sungmg/mutter-performance-source
1
0
Fork 0
Code Activity
6520 commits 14 branches 4 tags 92 MiB
Commit graph

6520 commits

This branch
This branch
All branches
Author SHA1 Message Date
Giovanni Campagna
e215f3f5eb monitor-config: prevent assert that at least one output is connected 
Apparently some connector technologies don't distinguish between
on and off, and there might be valid use cases for running without
any connected monitor.
In that case, just avoid any configuration at all.

https://bugzilla.gnome.org/show_bug.cgi?id=709009
 2014-04-09 12:13:32 -07:00
Florian Müllner
7ac66faa72 tower: Fix erroneous return value 
The function's return value is void, not gboolean.
 2014-04-09 12:10:24 -07:00
Robert Bragg
d0b870d3a9 tower: make sure not to blend when updating tower 
Each level in the tower is initialized by binding the texture for that
level to an offscreen framebuffer and rendering the previous level as a
textured rectangle. The problem was that we were blending the previous
level with undefined data so argb32 windows with transparencies would
result in artefacts. This makes sure to disable blending when drawing
the textured rectangle.
 2014-04-09 12:10:17 -07:00
Jasper St. Pierre
99ad5c00a7 texture-tower: Remove CPU codepath for mipmap generation 
The CPU codepath for mipmapping is unusably slow, and we expect modern
graphics cards with modern TFP/FBO support.
 2014-04-09 12:10:00 -07:00
Jasper St. Pierre
797c46ba7d events: Fix event handling for window menus under X11 
We need to pass XI_Enter / XI_Leave events for GTK+ windows to GTK+,
rather than eating them.
 2014-04-09 11:38:49 -07:00
Nirbheek Chauhan
ab0bd59f5e window-props: _NET_WM_WINDOW_OPACITY range is 0xffffffff to 0 
After reading the atom, scale the value from 0xffffffff to 0xff. Not doing so
causes Clutter to truncate the opacity value, and only read the last two digits.
Hence, 0x7fffffff (50%) becomes 0xff (100%).

https://bugzilla.gnome.org/show_bug.cgi?id=727874
 2014-04-09 16:40:10 +02:00
Rui Matos
feca0fb512 xwayland: Re-sync input focus when associating a surface to a window 
When the MetaWindow is created we don't have the surface yet and thus
we can't set input focus to it so we need to try again when we get the
surface.
 2014-04-09 11:20:28 +02:00
Jasper St. Pierre
2f229c3928 display: Remove code to calculate the above-tab keycode 
We always know it will be KEY_GRAVE + 8.
 2014-04-07 17:56:00 -04:00
Jasper St. Pierre
a730361d6c Use libxkbcommon keysym names everywhere 2014-04-07 17:56:00 -04:00
Jasper St. Pierre
db058d4a81 keybindings: Use xkb_keysym_get_name 2014-04-07 17:56:00 -04:00
Jasper St. Pierre
15cf804dbc keybindings: Eliminate the use of the stored modmap 
We can simply check the XKB keysym here to see if it's a modifier.
 2014-04-07 17:55:59 -04:00
Jasper St. Pierre
b38b037092 keybindings: Don't bother saving num_lock / caps_lock in MetaDisplay 
It's unused outside of this one function.
 2014-04-07 17:55:58 -04:00
Jasper St. Pierre
42bcad6549 display: Ignore the modmask passed into meta_display_begin_grab_op 
A careful analysis of mutter's codebase shows that nothing actually
passes anything but 0 to this. gnome-shell has one instance, but it's
most likely a mistake.

Remove the grab_mask field and the one place in keybindings.c that uses it.

