This is added as a hint so that the caller can optionally use it, e.g.
in the case that a window drag is driven by the mouse. This will be used
to more accurately follow the drag position, other than starting at the
current pointer position.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3546>
Pointer constraints obey to logical pointer focus changes, and looking
up the current surface in order to maybe enable them is getting ahead
of itself, since the pointer focus might differ from the current surface
due to other factors (e.g. grabs).
Change the code checking whether constraints should be enabled to again
check the pointer logical focus, this will be influenced by the
MetaWaylandEventInterface mechanism, and correctly reflect the logical
state accounting for those factors.
Fixes: 125ba92169 ("wayland: Port pointer constraints to using MetaWaylandEventInterface")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3303
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3618>
Currently, we don't handle too well the removal of a MetaWaylandEventInterface
during meta_wayland_event_interface_invalidate_all_focus(), since the
MetaWaylandEventInterface may be freed at an intermediate point in that function
while handling the focus change for all input devices.
Turn this invalidate_all_focus() function into a MetaWaylandInput method, and
always ensure to use the currently effective MetaWaylandEventInterface when
resetting the focus for each device.
This fixes the situation through handling reentrancy naturally, a focus
sync (say, triggered by a grab) would reset a device focus (say, pointer), which
would remove an event interface (say, a pointer constraint), which would
invalidate_all_focus() again underneath using the new effective
MetaWaylandEventInterface. When that is done, the initial invalidate_all_focus()
call would re-apply the same focus to the same currently effective
MetaWaylandEventInterface, resulting in a no-op for the remainder of the function.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3618>
Even though the logical focus is typically business that only the
MetaWaylandEventInterface mechanism minds about, there are some pointer
subsystems that want to look this up, as opposed to the current surface.
Add a getter to make this easier, without struct peeking.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3618>
This also removes some g_return_if_fail's because the test suite expects
to be able to create arbitrary KmsUpdates even if they don't make sense
for the real state. We just get lucky that the test suite isn't
constructing updates with color space and hdr changes, yet.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3552>
Currently querying support for some output features is done partially
through the OutputInfo and partially via KMS CRTC and Connector objects.
Let's be consistent and use OutputInfo always which works with all
backends and backend types.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3552>
We're currently pretending the gamma LUT has another size. This becomes
a problem when we try to reset the LUT to passthrough, create an
identity LUT for it and it has a size that the kernel doesn't accept.
We do track the size and have utility for creating the LUTs, so let's
just use them.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3552>
The kernel doesn't let us set gamma to passthrough with the legacy API
so we have to trick a bit and create an identity LUT, and also when we
read the KMS state, detect when an identity LUT is active.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3552>
The frame size_allocate() will set it correctly once show() is called by
the window tracker.
This is less code and also help reduces the chance of a brief visual
glitch in fullscreen games during startup. If the window is initially
still decorated the gray area would still show up until the next redraw,
which due to loading times can take a while.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3608>
Relying on the content size_allocate() to determine the content position
can fail in situations where the position of the content has changed,
but not its size.
This happens for example when the window initially is sized fullscreen
height + headerbar height while not considered fullscreen yet. Then when
the window is resized to just the fullscreen height and marked as
fullscreen, the content size has not changed and size_allocate() is not
called on the content. Thus the previous position which assumes the
presence of a headerbar still applies. As a result the window is shifted
down, revealing a headerbar sized area showing the gtk window background
color.
This issue can be avoided by using the frame's size_allocate(), which
gets called in response to all relevant events, such as any headerbar
size changes, headerbar visibility changes, window resizes and
fullscreen status changes.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2937
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3608>
Allows to mark a wayland client window as a DOCK window. The reason for
this is that in Gala (elementary OS's window manager) we would like to
continue using GTK apps as panel and dock on wayland.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3612>
Assigning the corresponding stack layer of DOCK windows is currently X11
specific, because there is no way for wayland clients to set the DOCK
window type. This is about to change, so move the code to the generic
layer handling.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3612>
adaita-icon-theme cleaned up its cursor set, and now only provides
names defined by GTK/CSS. Update the cursor-hotplug test to not
use legacy cursor that will fail with a recent cursor theme.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3613>
meta_window_update_monitor() can emit "::highest-scale-monitor-changed",
and we connected to that signal right before. Let's avoid calling
meta_wayland_surface_notify_highest_scale_monitor() twice and move the
g_signal_connect() for that signal and the initial call to
meta_wayland_surface_notify_highest_scale_monitor() to happen after
meta_window_update_monitor().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3598>
Turns out there is a better solution: Almost always, MetaWindow already has
an idea on which monitor it will be, even if it isn't positioned yet. Since
the last commit we're now using that monitor for setting the
highest-output-scale of the window, so this fallback is no longer necessary.
While we could keep this fallback around and also return a valid scale in
case the surface is not even mapped yet, this means we report fractional
scale twice for new surfaces: Once from
wp_fractional_scale_manager::get_fractional_scale() (here we'll enter the
fallback), and a second time (this time with correct scale) right after
creating the MetaWindow.
Note that wp_fractional_scale_v1 doesn't specify that a preferred_scale
event must be sent immediately after
wp_fractional_scale_manager::get_fractional_scale(), so we can safely remove
the fallback.
This reverts commit 8cfbdb4313.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3598>
MetaWindow always tries to have a main monitor: If the frame rect is empty
and the window has not been positioned, in meta_window_constructed() we fall
back to asking the backend for the current monitor, and in
meta_window_wayland_update_main_monitor() we fall back to
meta_window_find_monitor_from_id(), which then falls back to the primary
monitor.
In general this means that window->monitor is always set as long as there is
a monitor around.
For getting the highest-scale-monitor the window is on, we currently rely
completely on the frame rect. If the frame rect is empty, we set the
highest-scale-monitor to NULL. Since we usually know though which monitor
the window is, or will be on, and window->monitor is even set to that, we
can just fall back to window->monitor for the highest-scale-monitor.
This makes sure ::highest-scale-monitor-changed is emitted right after the
window is created, and it's set to the correct monitor that the window will
be on. This in turn means that we can send a correct wp_fractional_scale
fraction_scale event to clients right away.
https://gitlab.gnome.org/GNOME/mutter/-/issues/3262
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3598>
The existing comment tells us this is necessary:
> there may be drawing between the last damage event and the
> XDamageSubtract() that needs to be flushed as well.
But the commit message for 551101c65c also tells us that
synchronization is necessary before-update. Assuming both are correct
then it needs to be done in both places.
I did try optimizing out the second sync to only do it if damage
arrived during the update, but that doesn't seem to be the issue.
The damage event is arriving before the update starts and it's some
secondary changes within the damage region running late that need
flushing. So this means the client is reporting damage more frequently
than the frame rate and we're ignoring the secondary damage reports
for efficiency (XDamageReportBoundingBox), which is still a good thing.
Fixes: 551101c65c ("compositor-x11: Move synchronization to before-update")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2880
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3590>
Do not include it at header side as it is not part of the installed headers.
Only keep it in cogl-gl-headers.h as it is a private header.
Add it to all the source files that depend on it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3593>
This change adds modifier-aware screencasting support to Mutter.
Implicit modifier support is kept for backward compatibility and the
code fallbacks to implicit modifiers in case any new functionality added
for explicit modifier support fails.
The advertised modifiers are retrieved by a call to
eglQueryDmaBufModifiersEXT() function. The "external only" modifiers are
excluded as Mutter uses the buffers created with the explicit modifiers
as renderbuffers. Support for implicit modifiers is checked with a test
allocation since there are drivers that do not support them.
This change also removes various implicit modifier support checks that
disable DMA-BUF screen casting support globally as they are no longer
needed. DMA-BUF support for screencasting is determined by the available
formats and modifiers case-by-case now.
