Several little changes were needed to make the CoglEuler documentation
appear:
• Fix the embeded docbook snippet in the CoglEuler section header
• Add the xinclude directive to the main document
• Add the missing <SECTION> in -sections.txt
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit c7f6e07f7b8ba0d7dc9604e888c8a46165ec3ed4)
This allows people to initialize a matrix with a translation
transformation. The options to do it at the moment were:
* init_from_array() but it give cogl no information about the type of
matrix.
* init_indentity() and then translate() but it means doing a lot of
computations for no reason.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 068b3b59221e405dc288d434b0008464684a7c12)
The stock 1.2.x version of SDL only supports regular OpenGL. The
version on WebOS is specially patched to add some extra API to request
a GLES1 or GLES2 context. This patch adds a configure check to detect
when Cogl is being built with the patched version of SDL. In that case
it will additionally allow the gles1 and gles2 drivers and set the
right video mode attributes to get the corresponding context.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3726c60deab2bd94617a562abb63f735627a25e4)
This fixes a few problems that occur when only using a GLES2 header.
• The use of GL_CLAMP_TO_BORDER and GL_MIRRORED_REPEAT were moved from
cogl-pipelinelayer-state.h to cogl-sampler-cache-private.h but the
corresponding defines were not.
• cogl-sampler-cache.c was using GL_TEXTURE_WRAP_R but this is only
defined as GL_TEXTURE_WRAP_R_OES from the GLES2 header so it needs a
#define.
• cogl-framebuffer-private.h uses GLuint but it does not include
cogl-gl-header.h. It gets away with this when GLX support is enabled
because the GL header would be included via glx.h.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9cdb87c864fc262c4b26c13963670d60d7c18058)
The function to convert the CoglBufferUpdateHint to a GL enum was
previously ifdef'd to only use GL_STREAM_DRAW when Cogl is compiled
with big GL support. One problem with this is that it would end up
trying to use it on GLES1 if support for both is compiled. The other
problem is that GLES2 seems to actually support GL_STREAM_DRAW so we
might as well use it in that case.
This patch also changes it so that if the hint is stream with GLES1
then it will default to GL_DYNAMIC_DRAW instead of GL_STATIC_DRAW
because I think that is closer to the meaning of the stream hint.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9e997476a7f9271bc000abdc82b1e343b92afb4c)
CoglMemoryStack was being typedef'd twice, once in the private header
as an incomplete struct and once in the C source with the actual
struct definition. This removes the second typedef so that it just
defines the struct.
This patch was written by Jack River.
https://bugzilla.gnome.org/show_bug.cgi?id=675119
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 75cd425a48e0fc403bf88eace212a6d37b65df11)
Cogl has feature flags for basic npot texture support and then separate
flags for npot + repeat and npot + mipmap. If those three features are
available then there is a feature for full-npot support too for
convenience. The cogl_texture_2d_new_ constructors were checking for
full npot support and failing if not available but since we expose the
fine grained features to the user the user should be able to check the
limitations of npot textures and still choose to allocate them.
_cogl_texture_2d_can_create() now only checks for basic npot support
when creating a npot texture. Since this change also affects the
automagic cogl_texture_ constructors they now check for basic npot +
mipmap support before considering using a Texture2D.
Notably the cogl_texture_ constructors will try constructing a Texture2D
even if we don't have npot + repeat support since the alternative is a
sliced texture which will need manual repeating anyway. Accordingly the
Texture2D::can_hardware_repeat and ::transform_quad_coords_to_gl vfuncs
have been made aware of the npot + repeat feature flag.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6f6c5734d076372d98d0ec331b177ef7d65aa67d)
This adds a version header which contains macros to define which
version of Cogl the application is being compiled against. This helps
applications that want to support multiple incompatible versions of
Cogl at compile time.
The macros are called COGL_VERSION_{MAJOR,MINOR,MICRO}. This does not
match Clutter which names them CLUTTER_{MAJOR,MINOR,MICRO}_VERSION but
I think the former is nicer and it at least matches Cairo and Pango.
The values of the macro are defined to COGL_VERSION_*_INTERNAL which
is generated by the configure script into cogl-defines.h.
There is also a macro for the entire version as a string called
COGL_VERSION_STRING.
The internal utility macros for encoding a 3 part version number into
a single integer have been moved into the new header so they can be
used publicly as a convenient way to check if the version is within a
particular range. There is also a COGL_VERSION_CHECK macro for the
very common case that a feature will be used since a particular
version of Cogl. There is a macro called COGL_VERSION which contains
the pre-encoded version of Cogl being compiled against for
convenience.
Unlike in Clutter this patch does not add any runtime version
identification mechanism.
A test case is also added which just contains static asserts to sanity
check the macros.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3480cf140dc355fa87ab3fbcf0aeeb0124798a8f)
When uploading the vertices the journal calls _cogl_matrix_entry_get()
to get a CoglMatrix for each journal entry so that it can so a software
transform. Since _cogl_matrix_entry_get() can be a performance hot-spot
and since it's trivial to keep track of the last CoglMatrixEntry seen we
now avoid repeatedly calling _cogl_matrix_entry_get() for sequential
entries with the same transform.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 70cad61533316e2303b8e188f2f361701dfb0c61)
This re-designs the matrix stack so we now keep track of each separate
operation such as rotating, scaling, translating and multiplying as
immutable, ref-counted nodes in a graph.
Being a "graph" here means that different transformations composed of
a sequence of linked operation nodes may share nodes.
The first node in a matrix-stack is always a LOAD_IDENTITY operation.
As an example consider if an application where to draw three rectangles
A, B and C something like this:
cogl_framebuffer_scale (fb, 2, 2, 2);
cogl_framebuffer_push_matrix(fb);
cogl_framebuffer_translate (fb, 10, 0, 0);
cogl_framebuffer_push_matrix(fb);
cogl_framebuffer_rotate (fb, 45, 0, 0, 1);
cogl_framebuffer_draw_rectangle (...); /* A */
cogl_framebuffer_pop_matrix(fb);
cogl_framebuffer_draw_rectangle (...); /* B */
cogl_framebuffer_pop_matrix(fb);
cogl_framebuffer_push_matrix(fb);
cogl_framebuffer_set_modelview_matrix (fb, &mv);
cogl_framebuffer_draw_rectangle (...); /* C */
cogl_framebuffer_pop_matrix(fb);
That would result in a graph of nodes like this:
LOAD_IDENTITY
|
SCALE
/ \
SAVE LOAD
| |
TRANSLATE RECTANGLE(C)
| \
SAVE RECTANGLE(B)
|
ROTATE
|
RECTANGLE(A)
Each push adds a SAVE operation which serves as a marker to rewind too
when a corresponding pop is issued and also each SAVE node may also
store a cached matrix representing the composition of all its ancestor
nodes. This means if we repeatedly need to resolve a real CoglMatrix
for a given node then we don't need to repeat the composition.
