wait and wait_configure after a single resize is useless and a race.
Resize is a client side action which doesn't result in a configure and a
wait doesn't sync for a resize as well.
Sometimes the resize is paired with another action, such as maximize,
fullscreen or show. In those cases a configure will be generated and a
previous resize is accounted for.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3842>
Commit e775052429 changed the code such that resetting the actor is done
when a surface role is assigned. The dnd surface assigned vfunc doesn't
chain up which means the code to reset the actor is never hit and the
dnd surface never shows up.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3540
Fixes: e775052429 ("wayland/actor-surface: Reset the actor on role-assignment")
In these checks, it's an important detail to preserve subpixel information
in order to correctly determine whether the coordinates are inside or
outside a view.
Otherwise, small enough motion towards the left/top might get rounded
to 0, be seen as "inside the view", and the pointer coordinates be allowed
to escape the viewport constraints.
This was figured out by Pascal Nowack before me, with a difference of
minutes. Credit where credit is due.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3530
Fixes: 6c972546f1 ("mtk: Add Rectangle.contains_point")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3820>
In meta_seat_impl_remove_virtual_input_device(), the 'device'
variable is first removed from MetaSeatImpl, then a "device
removed" event is generated with it.
The problem here is that, if this is the last reference of
'device', the removal from MetaSeatImpl will destroy it. Then
the freed variable will be used to create the "device removed"
event, which is a use-after-free situation.
Fix that by owning an extra ref to 'device' as long as the
function is executing. Do this by declaring a g_autoptr
variable with the extra ref. This g_autoptr variable is cleaned
up by the end of the function, which achieves the desired effect.
Spotted by Coverity.
CID: #1594046
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3835>
Right now the unmapped signal doesn't always fire which means we didn't
see a surface that's being unmapped in these code paths before. In
particular the resource, window and role can be gone. Handle those
cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3783>
This allows us one less level of indentation of all the tests. It is not
entirely true, the X11 backend test case script can run without it, but
it isn't valuable enough to run without the native backend being enabled
to complicate building.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
Instead of having get_seat_id() handle most cases, and then special
casing another case outside of it, let it handle them all, making all
users just able to call get_seat_id().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
Except the X11 backend test, it still needs an X server. Eventually we
can replace it with the equivalent that uses Xwayland, but that needs a
"scaled down" mutter that runs as the host compositor for Xwayland, that
doesn't expose anything on the session bus.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
It's constructed as a native backend headless backend, but uses a custom
monitor manager (based on MetaMonitorManagerNative) that creates a fake
monitor. Rendering is unconditionally done with the surfaceless
renderer.
The test devices used now use virtual devices, meaning some changes to
the tests to e.g. not set names, and not dealing with input devices
directly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
This is where the viewports are updated, and so lets move connecting the
signal together with it. It also helps a future change to the test
backend where it creates a custom monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
Test touch devices are autocleaned up, but if a test case explicitly
needs it to be removed at a certain point, make sure to also clear the
pointer so that it doesn't get removed twice.
Right now it's harmless, but in a later commit it'll expected to only
remove a device once.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3812>
`update_secondary_gpu_state_post_swap_buffers` decides what our front
buffer object will be. There is only one answer. So return it as the
function result instead of making the caller figure it out.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3830>
It's always equal to `onscreen_native->next_frame` and we can't eliminate
that copy so easily. Removing the parameter removes all ambiguity about
where the next frame will come from.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3829>
Starting in mesa 24.1 (good in 24.0.9, bad in 24.1.1), the current
kernel somehow manages to hang our VKMS based tests. Let's update the
kernel so we can bump the CI image without running into those hangs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3826>
When a client wants to lease DRM resources, it will attach the list of
connectors is wants to lease and then submit the request.
Once the request is submitted, destroy the DRM lease request object.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When a new device is connected, register a new global for it.
When a device is gone, remove the global. Upon receiving this event,
the client should destroy any matching wp_drm_lease_device_v1 object.
To destroy a wp_drm_lease_device_v1 object, the client must first
issue a release request. Upon receiving this request, send a released
event and destroy the object.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When the list of connectors available for lease changes send
wp_drm_lease_device_v1.connector events for added connectors and
wp_drm_lease_connector_v1.withdrawn events for removed connectors,
followed by a wp_drm_lease_device_v1.done event.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
After sending the drm_fd event, send zero, one or more connector events.
After all currently available connectors have been sent, send a
wp_drm_lease_device_v1.done event.