It also effectively enables DMA-BUF screencasting on NVIDIA hardware as
well since GBM buffer objects with linear modifiers are no longer used
by default to create a renderbuffer object for screencasting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3537>
meta_render_device_gbm_allocate_dma_buf() function is updated to take a
list of modifiers. If no modifiers are specified, the modifier is
selected by the allocator, and implicit modifiers are used to import the
created DMA-BUF.
Co-authored-by: Jonas Ådahl <jadahl@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3537>
Currently, we blindly apply the transformation matrices of all parent
actors when calculating the absolute coordinates. This means if this
function is called while the window actor containing the surface is in
the middle of a transition (e.g. window open animation), it may return
incorrect values. As this function is used for calculating pointer
confinement bounds for a specific surface, this will result in incorrect
bounds value being used if pointer constraints are applied by the
application at the same time the window is created and the mouse is
inside the surface's bounds when it's created.
Fix this by only applying transformation matrices up to the window actor
of the surface and then calculating the absolute coordinates by adding
the position of the window actor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3585>
They are float in libdisplay-info and our own EDID parsing also returns
a float but when then converted both to an integer. Especially the min
luminance can be <1.
We also don't need a variable for indicating presence of a CTA Static
Metadata block. The values are all zero if it is absent.
Found by Dor Askayo.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3574>
The function was used only once so just move it content where it is
called. It allows us to drop more cairo paths from the API surface even
if it is not part of a public api
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3581>
If we don't have a monitor for a surface - e.g. because the surface is
not mapped yet - return the highest scale of all outputs. This makes us
send a preferred scale before a client draws its first frame. The highest
scale is always correct in single monitor cases and arguably a good
option otherwise as scaling down usually looks better than scaling up.
Note that this is currently only used by the fractional scale protocol,
but will also be used for the core `send_preferred_scale()` once we
implement it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3217>
With all early "goto out" paths bypassing wayland, we can pretty
much avoid the goto and use early returns in this function. This
will hopefully improve readability.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
We've so far returned FALSE (i.e. PROPAGATE) here, somehow
oblivious of the fact that the core event handler would stop
all non-gesture events directed to windows.
Incorporate this knowledge there, in order to be able to
streamline this piece of event handling in core/ code.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
This is Wayland specific code, handle it directly in MetaWaylandPointer.
This also fixes issues with the crossing event itself managing to reach
the window occluded by modals.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
With Wayland popups and drag-and-drop using grabs, we
should let window cursors prevail when there is one
in effect.
Also, resort always to the actor as known by the
stage. This fixes the cursor lookup right after crossing
events induced by grabs, e.g. right clicking on the
gtk4-demo textview without motion would keep the I-beam
cursor, now results on the right actor/cursor for the
menu being picked.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
Enable grabbing input for popups, and drag-and-drop. Since the very
switch to using ClutterGrab underneath Wayland grabs will challenge
assumptions in existing code, these had to change in one go. A notable
one is that meta_display_windows_are_interactable() is not 100% true
anymore for xdg_popups, at least not the same.
Another change happening in lockstep is MetaDnD no longer having
to funnel events to Wayland, since the grab triggered by Wayland DnD
is now a cause of "compositor grabs", and will naturally receive events
as long as it hold. while "modal".
A number of ad-hoc checks for grabbing state has also been dropped
from src/wayland/ internals, since again Wayland grabs are a reason
for Clutter grabs, plus the mechanism itself will already take care
of focus loss and restoration.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
Add the mechanism to integrate MetaWaylandEventInterface with grabs,
callers may now specify whether a grab is required, in which case
one is created, shared by all the event interface stack.
ClutterStage grab state is also tracked, so the MetaWaylandEventInterface
in charge will focus or unfocus depending on whether input should be
handled (if ungrabbed, or grabbed by the MetaWaylandInput itself), or
not (if grabbed by something else).
At the moment nothing uses this mechanism yet, later commits will add
the first users.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
Now that the backend handles 0-size regions naturally and MetaWaylandPointer
avoids sending wl_pointer.motion on unchanged coordinates, we can use the
default motion handler for the locked pointer constraint.
And since that is the only difference with the pointer constraint event
interface, we can unify them both into a single MetaWaylandEventInterface
handling focus for them both.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
The small catch is that MtkRegion (and pixman regions) "optimize away"
0-size rectangles, so a 0-sized region will always be seen as having
a 0,0 origin. We don't want that, so transfer the origin separately from
the region.
While at it, make the Wayland pointer lock use one such 0-size region,
to avoid the 1x1px wiggle room that it currently has (accounting for subpixel
motion).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
While every kind of input is seen as coming from the Virtual
Core Pointer in the X11 case, we can largely abstract away from
that fact, and lock XDnD pointer input to the most plausible
source (e.g. a device with a pressed button), instead of only
working with pointer input.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
This collection of event handlers is the most special of them all, as
they want to unset any pointer/touch/stylus/keyboard/pad/etc focus,
and handle events from a selected device/sequence combination through
the MetaWaylandDragDest interfaces.
The same interfaces also replace the MetaWaylandKeyboardGrabInterface
in effect that handled DnD action changes.
On the XDnD special grab side, we mainly need to let the current
client (i.e. the drag source) keep receiving input events, as they
drive the DnD operation from the X11 realm.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
This is again a grab interface that mostly wants to meddle with focus,
logically setting a NULL surface if the surface client does not match
the popup client.
Since popups are meant to naturally work with any input device, the
code has been refactored to not involve the MetaWaylandPointer directly
in MetaWaylandPopup creation or getting the top popup surface (memory
management was shuffled), or compressing multiple grabbing xdg_popups
together (the existing grab maintains a single MetaWaylandEventHandler
for all).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
Besides the pointer locking/constraining mechanism, these grab interfaces
were more of a focus tracking mechanism, revoking the constraints when
the conditions didn't meet.
This can be handled pretty similarly to keyboard grabs with the new
interface, with the added bonus that we can chain up to let the
parent/default handler handle the events themselves, without poking at
MetaWaylandPointer API.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
This is implemented at the MetaWaylandSeat level, and it governs
focus and event delivery for all devices, falling through each
of the MetaWaylandPointer/MetaWaylandKeyboard/etc components.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
MetaWaylandInput is an object that will become in charge of handling
input events on their way to the Wayland socket. It keeps a stack
of event handlers, and propagates events and changes across them in
order to have them emit Wayland events, or change focus.
Each of these event handlers has a MetaWaylandEventInterface, this
is a vtable meant to replace MetaWaylandPointerGrabInterface and
MetaWaylandKeyboardGrabInterface in an unified manner, with the
following methods:
- get_focus_surface: to return the focus surface for a device/sequence.
Since several handlers will want to delegate logic on previous
handlers, it is optional to chain up with
meta_wayland_event_handler_chain_up_get_focus_surface().
- focus: To trigger a focus change for a device/sequence, since
event handlers are daisy chained by default, it is mandatory to
chain up with meta_wayland_event_handler_chain_up_focus(), either
with the given surface, or passing NULL to let later handlers
unset their state.
- press/motion/release: Unified handlers for pointer/touch/stylus
input, they chain up like event handlers do.
- key: Key event handler, propagates like event handlers do.
- other: Fallthrough for other events (pad, scroll, ...), propagates
like event handlers do.
Since there is a variety of expected behaviors, and the possibility
of stacking for some of the existing Wayland "grabs", this provides
the mechanism for that to happen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
That would be the surface under the tool that is being currently used
on the device. This will be used by MetaWaylandSeat to implement the
default MetaWaylandEventInterface.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
The MetaWaylandPointer used to put this together through
MetaCursorTracker cursor visibility, and ClutterSeat-level
inhibition API, applying the pointer focus changes due to
visibility logically to Wayland clients.
In order to make this work over all Clutter widgetry
instead of just Wayland clients, make the ClutterSeat-level
inhibition API control this feature at the ClutterStage picking
level, and leave/enter the seat pointer as appropriate.