Some advantages of this design are:
- A single pointer to any node in the graph can now represent a
complete, immutable transformation that can be logged for example
into a journal. Previously we were storing a full CoglMatrix in
each journal entry which is 16 floats for the matrix itself as well
as space for flags and another 16 floats for possibly storing a
cache of the inverse. This means that we significantly reduce
the size of the journal when drawing lots of primitives and we also
avoid copying over 128 bytes per entry.
- It becomes much cheaper to check for equality. In cases where some
(unlikely) false negatives are allowed simply comparing the pointers
of two matrix stack graph entries is enough. Previously we would use
memcmp() to compare matrices.
- It becomes easier to do comparisons of transformations. By looking
for the common ancestry between nodes we can determine the operations
that differentiate the transforms and use those to gain a high level
understanding of the differences. For example we use this in the
journal to be able to efficiently determine when two rectangle
transforms only differ by some translation so that we can perform
software clipping.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
This adds a very minimal and fast allocator for chunks of memory of a
predetermined size. This has some similarities to the glib slice
allocator although notably it is not thread safe and instead of
internally tracking multiple magazines for various sized allocations the
api lets you explicitly allocate a single magazine for a single specific
size and a pointer to the magazine is passed explicitly to the allocate
and free functions.
This allocator builds on the CoglMemoryStack allocator as an underlying
heap allocator and just never rewinds the stack. This means the heap is
effectively a grow only linked list of malloc()'d blocks of memory.
A CoglMagazine tracks a singly linked list of chunks of a predetermined
size and _cogl_magazine_chunk_alloc() simply unlinks and returns the
head of the list. If the list is empty it falls back to allocating from
the underlying stack.
_cogl_magazine_chunk_free() links the chunk back into the singly linked
list for re-use.
The chunk size passed to _cogl_magazine_new() is automatically rounded
to a multiple of 8 bytes to ensure that all stack allocations end up
aligned to 8 bytes. This also ensures that when a chunk is freed then it
will be large enough to store a pointer to the next free chunk as part
of a singly linked list.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 17799c2f109a008d6cf767f501b81aa9b32bbda8)
This adds a very minimal internal allocator api that lets us create a
dynamically growable (grow only) stack.
Underlying the allocator is the idea of "sub stacks" which are simply
malloc()'d chunks of memory kept in a linked list. The stack itself
maintains a pointer to the current sub-stack and a current
sub-stack-offset. 99% of the time allocating from the stack is just a
case of returning a pointer to the current sub-stack + sub-stack-offset
and bumping the offset by the allocation size. If there isn't room in
the current sub-stack then we walk through the list of free sub-stacks
looking for one that's big enough for the allocation and if we reach the
end of the list then we allocate a new sub-stack twice as big as the
last (or twice as big as the requested allocation if that's bigger).
Since it's a stack model there is no api to free allocations, just a
function to rewind the stack to the beginning.
We expect this to be useful in multiple places in Cogl as an extremely
fast allocator in cases when we know we can scrap all the allocations
after we're done figuring something out or as a building block for
other allocators.
For example the tessellator used for CoglPath allocates lots of tiny
structures that can all be freed after tessellation.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6ee4a7a1b7f695bdfeb10ffa4112e776beea0a9d)
Since 5967dad2400d32c we have stopped using glib types such as guint16
and guint32 in favour of the equivalent c99 types such as uint16_t and
uint32_t. When that patch was tested we must have used a configuration
that just happened to include <stdint.h> because we have since seen that
builds can fail due to missing c99 typedefs. This patch explicitly
includes stdint.h in cogl-types.h.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit c1e2220a4314071482d2d5638688b6bcf83882a2)
The existing functions for stroking and filling a path depend on the
global framebuffer and source stacks. These are now replaced with
cogl_framebuffer_{stroke,fill}_path which get explicitly passed the
framebuffer and pipeline.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 713a8f8160bc5884b091c69eb7a84b069e0950e6)
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.
Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.
Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.
So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.
Instead of gsize we now use size_t
For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.
Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)
Since the original patch was done after removing deprecated API
this back ported patch doesn't affect deprecated API and so
actually this cherry-pick doesn't remove all remaining use of
CoglHandle as it did for the master branch of Cogl.
This adds a _COGL_STATIC_ASSERT macro that can be used for compile time
assertions in C code. If supported by the compiler this macro uses
_Static_assert so that a message can be printed out if the assertion
fails.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 465b39a764f2720e77678cafa56acb0e69007ffd)
The code for loading a CoglBitmap from a file was missed when
upgrading to the new cogl_bitmap_new_for_data function in commit
d18b59d9e6 so it wouldn't compile. This changes it to use
_cogl_bitmap_new_with_malloc_buffer to allocate the buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=672533
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5b785dd441a83024333e0a2f2b83d067f891194f)
cogl_path_new now takes a CoglContext pointer which it keeps a pointer
to instead of relying on the global context.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit afc63f8211c230f8fd1f7801f9085627c46a8661)
Since we can't change the api on this branch this just applies
the internal cleanups so we depend less on _COGL_GET_CONTEXT
This splits the GL header inclusion from cogl-defines.h into a
separate headear called cogl-gl-header.h which we will only include
internally. That way we don't leak GL declarations out of our public
headers. The texture functions that were using GLenum and GLuint in
the public header have now changed to just use unsigned int. Note
however that if an EGL winsys is enabled then it will still publicly
include an EGL header. This is a bit more awkward to fix because we
have public API which returns an EGLDisplay and we can't determine
what type that is.
There is also a conformance test which just verifies that no GL header
has been included while compiling. The test isn't added to
test-conform-main because it doesn't actually test anything at
runtime.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ef5680d3fda5df929dbd0b420c8f598ded58dfee)
cogl_framebuffer_draw_multitextured_rectangles is not in the public
API list, it is instead _cogl_framebuffer_draw_multitextured_rectangles,
which is private.
(Sorry, I forgot to add the reviewed by line for the same patch in the
cogl-1.10 branch :P)
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4fc6cf5e3c1478bc0a29dfaf2f6d9e84b9d29ccd)
We need to filter out all the *-egl-* sources as well, as the original
filter did not filter out the Wayland EGL sources
(Sorry, I forgot to add the reviewed by line for the same patch in the
cogl-1.10 branch :P)
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 3d4cb887a28d3bc2cde9e4e7cdd20a71c34a2eaa)
This re-works the SDL integration api to simplify the integration for
application developers and also allow Cogl to know when the application
is about to go idle waiting for events so it can perform idle
book-keeping work.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of creating a dummy framebuffer allocation just so we can setup
crtc modes during display_setup we now wait until the first swap_buffers
request before setting up the crtc modes.
This patch also adds a cogl_kms_display_queue_modes_reset() function
that allows developers to explicitly queue a reset of the crtc modes.
The idea is that applications that handle VT switching can use this for
VT enter events to explicitly ensure their mode is restored since modes
are often not automatically restored correctly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds support for mirroring the display output on two KMS
connectors.