Co-authored-by: José Expósito <jexposit@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
Add meta_kms_impl_device_open_non_privileged_fd() that returns a
non-master file descriptor for a MetaKmsImplDevice.
It'll be required to implement wp_drm_lease_device_v1_send_drm_fd() in a
future commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
The manager keeps track of which connectors are leasable in general,
which connectors and resources are already part of a lease, and keeps
track of when leases get revoked.
When leasing out connectors, the required drm resources to drive the
connectors are included in the lease as well.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When a plane is leased, it is assigned to a CRTC which is leased. When
trying to find a primary plane for a modeset, skip the assigned planes
on leased CRTCs to avoid sharing the resources with the leased process.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
This allows us to keep track when primary and cursor plane assignments
on a CRTC are unassigned. With this commit, all planes which are
assigned are actually in use and can't be assigned to anything else.
We'll make use of that fact when we search for a leasable primary plane.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
The lease_objects function takes connectors, CRTCs and planes which are
turned into a drm lease. The resulting lease can be revoked with
revoke_lease. With list_lessees the currently active leases can be
queried.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
With leasing, we will give another client control over connectors but
they also need a CRTC to drive them. Those CRTCs won't be available to
the desktop/monitor-manager.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
Add an environment variable (MUTTER_DEBUG_LEASE_CONNECTORS) that allows
set a ":" separated list of connector names as available for lease.
The names of the connectors can be found in "/sys/class/drm".
To illustrate it with an example, the names of the connectors and its
status can be fetched with this command:
$ for p in /sys/class/drm/*/status; do con=${p%/status}; echo -n "${con#*/card?-}: "; cat $p; done
DP-1: disconnected
DP-2: disconnected
DP-3: disconnected
DP-4: disconnected
DP-5: connected
DP-6: connected
DP-7: disconnected
eDP-1: connected
HDMI-A-1: disconnected
And, to set "DP-5" and "DP-6" available for lease, the environment
variable can be set like:
MUTTER_DEBUG_LEASE_CONNECTORS=DP-5:DP-6
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
This is intended to be used to filter out what connectors will be
available for lease, i.e. non-desktop ones.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
When mutter creates a dma-buf buffer for screencasting, the buffers
stride will, among other attributes, also be defined.
However, mutter currently only sets the buffer stride, when actually
recording a frame, but not when adding it.
This behaviour disallows screencast consumers (clients) to already
import the respective buffer (i.e. for Vulkan creating a VkImage for the
dma-buf image), as the stride is not yet communicated to the client.
Since the stride won't change after adding the respective buffer,
directly set the buffer stride, when adding the PipeWire buffer. This
allows screencast consumers (clients) to do optimizations in their
encoding paths.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3827>
meta_flush_input() creates and runs a main loop in order to block until the
input thread has flushed all its events. This main loop is created on the
default main context though (NULL is passed to g_main_loop_new()), which
means that while the main loop runs, the default main context is active (aka
stage updates will happen).
This causes an issue with tests, specifically when there already is a stage
update queued before running meta_flush_input(): meta_flush_input() will
(as expected) block until the input thread flushed all its events to the
main thread. But while that is happening, the main thread will be doing the
stage update that was already queued, without the new events (the input
thread is just starting to flush those). Then meta_flush_input() returns,
and in our test we see that the stage has been updated, except it wasn't
updated with the latest events. The test now continues and fails.
To fix the issue, make meta_flush_input() truly blocking, so that it only
flushes the input thread, but doesn't drive the global main context while
waiting for that. After the flushing is finished, tests must now manually
iterate the main context themselves to ensure that a stage update happens.
This breaks a few stacking tests, because "move_cursor_to" and "click" use
meta_flush_input() internally. For those commands we now need to dispatch
a stage update afterwards.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3807>
Let the ClutterFrame (or rather MetaFrameNative) own both the scanout
object and the framebuffer object, and let the frame itself live for as
long as it's needed. This allows to place fields that is related to a
single frame together, aiming to help reasoning about the lifetime of
the fields that were previously directly stored in MetaOnscreenNative.
Also take the opportunity to rename "current" to "presenting", to make
it clearer that frame's buffer is what is currently presenting to the
user.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3799>
It's possible to destory the xdg_toplevel and xdg_surface which removes
the surface role and then re-use the surface on a new toplevel.
Mutter used to not create new SurfaceActors for the new toplevel which
were then shared between the old and new toplevel. This happens because
the actors can stay around after the wl resource is destroyed (e.g. for
closing effects).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3667>
Instead of resetting in the xdg_surface.get_toplevel call.