By default, the seat pointer has (un)focus inhibited. The
MetaCursorTracker has been made another player in unfocus
inhibition, simply asking for the pointer to get its focus
while the cursor is visible.
This in practice means that picking code may return a NULL
actor, some asserts and preconditions had to be changed to
handle this, plus some test code slightly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
Do not jump at MetaWaylandSeat across the MetaWaylandTabletSeat to
poke at the tablet tools, and chain up the checks through a
MetaWaylandTabletSeat method instead.
While at it, use g_autoptr to manage the tool list, and fix a leak.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3420>
After negotiation of DMABUF transport mutter will silently allocate SHM
buffers if the allocation in the add_buffer callback fails. It's cleaner
to renegotiate the supported formats without announcing DMABUF
capabilities in this case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2557>
To fixate the format or renegotiate after a DMABUF allocation failed we
need to rebuild the EnumFormat params.
The function meta_screen_cast_query_modifiers will return false if no
modifiers are supported, thouse we can drop the check and remove the
macro guard.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2557>
This function contains a stub, which returns support for implicit
modifiers, if modifiers are supported preserving the current
capabilities. The stub has to be replaced with a query to the cogl
renderer to support explicit modifiers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2557>
This check was originally added because `window` was actually used.
While technically correct, there's no reason to keep it around.
Fixes: 4736f873f2 ("compositor/native: Add support for direct scanout per view")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177>
Until now we only supported direct scanout to the primary plane if the
buffer size perfectly matched the display size.
Since display controllers usually support scaling and cropping buffers
highly efficiently, try to let them do the job. This is usually helpful
if wp_viewporter is used by the client or Mutter uses fractional
scaling.
This has several advantages:
- Games (e.g. SDL2 based ones) can almost always hit direct scanout
paths in fullscreen mode. Notably when fractional scaling is used or
the game renders in a non-native resolution (or both).
- Video players using YUV buffer formats and wp_viewporter can easily
hit direct scanout paths, making displaying video very power
efficient as the 3D engine is not used at all.
Note that this still only uses the primary plane, no overlay or underlay
planes, making this change comparatively low risk.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177>
In a following commit we will start supporting scaled and croped
surfaces, thus, in preparation, update the logic to three common cases:
1. only one surface, fullscreen (most apps)
2. a content surface and a black background surface which the client
does not want to unmap, fullscreen
3. top-level subsurface covers the whole window and is opaque (Firefox)
The remaining currently supported cases should be fairly uncommen and
and harder to compute.
Note that we already check that the window cover the stage view in
MetaCompositorView.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177>
This allows us to pass on the related data from CoglScanouts.
If dst_rect does not match the mode, we assume that not covered areas
are opaque black - usually black bars around a centered surface.
While such driver behaviour does not appear to be documented (well) yet,
it seems to be followed by all known existing drivers and is used in a
similar way in ChromeOS.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177>
We need an object to hold additional scanout related information, such
as scaling and positioning data. Turn CoglScanout into such an object,
moving the interface into CoglScanoutBuffer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177>
Except meta_window_x11_get_group, which is still used by GNOME Shell
and we can't make it a private API for now.
Will need further investigation and could be done as a future
step
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3555>
The macro used to call into a bunch of other macros so let us turn it
into a single function.
This would simplify things for the next commit that puts the MetaGroup
usage behind a X11 ifdef
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3555>
If such a failure is followed by a successful frame then the Cogl frame
queue would have size 2, leading to an assertion failure in
`meta_onscreen_native_notify_frame_complete`:
```
g_assert (!cogl_onscreen_peek_head_frame_info (onscreen));
```
Notifying on the failure however keeps the Cogl frame queue limited to
a size of 1 and we recover gracefully with only a missed frame and a
warning message.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3278
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3565>
Popups were missing the "input focus" unification in the pointer
seat, triggering MetaWaylandKeyboard focus changes underneath. On
one hand this missed moving all associated focus with it, on the
other hand this made keyboard and global input focus get out of
sync, and bring funky behavior like keyboard focus loss after
dismissing popups.
Fixes: 7b232d9f65 ("wayland: Keep track of the "input focus" on MetaWaylandSeat")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3256
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3568>
In some circumstances, we may end up with outputs with the same
vendor/product/serial, in which case we have a hard time finding the
right one to map tablets to, since configuration only has these 3
pieces of data.
Add the handling of a 4th argument containing the output name
based on the connector (e.g. HDMI-1), so that it can be used to
disambiguate the output if necessary.
This only kicks in if there actually are multiple outputs with the
same EDID data. A goal of the configuration as it was stored was to
remain useful if the user changed how the device is physically
connected to the computer, this remains true for the vast majority
of users having a single thing of each.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3556>
Our hashtable stores tools by the serial but our stylus tool and eraser
tool share the same serial - they only differ by the tool type.
This results in only one tool being created and this tool re-used for
the other type tool. Fun side-effects of this are that the stylus ends
up using the eraser pressure curve (or vice versa).
Hack around this by bit-flipping the serial for the eraser to
make it distinct - this is the only place we need to wrorry .
Closes#1884
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3542>
For barrier validation, check_barrier() would start from the
(presumably) left-most monitor and walk the neighbor monitors to the
right.
This is assuming that there is always a monitor at (0.0), which is not
necessarily the case. If the first monitor on the left is not aligned at
the top, there is no logical monitor at (0.0) causing a NULL pointer
derefence.
Instead of starting from the monitor at (0,0), start from the primary
logical monitor, as there is necessarily one.
Fixes: 85885c6 - Check barriers don't extend into nonexisting monitors
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3272
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3562>
There doesn't seem to be a good reason to keep this code in
`MetaWaylandSurface`. Moving it to `MetaWaylandBuffer` cleans things
up and will allow us to tread buffers differently depending on their
type.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3559>
For secondary GPU rendering contexts we currently might choose an EGL
config with a format which is not supported on all primary planes. The
renderer is created when a GPU is detected and lighting up outputs and
thus assigning CRTC and primary planes can happen at any point after
that. This means we have to make sure that all possible plane
assignments will work with the rendering context when we create it.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3235
Fixes: cc7bca073 ("crtc/kms: Dynamically assign primary and cursor planes")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3512>
It can be used to force a specific RGB range. Some monitors don't follow
the specification and expect a signal different from what we send. This
property allows to force a mode which hopefully then works correctly for
the sink.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3535>
A ring will naturally go from 355 degrees to 5 degrees (or vice versa),
giving us the illusion of a direction change. Avoid this by assuming
that any change larger than 180 degrees is actually the equivalent
smaller change in the other direction.
Closes#1885
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3545>
BTN_STYLUS is the lower one and traditionally (read: in X) maps to
middle button (2), BTN_STYLUS2 is the upper one and traditionally maps
to right button (3).
This is also what GTK does and our desktop actions too map MIDDLE to
BTN_STYLUS and RIGHT to BTN_STYLUS2.
See also gtk!6168
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3541>
The code that maybe flushed IM state before processing a key event
became ineffective at commit 7716b62fa2, since the handle_event()
method on MetaWaylandTextInput won't handle key events, only IM
events and touch/button press events causing IM state to be
committed. Basically, the events that directly change the IM state.
Move this ineffective code to the the filter_event() method handling
the key presses in order to let the IM maybe filter them, and handle
them so that any key event that is let through (both key events
previously injected by the IM, and key events that the IM chooses to
ignore) will ensure that the pending IM state is flushed before the
key event is handled and emitted to the client.
This brings back lost guarantees of orderly event emission when IMs
alternate key events and IM actions.
Fixes: 7716b62fa2 ("clutter: Separate ClutterInputFocus event processing and filtering")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3090
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3536>
adwaita-icon-theme updated its cursor metaphors and changed all DnD
cursors to use arrows instead of hands, except for the grab related
ones. Mutter was using "grabbing" as default DnD cursor, which now
does not match the other DnD cursors ("copy" and "no-drop") anymore.