This patch also checks for a number of environment variables that can
influence how KMS is configured. The following variables can be set:
COGL_KMS_MIRROR: If this is set to anything then Cogl will try and setup
two connectors with the same resolution so that onscreen frame buffers
can be mirrored.
COGL_KMS_CONNECTOR0: This can be set to an integer identifier for a
specific KMS connector id to use for the first output.
COGL_KMS_CONNECTOR0_MODE: Can be set to a mode name like "1024x768"
explicitly select what mode should be used for the first output.
If COGL_KMS_MIRROR is set then COGL_KMS_CONNECTOR1 and
COGL_KMS_CONNECTOR1_MODE can optionally be set to specify a connector id
and mode name for the second output.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The KMS EGL platform now notifies when a swap is complete. The
notification is delayed until the application calls
cogl_context_dispatch. The GLX backend doesn't currently do this but I
think that is how it should behave to make it easier for the
application to handle locks and such.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The KMS platform now uses drmModePageFlip to present the buffer. The
main loop mechanism is used to poll for events on the DRM file
descriptor so that we notice when the page flip is complete. The
swap_buffers is throttled so that if there is a pending flip it will
block until it is complete before starting another flip.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of creating FBOs on the GL side, the KMS EGL platform uses the
latest changes to Mesa to create an EGL surface using a GBM surface as
the native surface type. This removes some of the special vtable hooks
that the KMS platform needed because it is now much more similar to
the other platforms.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If a NULL display is passed to cogl_context_new() then it has to
implicitly create a CoglRenderer and CoglDisplay and propagate any
resulting errors back to the user. Previously the implementation relied
on passing a NULL renderer to cogl_display_new() as the means for
implicitly connecting to a renderer. The problem with this though is
that cogl_display_new() isn't designed to ever return NULL but if it
failed to connect to a renderer automatically it would do and then
cogl_context_new would pass NULL to cogl_display_setup() leading to a
crash.
This patch changes the implementation of cogl_context_new() to now
explicitly create a CoglRenderer and connect to it if a NULL display is
given. This way we can easily propagate any errors. In addition
cogl_display_new has been changed to abort if it fails to implicitly
connect to a renderer due to a NULL renderer argument.
An application needing to gracefully handle problems connecting to a
renderer at runtime should manually instantiate and connect a renderer
passing a GError argument to cogl_renderer_connect.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
cogl-sampler-cache-private.h was including a header which doesn't
exist so the build was broken. The header comes from a patch which
hasn't been pushed to master yet which splits including GL/gl.h out of
cogl-defines.h into a separate header. I added the inclusion to make
it pick up the GL defines but it doesn't need to do this yet because
cogl-context.h is still including the GL header. I didn't notice the
failure because I still had a cogl-gl-header.h lying around from a
previous build with the patch.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Mesa before version 8.0.2 has a slow read pixels path that gets used
with the Intel driver where it converts all of the pixels into a
floating point representation and back even if the data is being read
into exactly the same format. There is however a faster path using the
blitter when reading into a PBO with BGRA format. It works out faster
to read into a PBO and then memcpy back out into the application's
buffer even though it adds an extra memcpy. This patch adds a
workaround in cogl_framebuffer_read_pixels_into_bitmap when it detects
this situation. In that case it will create a temporary CoglBitmap
using cogl_bitmap_new_with_size, read into it and then memcpy the data
back out.
The main impetus for this patch is that Gnome Shell has implemented
this workaround directly using GL calls but it seems like the kind of
thing that would sit better at the Cogl layer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a CoglGpuInfo struct to the CoglContext which contains some
enums describing the GL driver in use. This currently includes the
driver package (ie, is it Mesa) the version number of the package and
the vendor of the GPU (ie, is it by Intel). There is also a bitmask
which will contain the workarounds that we should do for that
particular driver configuration. The struct is initialised on context
creation by using a series of string comparisons on the strings
returned from glGetString.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The Intel driver currently has an optimisation when calling
glReadPixels into a PBO so that it will use a blit instead of the Mesa
fallback path. However this only works if the GL_PACK_ALIGNMENT is
exactly 1, even if this would be equivalent to a higher alignment
value because the bpp*width is already aligned. To make it more likely
to hit this fast path, we now detect this situation and explicitly use
an alignment of 1. To make this work the texture driver needs to be
passed down the bpp*width as well as the rowstride when configuring
the alignment.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of having a series of if-statements this adds an inline
function to calculate the alignment directly using ffs which is
probably slightly faster. Admittedly this is a pointless
micro-optimisation but I think it makes the code looks a bit neater
anyway.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
GL_ARB_sampler_objects provides a GL object which overrides the
sampler state part of a texture object with different values. The
sampler state that Cogl currently exposes is the wrap modes and
filters. Cogl exposes the state as part of the pipeline layer state
but without this extension GL only exposes it as part of the texture
object state. This means that it won't work to use a single texture
multiple times in one primitive with different sampler states. It also
makes switching between different sampler states with a single texture
not terribly efficient because it has to change the texture object
state every time.
This patch adds a cache for sampler states in a shared hash table
attached to the CoglContext. The entire set of parameters for the
sampler state is used as the key for the hash table. When a unique
state is encountered the sampler cache will create a new entry,
otherwise it will return a const pointer to an existing entry. That
means we can have a single pointer to represent any combination of
sampler state.
Pipeline layers now just store this single pointer rather than storing
all of the sampler state. The two separate state flags for wrap modes
and filters have now been combined into one. It should be faster to
compare the sampler state now because instead of comparing each value
it can just compare the pointers to the cached sampler entries. The
hash table of cached sampler states should only need to perform its
more expensive hash on the state when a property is changed on a
pipeline, not every time it is flushed.
When the sampler objects extension is available each cached sampler
state will also get a sampler object to represent it. The common code
to flush the GL state will now simply bind this object to a unit
instead of flushing the state though the CoglTexture when possible.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Two of the meta texture constructors which take a flags parameter were
ignoring the COGL_TEXTURE_NO_AUTO_MIPMAP flag when creating an
underlying CoglTexture2D. These have now been fixed to call
cogl_primitive_texture_set_auto_mipmap after constructing the texture.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds public constructors which take a CoglBitmap to all primitive
texture types. This constructor should be considered the canonical
constructor for initializing the texture with data because it should
be possible to wrap any type of data in a CoglBitmap. Having at least
this single constructor avoids the need to have an explosion of
constructors such as new_from_data, new_from_pixel_buffer and
new_from_file etc.
The already available internal bitmap constructor for CoglTexture2D
has had its flags parameter removed under the assumption that flags do
not make sense for primitive textures. The meta constructor
cogl_texture_new_from_bitmap now just explicitly calls set_auto_mipmap
after constructing the texture depending on the value of the
COGL_TEXTURE_NO_AUTO_MIPMAP flag.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This interface represents any textures that are backed by a single
texture in GL and that can be used directly with the
cogl_framebuffer_draw_attributes family of functions. This currently
equates to CoglTexture2D, CoglTexture3D and CoglTextureRectangle.