The parameter to begin_grab_op is left in for API compatibility reasons.
 2014-04-07 17:45:52 -04:00
Jasper St. Pierre
b0ea0afd2f display: Remove meta_display_get_ignored_modifier_mask 
It's unused, in both here and in gnome-shell.
 2014-04-07 17:16:29 -04:00
Jasper St. Pierre
1d08d75108 keybindings: Rename and move keysym_to_keycode 
This makes it more what it's actually doing.
 2014-04-07 16:02:08 -04:00
Jasper St. Pierre
4daf20483d keybindings: Handle META_KEY_ABOVE_TAB in get_keycodes_for_keysym 
We're going to switch to get_keycodes_for_keysym for the other
bindings, so add that special case here.
 2014-04-07 16:01:24 -04:00
Jasper St. Pierre
96b6dcec01 display: Kill some bad whitespace 2014-04-07 16:00:17 -04:00
Jasper St. Pierre
9fe5a3b407 keybindings: Fix style 2014-04-07 16:00:17 -04:00
Jasper St. Pierre
a7d4713393 accel-parse: Add a notice about where the code came from 2014-04-07 11:25:16 -04:00
Jasper St. Pierre
4d4ecae2a1 accel-parse: Clean up trailing whitespace 2014-04-07 11:24:23 -04:00
Jasper St. Pierre
545c3b6678 accel-parse: Clean up error handling 
Now that we have the code in-tree, we can change the API to actually
report an error rather than checking afterwards.
 2014-04-07 11:21:36 -04:00
Jasper St. Pierre
e70f336a09 accel-parse: Use libxkbcommon for keysym parsing 
This kills our dependency on GTK+ / GDK entirely.
 2014-04-07 11:19:41 -04:00
Jasper St. Pierre
806f1742ac accel-parse: Switch code to output MetaVirtualModifier directly 2014-04-07 11:19:40 -04:00
Jasper St. Pierre
0dc63f395d accel-parse: Remove support for <Release> 2014-04-07 11:15:01 -04:00
Jasper St. Pierre
616f1a09b1 accel-parse: Add keycode parsing as well 2014-04-07 11:15:01 -04:00
Jasper St. Pierre
50e69109b6 accel-parse: Integrate Above_Tab parsing code directly into our copy 2014-04-07 11:15:01 -04:00
Jasper St. Pierre
242784d3e4 accel-parse: Copy the code from GTK+ in-tree 
We can't use GTK+ for accelerator parsing under Wayland, since we
don't want to go through Xwayland to make that happen.
 2014-04-07 11:14:35 -04:00
Jasper St. Pierre
0466fe9301 Move meta_ui_parse_accelerator into core/ 
We're currently using GTK+ for this, but we'll stop doing that fairly
quickly and instead just copy the GTK+ code in-tree.
 2014-04-07 10:59:46 -04:00
Jasper St. Pierre
dbf5d8f9bc ui: Kill off meta_ui_accelerator_name 
It's unused.
 2014-04-07 10:46:50 -04:00
Jasper St. Pierre
b9e9595e8b errors: Kill off meta_error_trap_push_with_return 
It isn't special; it's just an alias for meta_error_trap_push.
 2014-04-07 10:37:03 -04:00
Jasper St. Pierre
75de29f5f7 errors: Remove vestigals of old error trap implementation 2014-04-07 10:37:03 -04:00
Jasper St. Pierre
e2b24092d6 events: Don't pass any X input events on to Clutter / GTK+ 2014-04-07 10:37:02 -04:00
Jasper St. Pierre
0e6570b09b events: Early exit when we get a SN notification event 
Nothing else needs to see this.
 2014-04-07 10:37:02 -04:00
Jasper St. Pierre
840378ae68 xprop: Don't use GDK for reading text properties 2014-04-07 10:37:02 -04:00
Jasper St. Pierre
4752776ebf ui: Don't add our filter function twice 2014-04-06 15:19:04 -04:00
Jasper St. Pierre
c40868b239 xwayland: Fix rendering 
Since we get the ClientMessage after the surface is created, there's
no good way to synchronize the two streams. In this case, what we
need to do is delay the surface commit until after we get the
ClientMessage. Ideally, we'd be using a better surface system overall
where committing the surface didn't depend on what type it is, but
oh well, this is a good short-term hack for now.
 2014-04-02 13:24:58 -04:00
Jasper St. Pierre
a21e7a2188 wayland: Move surface_set_buffer back into the commits 
For XWayland support, we need to delay the buffer set until after
we do the typechecking, as we need to bail out early in that case.
 2014-04-02 13:24:58 -04:00
Jasper St. Pierre
371fba6843 wayland: Move the commit implementation to the top 
We're going to need to expose commit as a public method for XWayland
support, so decouple it from the handler implementation.
 2014-04-02 13:24:57 -04:00
Jasper St. Pierre
be02fa1120 xwayland: Switch to the new Xwayland DDX 2014-04-02 13:24:57 -04:00
Jasper St. Pierre
43730f1660 xwayland: Switch to SIGUSR1 to know when the X server has finished init 
This is effectively the same, but since we lose the xserver.xml protocol
in the new XWayland DDX, we have to use SIGUSR1 anyway, so might as well
switch over now.
 2014-04-02 13:16:10 -04:00
Jasper St. Pierre
4f609dbf5e xwayland: Don't use glib after forking 
glib doesn't have any guarantee about working after forking.
We can get away with it, but we're better off just not using it.
 2014-04-02 13:04:31 -04:00
Jasper St. Pierre
2a7d12ba14 xwayland: Make failing to exec a fatal error 2014-04-02 13:03:29 -04:00
Jasper St. Pierre
c4c0b5f0ab xwayland: Detect a fail to fork 2014-04-02 13:03:17 -04:00
Jasper St. Pierre
8373c90cd8 background: Remove load_still_frame 
Nothing uses it, and it's incompatible with XWayland anyway.
 2014-04-02 12:35:24 -04:00
Jasper St. Pierre
eb5b54dd8b xwayland: Split another part of the initialization sequence out 
This will be used from a SIGUSR1 handler.
 2014-04-02 11:41:28 -04:00
Jasper St. Pierre
9653b79a35 xwayland: Split a helper out 
This will make the next commit, which ports to the new ClientMessage
API, more understandable.
 2014-04-02 11:41:28 -04:00
Jasper St. Pierre
e07bd15fc2 xwayland: Make file cosmetically modern 
Put a modeline, include "config.h", and shift around the include ordering
 2014-04-02 11:41:27 -04:00
Jasper St. Pierre
5cf0740b4e xwayland: Fork the X server ourselves 
gspawn just isn't us the fine-grained control we need for starting
processes and leaking file descriptors in.
 2014-04-02 11:41:27 -04:00
Jasper St. Pierre
c540ddf59b xwayland: Move display_name into choose_xdisplay 2014-04-02 11:41:27 -04:00
Jasper St. Pierre
a44295599c xwayland: Split out the code that creates the XWayland sockets 2014-04-02 11:41:26 -04:00