Change this to the "default" cursor.
Additionally, because the "no-drop" cursor now puts a stronger emphasis
on the crossed out symbol also prefer "default" for
META_CURSOR_DND_IN_DRAG and only use "no-drop" for things that
explicitly don't accept a drop.
Related: https://gitlab.gnome.org/GNOME/adwaita-icon-theme/-/merge_requests/63
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3532>
When Wayland clients send commits without a buffer attached ("empty"
commits), they may lead to stage updates that do not result in any
frame being submitted for presentation ("empty" updates).
Due to how frame scheduling is handled, there can be many such
"empty" updates in a single refresh cycle. If frame callbacks were
emitted after each of these "empty" updates, and if the client
sending "empty" commits was using frame callbacks to throttle the
same logic that results in these "empty" commits being sent, it would
result in a feedback loop between Mutter and the client where the
client would send "empty" commits and Mutter would reply almost
immediately with a frame callback causing the client to send "empty"
commits continuously.
As such, when an "empty" update is detected, frame callbacks are
scheduled to be emitted only once in every refresh cycle, avoiding the
feedback loop.
When a "non-empty" update is detected, frame callbacks are instead
emitted immediately to allow clients to draw their next frame as soon
as possible. It is safe to emit frame callbacks in this case because
the frame for the current refresh cycle is already "finalized" and
that any commit sent by the client at that point would only be handled
in a future refresh cycle.
To implement this, the previous logic had used
meta_frame_native_had_kms_update() to detect "non-empty" updates,
assuming that those would always result in a KMS presentation with the
native backend.
However, this approach misses the fact that virtual monitors do not
use KMS, and as such do not result in KMS presentation even for
"non-empty" updates. As a result, frame callbacks would not be emitted
immediately, resulting in unintended throttling of client rendering.
Instead, assume that it is safe to emit frame callbacks immediately
whenever an update results in the frame clock waiting to be notified
of presentation, since this is also when commits sent by clients are
scheduled to be handled in a future refresh cycle.
This issue was mostly hidden because frame callbacks would be sent
immediately when the target presentation time for the frame had
changed compared to the previous frame. However, this behavior was
removed in 26d8b9c69 ("wayland: Remove unnecessary dispatch of frame
callback source"), exposing the issue.
Fixes: a7a7933e0 ("wayland: Emit frame events in GSource after "empty" updates")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3263
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3549>
Calculate the frame deadline in ClutterFrameClock's
calculate_next_update_time_us() rather than in MetaWaylandCompositor's
on_after_update().
The specifics of the deadline calculation for a given frame should be
implementation detail of the frame clock and and remain internal to
allow extensibility.
This extensibility is specifically useful for scenarios where a
different deadline calculation is needed due to alternative frame
scheduling logic, such as for VRR.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
To avoid communicating lower frame rate to clients through frame
callbacks, it is important to avoid delaying the source dispatch when
a dispatch is already scheduled.
To that end, the previous logic would emit pending frame callbacks
immediately in case a source dispatch was still scheduled for the
previous refresh cycle and then (potentially) schedule another source
dispatch for the current refresh cycle.
However, emitting pending frame callbacks immediately would send
frame events for every pending frame callback, including for the
current "empty" update. Scheduling another source dispatch for the
current cycle was then unnecessary and potentially undesirable
because there may not even be another "empty" update during the cycle.
Instead, let the already-scheduled source dispatch handle emitting any
pending frame callbacks, and do not schedule an additional source
dispatch for the current cycle as it may not be needed.
This approach is useful because it removes an implicit assumption
that the refresh rate is fixed and that target presentation time
remains constant within a refresh cycle. This assumption does not
apply for VRR.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
The value of this variable represents the last point in time in
which an update would be allowed to scheduled for the given frame.
Rename it for clarity and in preparation for the next commits.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
The value returned from clutter_frame_get_target_presentation_time()
is always same as the value returned from
clutter_frame_get_min_render_time_allowed() when they are called
consecutively because both functions effectively return the value of
frame->has_target_presentation_time. This is with the assumption
that this variable is only ever modified by the same thread that
also executes on_after_update().
As such, a case where the former returns FALSE after the latter
returned TRUE is not possible, which means the line that sets
"target_presentation_time_us = 0;" is effectively unreachable.
Acknowledging this fact allows the call to
clutter_frame_get_target_presentation_time() to be moved outside the
"else" case and into the "if" condition itself. This is done in
preparation for the next commits.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3521>
In various public APIs, Clutter used to return a PangoDirection
while we have a text direction enum defined in Clutter.
This allows us to drop pango dependency from meta making it specific
to cogl-pango & clutter
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3531>
It adds the following clarification:
```
Starting from version 5, the invalid_format protocol error is sent if
all planes don't use the same modifier.
```
We already send an error, just the wrong one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3450>
Set the deadline timer state as "inhibited" in case a permission error
is returned while attempting to arm the deadline timer. This makes each
device enable its deadline timer again after a VT switch.
Also print a note in this case instead of a warning as such errors are
expected during a VT switch and should not raise concerns.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3259
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3534>
For now, this function only enables the deadline timer in case it was
inhibited. This would result in an attempt to use the deadline timer
again after a device is resumed.
If the conditions that resulted in the timer becoming inhibited
remain, it is expected to return to this state after the next frame
and before being armed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3534>
The "disabled" state indicates that the deadline timer is disabled
for the lifetime of the device, while the "inhibited" state indicates
that it is disabled temporarily for the device.
This distinction is needed to handle each state differently in a
following commit. For now, only "disabled" is used.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3534>
This allows GNOME Shell to communicate the user desired XKB model
to the compositor instead of sticking with the pc105 default.
Particularly useful for those with a custom keyboard layout/irregular
keyboards.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2760>
Transient dialogs are meant to be placed centered over their
parent. However as we don't use the DIALOG window type on
wayland, this currently only works for modal dialogs.
To fix this, also apply the policy to NORMAL windows for
wayland clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3533>
Some panels only support fixed resolutions and fixed refresh rate with reduced blanking:
Established Timings I & II: none
Standard Timings: none
Detailed Timing Descriptors:
DTD 1: 2560x1600 120.001823 Hz 8:5 203.283 kHz 552.930000 MHz (345 mm x 215 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 6 Vback 85 Vpol N
DTD 2: 2560x1600 48.000295 Hz 8:5 81.312 kHz 221.170000 MHz (345 mm x 215 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 6 Vback 85 Vpol N
...
Minimum Pixel Clock: 552922 kHz
Maximum Pixel Clock: 552922 kHz
When using mirror mode, resolutions like 2560x1440 120Hz can be too high
to meet the pixelclock limitation, so 2560x1440 90Hz is selected
instead. However, the panel only supports 120Hz so using 90Hz result to
failed mode set.
So add reduced blanking to fallback mode, so correct refresh rate can be
used.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3449>
Since StDrawingArea in gnome-shell is the only user of ClutterCanvas,
it is possible to move ClutterCanvas completely out of Mutter to
gnome-shell. This allows to remove another Cairo dependency from
Mutter.
This patch removes ClutterCanvas code from Mutter.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3470>
To paraphrase jadahl: we have a dedicated KMS thread now, which also
has realtime scheduling enabled unconditionally. realtime scheduling
on the main thread isn't too great of an idea, considering GC can
take a hot minute.
And to quote rmader: we most likely won't be able to make the main
thread rt as long as we use GJS and thus have GC.
So let's get rid of it! It's just been breaking things anyways.
This just ignores the setting; we'll fully remove it when GNOME 46
comes around.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3296>
This is the unified focus (key, IM, pads, ...) for the focus window.