The interface currently has only one method called
cogl_primitive_set_auto_mipmap. This replaces the
COGL_TEXTURE_NO_AUTO_MIPMAP flag from the CoglTextureFlags parameter
in the constructors. None of the other flags in CoglTextureFlags make
sense for primitive textures so it doesn't seem like a good idea to
need them for primitive constructors.
There is a boolean in the vtable to mark whether a texture type is
primitive which the new cogl_is_primitive function uses. There is also
a new texture virtual called set_auto_mipmap which is only required to
be implemented for primitive textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a context member to CoglBitmap which stores the context it
was created with. That way it can be used in texture constructors
which use a bitmap. There is also an internal private function to get
the context out of the bitmap which all of the texture constructors
now use. _cogl_texture_3d_new_from_bitmap has had its context
parameter removed so that it more closely matches the other bitmap
constructors.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The previous code to initialise the depth state on the default
pipeline wasn't initialising the magic number. If you later tried to
retrieve the depth state using cogl_pipeline_get_depth_state you would
end up with an invalid depth state struct and you would just get
warnings if you tried to use it for anything. This patch just replaces
the initialisation with a call to cogl_depth_state_init because it
uses the same values anyway.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
get_texture_bits_via_offscreen does not check the return value of
cogl_framebuffer_read_pixels_into_bitmap which results into never
using the fallback path texture_get_cb.
cogl_framebuffer_read_pixels_into_bitmap does not check whether the framebuffer
is properly allocated though; so fix that as well.
https://bugzilla.gnome.org/show_bug.cgi?id=673137
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This extension lets you upload texture data from a subregion of a
buffer by passing GL_UNPACK_ROW_LENGTH, GL_UNPACK_SKIP_PIXELS and
GL_UNPACK_SKIP_ROWS to glPixelStore. When this extension is available
the GLES texture driver will now avoid making a copy of the bitmap
when a subregion is used.
Note that Mesa doesn't currently advertise this extension but I've
made a patch to propose it:
http://lists.freedesktop.org/archives/mesa-dev/2012-March/020191.html
This extension allows an application to upload data in BGRA format. We
can use this to avoid a conversion in Cogl whenever it is given BGRA
data. This is quite useful when uploading data generated by Cairo
because at least on little-endian architectures that ends up as BGRA.
The patch just makes the pixel_format_to_gl implementation return
GL_BGRA_EXT for the data format and internal format whenever
COGL_PIXEL_FORMAT_BGRA_8888{,_PRE} is used.
A small caveat with this patch is that once a texture is created as
GL_BGRA, when later using glTexSubImage2D to update the texture it
must always be given data as GL_BGRA. Currently this just works out
because we store the internal format of a texture as a CoglPixelFormat
and we already swizzle the data if it does not match exactly on GLES.
However if we later switch to using a different enum for internal
formats then we might lose the ability to store the component ordering
so we'll have to think of another way to do this.
Cogl already had a vtable for the texture driver. This ended up being
used for some things that are not strictly related to texturing such
as converting between pixel formats and GL enums. Some other functions
that are driver dependent such as updating the features were not
indirected through a vtable but instead switched directly by looking
at the ctx->driver enum value. This patch normalises to the two uses
by adding a separate vtable for driver functions not related to
texturing and moves the pixel format conversion functions to it from
the texture driver vtable. It also adds a context parameter to all of
the functions in the new driver vtable so that they won't have to rely
on the global context.
Because the wayland-client-protocol.h header defines symbols that
collide with the wayland-server-protocol.h header we allow applications
to explicitly ensure that they are only including one at a time by
exposing corresponding <cogl/cogl-wayland-client.h> and
<cogl/cogl-wayland-server.h> headers. This also adds a missing guard to
cogl-texture-2d.h that it isn't included directly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The fallback code using stb-image.c was missed out in the upgrade to
cogl_bitmap_new_for_data from commit d18b59d9e6 so it wouldn't
compile.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
• The documentation for the framebuffer and texture interfaces had a
mis-matching open and close <note> tag so DocBook got upset and the
whole documentation disappeared.
• A lot of symbols from the cogl_framebuffer_* interface were missing
from the cogl-2.0-experimental-sections.txt file.
• cogl_framebuffer_frustum had the wrong version in its Since tag:
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_framebuffer_draw_multitextured_rectangles had a typo in the
function name in the declaration so it was generating a lot of
compile warnings.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds experimental 2.0 api replacements for the cogl_rectangle[_*]
functions that don't depend on having a current pipeline set on the
context via cogl_{set,push}_source() or having a current framebuffer set
on the context via cogl_push_framebuffer(). The aim for 2.0 is to switch
away from having a statefull context that affects drawing to having
framebuffer drawing apis that are explicitly passed a framebuffer and
pipeline.
To test this change several of the conformance tests were updated to use
this api instead of cogl_rectangle and
cogl_rectangle_with_texture_coords. Since it's quite laborious going
through all of the conformance tests the opportunity was taken to make
other clean ups in the conformance tests to replace other uses of
1.x api with experimental 2.0 api so long as that didn't affect what was
being tested.
This was causing the DocBook for the documentation to be invalid so
all of the framebuffer documentation disappeared.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public convenience wrapper around
cogl_framebuffer_read_pixels_into_bitmap which allocates a temporary
CoglBitmap to read into the application's own buffer. This can only be
used for the 99% common case where the rowstride is exactly the
bpp*width and the source is the color buffer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
In theory none of the journal flushing code should be using anything
that relies on the global framebuffer stack because it should all be
using the new 2.0-style API which explicitly mentions the target
framebuffer. Eventually we want to get rid of the framebuffer stack so
we might as well remove the push and pop now.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously when adding a quad to the journal it would assume the
journal belongs to the framebuffer at the top of the framebuffer stack
and store a reference to that. We eventually want to get rid of the
framebuffer stack so we should avoid using it here. The journal now
takes a pointer back to the framebuffer in its constructor and it
always retains the pointer. As was done previously, the journal still
does not take a reference on the framebuffer unless it is non-empty so
it does not create a permanent circular reference.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_shader_compile_real spews a warning when
shader compilation fails if COGL_GL_DEBUG is
defined. This warning is never freed.
https://bugzilla.gnome.org/show_bug.cgi?id=672243
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The 1.0 wrapper for cogl_path_curve_to was using the wrong value for
y_1 so it wouldn't work.
The patch was written by Dénes Almási.
https://bugzilla.gnome.org/show_bug.cgi?id=672174
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We initially assumed that copy_sub_buffer is synchronized on
which is only the case for a subset of GPUs for example it is not
synchronized on INTEL gen6 and gen7, so we remove this assumption
for now.
We should have a specific driver / GPU whitelist if we want to enable
this.
https://bugzilla.gnome.org/show_bug.cgi?id=669122
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
None of the other cogl_is_blah functions have a const pointer so this
is just for consistency. It helps if someone is trying to have an
array of type-check function pointers to determine the Cogl object
type because in that case all of the functions would have to have the
same prototype.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This creates a CoglBitmap which points into an existing buffer in
system memory. That way it can be used to create a texture or to read
pixel data into. The function replaces the existing internal function
_cogl_bitmap_new_from_data but removes the destroy notify call back.
