We can land inside meta_window_focus() in the middle of changing the
window workspace, because some signal handler of MetaWorkspace's
"window-removed" signal triggers a focus. This can cause a crash in
`g_assert (link)` when updating the MRU list because we still think
we're on the old workspace when actually we are already removed from
this workspaces MRU list.
To avoid crashes like this, bail out of meta_window_focus() when we're
in the middle of a workspace change.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5368
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2691>
Currently, we will notify the display about a new window being created
during the constructed phase of the GObject. During this time,
property-change notifications are frozen by GObject, so we'll emit a few
::notify signals only after the window-created signal, although
the actual property change happened before that.
This caused confusion in gnome-shell code where a notify::skip-taskbar =
true emission was seen when the property already was true inside a
window-created handler before.
In order to fix that that, we notify the window creation
post-construction
of the GObject on GInitable.init vfunc
Details
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6119#note_1598983
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6119
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2703>
With high frequency mouse devices, we would send very many configure
events per each update cycle, which had the end result that some clients
constantly re-allocating and redrawing their buffers far too often, if
they did this in direct response to xdg_toplevel configure events.
Lets throttle the interactive resize updates to stage updates, to avoid
having these clients doing the excessive buffer reallocation.
This also removes some old legacy X11 client resize throttling, that
throttled a bit arbitrarily on 25 resizes a second; it is probably
enough to throttle on stage updates for these clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2652>
There were some magic conditions that decided when
meta_window_constrain() was to be called or not. Reasoning about and
changing these conditions were complicated, and in practice the caller
knows when constraining should be done. Lets change things by adding a
'constrain' flag to the move-resize flags that makes this clearer. This
way we can, if needed, have better control of when a window is
constrained or not without leaking that logic into the generic
to-constrain-or-not expression.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
We want to use the workspace MRU list to decide the default focus but
Globally Active Input clients don't call
meta_window_set_focused_internal and therefore don't update the MRU
list. Move the update to meta_window_focus instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2489>
When moving to another monitor the window size may change in some
cases. While unconditionally notifying a size change is not always
correct, it animates the window when moved to another monitor in
GNOME Shell.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2558>
The function finds a suitable logical monitor given the window
rectangle; this wasn't all that clear from the name
"calculate_main_logical_monitor".
This is in preparation for finding a new logical monitor using things
other than the geometry of the window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
Since b443bd42ac, we unmanage a wayland window when clearing its
transient parent. That's to make sure that xdg-foreign doesn't
leave the dialog around after the imported surface was destroyed.
While that behavior is sound, it is problematic to implement it
by unmanaging the window, as that happens entirely behind the
client's back.
Instead, send a close event for the window. Unless the client has
good reasons, it should honor the request. (And if it has good
reasons - like unsaved work - then effectively hiding the window
from both the user and client is probably not the best idea anyway).
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5458
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2499>
Not all windows can be minimized: X11 clients can disable the
functionality, and so do we for windows that aren't shown in
the alt-tab popup or the shell overview, so there would be no
way of getting them back.
While we make sure that we respect that ourselves (keybinding,
window menu, etc.), we don't guard meta_window_minimize(), so
clients or extensions can still minimize a window that isn't
supposed to be minimized.
That can lead to all kinds of issues, from the hidden window
being lost (as far as users are concerned) to a crash when
the minimzed window has a transient parent.
Just add an explicit check to make sure the unexpected doesn't
happen after all, and print a warning if it does.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2491>
Currently the signal is getting emitted accidentally, because even when
removing a window from the queue, the later handler of that queue will
still get run due to a bug. This bug is going to get fixed in the next
commit, but some things might depend on the signal getting emitted when
the visibility of a window has changed.
This change affects the behavior in two ways. First the signal is now
emitted immediately rather than from an idle. And second it now
correctly includes the window in the should_show or should_hide list.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2414>
For wayland meta_window_move_to_monitor sends a configure to the client
without actually moving the window, yet and the
meta_display_queue_check_fullscreen call won't detect any changes.
Checking for fullscreen in meta_window_update_monitor fixes the problem
because it is called whenever the window actually changed the monitor it
is on.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2325>
We'd guess the initial monitor before it was actually calculated by
looking at the initial geometry. For Wayland windows, this geometry was
always 0x0+0+0, thus the selected monitor was always the primary one.
This is problematic if we want to provide initial more likely
configurations to Wayland clients. While we're not doing that yet, it'll
be added later, and this is in preparation for that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2167>
This will later be used to tell Wayland clients about a size they
shouldn't exceed.
If the window doesn't have a main monitor, this function does nothing
and returns FALSE.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2167>
meta_window_(un)queue() was implemented with global arrays in window.c
that managed MetaLater handle IDs and lists of window queues. In order
to rely less on scattered static variables and making it clearer that
we're dealing with per display window management and not something
specific to a single window, move the window resize/calc-showing queue
management to MetaDisplay.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2264>
It's still used by e.g. GNOME Shell to produce fallback icons for X11
applications that doesn't come with a .desktop file. Geometry stays in
the generic class because it's used for minimize animations and is
configured by the panel (e.g. the one in gnome-shell-extensions).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2264>
The comments in this function tells a story of C programmer self
reflecting about data types and Perl. While that can be nice, the rest
consisted mostly of repeating what the code line below did, with the end
result being that the function didn't fit on screen, resulting in worse
readability overall.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2264>
We save the window rect before going fullscreen to a dedicated variable,
so we can go back to the correct dimension. We also have a dedicated
variable for returning from other window states, e.g. maximized, and
this one we initialized when creating the MetaWindow. This meant that we
could always rely on this being up to date on X11 windows that were
mapped maximized or fullscreen.