Just like MetaWaylandPointer and others keep track of the "current"
surface, this is the "current" surface for those (not necessarily
the focused surface, e.g. in the case of compositor grabs).
Since this unified focus will exist regardless of keyboard
capabilities (e.g. even if just for "logical" focus like IM/clipboard
that does not depend on input devices), it does not make sense
to trigger a focus sync on keyboard capability changes, the focus
is staying the same, we however need to focus the keyboard interface
to the already existing focus when the capability is enabled.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3511>
Instead of letting the MetaDisplay be aware of the Wayland compositor,
and take care of updating its focus. This makes the MetaWaylandCompositor
able to track focus changes by itself, using MetaDisplay as the source
of truth.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3511>
If we happen to be changing focus to a window *while* taking focus
away from Clutter widgetry, we would unintendedly trigger reentrance
in a way that the old focused window remained in focus, by asking
to focus the default focus window in an untimely manner.
To handle this reentrancy, delay dropping the Clutter key focus
until the window focus changed, so that the focus change will look
up the default focused window in the workspace, and find the up to
date one.
Fixes: ae102ee301 ("x11: Refactor ClutterStage key focus management")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3467>
Trying to get the xwindow of a wayland only window would fail when
casting to a x11 window. Which happens as
meta_x11_display_set_input_focus is called whenever the focused
window changes, whether it is a wayland or x11 one
Fixes: bc9cd123e ("window: Move xwindow to WindowX11")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3506>
For tablet device, the tool was created when the "Wacom Serial IDs" prop
changed values. This property does not exist on the xf86-input-libinput
driver but v1.5.0 of that driver has a different property for the serial.
The serial is constant (the driver creates one X device per serial), so
we can fetch it after device creation and set it then. For earlier
versions of the driver we assign the random serial 0xffffffaa - good
enough to have at least a tool.
This fixes the crash in #3120 - clutter_event_motion_new()
overrides event->device to the tool's device (if any). Without a tool
motion events use the Virtual Core Pointer instead and our source device
is never added to the stage's priv->pointer_devices.
When we generate an crossing event (which uses the source device) we
fall afoul of an assert in clutter_stage_update_device() that expects
our source device to be in priv->pointer_devices.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/3120
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3383>
DRM's kms atomic code was updated to include an API to set the mouse
cursor hotspot. This has historically been missing in the atomic kms
which meant that the virtualized drivers which require mouse cursor
hotspot info to properly render had to be put on a deny list and
had to fallback to the legacy DRM kms code.
Implement the new hotspot API by checking whether the device supports
hotspot properties and if it does set them on the cursor plane. This
enables atomic kms on all virtualized drivers for kernels where
mouse cursor hotspots are in drm core.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3337>
Add META_KMS_PLANE_PROP_HOTSPOT_[X,Y] properties
to the MetaKmsPlaneProp enumeration, and
properly initialise them.
Also, add a convenience method in meta-kms-plane
(i.e., `meta_kms_plane_supports_cursor_hotspot`)
to check whether a plane supports hotspot
property setting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3337>
Based on the pressure curve control points sample a bezier curve and
then look up the pressure at that point of the curve.
We sample 256 points and do linear interpolation in between, this
strikes a balance between having to calculate the point for all
8K pressure points a modern pen supports while still giving us
reasonable detailed curves.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3158
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3399>
This keeps the existing ClutterBezier implementation but changes
the visible API to match the needs of the tablet tool pressure curve:
a bezier defined within a [0.0/0.0, 1.0/1.0] box,(sampled
into a set of x->y mappings for each possible pressure input x, and
a lookup function to get those values out of the curve.
This patch moves the internally-only functions to be statics and changes
meta_bezier_init() to take only the second and third control point, as
normalized doubles. Because internally we still work with integers, the
bezier curve now has an integer "precision" that defines how many points
between 0.0 and 1.0 we can sample.
The meta_bezier_rasterize() function calculates the x->y mapping for
each point on the bezier curve given the initial scale of the curve.
That value is then available to the caller via meta_bezier_lookup().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3399>
The ClutterBezier code was removed in
580d62b9b clutter: Remove unused Path related types
because it wasn't used anywhere. We do need a bezier curve for the
tablet tool pressure curve calculation though so let's move it
to the native backend and rename it to MetaBezier in the process.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3399>
This addresses the following race condition:
1. Window+MetaFrame are created non-fullscreen, _MUTTER_FRAME_EXTENTS
is initialized through widget measuring, accounting for frame.
2. Window and MetaFrame become fullscreen.
3. MetaFrameContent gets first size allocation, already fullscreen.
4. Borders were initialized to 0,0,0,0, become set to 0,0,0,0 correctly
reflecting fullscreen, however notify::borders is not emitted.
5. _MUTTER_FRAME_EXTENTS stays accounting for the frame extents.
It sounds sensible to have the borders initialized to a meaningful value,
so account for the first time the border would be set due to the content
being (re)sized, and let this first value trigger notify::borders resulting
in _MUTTER_FRAME_EXTENTS updates.
Since all later _MUTTER_FRAME_EXTENTS changes happen through content
resizes, we only have to cater for this initial handover between the
frame/content initialization paths done through widget measuring and
the later paths done through MetaFrameContent resizes.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2937
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3476>
The test makes sure the YCbCr formats create the expected image and we
don't accidentally break it.
Like all wayland tests, this is now part of mutter/wayland, mutter/tty,
and mutter/kvm and will use either shm or dma-buf depending on which
suite is chosen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
Finding the shm offset and shm stride for each plane is the main issue.
The rest is just creating multiple textures for each plane.
One assumption is that shm planes are always contiguous in memory so the
next plane comes directly after the size of the current plane.
The size of a plane is determined by the height and stride. There is
only a single stride parameter for shm buffers but we assume that the
first plane is always non-subsampled which gives us a number of "logical
elements" on one line (stride / bpp of the first plane). The stride of
the other planes is then the number of logical elements devided by the
subsampling factor and multiplied by the bpp of the plane.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
The assumption is that all planes are always contiguous, and we don't
have any multi-plane formats where the first plane is subsampled.
The stride of the entire buffer is then just the stride of the first
plane and the stride of the other planes is derived from that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
Instead of forcing every user of WaylandBuffer to create a listener and
destroy the wl_resource and the WaylandBuffer object, provide a default
listener which does it for the user.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3371>
The texture coordinates of all planes should be the same in theory so
using the coordinates of the first plane works.
The reason for this change is that Cogl somehow doesn't manage to get us
the correct coordinates for the 3rd plane in some circumstances. This is
really a workaround but not wrong in any way.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3176
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3469>
ClutterInputFocus/GtkIMContext uses char based offset for
delete_surrounding, however, text_input_v3 uses byte based offset for
it. Currently only GTK with mutter can work correctly via text_input_v3
because they both forget to convert between char based offset and byte
based offset.
This commit fixes it in mutter by saving committed surrounding text in
MetaWaylandTextInput and converting char based offset to byte based
offset with the UTF-8 encoded surrounding text.
Fixes <https://gitlab.gnome.org/GNOME/mutter/-/issues/2146>.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2712>
Calculating the mipmap width as half of the texture width leads to a
mipmap width of zero for textures with width of 1 which leads to an
early exit instead of a mipmap texture.
Fixes: 16fa2100d ("shaped-texture: Stop using MetaTextureTower and use GL mipmapping instead")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3468>
A surface commit may change the buffer scale but not attach a new
buffer. In that case, the size of the previously attached buffer needs
to be consistent with the new buffer scale.
Fixes: 7649e2f3ab ("wayland/surface: Move buffer size check to meta_wayland_surface_commit")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3466>
meta_wayland_surface_get_buffer_width/height uses the currently applied
buffer, which may have a different size.
Fixes: 7649e2f3ab ("wayland/surface: Move buffer size check to meta_wayland_surface_commit")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3466>
Multiple reasons:
* More consistent with the protocol spec language.