If the application wants notification of destruction it can just use
the cogl_object_set_user_data function as normal. Internally there is
now a convenience function to create a bitmap for system memory and
automatically free the buffer using that mechanism.
The name of the function is inspired by
cairo_image_surface_create_for_data which has similar semantics.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
On GLES, when reading texture data back it may need to allocate a
temporary CoglBitmap if the requested format is not supported by the
driver. Previously it would then copy this temporary buffer back into
the user's buffer by calling _cogl_bitmap_convert which would allocate
a second temporary buffer. It would then copy that data into the
user's buffer. This patch changes it to create a CoglBitmap which
points to the user's data and then convert directly into that buffer
using the new _cogl_bitmap_convert_into_bitmap.
This also fixes a small leak where target_bmp would not get freed if
the target format and the closest supported format do match.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The 2.0 API for querying features (cogl_has_feature etc) does not
conflict with the old 1.0 API (cogl_features_available) so we might as
well enable it when the experimental API is requested without
requesting the 2.0-only API.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The if-undefined fallback declaration for GL_PACK_INVERT_MESA was
originally added in cogl.c along with code to use it (as part of commit
6f79eb8a5a). Later on, commit
10a38bb14f moved the code that used it to
cogl-framebuffer.c but didn't move the define along with it. Do that
now.
https://bugzilla.gnome.org/show_bug.cgi?id=672038
Reviewed-by: Neil Roberts <neil@linux.intel.com>
-Removed checks for COGL_ENABLE_EXPERIMENTAL_API since these APIs are
always built into the shared library
-Re-organised the API listing a bit so that they are in alphabetical order
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This API was re-added into COGL for the 1.10.x release as of commit
361bd516f. This will be removed once we branch into the 1.11.x development
cycle.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If the matrix was reallocated we would use values from the stack
for the matrix parameters. This fixes that and also uses the
function instead of out of lining the same code.
https://bugzilla.gnome.org/show_bug.cgi?id=671985
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This is only used internally when debugging is enabled to give a
human-readable name to a GL error so we shouldn't be exporting it
outside of the library. This just adds an underscore to the symbol
name. This shouldn't end up removing any public symbols from the 1.9.8
release because by default a non-git build disables debug so it wasn't
exported anyway.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The cleanup in 185630085 removed some symbols that were previously
exported as public experimental API in Cogl 1.9.8. That release is
already well after the point where we were meant to freeze the ABI so
we probably shouldn't be breaking it again. This patch adds the
removed functions back in so that for 1.9.10 we won't have to bump the
soname. The symbols are bundled together in a new file called
cogl2-compatibility.c so that they will be easy to remove again after
we can break ABI. It is expected that we will revert this patch
immediately after branching for Cogl 1.10.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
I don't think there's really any point in this cache because the
pipeline code completely owns the point size state. Pipelines are
already compared for whether their point size state is different
before setting it so it shouldn't result in any extra calls to
glPointSize apart from maybe when the first pipeline is initially
flushed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When using the GLSL vertend on GL, the point size was being flushed in
_cogl_pipeline_vertend_glsl_start. However, this function bails out
early if the pipeline already has a usable program so it would not hit
the code to flush the point size in that case. This patch moves the
code to _cogl_pipeline_vertend_glsl_end so that it will always be
flushed if it is different. That is the same place that is flushed for
the fixed vertend.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This option to GCC makes it give a warning whenever a global function
is defined without a declaration. This should catch cases were we've
defined a function but forgot to put it in a header. In that case it
is either only used within one file so we should make it static or we
should declare it in a header.
The following changes where made to fix problems:
• Some functions were made static
• cogl-path.h (the one containing the 1.0 API) was split into two
files, one defining the functions and one defining the enums so that
cogl-path.c can include the enum and function declarations from the
2.0 API as well as the function declarations from the 1.0 API.
• cogl2-clip-state has been removed. This only had one experimental
function called cogl_clip_push_from_path but as this is unstable we
might as well remove it favour of the equivalent cogl_framebuffer_*
API.
• The GLX, SDL and WGL winsys's now have a private header to define
their get_vtable function instead of directly declaring in the C
file where it is called.
• All places that were calling COGL_OBJECT_DEFINE need to have the
cogl_is_whatever function declared so these have been added either
as a public function or in a private header.
• Some files that were not including the header containing their
function declarations have been fixed to do so.
• Any unused error quark functions have been removed. If we later want
them we should add them back one by one and add a declaration for
them in a header.
• _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and
made a public function with a declaration in cogl-framebuffer.h
• Similarly for CoglOnscreen.
• cogl_vdraw_indexed_attributes is called
cogl_framebuffer_vdraw_indexed_attributes in the header. The
definition has been changed to match the header.
• cogl_index_buffer_allocate has been removed. This had no declaration
and I'm not sure what it's supposed to do.
• CoglJournal has been changed to use the internal CoglObject macro so
that it won't define an exported cogl_is_journal symbol.
• The _cogl_blah_pointer_from_handle functions have been removed.
CoglHandle isn't used much anymore anyway and in the few places
where it is used I think it's safe to just use the implicit cast
from void* to the right type.
• The test-utils.h header for the conformance tests explicitly
disables the -Wmissing-declaration option using a pragma because all
of the tests declare their main function without a header. Any
mistakes relating to missing declarations aren't really important
for the tests.
• cogl_quaternion_init_from_quaternion and init_from_matrix have been
given declarations in cogl-quaternion.h
Reviewed-by: Robert Bragg <robert@linux.intel.com>
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the
cogl-wayland-renderer api symbols.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Some of the state when flushing a pipeline depends on the current
framebuffer being used. These are:
• The matrix stack, so that it can flip vertically or not depending on
whether the framebuffer is offscreen.
• The colormask. This is combined with the framebuffer's color mask.
• The cull face mode. If the framebuffer is offscreen then backface
culling is translated to frontface culling and vice-versa.
These states were not working if the new framebuffer draw_primitive
API was used because in that case the framebuffer is not pushed to the
framebuffer stack so it would use the wrong one. This patch changes it
to use ctx->current_draw_buffer which is a pointer to the framebuffer
whose state was last flushed.
https://bugzilla.gnome.org/show_bug.cgi?id=670793
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a small cogl_bitmap_get_buffer public function. Note that
this can return NULL if the bitmap was not created with a pixel
buffer. It might be nice to change this eventually so that all bitmaps
have a pixel buffer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The idea is that CoglPixelBuffer should just be a buffer that can be
used for pixel data and it has no idea about the details of any images
that are stored in it. This is analogous to CoglAttributeBuffer which
itself does not have any information about the attributes. When you
want to use a pixel buffer you should create a CoglBitmap which points
to a region of the attribute buffer and provides the extra needed
information such as the width, height and format. That way it is also
possible to use a single CoglPixelBuffer with multiple bitmaps.