What the commit that introduced the saved rect dedicated for going
unfullscreen missed was to initialize the new saved rectangle too when
creating the MetaWindow. This resulted in windows mapped as fullscreen
often ending up misbehaving when unfullscreening, as mutter would tell
them to unfullscreen to 0x0.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1786
Fixes: a51ad8f932
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2210>
Change some things in these "app is alive" checks:
- The dialog timeout is separated from the ping timeout, in order
to show it again at a constant rate after dismissing, despite in
flight pings. It still shows immediately after the first failed
ping.
- As we want to tap further into is-alive logic, MetaWindow now
made it a property, that other places in code can fetch and
subscribe.
- Motion events trigger ping (as long as there was none other in
flight for the same window), and are counted between ping and
pong, in order to preemptively declare the window as not alive
before there is trouble with event queues being overflown.
This results in a separate logic between "the application does
not respond" and "we are showing the close dialog" so that the
former may get triggered independently.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2122>
Currently the stored unconstrained_rect is only ever updated if there
was a move, resize or state change according to the move_resize_internal
implementation. For Wayland windows however resizes or state changes
are done in two steps, first the new configuration is sent to the client
and then once client acknowledges it, it is set on the mutter side in
another move_resize_internal call. Only the second call would result in
the unconstrained_rect being updated.
This started causing problems when unfullscreening windows was
immediately followed by a strut change. These strut changes started
happening in gnome-shell due to the visibility of the panel now being
considered for the struts and the presence of a fullscreen causing it to
be hidden until unfullscreen. In this situation first the unfullscreen
would resize the window to its pre-fullscreen size as expected, but then
the strut change triggers another window resize. This window resize is
based on the stored unconstrained_rect, which is still at the fullscreen
size because the unfullscreen resize only has sent its configuration,
but it has not been acknowledged yet. As a result the strut change
causes a resize to the fullscreen size which due to the constraints now
looks like a maximized window.
To fix this always update the unconstrained_rect when the requested size
has changed, but not when a previous request has been acknowledged
unless it is originating from the client itself.
If this included the move_resize_internal call from acknowledging the
size as well, it would be possible for this to be delayed long enough on
the client side to overwrite an intermediate resize originating from
mutter. And if this did not include resizes originating from the client,
clients would not be able to set an initial window size.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1973
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2066>
If the ancestor a window is transient for has already been unmanaged
when the window is activated via meta_window_activate_full while its
transient_for property still points to that ancestor, this will cause
the already unmanaged ancestor to get added to the windows workspace.
This is after the ancestor had its workspace set to NULL when it was
unmanaged, causing this to look like an actual workspace change. Once
the window has been added to the workspace, it will never be removed
again, because the it has already been unmanaged. This confuses things
like the shell window tracker and leads to phantom windows being
considered present for apps that are not even running anymore.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4184
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2003>
Currently the only way to get cgroup for a MetaWindow is to get it's
PID and perform a bunch of file accesses and string manipulations.
This is especially not feasible if we want to get the cgroup every
time a MetaWindow has gained or lost focus.
A solution to this is to cache the GFile for a cgroup path.
The creation and access of this GFile is handled by
`meta_window_get_unit_cgroup` function.
`meta_window_unit_cgroup_equal` is a utility function which allows
us to compare whether two MetaWindows belong to the same cgroup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1960>
Makes workspace transitions in gnome-shell look more seamless, since
both outgoing and incoming workspace have focused windows.
This is only done for click focus mode, since it's not known which
window would be focused for the other modes.
Track the state and recompute it when it changes, to avoid redrawing
the windows needlessly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/850>
Handle the case of a TOUCH_BEGIN event during window dragging separately
instead of treating it like a TOUCH_UPDATE event: Simply return TRUE to
make Clutter stop event propagation if it's the pointer emulating
sequence and let Clutter propagate the event if it isn't.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/427>
Window dragging should be cancelled when the touch sequences we're using
are no longer available. Also listen to TOUCH_CANCEL events if the
window is grabbed and cancel the grab op when a TOUCH_CANCEL event
happens.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/427>
X11 clients can use different models of input handling, of which some
may not result focus being set synchronously.
For such clients, meta_focus_window() will not change the focus itself
but rely on the client itself to set the input focus on the desired
window.
Add a new MetaWindow API to check when dealing with such a window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1716>
Since commit c255031b6d we pass scroll-events through to
the compositor if the window_grab_modifiers are pressed;
in order to allow gnome-shell to check for those events,
expose the struct member as a MetaDisplay property.
Also take the opportunity to pick a more generic name, now
that the modifier is no longer used exclusively for mouse
clicks (unless we maintain the notion of scroll events as
button 4 and 5 "clicks").
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1695>
We remove pending pings when unmanaging a window, but currently
don't prevent new pings to be scheduled after that.
The previous commit fixed a code path where this did indeed happen,
but as the result of gnome-shell trying to attach a Clutter actor
to a non-existent window actor is pretty bad, also guard can_ping()
against being called for an unmanaging window.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2467
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1676>
As planned and prepared with the last commits, let ClutterStage take
care of tracking input devices and their respective actors. This means
we now can remove the old infrastructure for this from
ClutterInputDevice.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1633>