* Ensures the size is checked and the protocol error sent from a
protocol processing context, instead of whatever context
meta_wayland_surface_commit might get called from.
* The latter implies that surface->resource is guaranteed to be valid.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3211
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3463>
Integrate it into the code, instead of depending on MetaDisplay
notify::focus-window for it. Now, instead of focusing explicitly the
stage window, we focus a NULL window, and let the MetaX11Display
determine whether focus should go to the stage window if there's
a focused actor, or the no_focus_window if nothing has focus.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3269>
We currently offer the mechanism for GNOME Shell to implement, and
while this is not exercised often (our entries are typically surrounded
by a ClutterGrab ensuring key events, so this is reserved to grab-less
entries, probably there are some in extensions), this is arguably
something Mutter should cover by itself without GNOME Shell guidance.
This is only necessary on the X11 backend, although it is conceptually
more tied to the MetaX11Display connection, so perform the focus
tracking there only if not running as a Wayland compositor (i.e. --x11).
This avoids the only case where the low-level
meta_x11_display_set_input_focus_xwindow() function is used, or rather
makes it completely a MetaX11Display implementation detail, leaving
only the MetaDisplay API as the high-level entry points to handle
window key focus.
The public API that allowed GNOME Shell to implement these mechanisms
is also gone in this commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3269>
There might not be a single plane that is "for" a CRTC, so remove the
API that made it appear as if it did. The existing users only cared if
there was some plane for said CRTC, so replace the getters with API that
just checks the existance at all.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
When there are a set of primary planes, and a set of CRTCs, where each
plane can be used on multiple CRTCs, we need to make sure that when we
mode set and page flip, each CRTC gets assigned an individual plane that
isn't used with any other CRTC.
Do this during the monitor resource assignments that sets up later to be
applied configurations of the mode setting objects, but with the new
hooks into the backend, so that we don't need to teach the monitor
config manager about planes.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2398
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
This means that it doesn't necessarily mean what transform / rotation
the hardware resource gets, e.g. it instead represents the logical
transform related to the configured mode. This allows us to postpone
checking the plane capabilities until later (as rotation capabilities
depends is a plane property), when a plane has been assigned.
This was in practice already handled when configuring the
transform-via-offscreen case, handled when creating the view, and the
mode setting configuration.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
When we're configuring monitors, allow backends to add backend specific
assignments during resource assignment (mapping connectors and CRTCs
etc).
This will later allow the native backend's KMS monitor resources to
assign a primary plane and optionally a cursor plane during
configuration. This will then dictate what plane will be used for
primary plane updates, as well as cursor updates, until reconfigured
again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
A set of primary planes can be usable with a set of CRTCs, meaning we
can't have general purpose functions that gets a plane for a CRTC, as
there is no such one to one relationship.
For tests we still want to have helpers that makes writing tests easier,
so to prepare for those functions going away, make the tests do the
equivalent themselves.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3428>
Musl doesn't seem to include this by default so explicitly including it
should fix compilation on Musl.
Tested with Clang 16/17 and GCC 14.
Error:
src/backends/meta-fd-source.c:70:3: error: call to undeclared function 'close'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
close (fd_source->poll_fd.fd);
^
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3078
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3455>
Otherwise a tablet in relative mode will never have a tool set and
nothing happens on motion events - meta_wayland_tablet_seat_update()
simply exits early for tablet proximity, button or motion events.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3410>
The include is currently satisfied by
window-x11-private → iconcache → x11-display-private
The icon cache is about to be removed, so add the missing include
directly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3452>
Changing the MultiTexture may require a different set of pipelines when
the texture format is different. We keep track of the attached
MultiTextureFormat just like we do for the width and height.
This fixes misrendering when a client attaches buffers with different
MultiTextureFormats to the same surface.
Fixes: 3dd9f15eb ("shaped-texture: Start using MetaMultiTexture")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3456>
We want to run those tests in VKMS later with the same reference image.
To make the tests as close to each other as possible we use the same
resolution for the VKMS and the virtual output which is 640x480.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3350>
This test currently only works because the monitor has the same width
and height. Generalize it to arbitrary monitor sizes by taking into
account that width and hight are swapped for some rotations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3350>
Most tests use the draw_surface function to draw a solid color to a
surface. This moves it from the shm-only path to WaylandBuffer which
makes all of those tests usable via dma-buf.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3350>
The custom drawing requires adjusting the test. Instead of poking at
memory directly, we can just draw a color at certain coordinates which
makes it independent of the pixel format used.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3350>
It abstracts away the kind of buffer so clients can be tested with both
shm and dma-buf paths. We'll make use of it in the future by adding the
wayland tests to the TTY and KVM test suits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3350>
When capturing the view we have to make sure the stage is actually
updated. In direct scanout mode the stage is unmodified and we can't
find the content we want to test.
Currently the ref-tests are all running on non-native setups where
direct scanout is impossible but we will change that soon!
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3350>
Transfer none was achieved using a stack GArray in the stage which
would get resized to 0 at the end of every frame to "free" it.
In the case of direct scanout however, painting the next frame only
happens after leaving fullscreen again. Until then the array just kept
growing and because GArrays don't reallocate when shrunk, this memory
remained allocated even after leaving fullscreen.
There is no cache benefit from storing paint volumes this way, because
nothing accesses them after their immediate use in the calling code.
Also the reduced overhead from avoiding malloc calls seems negligible as
according to heaptrack this only makes up about 2-3% of the temporary
allocations.
Changing this to transfer full and removing the stack array simplifies
the code and fixes the "leak".
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3191
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3442>
This is a step in cleaning up the Clutter context management. By making
it a GObject it's easier to add e.g. properties and features that helps
with introspection.
For now, this means the context creation is changed to go via a
"constructor" (clutter_create_context()). This is so that the global
context singleton can be mantained outsid of ClutterContext, until it
can be removed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2016>
The original purpose of being able to report errors is no longer
relevant, since the Clutter backend is now practically a thin wrapper
around the actual backend, which has already dealt with error reporting.
Thus move this to the regular constructor path.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2016>
The current usage of MetaWindow::unmanaging may result in confused
focus window lookups while undoing the MetaWindowDrag grab (i.e.
still pointing to the window that is now being unmanaged).
The meta_window_unmanage() function itself takes care of changing
focus outside of the window being unmanaged, so postpone the
MetaWindowDrag undoing to a point after that is done.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3073
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3376>
Since meta_kms_impl_device_get_sync_file always returns the same
file descriptor referencing the same sync_file, this means the atomic
ioctl doesn't need to wait for any fences to signal. This is fine
because we already waited for the buffer to become idle before applying
the Wayland surface state.
Fixes the atomic commit ioctl spuriously synchronizing to the screen
cast paint (at least with the amdgpu driver), which could result in
the page flip missing its target scanout cycle.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3148
v2:
* Rename local variable to signaled_sync_file for consistency with new
function name
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3389>
It returns a file descriptor which references a signaled sync_file.
v2:
* Change function name and add Doxygen comment to hopefully make its
purpose a bit clearer (Ivan Molodetskikh)
v3: (Jonas Ådahl)
* Create sync_file from scratch via a syncobj, no buffer needed anymore
* Initialize priv->sync_file = 1 and use g_clear_fd in finalize
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3389>
The debug controller can optionally, when passing --debug-control,
enable manipulating debug state, so far enabling/disabling HDR, via
D-Bus.
It's always created, in order to have a place to store debug state and
emit signals etc when it changes, but so far, it doesn't have its own
state it tracks, it just mirrors that of the monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3432>
While we should ideally have a sensible cursor theme, handle the
case of cursor themes that lack certain cursor names, and fallback
to the 'default' cursor in those cases.