The changes that are made are:
• cogl_pixel_buffer_new_with_size has been removed and in its place is
cogl_bitmap_new_with_size. This will create a pixel buffer at the
right size and rowstride for the given width/height/format and
immediately create a single CoglBitmap to point into it. The old
function had an out-parameter for the stride of the image but with
the new API this should be queriable from the bitmap (although there
is no function for this yet).
• There is now a public cogl_pixel_buffer_new constructor. This takes
a size in bytes and data pointer similarly to
cogl_attribute_buffer_new.
• cogl_texture_new_from_buffer has been removed. If you want to create
a texture from a pixel buffer you should wrap it up in a bitmap
first. There is already API to create a texture from a bitmap.
This patch also does a bit of header juggling because cogl-context.h
was including cogl-texture.h and cogl-framebuffer.h which were causing
some circular dependencies when cogl-bitmap.h includes cogl-context.h.
These weren't actually needed in cogl-context.h itself but a few other
headers were relying on them being included so this adds the #includes
where necessary.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to read pixels from a framebuffer into a
CoglBitmap. This replaces the internal function
_cogl_read_pixels_with_rowstride because a CoglBitmap contains a
rowstride so it can be used for the same purpose. A CoglBitmap already
has public API to make one that points to a CoglPixelBuffer so this
function can be used to read pixels into a PBO. It also avoids the
need to push the framebuffer on to the context's stack so it provides
a function which can be used in the 2.0 API after the stack is
removed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Whenever the buffer is bound with _cogl_buffer_bind Cogl now ensures
the buffer's data store has been created. Previously it would only
ensure it was created when it was first mapped or when the first data
was set on it. This is necessary if we are going to use CoglBuffers
for retrieving data from GL. In that case the buffer won't be mapped
or have data set on it before it is used.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If the fast-path inplace premult conversion can't be used then it will
now fallback to unpacking the buffer into a row of guint16s and use
the generic conversion.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds _cogl_bitmap_convert_into_bitmap which is the same as
_cogl_bitmap_convert except that it writes into an existing bitmap
instead of allocating a new one. _cogl_bitmap_convert now just
allocates a buffer and calls the new function. This is used in
_cogl_read_pixels to avoid allocating a second intermediate buffer
when the pixel format to store in is not GL_RGBA.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If we are going to unpack the data into a known format anyway we might
as well do the premult conversion instead of delaying it to do
in-place. This helps because not all formats with alpha channels are
handled by the in-place premult conversion code. This removes the
_cogl_bitmap_convert_format_and_premult function so that now
_cogl_bitmap_convert is a completely general purpose function that can
convert from anything to anything. _cogl_bitmap_convert now includes a
fast path for when the base formats are the same and the premult
conversion can be handled with the in-place code so that we don't need
to unpack and can just copy the bitmap instead.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the bitmap code was setup so that there could be an image
library used to convert between formats and then some 'fallback' code
when the image library can't handle the conversion. However there was
never any implementation of the conversion in the image library so the
fallback was always used. I don't think this split really makes sense
so this patch renames cogl-bitmap-fallback to cogl-bitmap-conversion
and removes the stub conversion functions in the image library.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_bitmap_fallback_convert now supports converting to and from all
of the pixel formats, except it continues to preserve the premult
status of the original bitmap. The pixels are unpacked into a
temporary buffer that is either 8-bits per component or 16-bits per
component RGBA depending on whether the destination format is going to
use more than 8 bits per component (eg RGBA_1010102). The packing and
unpacking code is stored in a separate header which is included twice
to generate the functions needed for both sizes of unpacked data. The
hope is that when converting between two formats that are both 8-bit
sized, such as swizzling between BGRA and RGBA, then the
multiplications and divisions in the code will be optimized out and it
shouldn't be too inefficient. Previously the inner switch statement to
decide which conversion to use only operated on one pixel at a time so
it was probably relatively slow.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There are a few places in Cogl that try to set the premult bit on a
pixel format depending on whether it has an alpha channel. However
this breaks if the pixel format is alpha-only because premultiplying
data without any RGB components doesn't make any sense. This adds an
internal macro to check for cases where we should add the premult bit
called COGL_PIXEL_FORMAT_CAN_HAVE_PREMULT. This now gets used in all
places that previously just checking for COGL_A_BIT.
https://bugzilla.gnome.org/show_bug.cgi?id=671016
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The assert could use a 'default:' label but that would stop GCC from
giving a warning when a new enum value is added.
https://bugzilla.gnome.org/show_bug.cgi?id=671016
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The Wayland winsys defines functions declared in
cogl-wayland-renderer.h so it should include the header to make sure
the declarations are right. This was breaking because currently the
header #defines the _EXP suffixes on to the function names so it would
end up exporting the wrong symbol names.
This adds api for explicitly choosing what underlying driver cogl should
use internally for rendering as well as api for querying back what
driver is actually in use.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
cogl_texture_get_data uses find_best_gl_get_data_format from the
texture driver which returns the closest format to use for retrieving
pixel data given an intended format. However this function doesn't
know about the texture we are reading data from so it doesn't know
that the data we will actually receive will have the same premult
status as the texture's format. With the GL driver, this function ends
up returning exactly the same format as passed in which means it will
never do a premult conversion. Under GLES it always returns
COGL_PIXEL_FORMAT_RGBA_8888 so it will always make the data unpremult
even if the final requested format is premultiplied.
This patch fixes it so that it copies the premult status of the
closest_format from the format of the underlying texture. That way it
will later convert or not depending on the requested target format.
Note this patch breaks test-sub-texture with the GL driver because
that is incorrectly trying to read the texture data back as RGBA_8888
even though it depends on it not doing a premult conversion. The test
was already broken with GLES2 and remains broken.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If the GL_OES_packed_depth_stencil extension is available then we can
try creating a combined depth-stencil buffer with the
GL_DEPTH24_STENCIL8 format. This adds a private flag for the feature.
https://bugzilla.gnome.org/show_bug.cgi?id=666184
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The GL_DEPTH_STENCIL format for renderbuffers is defined in a separate
extension from GL_EXT_framebuffer_object so we probably shouldn't
being trying to use it unless that extension is advertised. This just
replaces the check for whether the driver is GL for a check for a
private feature flag before trying GL_DEPTH_STENCIL. The private
feature flag is set if the extension is available on GL.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If an application tries to bind an attribute to cogl_tex_coord_in then
on GLES2 it would try to directly use that as the name of the GL
attribute. However in the generated shader that is actually #defined
to cogl_tex_coord0_in so we need to remap the name. This adds a
parameter to validate_cogl_attribute_name so that it can optionally
return a real_attribute_name. If it doesn't set this then the calling
function will default to the Cogl attribute name.
