If an atlas texture's last reference is held by the journal or by the
last flushed pipeline then if an atlas migration is started it can
cause a crash. This is because the atlas migration will cause a
journal flush and can sometimes change the current pipeline which
means that the texture would be destroyed during migration.
This patch adds an extra 'post_reorganize' callback to the existing
'reorganize' callback (which is now renamed to 'pre_reorganize'). The
pre_reorganize callback is now called before the atlas grabs a list of
the current textures instead of after so that it doesn't matter if the
journal flush destroys some of those textures. The pre_reorganize
callback for CoglAtlasTexture grabs a reference to all of the textures
so that they can not be destroyed when the migration changes the
pipeline. In the post_reorganize callback the reference is removed
again.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2538
In _clutter_actor_queue_redraw_with_clip it has a local variable to
mark when a new paint volume for the clip is created so that it can be
freed when the function returns. However the actual code to free the
paint volume went missing in 3b789490d2 so the variable did
nothing. This patch just adds the free back in.
When Cogl debugging is disabled then the 'waste' variable is not used
so it throws a compiler warning. This patch removes the variable and
the value is calculated directly as the parameter to COGL_NOTE.
Some code was doing pointer arithmetic on the return value from
cogl_buffer_map which is void* pointer. This is a GCC extension so we
should try to avoid it. This patch adds casts to guint8* where
appropriate.
Based on a patch by Fan, Chun-wei.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2561
GCC by default allows pointer arithmetic on void* pointers and treats
them as having a size of 1 byte. This is non-standard behaviour and
causes errors on some compilers so we should try to avoid
it. -Wpointer-arith warns about these cases.
About other assorted boneheadedness, the GType for GParamSpec is
called 'GParam'. Why? Who knows. I assume alcohol was involved,
but I honestly don't want to know.
This removes the last g-ir-scanner warning in Clutter.
This time, in Clutter core.
The ObjC standard library provides a type called 'id', which obviously
requires any library to either drop the useful shadowed variable warning
or stop using 'id' as a variable name.
Yes, it's almost unbearably stupid. Well, at least it's not 'index' in
string.h, or 'y2' in math.h.
Instead of directly banging GL to migrate textures the atlas now uses
the CoglFramebuffer API. It will use one of four approaches; it can
set up two FBOs and use _cogl_blit_framebuffer to copy between them;
it can use a single target fbo and then render the source texture to
the FBO using a Cogl draw call; it can use a single FBO and call
glCopyTexSubImage2D; or it can fallback to reading all of the texture
data back to system memory and uploading it again with a sub texture
update.
Previously GL calls were used directly because Cogl wasn't able to
create a framebuffer without a stencil and depth buffer. However there
is now an internal version of cogl_offscreen_new_to_texture which
takes a set of flags to disable the two buffers.
The code for blitting has now been moved into a separate file called
cogl-blit.c because it has become quite long and it may be useful
outside of the atlas at some point.
The 4 different methods have a fixed order of preference which is:
* Texture render between two FBOs
* glBlitFramebuffer
* glCopyTexSubImage2D
* glGetTexImage + glTexSubImage2D
Once a method is succesfully used it is tried first for all subsequent
blits. The default default can be overridden by setting the
environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the
following values:
* texture-render
* framebuffer
* copy-tex-sub-image
* get-tex-data
This adds a declaration for _cogl_is_texture_2d to the private header
so that it can be used in cogl-blit.c to determine if the target
texture is a simple 2D texture.
This adds a function called _cogl_texture_2d_copy_from_framebuffer
which is a simple wrapper around glCopyTexSubImage2D. It is currently
specific to the texture 2D backend.
This adds the _cogl_blit_framebuffer internal function which is a
wrapper around glBlitFramebuffer. The API is changed from the GL
version of the function to reflect the limitations provided by the
GL_ANGLE_framebuffer_blit extension (eg, no scaling or mirroring).
This extension is the GLES equivalent of the GL_EXT_framebuffer_blit
extension except that it has some extra restrictions. We need to check
for some extension that provides glBlitFramebuffer so that we can
unconditionally use ctx->drv.pf_glBlitFramebuffer in both GL and GLES
code. Even with the restrictions, the extension provides enough
features for what Cogl needs.