The 'grey rectangle' fallback is still left, in case we even fail
to load a 'default' cursor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3295>
When a stream is destroyed by a consumer, mutter won't be able to
recognize that.
For mutter, the stream just paused, but did not disconnect, because the
connection state of a PipeWire stream only represents, whether the
respective PipeWire context is connected to PipeWire.
In addition to that, it may be the case, that the stream consumer just
recreates the stream.
So even if mutter would be able to know, when the stream consumer
destroyed a stream, but not the whole screencast or remote-desktop
session, then mutter would not know, whether the stream will be resumed
eventually or not.
So, add an explicit API call to the screencast interface to stop a
stream.
For virtual streams, this also means, that the respective virtual
monitor is destroyed.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2889
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3307>
When a virtual stream is destroyed, its respective virtual monitor is
destroyed too. When the virtual monitor is destroyed, mutter reloads
the monitor manager.
However, at this point, the virtual stream is not completely destroyed
yet. The viewport of the virtual monitor still exists at this point and
when the monitor manager reloads, it will try to fetch the logical
monitor of the now destroyed virtual monitor, which will fail and thus
gnome-shell will run into a segfault.
Fix this situation by reloading the monitor manager in an idle callback.
When the monitor manager reloads, the virtual monitor is completely
gone, since the viewport of the virtual monitor is destroyed after the
virtual monitor itself.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2864
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3307>
There is no way to set any gamma luts, or do anything other color
management related. Eventually we'll probably want to, but that requires
bringing color management plumbing to PipeWire.
Doing this is also needed when running a headless session, as when
headless, polkit doesn't let us create colord devices without explicit
user permission, meaning we'll spam the session with useless dialogs
each time a session is started.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3423>
Given destruction order, the display goes away before the stage, so
this lingering signal connection may trigger unintended crashes.
Fixes: 05eeb684d1 ("window: Postpone focusing until grab ended if uninteractable")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3422>
`count_mode_setting_devices` was incorrect in both name and in function.
What it was actually doing was counting GPUs that had been registered with
the backend so far (during the `init_gpus` loop). What it was intended to
do was to count the number of `MetaRenderDeviceEglStream` instances, which
is the thing we're limited to only one of. So `count_mode_setting_devices`
would return zero whenever the first GPU initialized happened to be a
`MetaRenderDeviceEglStream`, which would in turn prevent
`MetaRenderDeviceEglStream` from successfully initializing. Seems it only
ever worked in the case of a hybrid system where the first GPU initialized
was GBM-based.
Now we count `MetaRenderDeviceEglStream` instances (zero or one) externally.
This allows initialization to succeed when it happens to be the first (or
only) GPU. And so `MUTTER_DEBUG_FORCE_EGL_STREAM=1` now works.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2905>
For scanout on a secondary GPU, for the time being try only formats
which are guaranteed to be renderable with GLES3, which notably excludes
10 bpc formats without alpha channel.
v2:
* Use separate format array for 10 bpc formats without alpha.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3139>
If the EGL_KHR_no_config_context extension is supported, use it to
choose a format per onscreen which is compatible with the scanout CRTC
and the GL rendering API used.
Suggested by Jonas Ådahl.
v2:
* Drop code which checked for GLES3 renderability. Makes no sense for
various reasons, in particular that EGLconfigs are about EGLSurfaces,
whereas secondary GPU contexts use an FBO for blitting.
* Use error parameter directly for meta_renderer_native_choose_gbm_format
call (Jonas Ådahl)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3139>
Preparation for the following commits, no functional change intended.
v2:
* Pass through MetaEgl pointer
v3:
* Make it return gboolean (Robert Mader)
v4:
* Add debug logging and corresponding purpose parameter
v5:
* Fix excessive function parameter indentation (Jonas Ådahl)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3139>
Split the struct into mutable and immutable parts. Access the mutable
parts via getters and the immutable parts via a single struct. This
avoids copying around the immutable parts.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3280>
In profilers with a timeline or flame graph views it is a very common
scenario that a span name must be displayed in an area too short to fit
it. In this case, profilers may implement automatic shortening to show
the most important part of the span name in the available area. This
makes it easier to tell what's going on without having to zoom all the
way in.
The current trace span names in Mutter don't really follow any system
and cannot really be shortened automatically.
The Tracy profiler shortens with C++ in mind. Consider an example C++
name:
SomeNamespace::SomeClass::some_method(args)
The method name is the most important part, and the arguments with the
class name will be cut if necessary in the order of importance.
This logic makes sence for other languages too, like Rust. I can see it
being implemented in other profilers like Sysprof, since it's generally
useful.
Hence, this commit adjusts our trace names to look like C++ and arrange
the parts of the name in the respective order of importance.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3402>
Now that the monitor screencast records to DMA-BUF buffers immediately
(since bc2f1145d8), and we know which phase of the paint rountines we
are (since last commit), we have the opportunity to bring back the
blitting technique.
Bring back blitting. This time, instead of simply failing if the blit
fails, add a fallback path that does a stage paint if something goes
wrong. Unlike the previous implementation of blitting, this one only
blits the current view - it does not blit all views that intersect
with the screencasted monitor.
Embedded cursors should still be fine because hardware cursor is
inhibited while embedded cursor screencasts are running.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3406>
Track where we are in terms of the paint cycle. Do this through an
enumeration that is passed through the paint vfuncs of screencast
sources.
Right now, this information is not used by any one of the sources,
but next patch will use it to prevent blitting when detached from
the paint cycle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3406>
With the existing ClutterInputMode terminology (inherited from XI2),
hardware devices may be "physical" (i.e. attached to a logical device),
or "floating" (i.e. detached from all logical devices).
In the native backend, tablet devices are closer to "floating" than
"physical", since they do not emit events relative to the ClutterSeat
pointer logical device, nor drive the MetaCursorTracker sprite. This
is in contrast to X11 where all tablet devices drive the Virtual
Core Pointer by default, along with every other pointing device.
Change this mode in the Wayland backend to be more coherent. The
existing checks on the ClutterInputMode along Mutter seem appropriate
for handling these as floating devices, since they mainly care about
logical vs non-logical.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3393>
The window actor can be mapped every frame, e.g. when it is dragged in
the overview. This commit keeps track when the geometry changed and we
didn't managed to sync the geometry yet and need to sync it at a later
time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3404>
At the end of the sync_actor_geometry function the window buffer_rect
and the WindowActor position and size are the same and consistent.
Call the virtual method at the end and let the implementations look at
either the buffer_rect or the actor position/size itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3404>
In some cases the window is not mapped when the geometry changes.
Without the mapped window the surfaces are not mapped either and don't
have a sensible allocation.
This patch makes sure we abort syncing the geometry if the window is not
mapped and also make sure we sync geometry when the actor eventually
does get mapped.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3152
Fixes: 8f4ab53bd ("window-actor/wayland: Ensure to use allocation for black background check")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3401>
Scoped traces are less error prone, and they can still be ended
prematurely if needed (this commit makes that work). The only case this
doesn't support is starting a trace inside a scope but ending outside,
but this is pretty unusual, plus we have anchored traces for a limited
variation of that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3396>
Allow only specific files to use those deprecated APIs making
it easier to find where deprecated APIs are still in use
and avoid introducing new usages without being noticed
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3400>
Group all the three config files from clutter/cogl/meta into one
and also remove unnused configurations and replace duplicated ones
This also fixes Cogl usage of HAS_X11/HAS_XLIB to match the expected
build options
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3368>
Currently, json-glib is used for two things:
- For loading scripts, nothing seems to use that in real life other
than some tests
- For debugging paint nodes
For now, the PR drops the first use case and only require json-glib
if it is a debug build
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3354>
We don't actually need the host to be a container, so simply work on
actors saving us a few casts.