This fixes test-texture-3d with the GLES2 driver.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Needed for _cogl_texture_get_type so that C4013 warnings/implicit
declaration of ... warnings can be avoided.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The previous update missed renames of certain cogl_framebuffer_* functions
to cogl_onscreen_*, and were not updated as the glib-mkenums-generated
header no longer included experimental headers
Also, all comments in cogl.symbols are now done in C-style so that the
preprocessor will filter them out when processing cogl.symbols instead of
using ';' for commments, which could be MSVC-only
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The previous update missed renames of certain cogl_framebuffer_* functions
to cogl_onscreen_*, and were not updated as the glib-mkenums-generated
header no longer included experimental headers
Also, all comments in cogl.symbols are now done in C-style so that the
preprocessor will filter them out when processing cogl.symbols instead of
using ';' for commments, which could be MSVC-only
-Make up for the missed cogl_texture_pixmap_x11_* symbols
-Removed texture_3d _EXP suffixes
-For newly-exposed public cogl_pipeline_get_layer_*_filter APIs
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Now if COGL_ENABLE_EXPERIMENTAL_2_0_API has been defined when including
cogl.h then headers that correspond to 1.x only apis that we plan to
drop won't be included any more.
If COGL_ENABLE_EXPERIMENTAL_API is defined then you can still mix and
match 2.0 api with 1.x api in a single compilation unit.
Note: it's still possible that some 1.x symbols will still be available
when COGL_ENABLE_EXPERIMENTAL_2_0_API is defined since this patch
doesn't go through the shared headers adding guards around deprecated
functions.
This only affects people playing with the experimental api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This also replaces use of CoglHandle with a CoglTexturePixmapX11 type
instead.
This patch also ensures the CoglTexturePixmapX11 constructor take an
explicit CoglContext pointer and can return a GError consistent with
other CoglTexture constructors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This moves all the cogl_framebuffer_ apis relating to swap buffer
requests into the cogl_onscreen_ namespace since on CoglOnscreen
framebuffers have back buffers that can be swapped.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
As we move towards Cogl 2.0 we are aiming to remove the need for a
default global CoglContext and so everything should be explicitly
related to a context somehow. CoglPipelines are top level objects and
so this patch adds a context argument to cogl_pipeline_new().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There were several members of the CoglContext struct using the
CoglHandle type for things that now have replacement typedefs which
this patch fixes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl-texture-3d
api symbols.
This patch also replaces use of CoglHandle with a CoglTexture3D type
instead.
Finally this patch also ensures the CoglTexture3D constructors take an
explicit CoglContext pointer but not a CoglTextureFlags argument,
consistent with other CoglTexture constructors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously for the wireframe debug mode we identified the users
"cogl_position_in" attribute, mapped that, created a replacement
attribute with a LINE_LIST topology and then drew the attribute with a
simple pipeline with a green colour. This meant we completely discarded
the users original pipeline which may have involved vertex processing
that would be useful to visualize in the wireframe.
The new approach instead keeps the users attributes and instead
generates CoglIndices that can be used to refererence the original
attributes in LINE_LIST topology and instead of scrapping the user's
pipeline we now create a weak copy of the original pipeline and just
replace the fragment processing with a snippet to force the output color
to be green.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This improves the implementation of _cogl_pipeline_equal() to ensure
that the cost of the function scales by the number of bits set in the
pipelines_difference variable set after calling
_cogl_pipeline_compare_differences() instead of scaling by the number of
state groups cogl tracks.
As Cogl tracks more and more state groups we don't want
_cogl_pipeline_equal() to get slower.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If setting NULL user data via cogl_object_set_user_data() and we fail to
find an entry for the given key then bail out before potentially
allocating a new entry since setting NULL data is documented to
effectively delete an entry.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This exposes cogl_pipeline_get_layer_{min,max}_filter functions so that
applications can query back the filters set using
cogl_pipeline_set_layer_filters().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The _cogl_texture_driver_pixel_format_to_gl functions for OpenGL and
OpenGLES convert CoglPixelFormats into corresponding gl enums that can
be used to upload texture data. Previously we were only handling a few
specific formats but this patch updates the functions to handle all the
formats we know about. The functions now also switch() on the format so
that we will get build time warnings if we forget to handle new formats
in these functions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=660188
edit: tweaked the internal format returned by pixel_format_to_gl();
handled 1010102 formats and rebased -- Robert Bragg
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The previous detection was based on bits per pixel only and would
consider bpp >= 24 as X888 or 8888 24-bit color depth formats.
This commit ensures we now use the newly added
_cogl_util_pixel_format_from_masks() api that returns a CoglPixelFormat
according to channel masks and color depth. This helps to add support
for more pixel formats.
https://bugzilla.gnome.org/show_bug.cgi?id=660188
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a utility function for inferring a CoglPixelFormat from a
set of channel masks, a bits-per-pixel value, a pixel-depth value and
pixel byte order.
This plan is to use this to improve how we map X visuals to Cogl pixel
formats.
This patch was based on some ideas from Damien Leone <dleone@nvidia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=660188
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a comment to cogl-types.h where we define all the
CoglPixelFormat enums to give lots of information about the internal
representation of the format and to explain how new formats should be
allocated.
This information came from the discussion in bug #660188
Reviewed-by: Neil Roberts <neil@linux.intel.com>
30-bit color depth formats are defined by using value 13 in the least
significant nibble of the pixel format enumeration. This nibble
encodes bytes-per-pixel and byte alignment.
The _cogl_pixel_format_get_bytes_per_pixl() function is updated
accordingly to support these new formats.
https://bugzilla.gnome.org/show_bug.cgi?id=660188
edit: dropped the X101010 formats but also added 1010102 formats since
Cogl avoids exposing any padded formats and leaves it to applications to
consider the A component to be padding as needed. -- Robert Bragg
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although these are in the public headers we should assume that no one is
using them since they were never documented so no could know what they
are useful for.
If you were to guess you'd be forgiven for thinking they were bitmasks
for checking some flags to see if a format is 24 or 32 bits. If you
looked further you might instead be forgiven for thinking that if you
masked of the least significant nibble of a pixel-format then you could
check the value against these defines. Neither of the previous
operations are reliable ways to check if a format is 24 or 32bit and
instead code must use then internal
_cogl_pixel_format_get_bytes_per_pixel() api if they want to know the
pixel size for a given format which relies on a 16 entry lookup table
using the least significant nibble of a pixel-format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although it's in a public header nothing should be using this define
since it's not documented what it could be used for. The cases where we
were using it internally were quite fragile because they were trying to
mask information from the least significant nibble of CoglPixelFormat
but really that nibble just has to be dealt with using lookup tables.