It also changes XDG popus handling to deal with cases where the surface
was part of a window before, the same way the toplevel does.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3667>
Wayland tests also get kvm and tty test variants, but running tty tests
on your main session makes them fail. The intention for tty tests is to
skip when not run from a tty, so fix that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3811>
If view initialization fails then don't add the view, rather than
adding a dummy offscreen view. This avoids flooding the log with
offscreen frame clock confusion:
Before:
```
libmutter-WARNING **: 15:47:27.763: Failed to allocate onscreen framebuffer for /dev/dri/card0: Failed to allocate surface: Function not implemented
Clutter-WARNING **: 15:47:28.557: (../clutter/clutter/clutter-frame-clock.c:419):clutter_frame_clock_notify_presented: code should not be reached
Clutter-WARNING **: 15:47:28.563: (../clutter/clutter/clutter-frame-clock.c:419):clutter_frame_clock_notify_presented: code should not be reached
Clutter-WARNING **: 15:47:28.567: (../clutter/clutter/clutter-frame-clock.c:419):clutter_frame_clock_notify_presented: code should not be reached
(repeats forever)
```
After:
```
libmutter-WARNING **: 16:09:04.945: Failed to create view for Unknown 46" on None-1: Failed to allocate onscreen framebuffer for /dev/dri/card0: Failed to allocate surface: Function not implemented
```
Relates to:
https://launchpad.net/bugs/1967707https://gitlab.gnome.org/GNOME/mutter/-/issues/2489https://gitlab.gnome.org/GNOME/mutter/-/issues/2295
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3115>
AMD driver is buggy when it comes to generate textures of 1px height [1]
while this is not a mutter problem, we should not block on that either.
So, given that the test purpose is to check the journal flushing during
unref more than its behavior, we can still check this in all the drivers
keeping a warning in the AMD case.
See: https://gitlab.freedesktop.org/mesa/mesa/-/issues/11269
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3793>
Some tests sadly behaves differently depending on the driver in use.
While this shouldn't happen we can't block on these driver issues, so
add a test utils private function to get the driver information so that
we can adapt test behavior depending on this.
This will allow to disable / enable tests at runtime instead of failing
in all the implementations, which is still better for catching
regressions in the parts we may be ignoring otherwise.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3793>
When running the tests in non-undefined mode we should skip the known
failing tests instead of the whole suite, so mark them as such so that
we can still run the tests partially checking the things that still
work, avoiding to regress on them too.
We also run the tests in normal mode so that we can ensure that the
failures are still happening in that way.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3793>
We need to use a different $XDG_RUNTIME_DIR path to be able to start most
tests in parallel, and we can use a temporary directory for that which python
cleans up when done.
Also, given that most of settings are stored in HOME use temporary one
for that too, to prevent mutter to fail because it may load some local
configuration (e.g. monitors.xml) that don't meet the expectations or
that may change the test behavior in an unexpected way.
As per this, CI needs to be adapted for new args handling
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3793>
When testing mutter using `META_DBUS_RUNNER_WRAPPER=rr` we may get a
not found-device error, given that it's not a case we support, we can
ignore it as we do with permission denied one, limiting this to the RR
case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3793>
Showing the stage always results in an initial update being queued. If the
virtual input events from the test ends up being dispatched after that, the
`wait_for_update()` checks gets out of sync, as the first update ended up
waiting for the initial update, not the one from the input event.
Fix the gesture test by adding another call to `wait_stage_updated()` right
after `clutter_actor_show()`.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3521
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3795>
Allow a screen cast stream source to say that nothing changed in terms
of cursor metadata, and treat this together with a cursor-only frame as
we not recording anything.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3803>
We're not doing anything significant in the KMS thread anyway, so don't
make it a kernel thread, and don't ask to be real time scheduled (which
we wouldn't be anyway, but for clarity).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3805>
Don't try to find the card, and then the render node from it, just ask
udev to list the render nodes directly. This avoids running into
permission errors when the user cannot open /dev/dri/card* even without
mode setting capabilities.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3805>
By turning a macro that exists in the codebase to a proper
function so that gnome-shell could make use of it as well
instead of using a region for it contains_point api...
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3801>
And also "completion" time to measure when the commit returned.
This is structured so as to measure all timestamps first before logging
anything. That way our results shouldn't be (don't seem to be) affected
by the logging itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3265>
While it should not be expected that we pick the pointer into a
MetaSurfaceActor that is disembodied of its MetaWaylandSurface/MetaWindow,
the paths where this should be enforced are somewhat scattered.