Previously when _cogl_atlas_texture_migrate_out_of_atlas is called it
would unreference the atlas texture's sub-texture before calling
_cogl_atlas_copy_rectangle. This would leave the atlas texture in an
inconsistent state during the copy. This doesn't normally matter but
if the copy ends up doing a render then the atlas texture may end up
being referenced. In particular it would cause problems if the texture
is left in a texture unit because then Cogl may try to call
get_gl_texture even though the texture isn't actually being used for
rendering. To fix this the sub texture is now unrefed after the copy
call instead.
The current framebuffer is now internally separated so that there can
be a different draw and read buffer. This is required to use the
GL_EXT_framebuffer_blit extension. The current draw and read buffers
are stored as a pair in a single stack so that pushing the draw and
read buffer is done simultaneously with the new
_cogl_push_framebuffers internal function. Calling
cogl_pop_framebuffer will restore both the draw and read buffer to the
previous state. The public cogl_push_framebuffer function is layered
on top of the new function so that it just pushes the same buffer for
both drawing and reading.
When flushing the framebuffer state, the cogl_framebuffer_flush_state
function now tackes a pointer to both the draw and the read
buffer. Anywhere that was just flushing the state for the current
framebuffer with _cogl_get_framebuffer now needs to call both
_cogl_get_draw_buffer and _cogl_get_read_buffer.
As noted in commit ce3f55292a an explict glFlush is needed for
both glBlitFramebuffer and glXCopySubBuffer.
_clutter_backend_glx_blit_sub_buffer was already doing an explicit
flush when using glBlitFramebuffer, so just do it unconditonally
and remove the call from clutter_stage_glx_redraw.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2558
Since we realize on creation we need to unrealize on destruction. This
makes sure that the ClutterStageWindow implementation can tear down any
resource set up during the realization phase.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2559
* nobled/wayland-fixes2:
wayland: fix shm buffers
wayland: set renderable type on dummy surface
wayland: check for egl extensions explicitly
wayland: fall back to shm buffers if drm fails
wayland: add shm buffer code
wayland: make buffer handling generic
wayland: really fix buffer format selection
wayland: fix pixel format
wayland: clean up buffer creation code
wayland: don't require the surfaceless extensions
wayland: check for API-specific surfaceless extension
wayland: fix GLES context creation
wayland: use EGL_NO_SURFACE
wayland: update to new api
wayland: fix connecting to default socket
fix ClutterContainer docs
The 'in_clone_paint' parameter of the private function
_clutter_actor_set_in_clone_paint() shadowed the private function
in_clone_paint(). Rename this parameter to 'is_in_clone_paint' to remove
a compiler warning.
If an actor was partially off of the stage, it would be clipped because
of the stage viewport. This produces problems if you use an offscreen
effect that relies on the entire actor being rendered (e.g. shadows).
Expand the viewport in this scenario so that the offscreen-rendering isn't
clipped.
This fixes http://bugzilla.clutter-project.org/show_bug.cgi?id=2550
Replace the opacity_parent with an opacity_override variable, to allow
direct overriding of the paint opacity and simplify this mechanism
somewhat.
This also required a new private flag, in_clone_paint, to maintain the
functionality of the public function clutter_actor_is_in_clone_paint()
We use the micro version for distinguishing released tarballs and Git
builds; the maintainer compiler flags should be enabled for the latter,
and not just for unstable cycles, since it makes sense to have extra
warning flags even on stable cycles.
We also want to allow people to turn on -Werror on demand, so let's add
a third option to --enable-maintainer-flags.
When pushing a framebuffer it would previously push
COGL_INVALID_HANDLE to the top of the framebuffer stack so that when
it later calls cogl_set_framebuffer it will recognise that the
framebuffer is different and replace the top with the new
pointer. This isn't ideal because it breaks the code to flush the
journal because _cogl_framebuffer_flush_journal is called with the
value of the old pointer which is NULL. That function was checking for
a NULL pointer so it wouldn't actually flush. It also would mean that
if you pushed the same framebuffer twice we would end up dirtying
state unnecessarily. To fix this cogl_push_framebuffer now pushes a
reference to the current framebuffer instead.
After a dependent framebuffer is added to a framebuffer it was never
getting removed. Once the journal for a framebuffer is flushed we no
longer depend on any framebuffers so the list should be cleared. This
was causing leaks of offscreens and textures.
Unlike glXSwapBuffers, glXCopySubBuffer and glBlitFramebuffer don't
issue an implicit glFlush() so we have to flush ourselves if we want the
request to complete in finite amount of time since otherwise the driver
can batch the command indefinitely.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2551
This adds a note to clarify that cogl_matrix_multiply allows you to
multiply the @a matrix in-place, so @a can equal @result but @b can't
equal @result.