The least significant nibble of a pixel format gives information about
the bytes per pixel and whether the components are byte aligned but the
information needs to be accessed using
_cogl_pixel_format_get_byes_per_pixel() and
_cogl_pixel_format_is_endian_dependant().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since (A & ~COGL_PREMULT_BIT) is basically as readable as (A &
COGL_UNPREMULT_MASK) this patch removes the mask define. Without the
mask the code is slightly more explicit and there's less risk in error
caused by us forgetting to update the COGL_UNPREMULT_MASK if the way
CoglPixelFormat is defined evolves.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds an internal utility function
_cogl_pixel_format_is_endian_dependant() that can query whether
accessing the components of a given format depends on the endianness of
the current host CPU or whether a pixel can be loaded as a word and
channels accessed using bit masking and shifting.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This moves _cogl_get_format_bpp from cogl-bitmap.c to cogl.c and renames
it to _cogl_pixel_format_get_bytes_per_pixel. This makes it clearer that
it doesn't return bits per pixel and makes the naming consistent with
other cogl api. The prototype has been moved to cogl-private.h since it
seems we should be aiming to get rid of cogl-internal.h at some point.
The patch also adds a simple gtk-doc comment since we might want to make
this api public.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
So we can get to the point where cogl.h is merely an aggregation of
header includes for the 1.x api this moves all the function prototypes
and type definitions into a cogl-context.h and a new cogl1-context.h.
Ideally no code internally should ever need to include cogl.h as it just
represents the public facing header for accessing the 1.x api which
should only be used by Clutter.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Ideally we wouldn't have exposed cogl-texture-pixmap-x11.h as a
top level header and would have just automatically included it in cogl.h
but we already have code that assumes it can be directly included.
This ensures we define __COGL_H_INSIDE__ as a reminder that it is a top
level header in case we later need to include other cogl internal cogl
headers which would cause a build time error without this defined.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The cogl_public_h variable in cogl/Makefile.am was a mixture of 1.x
headers and experimental headers which meant that glib-mkenums was
processing lots of experimental api headers. This patch lists
experimental api headers under the cogl_experimental_h variable instead.
This patch also ensures we undef the COGL_ENABLE_EXPERIMENTAL_* defines
when running the gobject introspection scanner for Cogl-1.0.gir
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The get_all_uniform_values function tries to walk the parent hierarchy
of pipelines to find pipelines overriding the uniforms state and then
grabs the values from the override. However it was accessing data
inside the ‘big state’ even if the pipeline didn't override the
uniforms state so it would crash if it encountered a parent pipeline
with no big state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The snippet hook COGL_SNIPPET_HOOK_TEXTURE_LOOKUP now gets passed an
extra variable called cogl_sampler which is the sampler attached to
this layer. For example this will be useful when implementing the blur
effect in Clutter so that it can make the texture hook for that layer
sample the texture multiple times.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There might be custom hooks that want to sample arbitrary layers
even though they aren't referenced as part of the auto generated layer
combine code. This ensures the sampler uniforms are always output for
non-null layers so at least these can be used.
We may consider changing this later to always emit a wrapper
cogl_sampleX() function for each layer so all samples of a layer can
consistently be modified by a COGL_SNIPPET_HOOK_TEXTURE_LOOKUP hook.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When generating GLSL code, the names of the builtin uniforms for the
sampler and the layer constant have been renamed to use the layer
number not the unit number. This will make it easier if we ever want
to make them public.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
In a combine string the application can specify TEXTURE_? as a source
to sample from the texture attached to a particular unit. The number
specified here was being interpreted as a unit index. This is not
helpful to applications because theoretically the unit index is an
internal implementation detail so they can't reliably determine what
it is. This patch changes them to be interpreted as layer indices
instead.
To make this work the enums in CoglPipelineCombineSource are no longer
directly mapped to GLenums. Otherwise it implies a low limit on the
number of layer indices because there are only 32 reserved numbers
between GL_TEXTURE0 and GL_ACTIVE_TEXTURE.
This also fixes a bug in the ARBfp fragend where it was generating
code using the texture type of the layer doing the referencing rather
than the layer that was being referenced.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds _cogl_pipeline_get_layer_with_flags which takes a set of
flags to modify the behaviour. The only flag currently available is
one to disable creating the layer if the layer index does not already
exist.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to replace the texture for a layer with
the default white texture. It is equivalent to calling
cogl_pipeline_set_layer_texture with NULL for the texture object
except that it also lets you choose a type for the texture. The idea
is that applications using a base pipeline to make multiple copies
that can share the generated shaders can use this function to make the
layer come into existence with the right texture type. Previously the
idiom would be to create a 1x1 dummy texture of the right type but
this ends up creating lots of redundant little textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When comparing the texture data for a pipeline layer it tries to get
the GL texture handle out of the texture object. However it's valid
for a layer to have a NULL texture object but in that case the code
would just crash. This patch fixes it to compare the texture types
when the texture object is NULL.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of storing the GLenum for the target of the last used texture
for a layer it now stores the CoglTextureType instead. The state name
has been renamed to 'texture type' instead of 'texture target'.
Previously the default pipeline layer would store 0 here to represent
that there is no texture. This has been changed to store
COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers
always have a valid value for the texture type. Any places that were
previously fetching the texture from a layer to determine the target
(for example when generating shaders or when enabling a particular
texture target) now use the texture type instead. This means they will
work even for layers that don't have a texture.
This also changes it so that when binding a fallback texture instead
of always using a 2D texture it will now use the default texture
corresponding to the texture type of the layer. That way when the
generated shader tries to do a texture lookup for that type of texture
it will get a valid texture object. To make this work the patch adds a
default texture for 3D textures to the context and also makes the
default rectangle texture actually be a rectangle texture instead of
using a 2D texture.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds an internal function to get the type of the underlying
hardware texture for any CoglTexture. It can return one of three
values to represent 2D textures, 3D textures or rectangle textures.
The idea is that this can be used as a replacement for
cogl_texture_get_gl_texture when only the target is required to make
it a bit less GL-centric. The implementation adds a new virtual
function which all of the texture backends now implement.
The enum is in a public header because a later patch will want to use
it from the CoglPipeline API. We may want to consider making the
function public too later.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Just being a bit paranoid here, as the SDL winsys sources are dealt in the
projects as they are not built for all configurations to avoid them
included more than once in the projects, which can cause trouble.
https://bugzilla.gnome.org/show_bug.cgi?id=669785
Reviewed-by: Neil Roberts <neil@linux.intel.com>
-Adapt to the removal of _EXP mangling from many of the experimental
functions
-Adapt to newly added/replaced APIs
-_cogl_handle_atlas_texture_get_type is gone
https://bugzilla.gnome.org/show_bug.cgi?id=669785
Reviewed-by: Neil Roberts <neil@linux.intel.com>
-Add a define for COGL_HAS_GLIB_SUPPORT, the Visual C++ projects will build
GLib support for COGL for all builds at this time, unless there is a
significant call for the need of a COGL Visual C++ build with no
dependency on GLib
-Pre-define COGL_SYSDEF_POLL* as listed in the default values in commit
74974752 since Windows does not have poll.h and thus does not have special
values for these.
https://bugzilla.gnome.org/show_bug.cgi?id=669785
Reviewed-by: Neil Roberts <neil@linux.intel.com>
All CoglBuffer constructors now take an explicit CoglContext
constructor. This is part of the on going effort to adapt to Cogl API so
it no longer depends on a global, default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