So account for the situation in picking code, and prefer a NULL surface
over a crash. This operates on the assumption that this inconsistent state
where Mutter didn't know better to pick a correct surface actor will be fixed
by later crossing events resolving the intermediate state, and that no
other input events will be received meanwhile.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3393
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3729>
When unmapping a subsurface, it does lose early its connection to the
parent surface. This is however a deciding factor in determining whether
the surface (role) has a window.
Make the subsurface actor unreactive if its connection to the parent
MetaWindow was severed, since it should not be eligible for picking anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3729>
These actors are expected to be destroyed along with their surface, this
however happens later in the process, so there is a moment where actors
are eligible for picking, but do not have a surface anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3729>
Prior to the grabs/focus rework in !3420, Wayland grabs were handled
separately from ClutterGrabs. This required explicitly checking for
ClutterGrabs as those were expected to prevent events from reaching
Wayland clients.
Now after !3420, Wayland client grabs also result in ClutterGrabs, which
means that this check causes input events for popups with grabs to not
get sent to ibus anymore. Instead the events are getting sent to the
client directly, which results no ibus support in popups (unless the
client handles that itself by using a different GTK_IM_MODULE).
However due to the changes from !3420 checking for ClutterGrabs is also
no longer necessary and the meta_wayland_text_input_update() focus check
is now sufficient to only forward events to ibus, when the focus is
actually on a Wayland client. So to fix this we can simply remove the
check.
Fixes: 2a584a8f0 ("wayland: Make use of Wayland event grabbing mechanism")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3502
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3787>
Reads exposed size hints for the given cursor plane. Chooses nearest
minimum cursor size out of the hints with respect to the user chosen
cursor size from the UI. Allocates optimized Hardare cursor size,
hence drm buffer
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165>
Instead use an abstract "logical monitor id" that is generated from the
logical monitor. Instead of using low level numbers from the mode
setting devices, use either data from the EDID, or the connector, if the
EDID is not useful.
This should help with windows remembering monitor positions when the
same monitor reappears but with another mode setting device ID.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3753>
Replace the sync_focus() calls with a set_focus() do-it function taking
a surface. This is in line with the rest of the things that happen at
the default MetaWaylandEventInterface.focus implementation, and will
make these correctly observe the presence of grabs, since
meta_wayland_seat_get_input_focus() will return the would-be focus
in these cases.
This change makes the "focused" client selection truly
in sync with the keyboard focus.
Fixes: 5ca10c31d1 ("wayland: Follow seat's input focus client for clipboard selections")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3490
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3789>
Replace the sync_focus() calls with a set_focus() do-it function taking
a surface. This is in line with the rest of the things that happen at
the default MetaWaylandEventInterface.focus implementation, and will
make these correctly observe the presence of grabs, since
meta_wayland_seat_get_input_focus() will return the would-be focus
in these cases.
This change makes the "focused" client selection truly
in sync with the keyboard focus.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3498
Fixes: 9bdb00c459 ("wayland: Follow seat's input focus client for primary selections")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3789>
We were leaking the color profile path keys but also it wasn't clear how
the ownership was passed to the new hash-table, so let's just remove it
from the pending hash table and add it to the new one including the
expected reference.
This is safe because we were still adding a temporary extra ref to the
profile
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3788>
The cursor was following the "current" surface (i.e. the logical
focus, unaffected by e.g. grabs), so MetaWaylandPointer was always
providing window cursors, just so the MetaCursorRenderer would maybe
discard them and show the compositor cursor instead. E.g. in the
presence of grabs.
This clear barrier between grabs being compositor business deserving
a compositor cursor, and non-grabs being client business turned a bit
blurrier in grabs-pt5 where "client" things like popups and DnD would
also involve grabs. The fixes in that regard in the branch went on
the lenient side, introducing situations where grabs do exist but we
are preferring client-side cursors anyways.
Fix this by making MetaWaylandPointer aware of grabs at the time of
updating the client-side cursor, by following the "focus" surface
(i.e. the effective focus, affected by grabs outside of MetaWaylandInput).
The focus surface and cursor will be updated on focus changes, also
induced by grab changes.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3460
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3736>
In some cases, reparenting a window with its frame may fail; this seems
to happen especially during initialization of a window that may be
unmapped and re-mapped quickly and multiple times.
If this happens, we're never going to receive a remove event on the
stack tracker and so we may end up adding it twice to the list of the
windows to synchronize with the compositor, breaking its assumption that
the stack list is unique, and eventually leading to a crash because we
do not end up removing all the instances of a window on its destruction.