This'll simplify dropping ClutterContainer entirely later, and
StViewport/ShellWindowPreviewLayout will also need to be updated for the
new signatures
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3384>
Sticky keys configuration changes reset the pressed modifier state mask,
even though the XKB state might already match with the expected new
state. In those cases we can avoid the XKB state mask update completely.
This also fixes a crash at initialization with sticky keys toggled on,
since configuring the device a11y settings will trigger a XKB state
mask merely reassuring the initial state with no modifiers pressed,
while the connection between the ClutterSeat and the impl object has
not been set up yet. This crash was introduced by commit 00bb4190b
("backends/native: Drop device_native->seat_impl field").
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3392>
Tests that
* the window under the cursor has focus
* focus_default_window won't move the focus away from a previously
focused window even if the cursor is somewhere else
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
When the desktop is focused instead of a window we want to tell the core
about this to handle focus-mode mouse. This is handled by looking for
CLUTTER_LEAVE events where the newly focused window is NULL.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
Take a reference to the window to make sure the MetaFocusData->window
pointer is not pointing to a freed object.
Also make sure that the window that we want to focus is not currently
unmanaging.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
On X meta_window_handle_enter was called when the desktop window was
entered. On wayland the "desktop" is no window anymore. We still want to
inform the core that the desktop is focused, so it can unfocus windows
if focus-mode is mouse.
This commit prepares the core for handling a NULL windows to mean the
desktop.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
The following commits will make it possible to pass a NULL window to
display_handle_window_enter/leave to represent the cursor entering the
desktop. This means it can't be a method of the window class anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
If we have an existing focused window that may have focus, default focus
will leave the focus there. An unmanaging window for example must not
have focus and default focus will continue to select another window in
this case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
The layout manager takes the generic ClutterActor expand/align
properties into account. Everyone should already use those instead
of the custom layout/child properties, so removing them should have
little fallout, while making for a nice cleanup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3382>
It tests various sub-surface corner cases. It would fail without the
previous fixes.
v2:
* Fix draw_descendant parameter formatting
* Make toplevel window fullscreen (Robert Mader)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
To make sure a new wl_subsurface created for the same wl_surface won't
inherit the position from the wl_subsurface being destroyed.
v2:
* Move into permanently_unmap_subsurface
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
Instead of duplicating the code in both.
v2:
* Rename helper to make it clear(er) that it permanently unmaps the
sub-surface
* Move transaction allocation & commit into the helper
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
wl_subsurface_place_above/below need to hook it up to the parent
surface's pending state, so that it gets picked up next time the parent
is committed.
v2:
* Adapt to wl_subsurface_destructor not resetting sub-surface position
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
This is simpler, and makes sure it's called only once for each surface
in the transaction as committed.
v2:
* Use array for surface states with placement ops (Jonas Ådahl)
v3:
* Use GPtrArray instead of GArray (Robert Mader)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
This is necessary to make sure the unmapped sub-surface is no longer
visible.
v2:
* Use META_IS_WAYLAND_SUBSURFACE (Jonas Ådahl)
* Use same sequence of assignments in both cases
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
meta_display_ping_window() does nothing when check-alive-timeout is set
to 0, but meta_window_check_alive_on_event() was relying on it to reset
the events_during_ping. Without this events_during_ping was just
counting up until the threshold was reached and the window was marked as
not alive, preventing further pointer events from being sent to the
window.
Fix this by not doing anything in meta_window_check_alive_on_event() if
check-alive-timeout is 0, similar to meta_display_ping_window().
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3142
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3367>
Locked modifiers should probably not have an effect on keybindings
while toggled. this is most relevant for modifiers that can be
either/both pressed or locked (e.g. Caps Lock key), if used in
keybindings.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3369>
This struct contains the pressed/latched/locked set of modifiers applying
to the event, and may be filled in by backends generating those events.
Other places where we forward modified key events, state may be normally
obtained from the original event.
Since this constructor is used in a variety of places, this commit
updates them all in one go.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3369>
If multiple sync events are send in the same dispatch, a further call to
wait_for_sync_event will get stuck. Fix this by keeping track of the
latest sync event serial in the display and always compare against that.
This also means sync event sequences must start at 0 and increase by 1.
The wayland-x11 interop test is the only one where that wasn't already
the case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3358>
Currently, we use cairo_region_t despite it being a thing wrapper around pixman_region_32
In order to push for a cairo-less and wayland only build in the future, replace
cairo_region_t with a thin wrapper that is almost a copy of the upstream cairo implementation
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3292>
Whenever a MetaWaylandTestClient exists without success the calling test
will fail. This fixes a bunch of cases where the test would get stuck
waiting for some event from the client when it already died and won't be
able to send the event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3348>
The test and dist CI jobs run wrap the meson calls in dbus-runner to
avoid setting up dbus servers and mocking services for every test but
the dbus-runner invocation from meson test didn't actually skip all the
setup.
This nested mocking also doesn't work because the system bus is assumed
to be the host system bus and not a mocked one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2618>
This means one can run meta-dbus-runner.py effectively mocking
everything relevant except logind itself, meaning one can run from a TTY
and get permission to mode set etc, while still mocking things like
gsd-color, colord, etc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2618>
Make CoglBuffer an abstract class and inherit the various Cogl*Buffer types from it.
As none of the subclasses is overriding the vtable functions, they were not turned into
vfuncs but plain function pointers in CoglBuffer.
We still use _cogl_buffer_initialize until we port the various params into actual construct-only
properties, similar to the previous commit for CoglTexture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3193>
- Make Texture a parent GObject class and move the vtable funcs as vfuncs
instead of an interface as we would like to have dispose free the TextureLoader.
- Make the various texture sub-types inherit from it.
- Make all the sub-types constructors return a CoglTexture instead of their respective
specific type. As most of the times, the used functions accept a CoglTexture,
like all the GTK widgets constructors returning GtkWidget.
- Fix up the basics of gi-docgen for all these types.
- Remove CoglPrimitiveTexture as it is useless: It is just a texture underhood.
- Remove CoglMetaTexture: for the exact same reason as above.
- Switch various memory management functions to use g_ variant instead of the cogl_ one
Note we would still want to get rid of the _cogl_texture_init which is something
for the next commit
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3193>
The helper doesn't do anything that makes it worth
to be exposed as public API. End-users, such as GNOME Shell could have
an in-tree helper if they end up using it that much.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3086>
The shell might raise and make windows recent for another workspace when
an app gets activated on another workspace. Making the windows only
recent on the current workspace thus results in inconsistent focus when
another window of the same app is closed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3315>
There are existing extensions that implement desktop icons as
a combination of a GTK program and a small extension to make
the wayland window behave as if it was of type DESKTOP on X11.
That's quite painful, as it requires reimplementing WM behavior
that is already implemented in mutter itself (stacking, stickiness,
skip-taskbar, ...), as well as modifying gnome-shell to consider
the window in addition to "real" DESKTOP windows (workspace-switch
animations, ctrl-alt-tab, ...).
In addition to that, other extensions may also have special handling
of DESKTOP windows, and their code cannot easily be monkey-patched
to handle "alternative" desktop icons.
This whole game of whack-a-mole can easily be avoided by allowing
desktop-icons extensions to mark their desktop windows as DESKTOP,
so do just that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3305>
Assigning the corresponding stack layer of DESKTOP windows is
currently X11 specific, because there is no way for wayland
clients to set the DESKTOP window type.
This is about to change, so move the code to the generic layer
handling.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3305>
Change the order of events to adhere to the Wayland specification for
wl_keyboard.enter, which mandates:
> The compositor must send the wl_keyboard.modifiers event after
> this event.
Mutter currently sends the modifiers event before the enter event,
which may break applications that require information about the focused
surface in order to properly handle the modifiers.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2231
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3341>
These functions ends-up calling gdk-pixbuf for loading textures/bitmaps
from a file and they don't seem to be used anywhere.
These changes are only useful with the following up commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3097>
