinates of all planes should be the same in theory so
using the coordinates of the first plane works.
The reason for this change is that Cogl somehow doesn't manage to get us
the correct coordinates for the 3rd plane in some circumstances. This is
really a workaround but not wrong in any way.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3176
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3469>
ClutterInputFocus/GtkIMContext uses char based offset for
delete_surrounding, however, text_input_v3 uses byte based offset for
it. Currently only GTK with mutter can work correctly via text_input_v3
because they both forget to convert between char based offset and byte
based offset.
This commit fixes it in mutter by saving committed surrounding text in
MetaWaylandTextInput and converting char based offset to byte based
offset with the UTF-8 encoded surrounding text.
Fixes <https://gitlab.gnome.org/GNOME/mutter/-/issues/2146>.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2712>
Calculating the mipmap width as half of the texture width leads to a
mipmap width of zero for textures with width of 1 which leads to an
early exit instead of a mipmap texture.
Fixes: 16fa2100d ("shaped-texture: Stop using MetaTextureTower and use GL mipmapping instead")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3468>
A surface commit may change the buffer scale but not attach a new
buffer. In that case, the size of the previously attached buffer needs
to be consistent with the new buffer scale.
Fixes: 7649e2f3ab ("wayland/surface: Move buffer size check to meta_wayland_surface_commit")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3466>
meta_wayland_surface_get_buffer_width/height uses the currently applied
buffer, which may have a different size.
Fixes: 7649e2f3ab ("wayland/surface: Move buffer size check to meta_wayland_surface_commit")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3466>
Multiple reasons:
* More consistent with the protocol spec language.
* Ensures the size is checked and the protocol error sent from a
protocol processing context, instead of whatever context
meta_wayland_surface_commit might get called from.
* The latter implies that surface->resource is guaranteed to be valid.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3211
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3463>
Integrate it into the code, instead of depending on MetaDisplay
notify::focus-window for it. Now, instead of focusing explicitly the
stage window, we focus a NULL window, and let the MetaX11Display
determine whether focus should go to the stage window if there's
a focused actor, or the no_focus_window if nothing has focus.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3269>
We currently offer the mechanism for GNOME Shell to implement, and
while this is not exercised often (our entries are typically surrounded
by a ClutterGrab ensuring key events, so this is reserved to grab-less
entries, probably there are some in extensions), this is arguably
something Mutter should cover by itself without GNOME Shell guidance.
This is only necessary on the X11 backend, although it is conceptually
more tied to the MetaX11Display connection, so perform the focus
tracking there only if not running as a Wayland compositor (i.e. --x11).
This avoids the only case where the low-level
meta_x11_display_set_input_focus_xwindow() function is used, or rather
makes it completely a MetaX11Display implementation detail, leaving
only the MetaDisplay API as the high-level entry points to handle
window key focus.
The public API that allowed GNOME Shell to implement these mechanisms
is also gone in this commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3269>
There might not be a single plane that is "for" a CRTC, so remove the
API that made it appear as if it did. The existing users only cared if
there was some plane for said CRTC, so replace the getters with API that
just checks the existance at all.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
When there are a set of primary planes, and a set of CRTCs, where each
plane can be used on multiple CRTCs, we need to make sure that when we
mode set and page flip, each CRTC gets assigned an individual plane that
isn't used with any other CRTC.
Do this during the monitor resource assignments that sets up later to be
applied configurations of the mode setting objects, but with the new
hooks into the backend, so that we don't need to teach the monitor
config manager about planes.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2398
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