In particular we may end up in this situation:
Syncing Window 10485927: 0x555558863540 (actual xid is 10485927),
user time is 10485928 frame is 0x5555588715c0, frame xid 6291591
Syncing Window 14680081: 0x5555588664b0 (actual xid is 14680081),
user time is 14680082 frame is 0x555558871d80, frame xid 6291595
Syncing Window 6291460: 0x55555796dc80 (actual xid is 10485763),
user time is 10485764 frame is 0x555557a6f630, frame xid 6291460
Syncing Window 6291465: 0x555557a68af0 (actual xid is 14680067),
user time is 14680068 frame is 0x555557a73e80, frame xid 6291465
Syncing Window 6291509: 0x555557f9d830 (actual xid is 8388623),
user time is 0 frame is 0x555557fac780, frame xid 6291509
Syncing Window 6291586: 0x5555586e1690 (actual xid is 4194363),
user time is 0 frame is 0x55555886e550, frame xid 6291586
Syncing Window 6291591: 0x555558863540 (actual xid is 10485927),
user time is 10485928 frame is 0x5555588715c0, frame xid 6291591
Where the same meta window 0x555558863540 is added twice because that's
both mapped by the window itself (10485927) and by its frame (6291591).
This happens because for historical reasons the xids hash table managed
by the x11-display maps both the X11 windows, their frames and their
user time windows as the meta-window, and so if we don't filter out them
properly we end up duplicating the entries in the compositor list.
Such duplicates finally end up making mutter to crash in
meta_compositor_sync_stack() because we could end up trying to access
to an invalid window, given its actor has been destroyed but not all the
instances have been removed from the compositor windows list:
0x00007ffff71059 in meta_compositor_sync_stack (compositor=0x555555b8,
stack=0x555558701b80) at ../../mutter/src/compositor/compositor.c:773
773 if ((old_window->hidden || old_window->unmanaging) &&
(gdb) print old_window
$1 = (MetaWindow *) 0x0
So, in order to prevent this, check that XReparentWindow does not fail,
and in case of failure, reset the window state to the one it had before
we failed and more importantly, remove the association between the frame
X11 window and the MetaWindow, since this is not true anymore and so
that at the next stack synchronization there won't be any meta window
associated to that frame XID (unless there aren't further stack changes
impacting on that). Without this we would have instead waited for the
remove event that we predicted, but that could never happen because no
ReparentNotify is emitted in such case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3732>
Since we listen the X events in the same thread, and they are delivered
through the main loop, there's not any need to set the frame details on
windows before the reparent operation, because such action could fail.
So move the code order, as preparation for handling the error.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3732>
That was only there to force updating MetaFrame's bounds
but that is something that is already updated in
MetaWindowX11.move_resize_internal. So just drop all of that
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3254>
Since the `switch` didn’t have a default case, the `cull_front` and
`cull_back` variables could technically be used uninitialised if the
`cull_mode` was unrecognised.
That seems unlikely to happen as presumably other code makes sure the
`cull_mode` is valid, but it doesn’t hurt to add a `default:` case to
squash the compiler warning.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3770>
Depending on whether the input mapper was found, these variables could
indeed be used uninitialised, so this is a true positive warning.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3770>
For a Wayland only build, we would like to avoid linking against
libXcursor which on it turn, links back to some of the X11 deps.
In order to achieve that, we include a small subset of xcursor.
In case Mutter is built with X11 or with both Wayland & X11, we link
against libXcursor and don't make use of the in-tree implementation.
This patch mimics what GTK 4 do by shipping an in-tree copy of xcursor.
Especially that libwayland-cursor does not provide an alternative to
xcursor itself.
Helps #2272
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3607>
When meta_wayland_pointer_constraint_remove() is called, it can trigger
a meta_wayland_event_handler_invalidate_focus() via:
meta_wayland_pointer_constraint_destroy()
meta_wayland_pointer_constraint_disable()
meta_wayland_input_detach_event_handler()
meta_wayland_input_invalidate_all_focus()
meta_wayland_event_handler_invalidate_focus()
Which then would result in a "focus-surface-changed" signal which would
call meta_wayland_pointer_constraint_remove() a second time. This
happens after surface_remove_pointer_constraints() has already been
called in the first meta_wayland_pointer_constraint_remove() call,
leading to "data" being NULL.
To prevent this issue disconnect the signal handler before calling
meta_wayland_pointer_constraint_disable() when destroying a constraint.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3476
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3749>
